Database Info

Wich WM6 ROM can connect to WPA Wifi

There are so many images to find here, but i'm looking for the latest one that can connect to WPA. Can someone tell me wich one i can use.

Went back to wm5, (latest Version),there were just to many problems with the wm6 roms.even my tmc quit working for me with the wm6 roms,back to wm5 everything is working fine again.

no problem with jrightmcps 2.02.00

gonna test that 2.02.00 version. hope that ones worked fine with WPA. will let you know

jrightmcps 2.02.02 works fine connected to WPA.
Not had any problems with the WLAN side, just Bluetooth can be funny sometimes, worked fine for over a month then started stopping at random intervals, icon on start page still showed BT as enabled, but comm manager showed as stopped. Once that happens either a soft reset or going into flight mode fixes it.

flashed to 2.2.0 version but still can't connect to wifi. after looking further i say my router is configurate as WPA TKIP+ AES maybe thats why i can connect. gonna test the settings tonight on my router.

I used to use Darkforce, and I'm pretty sure I connected to a WPA2 router before. (I could be wrong though, that was awhile ago)

ie tried many roms and then i flashed jwrightmcps 2.02.00 for his wonderful wifi connectivity. i use it both with wep lans and wpa (tkip) lans without any problem.

Rockafello said:
flashed to 2.2.0 version but still can't connect to wifi. after looking further i say my router is configurate as WPA TKIP+ AES maybe thats why i can connect. gonna test the settings tonight on my router.
Click to expand...
Click to collapse
That is WPA2 then, can only connect via WPA (WPA-PSK or TKIP).

Internet Connection Sharing over WiFi

I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers

its built in i think in the commanager last option. but it is set to bluetooth pan standard if i am correct.
you can try use advanced config 3.1 and goto data connections.. change private interface for internet sharing to wlan.

i was surprised to see Advanced Config had the option there. But it still doesn't work
I changed the private interface from the default of 'Custom' to WLAN11g1 and it asks me to soft-reset the device, which i did. Then I go into Internet Sharing, and I still only get 'USB' or 'Bluetooth PAN' as options. Am i missing something?

there is another wlan option in there.
i have no idea how this is supposed to work :/
one would think that setting this option would set the setting to wlan as supposed to. not sure if you should change it or not afterwards with the connectionsharingsettingstab. it probably overwrites the value in registry.
here is something you can try :
turn on wifi
set the option in adv config to TnetWln1
reset
turn on this wifi AP application and try using it

WMwifiRouter
Just tried WMwifiRouter on my Touch Pro and it worked fine

Works fine for me too. Takes all the hassle out of it!

adityasen said:
I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers
Click to expand...
Click to collapse
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....

Manni01 said:
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....
Click to expand...
Click to collapse
ICS has nothing to do with your carrier. It works the same way on your phone as it does on the pc. it merely routes the gateway to the devices connected to the ICS network.
I myself have a TP and use ICS with Softbank (softbank roms do not contain ICS) and it works fine.
I agree with you however, when it comes to bluetooth. Even if your PC doesnt have BT, it is well worth it to buy one of those nifty mini adapters.
they are so tiny, you wont even see them. But easy to setup and fast enough.

im with 3. nomal mail / web works fine. there are no restrictions by the network for ics. as for the BT question, I dont have BT on my laptop. it has built in wifi and i want to use that. i also have a mac n have never managed 2 get BT PAN working with os x.

Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.

latest version works ok
Mod Edit: Attachment removed by request from the author.

the latest version is 1.10 not 0.94. have tried it with not much luck

adityasen said:
the latest version is 1.10 not 0.94. have tried it with not much luck
Click to expand...
Click to collapse
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually

da_jojo said:
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually
Click to expand...
Click to collapse
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.

henkreyn said:
Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.
Click to expand...
Click to collapse
First make sure you have no active BT connection, either on your desktop/laptop or on the TP (i.e. BT Headset).
You need to go to Comm Manager (BT switched on of course!), select BT Options (lower right menu), Mode, and select "make this device visible to other devices".
Once you've setup a partnership, it will probably say "connection denied" on the first connection.
Don't be as dumb as me, got to internet sharing (all programs) and select BT Pan and Connect... Then try to connect BT Pan again...
It *should* work (works a treat on my Vista 32 desktop and my Sony TZ11 Laptop, I get around 400-500kbps down and a bit less up).

BT PAN
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.

Maybe you should try IcsControl.
It's free and works great.

Id go wmwifirouter route. I have never had good luck with icscontrol never could get it to work and it pissed me off instead

henkreyn said:
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.
Click to expand...
Click to collapse
You need to update the bluetooth driver for your laptop. Check the manufacturer (in, the device manager), usually widcomm or toshiba, and try to get it from their website if HP doesn't provide it (although they should). Vista drivers usually work, but I guess you're using XP? It may be worth checking on HP website to see if their offer updated BT drivers for your laptop.

Nighthawk said:
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.
Click to expand...
Click to collapse
I've tried both versions of the program (free old V0.91 and trial for the commercial V1.11).
They both work with the Touch Pro (tried with my Vaio TZ11).
V1.11 is however around 20% faster (I get an average of 500kbps with V0.91, and consistently above 600kbps down with the V1.11).
So the old version gives about the same bandwidth as my BT Pan (without the convenience of sharing between more than one client), while the V1.11 seems to be better optimised and provides better bandwidth.
The response time is around 100ms for both (against around 140ms for BT Pan). Upstream is around 300kbps for both version , against 400kbps for BT Pan.
This is on a UK T-Mobile HSDPA connection, with 3/4 bars signal strength (could those who manage to get it to work let us know if they get better figures?).
You should obviously get much better with Vodafone in a 7.2Mbps area like London/Major airports.

Raphael: Wifi can not connect to any encrypt connection, any help?

My TouchPro can connect normally to unsecured wifi networks, but with WPA encrypted ones, it can only connect for the first time, after that it can not.
At home I have a wireless router/ADSL modem (Zoom X6) that is connected to my PC by cable, all my phones and laptops connect to internet via wifi. While other phones (1G iPhone) and laptops always connect successfully, the TP only connected once and then cannot or unable connect to the WPA security-enabled wireless network (although it's able to scan and detect the availability of the Wifi network). I tried to reset the router settings, even update router firmware, but no luck, it's still unable connect. I also tried with my office secured wifi network and I had the same problem.
Yesterday, I had to hardreset my TP and tried to connect once again, but problem was repeated, connected only once and after that, unable. Note that my previous PPC (TMobile Ameo WM5) didn't have any problem with the same wifi router and the same wifi settings (as follow).
My TP wifi settings:
Network Name: MyNetwork
Connects To: The Internet
Uncheck "This is a hidden network"
Next step:
Authentification: WPA-PSK
Data Encryption: TKIP
Greyed Out: The key is automatically provided
Network Key:************** (my pass)
Greyed Out: Key Index: 1
Next,
Checked "Use IEEE 802.1x network access control" but greyed (I can't change this)
Anybody know the solution for this issue?
Thanks and very appreciated for any help.

i experienced similar problems with my old p4350 but not yet with the TP...
no solution, sorry. but im quite unhappy that this issue still exists...

Any suggestion, pls.

yeah.. quite sucky.. I though the WiFi 'broke'.. but i was able to connect to a WEP site.. I think its something to do with WPA.
I never had this problem with my Diamond. The firmware on Diamond isso much more stable compared to Touch Pro..

I set everything to WEP and my key is open instead of shared, and now it works fine.
I had issues at my dad's, who has no encryption, and also there, when I set the key to open io shared, I got connection. (even though there is no key
anyway, it looks like that is the bug (at least in my device)

I have exactly same settings and same problem... but I want to use this encrypted connection since in future I will have to connect also in other places where I need it for sure.
Any help here?

I have similar promblem with my Hermes before.
My wireless router is running "Turbo-G" mode, my Hermes can't connect it with Turbo-G mode On.
After I change the wirless mode from Turbo-G to "g/b", my Hermes can connect it without any problem.

I tryed that and does not work...
strange is that is was working in the past and on router I did no changes but on TP I installed just some apps which should not affect this...
Only what could affect is Advanced config which I installed...
So where else can be problem?
How can I troubleshoot this?
Signal kvality is good but still keeps dropping and does not obtain IP from router.

mine works fine...not that that helps you in any way

I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.

I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...

hung_ng said:
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
Click to expand...
Click to collapse
You are merely restricting people from connecting to your router.. without encryption, you are sending unsecure packets all over..

Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
I tried the PT using unsecured routers, WEP and WPA and all of them worked fine with stable connectivity.
The routers I have tried (without any problems) so far are:
1. Linksys WRT-54G running Tomato firmware
2. Linksys WRT-54G running DD-WRT firmware
3. D-Link DIR-655 running latest firmware
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues...
I am not using a custom ROM.
I hope this helps in some miniscule way.
Good luck.

Minus-1 said:
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
....
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues....
Click to expand...
Click to collapse
I was about to say the same thing...
Not having any issues with my girlfriends WPA secured router. It's on WPA2-PSK and AES encryption. Enter key first time (case sensitive!!), and of you go... Connecting without trouble ever since

hmm..Funny mine still can't connect to my home WPA2, AES or TKIP.. I'm on the Buffalo Tomato firmware..

WIFI not connecting
This solution worked for me!! Excellent. This was a right pain!
thedino said:
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
Click to expand...
Click to collapse

I've got the sollution, everybody on this forum probably has advance config installed, the program sets some default value's of it's own, set the WPA authentication under network in the advance config program to disabled and it will work again. Anyways, that worked for me

I've removed WiFi settings and then I edited settings again. It works now

Raphael Wifi problems
I bought this Fuze to replace my trusty Dash since I broke the antenna on my Dash. I'm running NRG Magic, but have tried other NATF and other ROMs as well, I cannot get this phone to connect to my wifi network I'm using WPA2-PSK but have disabled security for testing. My Dash and my laptop connect immediately with no problems. If I cannot get wifi going on this Fuze I'm afraid I'll have to put it on Ebay and try the Iphone, which people seem to love.
The Fuze did connect once, and it was WPA2-PSK at the time, I don't remember what ROM I was using at the time probably an NRG flavor, but Ihave had _no_ luck since.
Should I flash to 'official' ROM? Honestly I'm getting tired of playing with this thing I don't have the time.
Any help would be appreciated.
Thanks,
Marc

I may have found something
Check your time zone/daylight savings settings on your router. Phone and router time must be in sync.

WIFI problems related to WEP (and other encryptions) is hardware or software? HELP!!

I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H

AFAIK, Raphael connects to WEP, WPA, WPA2(TKIP/AES)...
did you try deleting all the wifi settings and reconnecting?
or hard reset?

jewelkobayashi said:
I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H
Click to expand...
Click to collapse
I completely understand what you are going through & I am going to suggest something for you but the results might vary.
Make sure that Wi-Fi is turned off.
Open your Comm Manager | Settings | Wireless LAN.
When you're in the Wireless LAN Settings panel, select Power Mode.
Slide the selector to Best Performance.
Tap OK & when you're back in the Comm Manager, turn on the Wi-Fi adapter.
Setup your work connection & see if your internet connections work.
One thing to note, while this has resolved my connectivity problems, the settings are not always saved for some unknown reason.
So, be prepared to key in the settings again.

I resorted to everything , not leaving anything to chance, and did many things at once.
It is now fixed, it seems, but at great cost in terms of time, and I cannot be sure which one of these was actually helpful.
But I hard-reset the TP, as well as updating the firmware on both the modem and the WIFI router, and then did hard reset on them too...
I cannot judge on what turned out to be true on other peoples' TP, but for me at least, for both TyTn II and Touch Pro I am currently using, setting connection from "internet" to> "Work" did not help at all....
Thanks anyways...

HTC CM Wifi Internet Sharing - doesn't work?

Hi,
Now that I've unlocked my TG01, I was hoping to use my data SIM in it and convert it to a MiFi, one of those portable WiFi access points.
I have tried HTC CM Wifi Internet Sharing which installs fine on the phone. It also seems to run and looks like it has set up an ad-hoc network.
However, there are a few problems:
The WiFi does not automatically turn on when you launch the program.
None of my WiFi enabled devices (PCs, phones, internet tablets) can 'see' the WiFi access point.
I'm just wondering whether this is because the program isn't really working, or has something to do with my other devices.
Anyone have success with this program?

Hey i use WMWifi Router app on my tg01 but it is only a trail

i successfully installed cm wis but can't seem to get on internet. i don't know what else to try. the help file on the program doesn't offer much help. any suggestions? or is there another program like this? i can see and connect to the access point just can't get on net

ZSX said:
Hi,
Now that I've unlocked my TG01, I was hoping to use my data SIM in it and convert it to a MiFi, one of those portable WiFi access points.
I have tried HTC CM Wifi Internet Sharing which installs fine on the phone. It also seems to run and looks like it has set up an ad-hoc network.
However, there are a few problems:
The WiFi does not automatically turn on when you launch the program.
None of my WiFi enabled devices (PCs, phones, internet tablets) can 'see' the WiFi access point.
I'm just wondering whether this is because the program isn't really working, or has something to do with my other devices.
Anyone have success with this program?
Click to expand...
Click to collapse
on my TG01 work fine! i have in all my cooked ROM´s this suite
AL_CommManager_Suite_with_WifiSharing_1_1.cab
you can test my ROM or install this cab. to work on TG01 you need this Reg change
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\AR6K_SD1"

mirolg said:
on my TG01 work fine! i have in all my cooked ROM´s this suite
AL_CommManager_Suite_with_WifiSharing_1_1.cab
you can test my ROM or install this cab. to work on TG01 you need this Reg change
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\AR6K_SD1"
Click to expand...
Click to collapse
Miro im using your ROM release but for the life of me cant get the wifi sharing to work, well it works and it doesnt. I can see the connection on my laptop and i've managed to connect only the internet doesnt work and it says 'identifying ... no internet access' ? This is under Windows 7 Ultimate 64 bit. Any ideas ?

i´m now in this moment take wifi router from my TG01 to connect the internet with my Win7 32bit Laptop. i think the problem is not TG01- the Problem is you network/firewall settings

best internet sharing you have in marketplace for free, work veary good. sorry for my bad eanglish

I've only just got the htc wifi sharing app to work properly, but if you ask me its not so great. The reason why i struggled so much to get it to work in the past is that you have to keep resetting your data conection until suddenly it works ? Even then i find it goes off every 10 mins so your constantly turning your data connection on and off which isnt very convenient. I suppose its nice to be able to set up wifi as a hotspot but for me i just cant use it ...
Instead i've started using the usb method with the windows internet sharing app, this never resets and is a proper solid and stable connection. I've even bridged it to the ps3 and managed to play online games with it. The only issue of course is the NAT type, for any sort of gaming to work you need port forwarding at the very least and since were only getting nat type 3 theres quite a few issues.
I have found a nice app called ICS Control which claims to be able to manage ports, etc but i havent quite figured out how it works. http://forum.xda-developers.com/showthread.php?t=377047 Any ideas ?

Yeh i face this problem now
it worked perfect on miROM7.
but on miROM14, it no longer works
The comm manager is corrupeted, i cannot toggle my neworks, so i had insalled another version of comm manager. my WiFi router no longer works :/

olyloh6696 said:
Yeh i face this problem now
it worked perfect on miROM7.
but on miROM14, it no longer works
The comm manager is corrupeted, i cannot toggle my neworks, so i had insalled another version of comm manager. my WiFi router no longer works :/
Click to expand...
Click to collapse
hi oly! check this [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\AR6K_SD1"

mirolg said:
hi oly! check this [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\AR6K_SD1"
Click to expand...
Click to collapse
i already used that reg tweak on the comm manager from your ROM thanks anyway. the phone switch, bluetooth, or WiFi switch do nothing.g when i press them. so idecided to install another comm mnager (htc) it works but i cannot use the WiFi router function :/
Thanks anyway!

Not sure why the wifi comm manager isnt working for you but id recommend trying miro's rom, the one which allows you to switch between sense, spb, and windows default. This is the only rom i've managed to get wifi sharing working on so id really recommend you try miro's rom .
On another subject, i was wondering if anyone knows of a way to share my tg01's internet connection to the pc but give it a static ip address. The problem with sharing without a static ip is certain sites recognise your ip has changed and log you out. Lets say i've wrote a huge message on and my ip changes, i click submit and that message is lost for good ! Its getting quite annoying since this constantly happens on ebay and pretty much any site that requires a log in, i've had to start copying and pasting my text just in case.