hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
do you have a
settings->buttons->lock ?
no. have you? i've got only Program buttons, Up/Down Control and backlight tabs there
hmm...you mean setting up a lock to turn off all keys until you hit Unlock then confirm by tapping the key on the screen?
Press and hold the "End" button and that locks the device.
It is configured under start>setting>Long key press.
MIGHT NOT be the thing you are meaning though.
no, you know when you pres power button phone goes sleep mode? there should be a setting where you can decide if you want to allow other hardware buttons wake phone from sleep or other wise.
currently which ever hw button i press phone wakes up i.e send (green) button, terminate call (red button) or action (round) button.
this is no good when phone in your pocket. a small touch to any of them wakes phone up. i thought it is standart wm option as i had it since wizard
Hmm, when i power off the only thing which will power back on is pressing the power button, opening the keyboard or removing the stylus?
I've just got a touch pro and when I power off, no other buttons will wake up the phone.
That being said, I still have my Tytn II and the Key Lock application is found under Start...Settings...System...Key Lock. The Long Key Press app is not what you're after.
It seems strange that your Touch Pro wakes up on any button push. Maybe you need to change a registry setting instead?
wierd ; on mine apart from those, any button powers it up. only config tool i used is advanced confing and there isint any setting regarding this on that tool
inspectorgadjet said:
Maybe you need to change a registry setting instead?
Click to expand...
Click to collapse
do you know which key i should change?
On touch Pro there is no Keylock option in the settings.
Only way how to activate the device is to:
1. press power button
2. open the keyboard
3. take out the stylus
There is no config like on the HTC Touch/Diamond.
I've contacted Julien Schapman, vendor of advanced config and asked him to add this settings to his application.
this is his answer:
Ok I will look at it when I could get a Touch Pro.
Best regards,
Julien Schapman.
So I hope his new version will have this settings. This is really missing.
But maybe someone is able to export this registry path on the HTC Diamond:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
there should me something like
"KeyLock"=dword:1
Or maybe another. I don't know.
http://forum.xda-developers.com/showthread.php?t=422871
very cool app to unlock and lock the phone.
Tested and works on touch pro.
I'll be replacing S2U2 with this!
nolovelust said:
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
Click to expand...
Click to collapse
It should be in the \Windows directory:
\Windows\Keylock.lnk
\Windows\Keylock.exe
Create a shortcut in \Windows\Start Menu\Settings
I don't have this in my HD2 - any ideas if it can be installed seperately?
No idea as I have an at&t Fuze and this is a RAPH/TP/Fuze forum You might have better luck if you posted a link to this thread in the HD2 forum? Also, an alternative to s2u2, check THIS thread (QuickShutdown)
n-Joie! (Enjoy)
KeyLock
eugene7 said:
I don't have this in my HD2 - any ideas if it can be installed seperately?
Click to expand...
Click to collapse
I haven't KeyLock in my ROM by default too, but I found it on another forum after many hours searching in the Internet
Unpack it and put enywhere (in example: "Windows" or "Program Files" and run).
Greetings.
Hi,
I have a Glofiish, but I would really like to have a Task Manager close button in the upper right corner in today screen (like in Touch Diamond). This button displays the list of opened apps with a [X] button in front of each that allows to really close them.
Do you know some soft like this ?
Or is it possible to extract it from a Touch Diamond ?
Would it be compatible ?
Thanks.
Hi,
I have a question about the default WM lock - is it possible to lock the device but keep the application that is running shown on the screen?
I use long press of the End key to lock the TP but it jumps back to Home screen after locking.
I know Gyrator has a feature that doesn't but I'm wondering if there is a simplier way to do this. Any registry tweaks can manage it?
Thanks for the reply.
PS: (this might seem stupid) Which button is the PTT button? I can see it in the Button settings menu but I can't figure out what to push to make the particular appl to run. Thx
ferus said:
Hi,
I have a question about the default WM lock - is it possible to lock the device but keep the application that is running shown on the screen?
I use long press of the End key to lock the TP but it jumps back to Home screen after locking.
I know Gyrator has a feature that doesn't but I'm wondering if there is a simplier way to do this. Any registry tweaks can manage it?
Thanks for the reply.
PS: (this might seem stupid) Which button is the PTT button? I can see it in the Button settings menu but I can't figure out what to push to make the particular appl to run. Thx
Click to expand...
Click to collapse
So you want to be able to see the program running while your device is locked? I wouldn't know how to this because i just use the power button to put my device on standby.
BONUS!
If you look on the left side of your device, assuming you have an At&t HTC Fuze, the button under the volume up & down buttons and is marked "PTT" is the ptt button
fone_fanatic said:
So you want to be able to see the program running while your device is locked? I wouldn't know how to this because i just use the power button to put my device on standby.
BONUS!
If you look on the left side of your device, assuming you have an At&t HTC Fuze, the button under the volume up & down buttons and is marked "PTT" is the ptt button
Click to expand...
Click to collapse
Yep, exactly - I need my device locked but see the app running. But it's not the same as standby, I use my power button for that as well.
Bonus - this was indeed a stupid question I'm too embarassed to say that I own a non-branded TouchPro. That's why I couldn't find the button. Ah well, thanks for the reply.
I use AE Button Plus, and map a quick double press of the "red/hangup" button to lock screen.
I'm using the stock T-Mobile UK version of the Touch Pro (MDA Vario IV), still with TouchFlo3D enabled and this works with almost all applications, leaving the application running and on screen (but dimmed).
Hope that helps!
hi guys
Diamond 2 has 3 softkeys in the TF3D ; 2 on home screen and 1 on start menu
The two first softeys are quit easy to managed with different apps or direct in the registry. The third is dedicated to the lock screen (phone) function and no one of those apps I tried (ie HD tweak or SK Tools ...) do not managed this softkey. I would like to reassign it to S2U2 instead using the WM6.5 original lock function.
Does anyone has a idea how to solve this ?
Thks
155 visits and no draft of answer ... I feel suddenly a bit clever
Up
That's not possible ... no one has the solution ?
Well ... D2 has more than just 3 softkeys
sigh sigh
Do you mean you want to re-assign the call send button's longpress?
thereisntone said:
hi guys
Diamond 2 has 3 softkeys in the TF3D ; 2 on home screen and 1 on start menu
The two first softeys are quit easy to managed with different apps or direct in the registry. The third is dedicated to the lock screen (phone) function and no one of those apps I tried (ie HD tweak or SK Tools ...) do not managed this softkey. I would like to reassign it to S2U2 instead using the WM6.5 original lock function.
Does anyone has a idea how to solve this ?
Thks
Click to expand...
Click to collapse
Still no solution ..?
I hate that Lock softkey on my HD2 and could replace it with anything, preferably S2U2
Hi gang,
I'm kinda new to the whole rom cooking scene. I've been playing but I can't figure out how to actually place a link to or a shortcut to the SYSTEM - SETTINGS - POWER applet on my HD2, which opens the battery & backlight settings screen.
This is where you can go in and change with the slider the actual screen backlight brightness? I want to put a shortcut to that on my front screen, or at least in the first screen when I hit the Windows button.
Any advice will be greatfully received!
Thanks guys,
MrAskani (aka right now as N00bChef to friends with this phone!!)
the way i'd do it is to install MyLight then under settings buttons assign the program to a key.
http://forum.xda-developers.com/showthread.php?t=485141