This Patch is compatible on the Blueangel and Himalaya
This will fix the tiny issue when receiving SMS while the Device is in the suspends or off MODE.
Problem occurs when the device is turned off and a sms arrives.
Following are the two cases than can occur when the Device is in the suspends MODE when the TEXT Message had arrive.
On most occasion, the device will vibrate but it will not turn the device on and it leaves them unaware of the new SMS especially for other who disable the vibrate for New Text Notification.
On worst cases, the SMS is not receive until the device is turned on.
This little program attempts to fix this two possible issue by turning the DEVICE ON when it receives a SMS.
And for the Second case, it happened when the tmail.exe(Inbox/Messaging) is close by other program that closes an Application when the "x" or "ok" button is tapped like SPB Pocket Plus, Magic Button, Vbar, Wisbar etc..
If you are using SPB Pocket Plus or Wisbar it is always recommended to include \Windows\tmail.exe in your Close Exception.
PS.. This is just an attempt and probably not the best solution. Use this tool on your own risk.
Written by Toenaild
Orginal link Here!
i've downloaded the files... now how do i use them?
thanks!
It just work by it self, after you install it )
it's working. great fix.
Sorry to ask the same question again, i've downloaded the files (4 files)
but my computer doesn't seem to recognize the files and can't be open or install.
Pls help!
TQ!!!
ramram said:
It just work by it self, after you install it )
Click to expand...
Click to collapse
I've successfully installed it, but the problem continues.
Same here..installed the cab...problem still there
I have been having problems with my XDA II for some time, although it used to be relatively trouble-free and give or take a few idiosynchracies has worked properly since unlocking. I don't know if these problems are related or not so I will put them all in one message:
These are the problems:
1) Putting my Spanish SIM card in activates a hard reset 9 times out of 10 (it was fine putting the same card into my son's XDA). Once it did it putting my English SIM back in, but this is usually Ok.
2) Inbox stopped opening -when I click on 'unread messages' it just flickers. It won't open from 'Programs' or from 'New Message' either, nor by opting to send a message from a particular contact.
3) After a hard reset (involuntary) Inbox would open again until I restored my settings, whereupon it wouldn't, so it looks as though it is a dodgy setting.
4) After restoring contacts & appointments only (not settings) Inbox will open but it won't send texts. It sends the text to an ActiveSync folder instead (can't remember which one).
5) Since the above, there is now a new Folder appeared in SMS, entitled 'IPM.Root'. Weird.
6) Whenever I do a soft reset the volume box comes up and it makes a wild beep! beep! beep! beep! beep! beep! until I turn it off and on again.
7) The volume goes off by itself without me touching it: I virtually never hear my phone as volume has gone off again
8)Then there are the synchronisation problems. It often tells me it doesn't recognise my device and I have to set up a new partnership. This is laborious as I have two computers and then have to do it on the other as well...
Somehow I feel that I need a reset that's harder than hard - or do I need a new device?
Will someone help and advise me please!
I have a SPV E650 Orange phone which is unlocked and I have a Vodaphone SIM card in it.
I have a number of very annoying problems with it, I am wondering if it is Orange's fault or just that the HTC S710 has lots of bugs in general.
1. When I attempt to send an sms a lot of the time pressing the button currently assigned to 'send' does nothing at all so I cannot send the message.
2. Frequently when I slide out the keyboard I am unable to use the shift/capslock or function keys. Pressing them does nothing.
3. The phone no longer allows me to go into the section of settings called 'sounds' at all. This means I am unable to change my ringtone, sms tone etc.
4. My phone will no longer sync with ActiveSync. When I try it says it cannot complete the action. Initially I had no problems at all using ActiveSync and I have made no changes.
5. Bluetooth connectivity doesn't seem to work properly. Whenever I want to use my bluetooth headphones I have to delete them off my bluetooth partner list and re-establish a connection rather than just quickly selecting them from the list.
There are many other smaller issues that I can't quite remember right now. What should I do? Should I wipe the whole ROM and install another more stable ROM from this site? Its really annoying me at the moment and I'm considering selling it and getting a Touch or iPhone instead. Please help.
Hi to everyone,
probably this has already been investigated and/or solved (or not), I don't know, but I was not able to find anything related and I believe it is quite strange...
I was used (using WM6.0) to search contacts using keywords being present in the record in the following way:
- Open contact application (the application opens with the first line ready for input);
- place some text in the first line, such as "Richard"
- being presented from the application a list with ONLY contacts containing the word "Richard", either in the name, company name, address, notes, etc.
Well, I find this being impossible with my brand new VODAFONE TOUCH PRO (Raphael) I recently got:
- I open contact application (nothing strange till here...)
- I type just one letter (i.e. "R")
- the PDA immediately switches to PHONE MODE, placing a call to my first contact (I think so, havent been able to double check yet) whose name starts with "R" letter...
- I obviously have to immediately abort as I don't want to place an unwanted call...
This way the only chance I have to search my contacts is to PARSE them by hand, but having more than 2000 it's a really waste of time, beside the fact I can select the first letter the name starts with (and so no chances to find the keyword appearing in other fields...).
Is anyone else reporting the same problems ???
Is there some kind of setup setting I'm forgetting of ???
Really considering not to trash my BB...
Ciao
I wonder myself being the only one reporting such a problem and/or not being receiving any answer...
So I try raising my message up to your attention...
I've got the same problem. Its actually a little weirder than you wrote. Most letters work fine.
Pressing 'r', however, automatically dials whatever name you are on. Pressing 'w' inserts 'w*', which breaks the search (you can delete the * and then continue).
There may be other letter problems too. This is on a Sprint Touch Pro.
Anyone else?
BTW, the hard keyboard works fine.
I wonder if this problem exists also in other applications such as SMS??
i sometimes face a problem while writting an SMS, i press a character but suddenly i find the dialer activated...!!!
does this has anything to do with special characters?
"R" and "W*" on Sprint Touch Pro Contacts Search
I wish I had a solution, but can only chime in that I have had two Sprint Touch pro's and both have the same problem. If you call sprint, they haven't heard anything about it (supposedly) but it seems to be a problem with all sprint touch pros.
I have the same problem with my Sprint HTC Touch Pro. Don't know how to fix it. Can anyone help?
Hello,
I have an HTC Touch Cruise with windows mobile 6.1. I use it on my motorcycle with TOMTOM NAVIGATOR, and earphones. I config TOMTOM, push the today screen and lock my phone. It works perfect for 10 min.
After the 10 min, windows mobile displays a message:
"TOMTOM NAVIGATOR is still running an using the battery would you like to close NAVIGATOR", you must aswer the question with YES or NO.
If you do not answer the question, windows mobile close the NAVIGATION software. > very irritating....
Is there an solution to disable this battery saving function, so the NAVIGATION software must never stop automatically...
Thanks
it only asks if tomtom is running in background
I reckon your screen lock is behaving as foreground app. first try to run tomtom without keylocker, if the issue is gone, search for different keylocker.
otherwise, there is no trigger, nor registry for this.
Not working
Hello,
I have tried to not locking my phone, but only running tomtom with windows mobile today screen.
Then also i recieve the question.. Are there other solutions, or this problem ?
something is running in front of it. Something on your pda is behaving as front app. You need to find out what is it and stop it from running.
use a proper task manager like fdc. post out list of processes here. We will tell you what else it could be. Which procs are required and which you can safely kill.
There is no tweak to stop the pop up question. You can run a script which would wait for it and always answer yes, but that's not proper solution
reply
Hello,
If you have an script what always saying NO, it is perfect.
Here are the proccesse that are running:
NK.EXE
filesys.exe
tmail.exe
device.exe
SAPSettings.exe
gwes.exe
shell32.exe
services.exe
connmgr.exe
cprog.exe
QuickDail.exe
APLauncher.exe
MediaHubMini.exe
Biotouch.exe
GNAngent.exe
sddaemon.exe
repllog.exe
TaskManager.exe
TomTom Navigator.exe
Do you know what procces is causes the note? maby i can kill it..?
These you can kill safely:
in order what I suppose could cause your trouble.
GNAngent.exe - google nav
APLauncher.exe
MediaHubMini.exe
QuickDail.exe
SAPSettings.exe
Biotouch.exe
these below are just standard winmo apps, shouldn't be doing problems, but you can close them for a try:
connmgr.exe - comm manager
tmail.exe - mails
repllog.exe - activesync
sddaemon.exe - speed dial
cprog.exe - phone functions
can't kill:
services.exe
device.exe
shell32.exe
gwes.exe
filesys.exe
NK.EXE
===
use the same proram for closing app, upper toolbar on bottom, 3rd icon from left. close all except those I wrote you can't and give it a try.
it should help, then you need to find out which of them is trouble maker and remove start command of it.
If this won't work, I can send you that script.
Not working
Hello,
I have killed all the proccess:
GNAngent.exe - google nav
APLauncher.exe
MediaHubMini.exe
QuickDail.exe
SAPSettings.exe
Biotouch.exe
connmgr.exe - comm manager
tmail.exe - mails
repllog.exe - activesync
sddaemon.exe - speed dial
cprog.exe - phone functions
But no results, i recieve again the note... to close tomtom. Please can you send me the script. So i can try it.....
Script
Hello, Iam running TOMTOM v7.915 with Windows Mobile 6.1 Pro.
Look also in the attachment, for the picture..
tomtom82 said:
Hello, Iam running TOMTOM v7.915 with Windows Mobile 6.1 Pro.
Look also in the attachment, for the picture..
Click to expand...
Click to collapse
try the new version first,
for this script you need to install mortscript (cab\mortscript-ppc.cab). then copy file RunTT.mscr from runTT.zip to windows folder and .lnk file to windows\start menu\programs
I have no idea if it will work though. there is commented out another option for pressing the key, try to switch them if it will not work like it is.
Hey guys.
Was a solution found to this? I too use TTNavigator7 on my motorbike and have the same problem with WM6.5 closing TTN after 10 minutes. WM6 asks if I would like to close Navigator and if I don't answer, Navigator is closed and then the phone goes into sleep mode after the normal sleep timeout.
Of course, I could power up the phone when on my bike using a USB cable, but that would negate the benefits of the Bluetooth receiver that I've just attached to my intercom system on my Harley.
The HD2 was an upgrade from a TYTN II running TTN6. The timeout problem did not occur with that combination!
I've tried to stop the problem using Keepawake and Deltalock but neither works (I used Deltalock successfully on my previous phone).
I so hope that there's a decent solution to this problem.
Neil
papo said:
try the new version first,
for this script you need to install mortscript (cab\mortscript-ppc.cab). then copy file RunTT.mscr from runTT.zip to windows folder and .lnk file to windows\start menu\programs
I have no idea if it will work though. there is commented out another option for pressing the key, try to switch them if it will not work like it is.
Click to expand...
Click to collapse
Hi Papo
I've installed MortScript and tried out your RunTT script. Mortscript seems to not be recognising that Windows has displayed the notification. I suspect that it may be because it's a notification rather than a full window - does this seem likely to you?
I'm sure that this is where the problem lies - I've added lines to the script to display debug messages and the code to respond to the notification is never getting executed.
Is there any way that you can suggest to trap the notification within Mortscript please - I haven't used Mortscript enough to know where to look next.
Thanks
Neil
Hi Guys
I've cracked this problem - I couldn't do it by trapping the notification, so I attacked it a different way. The attached script just counts how long TomTom has been in background and then makes it the active window every nine minutes to stop the timeout.
If external power is used, or if TomTom is brought to foreground, then the counter is reset and the counter is only restarted when the power cable is unplugged or TomTom is sent to background.
The process relies on the KeepAwake program. The script will automatically load KeepAwake if it's not running.
It's my first Mortscript, so it may not be coded the way experienced scriptwriters would write it so if anyone wants to suggest improvements, then I'll be happy to take them on board.
When I'm out and about on my bike, I use a program called deltaLock by Christophe Sommer to lock the screen. I set deltaLock to use the HTC back button to unlock and Lock Mode set to "black screen" (I used this on my Tytn II with TTN6).
Happy to receive any feedback
Neil