Strange behaviour when searching contacts... - Touch Pro, Fuze General

Hi to everyone,
probably this has already been investigated and/or solved (or not), I don't know, but I was not able to find anything related and I believe it is quite strange...
I was used (using WM6.0) to search contacts using keywords being present in the record in the following way:
- Open contact application (the application opens with the first line ready for input);
- place some text in the first line, such as "Richard"
- being presented from the application a list with ONLY contacts containing the word "Richard", either in the name, company name, address, notes, etc.
Well, I find this being impossible with my brand new VODAFONE TOUCH PRO (Raphael) I recently got:
- I open contact application (nothing strange till here...)
- I type just one letter (i.e. "R")
- the PDA immediately switches to PHONE MODE, placing a call to my first contact (I think so, havent been able to double check yet) whose name starts with "R" letter...
- I obviously have to immediately abort as I don't want to place an unwanted call...
This way the only chance I have to search my contacts is to PARSE them by hand, but having more than 2000 it's a really waste of time, beside the fact I can select the first letter the name starts with (and so no chances to find the keyword appearing in other fields...).
Is anyone else reporting the same problems ???
Is there some kind of setup setting I'm forgetting of ???
Really considering not to trash my BB...
Ciao

I wonder myself being the only one reporting such a problem and/or not being receiving any answer...
So I try raising my message up to your attention...

I've got the same problem. Its actually a little weirder than you wrote. Most letters work fine.
Pressing 'r', however, automatically dials whatever name you are on. Pressing 'w' inserts 'w*', which breaks the search (you can delete the * and then continue).
There may be other letter problems too. This is on a Sprint Touch Pro.
Anyone else?

BTW, the hard keyboard works fine.

I wonder if this problem exists also in other applications such as SMS??
i sometimes face a problem while writting an SMS, i press a character but suddenly i find the dialer activated...!!!
does this has anything to do with special characters?

"R" and "W*" on Sprint Touch Pro Contacts Search
I wish I had a solution, but can only chime in that I have had two Sprint Touch pro's and both have the same problem. If you call sprint, they haven't heard anything about it (supposedly) but it seems to be a problem with all sprint touch pros.

I have the same problem with my Sprint HTC Touch Pro. Don't know how to fix it. Can anyone help?

Related

Browsing PDA via PC - where's my info stored?

Hi folks,
As I have locked out my SPV-M2000 and can't figure out the keys for the keyboard (see here), I need to try and track down some of the SMS/MMS messages stored on the device.
I can still browse via my PC, but I don't know where they will be stored or if I can retrieve them.
Any ideas?
Well, changes are, if you were to copy everything off your phone, and copy them all over back to them, chances are the stuff will remain.
However, I think it ought to be best if you can solve your keyboard problem.
For your keyboard, I'm not sure how a BA works, but default a Wizard keyboard starts without Cap, and a CAP will be on until you off it. And Shift and Fn will only function while you are holding it (kinda like the Shift key on your PC keyboard). I'm not sure, probably you've got your number wrong? As I guess, you will need to use the Fn key for typing a number (not sure how your keyboard goes).
ANYWAY, I guess you aren't getting much of a respond because you've not got your info out as much as you should. First of all, it may be not as "generally" as you think. And, not all people know what a M2000 is and they don't borther to look for it. Although I hate people with multiple posts, I guess it would be good if you could repost this on the BlueAngel forum and try your luck there, eps the keyboard issue seems very easy to solve.

Problems with E650 Orange

I have a SPV E650 Orange phone which is unlocked and I have a Vodaphone SIM card in it.
I have a number of very annoying problems with it, I am wondering if it is Orange's fault or just that the HTC S710 has lots of bugs in general.
1. When I attempt to send an sms a lot of the time pressing the button currently assigned to 'send' does nothing at all so I cannot send the message.
2. Frequently when I slide out the keyboard I am unable to use the shift/capslock or function keys. Pressing them does nothing.
3. The phone no longer allows me to go into the section of settings called 'sounds' at all. This means I am unable to change my ringtone, sms tone etc.
4. My phone will no longer sync with ActiveSync. When I try it says it cannot complete the action. Initially I had no problems at all using ActiveSync and I have made no changes.
5. Bluetooth connectivity doesn't seem to work properly. Whenever I want to use my bluetooth headphones I have to delete them off my bluetooth partner list and re-establish a connection rather than just quickly selecting them from the list.
There are many other smaller issues that I can't quite remember right now. What should I do? Should I wipe the whole ROM and install another more stable ROM from this site? Its really annoying me at the moment and I'm considering selling it and getting a Touch or iPhone instead. Please help.

Motorola Q9h Speed Dial help...

Hey everyone,
I am not sure where else to turn at this point but xda... I had an AT&T Tilt that I had modded quite well to my liking, but then I lost it. So I had to revert back to my old Motorola Q9h. There are a few quirks about reverting back to a smartphone from a PPC that are bugging me. Like how I can't find anything like bitpim to back up all my text messages so I can upgrade to 6.1. I have a lot of text messages, some that I need to retain in case some legal dispute happens in the future with my ex. Anyway, that's minor, I can live with 6.0 for now. Threaded messaging would be the only real benefit for me and it's not a must have in this case.
Anyway, on to the reason I am posting. I don't know what happened with my speed dial function but for some reason, my 1 key does not link to my voicemail anymore. I don't have the default voicemail contact that comes with the phone and I don't have a clue what happened to it. I tried creating a new contact with the voicemail number and assigning it to the appropriate speed dial button, but it says 1 and 0 are "Reserved". I have searched numerous forums for some help with this to no avail.
So I decided to try and see if I could figure it out myself (sounds ominous, I know, I know, but I haven't changed anything yet, don't worry ). I sat at work today, bored out of my mind, and decided to just look through the phone to at least pinpoint the location of the speed dial contents in the registry. The only thing I have found that sounds promising is located at:
HKCU\ControlPanel\Dial\Locations\
BUT... I don't read or write in this language. I could also be in the completely wrong location. Any guidance from this point onwards would be greatly appreciated. If you need any more details, please ask.
--Steven

Name of incoming call notification window?

Hello together, I am new here (well, at least as poster)
I've got a used XDA Diamond Pro (aka Touch Pro, german O2 branding) and try to "move in" form my old Prophet.
The new thingy can soooo much more, but the actual reason to change was the shiny look and the hardware keyboard - from both I am a bit disappointed in the last four weeks I try to get used to the new device...
But my actual problem is this:
On the Prophet I use ozBT 0.76 to automatically switch on Bluetooth when a call comes in and I drive in the car and the hands-free setup should take over. Works great there.
Now I want to move this over to the Touch Pro. ozBT 0.76 runs. Fine. It starts the BT when I start the telephone app to start an outgoing call. Fine. But the other way (which is the more important one) does not work: Incoming call does not start the BT. When checking this, I found, that the WM 6.1 does not start the full telephone app (german window title "Telefon"), but only a notification dialog with a accept and a deny button.
Now - how do I tell ozBT (or any other program which needs a program name or window title to ask the task manager process whether something is running or not) what to watch out for? i.e. what is the name of the process behind that notification dialog?
Hi again,
the problem is solved - and a little bit more tricky, than I had expected:
(1) The phone app is cprog.exe and it runs as long as the phone is booked into a network - so that is not the right solution...
(2) The first line in the notification window is "Eing.Anr." (german for inc. call) - et voila ozBT switches the BT on for "#bEing.;" in the "title begins with" section. So I can continue to get used to the touch pro now...
(3) General startegy next time someone needs a prog. name for ozBT:
most likely, the window title starts with a letter. So try in "starting with..." with "A", "B", etc. until you have the first letter, then continue with the second letter, most of the time that is anyway enough...
TS

Help, please.

*7:44pm
Hello everyone. I own an Alcatel Idol 4 6055U. I am not able to find my device as an option to see the forums. I see Idol3, Idol 4s, but not Idol 4. I mean, I see the questions pertaining to the model, but I myself cannot access them. Here's my dilemma. Every Android I've owned over the last 2 years has had issues. The same basic issues, but slightly different for each phone. Yesterday I contacted Alcatel customer support yet again concerning issues with my phone. Issues such as phone calls coming in that don't show up on my call logs. I've answered the calls. No one responds on the other end. My back button continuously skips over letters, causing unnecessary time correcting a word at times. When sms texting, the message I'm typing stops and I have to go back into my message to continue. The curser isn't even in the right spot. It will be in the middle of the message instead of at the end. At times the person's message with whom I'm texting will show up out of the dialog box in different print, in addition to receiving the message as usual. The time is always changing. I don't know much about operating systems. I downloaded a file manager from Google Play and found lots of files marked "SQlite injection", hijacked, UDP connection, and more. I even found wording explaining how "they" will only see something about shared user files bc "they're" not on some list (I can provide a copy). I have reset my phone number numerous times. Same issues.
All this being said, I have good reason to believe I know the hacker who is responsible. This individual lives states away. It would all have to be done remotely.
I don't know what to do. I'm begging someone for help. Thank you for your time.
specs8 said:
*7:44pm
Hello everyone. I own an Alcatel Idol 4 6055U. I am not able to find my device as an option to see the forums. I see Idol3, Idol 4s, but not Idol 4. I mean, I see the questions pertaining to the model, but I myself cannot access them. Here's my dilemma. Every Android I've owned over the last 2 years has had issues. The same basic issues, but slightly different for each phone. Yesterday I contacted Alcatel customer support yet again concerning issues with my phone. Issues such as phone calls coming in that don't show up on my call logs. I've answered the calls. No one responds on the other end. My back button continuously skips over letters, causing unnecessary time correcting a word at times. When sms texting, the message I'm typing stops and I have to go back into my message to continue. The curser isn't even in the right spot. It will be in the middle of the message instead of at the end. At times the person's message with whom I'm texting will show up out of the dialog box in different print, in addition to receiving the message as usual. The time is always changing. I don't know much about operating systems. I downloaded a file manager from Google Play and found lots of files marked "SQlite injection", hijacked, UDP connection, and more. I even found wording explaining how "they" will only see something about shared user files bc "they're" not on some list (I can provide a copy). I have reset my phone number numerous times. Same issues.
All this being said, I have good reason to believe I know the hacker who is responsible. This individual lives states away. It would all have to be done remotely.
I don't know what to do. I'm begging someone for help. Thank you for your time.
Click to expand...
Click to collapse
see my PM

Categories

Resources