Hopefully these will be useful if someone messed up theirs. Eventually after I update/root I will post any changes.
stock unrooted evo 4g
hardware 0003
baseband = 1.39.00.05.31
software = 1.32.651.6
pri = 1.40_003
prl = 60668
Code:
##data# > wimax settings
standby time (minute) = 10
scan rate (minute) = 30
NAI = [email protected]
username = [email protected]
realm = sprintpcs.com
spi mn-aaa = 4D2
spi mn HA = 4D2
home ip address = 0.0.0.0
second home agent = 68.28.89.76
center frequency = 2647000,2657000,2667000
bandwidth = 10, 10, 10
napdis = 000002
nspdis = 000004
wimax scan attempt timeout(s) = 1
wimax scan retry(s) = 900
wimax idle sleep(s) = 10
wimax entry rx (rssi) (dbm) = -89
wimax entry cinr (db) = 4
wimax entry delay(s) = 600
wimax exit cinr (db) = 2
wimax exit delay(s) = 2
handoff threshold = 0
idle mode timer = 0
tls = enable
ttls = disable
obviously replace the 4g mac and username with your own.
--------------------------------------------
edit: after OTA update, some missing and modified settings
stock unrooted evo 4g
hardware 0003
baseband = 2.05.00.06.10
software = 1.47.651.6
pri = 1.40_003
prl = 60668
Code:
##data# > wimax settings
standby time (minute) = 10
scan rate (minute) = 30
NAI = [email protected]
username = [email protected]
realm = sprintpcs.com
[STRIKE]spi mn-aaa = 4D2
spi mn HA = 4D2
home ip address = 0.0.0.0
second home agent = 68.28.89.76[/STRIKE]
center frequency = 2647000,2657000,2667000
bandwidth = 10, 10, 10
napdis = 000002
nspdis = 000004
wimax scan attempt timeout(s) = 1
[COLOR="SeaGreen"]wimax scan retry(s) = 300[/COLOR]
wimax idle sleep(s) = 10
wimax entry rx (rssi) (dbm) = -89
wimax entry cinr (db) = 4
[COLOR="SeaGreen"]wimax entry delay(s) = 300[/COLOR]
wimax exit cinr (db) = 2
wimax exit delay(s) = 2
handoff threshold = 0
idle mode timer = 0
tls = enable
ttls = disable
edit 2: added additional settings per request
------------------------------------
Code:
data profile
active profile = 1
username = [email protected]
spi mn-ha = 4d2
spi mn-aaa = 4d2
reverse tunnel preferred = enable
home ip address = 0.0.0.0
primary home agent = 255.255.255.255
second home agent = 68.28.89.76
dsa server url = https://dsa.spcsdns.net:443/dsa/
Code:
evdo
ddtm = disable
preferred mode = automatic
Code:
advanced
meid(hex) = your meid
p_rev = IS-2000 (6)
scm = 58
slot mode = enable
slot cycle index = 2
mcc (mobile country code) = 310
mnc (mobile network code) = 00
msid = (not sure if this is private so not posting)
accolc (access overload class) = 2
vocoder = enable
evrc-b = disable
home orig = evrc
roam orig = voice 13k
home sys registration = enable
foreign sid registration = enable
foreign nid registration = enable
mn ha spi set = enable
mn aaa spi set = enable
home side/nid #1 = 4139/65535
mms server url = http://mms.sprintpcs.com
rtsp proxy port = 554
rtsp proxy address = rtsp.vog.sprintpcs.com
http pd proxy port = 8085
http pd proxy address = pd.vog.sprintpcs.com
======================================
after froyo ota update
android version = 2.2
baseband = 2.15.00.07.28
kernel = 2.6.32.15-g746f4f0 [email protected] #58
build = 3.26.651.6 cl218634 release-keys
software = 3.26.651.6
browser = webkit3.1
pri = 1.40_003
prl = 60668
Code:
##data#
standby time (minutes) = 10
scan rate (minutes) = 30
NAI = [email protected]
user name = [email protected]
realm = sprintpcs.com
center frequency = 2647000,2657000,2667000
bandwidth = 10,10,10
napdis = 000002
nspdis = 000004
wimax_scan_attempt_timeout(s) = 1
[COLOR="Lime"]wimax_scan_retrys = 120[/COLOR]
wimax_idle_sleep(s) = 10
wimax_entry_rx(rssi)dbm = -89
wimax_entry_cinr(db) = 4
wimax_entry_delay(s) = 300
wimax_exit_cinr (db) = 2
wimax_exit_delay(s) = 2
handoff threshold = 0
idle mode timer = 0
tls = enable
ttls = disable
Awesome thanks!
Swyped from my EVO via XDA app
When you root your PRI will roll back to 1.34
There is quite a few obvious entries that are missing on a rooted evo with 4g working.
Hmm
Interesting
James
added wimax data settings after applying OTA update
Thanks for this, it was a big help!
I had screwed with some settings and ended up not remembering what they were
Can some post the screen shots/info for the other settings under data plz, looking for default unmodified ones.
I thought these were the default unmodified settings?
~Jasecloud4
jasecloud4 said:
I thought these were the default unmodified settings?
~Jasecloud4
Click to expand...
Click to collapse
they prob are but i need the ones for evdo
stress1ner said:
Can some post the screen shots/info for the other settings under data plz, looking for default unmodified ones.
Click to expand...
Click to collapse
added info to first post
TeknoJnky said:
added info to first post
Click to expand...
Click to collapse
Good move not posting your MSID, it's private
my 4g isnt working after the simple root process. how might i go about figuring out why?
jbcain said:
my 4g isnt working after the simple root process. how might i go about figuring out why?
Click to expand...
Click to collapse
I would recommend flashing whitslacks rooted oem to make sure all the radios and such are up to date.
http://forum.xda-developers.com/showthread.php?t=715915
Once its all working from there, then you can try out other roms if you desire.
TeknoJnky said:
added info to first post
Click to expand...
Click to collapse
good looking out.
TeknoJnky said:
Code:
##data# > wimax settings
standby time (minute) = 10
scan rate (minute) = 30
NAI = [email protected]
username = [email protected]
realm = sprintpcs.com
[STRIKE]spi mn-aaa = 4D2
spi mn HA = 4D2
home ip address = 0.0.0.0
second home agent = 68.28.89.76[/STRIKE]
center frequency = 2647000,2657000,2667000
bandwidth = 10, 10, 10
napdis = 000002
nspdis = 000004
wimax scan attempt timeouts = 1
[COLOR="SeaGreen"]wimax scan retrys = 300[/COLOR]
wimax idle sleeps = 10
wimax entry rx (rssi) (dbm) = -89
wimax entry cinr (db) = 4
[COLOR="SeaGreen"]wimax entry delays = 300[/COLOR]
wimax exit cinr (db) = 2
wimax exist delays = 2
handoff threshold = 0
idle mode timer = 0
tls = enable
ttls = disable
Click to expand...
Click to collapse
Just FYI: If you change the WIMAX_scan_attempt_Timeout - the only valid entries are 5-300, so you won't be able to restore the default value of "1"
updated with froyo OTA defaults
only change noticed was
wimax_scan_retrys = 120 (from 300)
...and the update resets all values that were manually changed.
Question: How would the MN HA SPI Set and MN AAA SPI Set values be changed from Enable (stock) to Disable? I was checking speed downloads tonight on my Evo and my wife's and noticed are settings are different, but I didn't change my values manually something else did... All other settings are consistent.
Both phones are rooted and running MikFroyo 4.5.
I tried to google what those settings are even for, but didn't have much luck. Any help would be appreciated.
Question: What are the MN HA SPI Set and MN AAA SPI Set values for?
I was comparing download speeds on my wife's Evo and mine tonight after the latest PRL update and noticed our settings are different.
Her phone shows both values as Enable and mine show Disable. I have no idea how mine got changed.
I tried to google search but didn't find anything helpful. Any help would be appreciated.
Edit: Both of our phones are rooted and currently running MikFroyo 4.5.
Is there a way to disable 4G? My 4G keeps turning itself on and I *DONT* want it on EVER AGAIN.
SOLVED: Chaged 4G MAC to 00:00:00:00:00:00 and now it doesn't connect and after a few attemps it idles. Still haven't checked how much the battery drains... Another solution is to change the RSA key just 1 character will make it not connect. (both the MAC & RSA keys can be edited in wimax.img)
Related
I have a Dolphin 9900 handset which runs WM 6.1. Each day at 12:00PM and 12:00AM the device turns on automatically. There are no e-mail accounts setup on this device. I have tried to disable Direct Push, assuming that's the reason for its issue, but nothing has worked. I have tried the following:
[HKEY_CURRENT_USER\ControlPanel\Notifications\Remin ders\AutoSnooze]
"AutoSnoozeMins"=dword:0
HKCU\ControlPanel\Notifications\{A877D65A239C-47a7-9304-0D347F580408}
set value "Options" to 20000000 (hexadecimal) or 536870912 (decimal)
And the steps found here:
The Exchange Security Policy (4131) updates the device policy:
HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
To change the inactivity timer:
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\
AEFrequencyType: 0 = No inactivity time; 1 = Activity time enable
AEFrequencyValue: = number of minutes before timeout
To change the password strength policy:
HKLM\Comm\Security\Policy\LASSD\LAP\lap_pw\
MinimumPasswordLength: minimum number of characters in password (0 defaults to 1)
PasswordComplexity: 0 = Require Alphanumeric; 1 = Require numeric (PIN); 2 = No restriction
And finally to change the Device wipe settings:
HKLM\Comm\Security\Policy\LASSD\
DeviceWipeThreshold: -1 = disabled; (any positive number) = # failed attempts before device memory gets whacked
CodewordFrequency: # of attempts before a codeword is displayed to prevent accidental device wipe.
None of these steps worked as the device still turns on at 12:00 each time. Does anyone have any suggestions?
I have searched all over, but have yet to find it.
Is there a general build.prop wiki somewhere. which could show a listing of avalibles variables and values. something like:
Code:
ro.sf.lcd_density = n
n = [Integer] Numeric value in DPI corrisponding to screen pixels per inch
ro.telephony.default_network
0 = WCDMA Perfered
1 = GSM Only
2 = WCDMA Only
3 = GSM/WCDMA (auto mode, according to PRL)
4 = CDMA / EVDO. Perfered
ro.setupwizard.mode
OPTIONAL = Allow bypass of first start setup
DISABLED = Do not show setup on first start
etc..
I tired finding a thread to my second question but was unsuccessful again so here it is.
Does anyone know the galaxy S 4G Service Codes??? Thanks!
[email protected] said:
I tired finding a thread to my second question but was unsuccessful again so here it is.
Does anyone know the galaxy S 4G Service Codes??? Thanks!
Click to expand...
Click to collapse
~Samsung Mobile Global Codes~
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#8999*8378# = Test Menu.
*#4777*8665# = GPSR Tool.
*#8999*523# = LCD Brightness.
*#8999*377# = Error Menu.
*#8999*327# = EEP Menu.
*#8999*667# = Debug Mode.
*#92782# = PhoneModel. (Wap)
#*5737425# = JAVA Mode.
*#2255# = Call List.
*#232337# = Bluetooth MAC Adress.
*#5282837# = Java Version.
#*4773# = Incremental Redundancy.
#*7752# = 8 PSK uplink capability bit.
#*7785# = Reset wakeup & RTK timer cariables/variables.
#*7200# = Tone Generator Mute.
#*3888# = BLUETOOTH Test mode.
#*7828# = Task screen.
#*#8377466# = S/W Version & H/W Version.
#*2562# = Restarts Phone.
#*2565# = No Blocking? General Defense.
#*3353# = General Defense, Code Erased.
#*3837# = Phone Hangs on White screen.
#*3849# = Restarts Phone.
#*3851# = Restarts Phone.
#*3876# = Restarts Phone.
#*7222# = Operation Typ: (Class C GSM)
#*7224# = !!! ERROR !!!
#*7252# = Operation Typ: (Class B GPRS)
#*7271# = CMD: (Not Available)
#*7274# = CMD: (Not Available)
#*7337# = Restarts Phone. (Resets Wap Settings)
#*2787# = CRTP ON/OFF.
#*2886# = AutoAnswer ON/OFF.
#*3737# = L1 AFC.
#*5133# = L1 HO Data.
#*7288# = GPRS Detached/Attached.
#*7287# = GPRS Attached.
#*7666# = White Screen.
#*7693# = Sleep Deactivate/Activate.
#*7284# = L1 HO Data.
#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# = Databattery.
#*2527# = GPRS switching set to (Class 4, 8, 9, 10)
#*2679# = Copycat feature Activa/Deactivate.
#*3940# = External looptest 9600 bps.
#*4263# = Handsfree mode Activate/Deactivate.
#*4700# = Please use function 2637.
#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# = Time ON.
#*3370# = Same as 4700.
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep.
#*7462# = SIM Phase.
#*7983# = Voltage/Freq.
#*7986# = Voltage.
#*8466# = Old Time.
#*2255# = Call Failed.
#*5187# = L1C2G trace Activate/Deactivate.
#*5376# = DELETE ALL SMS!!!!.
#*6837# = Official Software Version: (0003000016000702)
#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# = Permanent Registration Beep.
#*2474# = Charging Duration.
#*2834# = Audio Path. (Handsfree)
#*3270# = DCS Support Activate/Deactivate.
#*3282# = Data Activate/Deactivate.
#*3476# = EGSM Activate/Deactivate.
#*3676# = FORMAT FLASH VOLUME!!!
#*4760# = GSM Activate/Deactivate.
#*4864# = White Screen.
#*5171# = L1P1.
#*5172# = L1P2.
#*5173# = L1P3.
#*7326# = Accessory.
#*7683# = Sleep variable.
#*8465# = Time in L1.
#*2252# = Current CAL.
#*2836# = AVDDSS Management Activate/Deactivate.
#*3877# = Dump of SPY trace.
#*7728# = RSAV.
#*2677# = Same as 4700.
#*3728# = Time 2 Decod.
#*3725# = B4 last off.
#*7372# = Resetting the time to DPB variables.
#*7732# = Packet flow context bit Activate/Deactivate.
#*6833# = New uplink establishment Activate/Deactivate.
#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)
#*7722# = RLC bitmap compression Activate/Deactivate.
#*2351# = Blinks 1347E201 in RED.
#*4472# = Hysteresis of serving cell: 3 dB
#*2775# = Switch to 2 inner speaker.
#*9270# = Force WBS.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3757# = DSL UART speed set to. (LOW, HIGH)
#*8726# = Switches USBACM to Normal.
#*8724# = Switches USBACM to Generator mode.
#*8727# = Switches USBACM to Slink mode.
#*8725# = Switches USBACM to Loop-back mode.
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*8370# = Tfs4.0 Test 0.
#*8371# = Tfs4.0 Test 1.
#*8372# = Tfs4.0 Test 2.
#*8373# = Tfs4.0 Test 3.
#*8374# = Tfs4.0 Test 4.
#*8375# = Tfs4.0 Test 5.
#*8376# = Tfs4.0 Test 6.
#*8377# = Tfs4.0 Test 7.
#*8378# = Tfs4.0 Test 8.
#*8379# = Tfs4.0 Test 9.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*22671# = AMR REC START.
#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# = Pause REC.
#*22674# = Resume REC.
#*22675# = AMR Playback.
#*22676# = AMR Stop Play.
#*22677# = Pause Play.
#*22678# = Resume Play.
#*77261# = PCM Rec Req.
#*77262# = Stop PCM Rec.
#*77263# = PCM Playback.
#*77264# = PCM Stop Play.
#*22679# = AMR Get Time.
*#8999*364# = Watchdog ON/OFF.
*#8999*427# = WATCHDOG signal route setup.
*2767*226372# = Camera Reset. (deletes photos)
*2767*3855# = E2P Full Reset.
*2767*2878# = E2P Custom Reset.
*2767*927# = E2P Wap Reset.
*2767*226372# = E2P Camera Reset.
*2767*688# = Reset Mobile TV.
#7263867# = RAM Dump. (On or Off)
~Samsung Mobile Lock Codes~
*#7465625# = Check the locks.
*7465625*638*Code# = Enables Network lock.
#7465625*638*Code# = Disables Network lock.
*7465625*782*Code# = Enables Subset lock.
#7465625*782*Code# = Disables Subset lock.
*7465625*77*Code# = Enables SP lock.
#7465625*77*Code# = Disables SP lock.
*7465625*27*Code# = Enables CP lock.
#7465625*27*Code# = Disables CP lock.
*7465625*746*Code# = Enables SIM lock.
#7465625*746*Code# = Disables SIM lock.
*7465625*228# = Activa lock ON.
#7465625*228# = Activa lock OFF.
*7465625*28638# = Auto Network lock ON.
#7465625*28638# = Auto Network lock OFF.
*7465625*28782# = Auto subset lock ON.
#7465625*28782# = Auto subset lock OFF.
*7465625*2877# = Auto SP lock ON.
#7465625*2877# = Auto SP lock OFF.
*7465625*2827# = Auto CP lock ON.
#7465625*2827# = Auto CP lock OFF.
*7465625*28746# = Auto SIM lock ON.
#7465625*28746# = Auto SIM lock OFF.
~Samsung Mobile MMS Codes~
*2767*43927# = Austria WAP Settings.
*2767*420927# = Czech WAP Settings.
*2767*33927# = France WAP Settings.
*2767*49927# = Germany WAP Settings.
*2767*30927# = Greece WAP Settings.
*2767*39927# = Italy WAP Settings.
*2767*31927# = Netherlands WAP Settings.
*2767*351927# = Portugal WAP Settings.
*2767*7927# = Russia WAP Settings.
*2767*34927# = Spain WAP Settings.
*2767*46927# = Sweden WAP Settings.
*2767*44927# = UK WAP Settings.
*2767*380927# = Ukraine WAP Settings.
*2767*73738927# = WAP Settings Reset.
*2767*43667# = Austria MMS Settings.
*2767*420667# = Czech MMS Settings.
*2767*33667# = France MMS Settings.
*2767*49667# = Germany MMS Settings.
*2767*30667# = Greece MMS Settings.
*2767*39667# = Italy MMS Settings.
*2767*31667# = Netherlands MMS Settings.
*2767*351667# = Portugal MMS Settings.
*2767*7667# = Russia MMS Settings.
*2767*34667# = Spain MMS Settings.
*2767*46667# = Sweden MMS Settings.
*2767*44667# = UK MMS Settings.
*2767*380667# = Ukraine MMS Settings.
~Samsung Mobile Sound Codes~
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
~Samsung Mobile Email Codes~
#*36245# Turns Email TestMenu on.
*2767*22236245# Email EPP set (....)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email...
*2767*3136245# Email...
*2767*3336245# Email...
*2767*3436245# Email...
*2767*3936245# Email...
*2767*4136245# Email...
*2767*4336245# Email...
*2767*4436245# Email...
*2767*4536245# Email...
*2767*4636245# Email...
*2767*4936245# Email...
*2767*6036245# Email...
*2767*6136245# Email...
*2767*6236245# Email...
*2767*6336245# Email...
*2767*6536245# Email...
*2767*6636245# Email...
*2767*8636245# Email...
*2767*85236245# Email...
Don't work...
luckyduck69 said:
~Samsung Mobile Global Codes~
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#8999*8378# = Test Menu.
*#4777*8665# = GPSR Tool.
*#8999*523# = LCD Brightness.
*#8999*377# = Error Menu.
*#8999*327# = EEP Menu.
*#8999*667# = Debug Mode.
*#92782# = PhoneModel. (Wap)
#*5737425# = JAVA Mode.
*#2255# = Call List.
*#232337# = Bluetooth MAC Adress.
*#5282837# = Java Version.
#*4773# = Incremental Redundancy.
#*7752# = 8 PSK uplink capability bit.
#*7785# = Reset wakeup & RTK timer cariables/variables.
#*7200# = Tone Generator Mute.
#*3888# = BLUETOOTH Test mode.
#*7828# = Task screen.
#*#8377466# = S/W Version & H/W Version.
#*2562# = Restarts Phone.
#*2565# = No Blocking? General Defense.
#*3353# = General Defense, Code Erased.
#*3837# = Phone Hangs on White screen.
#*3849# = Restarts Phone.
#*3851# = Restarts Phone.
#*3876# = Restarts Phone.
#*7222# = Operation Typ: (Class C GSM)
#*7224# = !!! ERROR !!!
#*7252# = Operation Typ: (Class B GPRS)
#*7271# = CMD: (Not Available)
#*7274# = CMD: (Not Available)
#*7337# = Restarts Phone. (Resets Wap Settings)
#*2787# = CRTP ON/OFF.
#*2886# = AutoAnswer ON/OFF.
#*3737# = L1 AFC.
#*5133# = L1 HO Data.
#*7288# = GPRS Detached/Attached.
#*7287# = GPRS Attached.
#*7666# = White Screen.
#*7693# = Sleep Deactivate/Activate.
#*7284# = L1 HO Data.
#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# = Databattery.
#*2527# = GPRS switching set to (Class 4, 8, 9, 10)
#*2679# = Copycat feature Activa/Deactivate.
#*3940# = External looptest 9600 bps.
#*4263# = Handsfree mode Activate/Deactivate.
#*4700# = Please use function 2637.
#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# = Time ON.
#*3370# = Same as 4700.
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep.
#*7462# = SIM Phase.
#*7983# = Voltage/Freq.
#*7986# = Voltage.
#*8466# = Old Time.
#*2255# = Call Failed.
#*5187# = L1C2G trace Activate/Deactivate.
#*5376# = DELETE ALL SMS!!!!.
#*6837# = Official Software Version: (0003000016000702)
#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# = Permanent Registration Beep.
#*2474# = Charging Duration.
#*2834# = Audio Path. (Handsfree)
#*3270# = DCS Support Activate/Deactivate.
#*3282# = Data Activate/Deactivate.
#*3476# = EGSM Activate/Deactivate.
#*3676# = FORMAT FLASH VOLUME!!!
#*4760# = GSM Activate/Deactivate.
#*4864# = White Screen.
#*5171# = L1P1.
#*5172# = L1P2.
#*5173# = L1P3.
#*7326# = Accessory.
#*7683# = Sleep variable.
#*8465# = Time in L1.
#*2252# = Current CAL.
#*2836# = AVDDSS Management Activate/Deactivate.
#*3877# = Dump of SPY trace.
#*7728# = RSAV.
#*2677# = Same as 4700.
#*3728# = Time 2 Decod.
#*3725# = B4 last off.
#*7372# = Resetting the time to DPB variables.
#*7732# = Packet flow context bit Activate/Deactivate.
#*6833# = New uplink establishment Activate/Deactivate.
#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)
#*7722# = RLC bitmap compression Activate/Deactivate.
#*2351# = Blinks 1347E201 in RED.
#*4472# = Hysteresis of serving cell: 3 dB
#*2775# = Switch to 2 inner speaker.
#*9270# = Force WBS.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3757# = DSL UART speed set to. (LOW, HIGH)
#*8726# = Switches USBACM to Normal.
#*8724# = Switches USBACM to Generator mode.
#*8727# = Switches USBACM to Slink mode.
#*8725# = Switches USBACM to Loop-back mode.
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*8370# = Tfs4.0 Test 0.
#*8371# = Tfs4.0 Test 1.
#*8372# = Tfs4.0 Test 2.
#*8373# = Tfs4.0 Test 3.
#*8374# = Tfs4.0 Test 4.
#*8375# = Tfs4.0 Test 5.
#*8376# = Tfs4.0 Test 6.
#*8377# = Tfs4.0 Test 7.
#*8378# = Tfs4.0 Test 8.
#*8379# = Tfs4.0 Test 9.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*22671# = AMR REC START.
#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# = Pause REC.
#*22674# = Resume REC.
#*22675# = AMR Playback.
#*22676# = AMR Stop Play.
#*22677# = Pause Play.
#*22678# = Resume Play.
#*77261# = PCM Rec Req.
#*77262# = Stop PCM Rec.
#*77263# = PCM Playback.
#*77264# = PCM Stop Play.
#*22679# = AMR Get Time.
*#8999*364# = Watchdog ON/OFF.
*#8999*427# = WATCHDOG signal route setup.
*2767*226372# = Camera Reset. (deletes photos)
*2767*3855# = E2P Full Reset.
*2767*2878# = E2P Custom Reset.
*2767*927# = E2P Wap Reset.
*2767*226372# = E2P Camera Reset.
*2767*688# = Reset Mobile TV.
#7263867# = RAM Dump. (On or Off)
~Samsung Mobile Lock Codes~
*#7465625# = Check the locks.
*7465625*638*Code# = Enables Network lock.
#7465625*638*Code# = Disables Network lock.
*7465625*782*Code# = Enables Subset lock.
#7465625*782*Code# = Disables Subset lock.
*7465625*77*Code# = Enables SP lock.
#7465625*77*Code# = Disables SP lock.
*7465625*27*Code# = Enables CP lock.
#7465625*27*Code# = Disables CP lock.
*7465625*746*Code# = Enables SIM lock.
#7465625*746*Code# = Disables SIM lock.
*7465625*228# = Activa lock ON.
#7465625*228# = Activa lock OFF.
*7465625*28638# = Auto Network lock ON.
#7465625*28638# = Auto Network lock OFF.
*7465625*28782# = Auto subset lock ON.
#7465625*28782# = Auto subset lock OFF.
*7465625*2877# = Auto SP lock ON.
#7465625*2877# = Auto SP lock OFF.
*7465625*2827# = Auto CP lock ON.
#7465625*2827# = Auto CP lock OFF.
*7465625*28746# = Auto SIM lock ON.
#7465625*28746# = Auto SIM lock OFF.
~Samsung Mobile MMS Codes~
*2767*43927# = Austria WAP Settings.
*2767*420927# = Czech WAP Settings.
*2767*33927# = France WAP Settings.
*2767*49927# = Germany WAP Settings.
*2767*30927# = Greece WAP Settings.
*2767*39927# = Italy WAP Settings.
*2767*31927# = Netherlands WAP Settings.
*2767*351927# = Portugal WAP Settings.
*2767*7927# = Russia WAP Settings.
*2767*34927# = Spain WAP Settings.
*2767*46927# = Sweden WAP Settings.
*2767*44927# = UK WAP Settings.
*2767*380927# = Ukraine WAP Settings.
*2767*73738927# = WAP Settings Reset.
*2767*43667# = Austria MMS Settings.
*2767*420667# = Czech MMS Settings.
*2767*33667# = France MMS Settings.
*2767*49667# = Germany MMS Settings.
*2767*30667# = Greece MMS Settings.
*2767*39667# = Italy MMS Settings.
*2767*31667# = Netherlands MMS Settings.
*2767*351667# = Portugal MMS Settings.
*2767*7667# = Russia MMS Settings.
*2767*34667# = Spain MMS Settings.
*2767*46667# = Sweden MMS Settings.
*2767*44667# = UK MMS Settings.
*2767*380667# = Ukraine MMS Settings.
~Samsung Mobile Sound Codes~
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
~Samsung Mobile Email Codes~
#*36245# Turns Email TestMenu on.
*2767*22236245# Email EPP set (....)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email...
*2767*3136245# Email...
*2767*3336245# Email...
*2767*3436245# Email...
*2767*3936245# Email...
*2767*4136245# Email...
*2767*4336245# Email...
*2767*4436245# Email...
*2767*4536245# Email...
*2767*4636245# Email...
*2767*4936245# Email...
*2767*6036245# Email...
*2767*6136245# Email...
*2767*6236245# Email...
*2767*6336245# Email...
*2767*6536245# Email...
*2767*6636245# Email...
*2767*8636245# Email...
*2767*85236245# Email...
Click to expand...
Click to collapse
Nearly all of these codes don't work on my sgs4g... Im running GB 2.3.5 ROM with KJ1 kernel. Does that make a difference?
Search sgs secret codes on the market.
Sent from my SGH-T959V using xda premium
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hi,
here is interesting list of SAMSUNG devices secret codes. I hope so that is right thread for that
These Secret Codes can be used on All Samsung Mobile Phones.
1. Software version: *#9999#
2. IMEI number: *#06#
3. Serial number: *#0001#
4. Battery status- Memory capacity : *#9998*246#
5. Debug screen: *#9998*324# – *#8999*324#
6. LCD contrast: *#9998*523#
7. Vibration test: *#9998*842# – *#8999*842#
8. Alarm beeper – Ringtone test : *#9998*289# – *#8999*289#
9. Smiley: *#9125#
10. Software version: *#0837#
11. Display contrast: *#0523# – *#8999*523#
12. Battery info(ADC, RSSI reading): *#0228# or *#8999*228#
13. Display storage capacity: *#8999*636#
14. Display SIM card information: *#8999*778#
15. Show date and alarm clock: *#8999*782#
16. The display during warning: *#8999*786#
17. Samsung hardware version: *#8999*837#
18. Show network information: *#8999*638#
19. Display received channel number and received intensity: *#8999*9266#
20. *#1111# S/W Version
21. *#1234# Firmware Version
22. *#2222# H/W Version
23. *#8999*8376263# All Versions Together
24. *#8999*8378# Test Menu
25. *#4777*8665# GPRS Tool
26. *#8999*523# LCD Brightness
27. *#8999*377# Error LOG Menu
28. *#8999*327# EEP Menu
29. *#8999*667# Debug Mode
30. *#92782# Phone Model (Wap)
31. #*5737425# JAVA Mode
32. *#2255# Call List
33. *#232337# Bluetooth MAC Adress
34. *#5282837# Java Version
35. Type in *#0000# on a Samsung A300 to reset the language
36. Master reset (unlock) #*7337# (for the new samsungs E700 x600 but not E710)
37. Samsung E700 type *#2255# to show secret call log
38. Samsung A300, A800 phone unlock enter this*2767*637#
39. Samsung V200, S100, S300 phone unlock :*2767*782257378#
40. #*4773# Incremental Redundancy
41. #*7785# Reset wakeup & RTK timer cariables/variables
42. #*7200# Tone Generator Mute
43. #*3888# BLUETOOTH Test mode
44. #*7828# Task screen
45. #*#8377466# S/W Version & H/W Version
46. #*2562# Restarts Phone
47. #*2565# No Blocking? General Defense.
48. #*3353# General Defense, Code Erased.
49. #*3837# Phone Hangs on White screen.
50. #*3849# Restarts Phone
51. #*7337# Restarts Phone (Resets Wap Settings)
52. #*2886# AutoAnswer ON/OFF
53. #*7288# GPRS Detached/Attached
54. #*7287# GPRS Attached
55. #*7666# White Screen
56. #*7693# Sleep Deactivate/Activate
57. #*2286# Databattery
58. #*2527# GPRS switching set to (Class 4, 8, 9, 10)
59. #*2679# Copycat feature Activa/Deactivate
60. #*3940# External looptest 9600 bps
61. #*4263# Handsfree mode Activate/Deactivate
62. #*2558# Time ON
63. #*3941# External looptest 115200 bps
64. #*5176# L1 Sleep
65. #*7462# SIM Phase
66. #*7983# Voltage/Freq
67. #*7986# Voltage
68. #*8466# Old Time
69. #*2255# Call Failed
70. #*5376# DELETE ALL SMS!!!!
71. #*6837# Official Software Version: (0003000016000702)
72. #*2337# Permanent Registration Beep
73. #*2474# Charging Duration
74. #*2834# Audio Path (Handsfree)
75. #*3270# DCS Support Activate/Deactivate
76. #*3282# Data Activate/Deactivate
77. #*3476# EGSM Activate/Deactivate
78. #*3676# FORMAT FLASH VOLUME!!!
79. #*4760# GSM Activate/Deactivate
80. #*4864# White Screen
81. #*7326# Accessory
82. #*7683# Sleep variable
83. #*3797# Blinks 3D030300 in RED
84. #*7372# Resetting the time to DPB variables
85. #*3273# EGPRS multislot (Class 4, 8, 9, 10)
86. #*7722# RLC bitmap compression Activate/Deactivate
87. #*2351# Blinks 1347E201 in RED
88. #*2775# Switch to 2 inner speaker
89. #*7878# First Startup (0=NO, 1=YES)
90. #*3838# Blinks 3D030300 in RED
91. #*2077# GPRS Switch
92. #*2027# GPRS Switch
93. #*0227# GPRS Switch
94. #*0277# GPRS Switch
95. *22671# AMR REC START
96. #*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
97. #*22673# Pause REC
98. #*22674# Resume REC
99. #*22675# AMR Playback
100. #*22676# AMR Stop Play
101. #*22677# Pause Play
102. #*22678# Resume Play
103. #*77261# PCM Rec Req
104. #*77262# Stop PCM Rec
105. #*77263# PCM Playback
106. #*77264# PCM Stop Play
107. #*22679# AMR Get Time
108. *#8999*364# Watchdog ON/OFF
109. *#8999*427# WATCHDOG signal route setup
110. *2767*3855# = Full Reset (Caution every stored data will be deleted.)
111. *2767*2878# = Custom Reset
112. *2767*927# = Wap Reset
113. *2767*226372# = Camera Reset (deletes photos)
114. *2767*688# Reset Mobile TV
115. #7263867# = RAM Dump (On or Off)
116. *2767*49927# = Germany WAP Settings
117. *2767*44927# = UK WAP Settings
118. *2767*31927# = Netherlands WAP Settings
119. *2767*420927# = Czech WAP Settings
120. *2767*43927# = Austria WAP Settings
121. *2767*39927# = Italy WAP Settings
122. *2767*33927# = France WAP Settings
123. *2767*351927# = Portugal WAP Settings
124. *2767*34927# = Spain WAP Settings
125. *2767*46927# = Sweden WAP Settings
126. *2767*380927# = Ukraine WAP Settings
127. *2767*7927# = Russia WAP Settings
128. *2767*30927# = GREECE WAP Settings
129. *2767*73738927# = WAP Settings Reset
130. *2767*49667# = Germany MMS Settings
131. *2767*44667# = UK MMS Settings
132. *2767*31667# = Netherlands MMS Settings
133. *2767*420667# = Czech MMS Settings
134. *2767*43667# = Austria MMS Settings
135. *2767*39667# = Italy MMS Settings
136. *2767*33667# = France MMS Settings
137. *2767*351667# = Portugal MMS Settings
138. *2767*34667# = Spain MMS Settings
139. *2767*46667# = Sweden MMS Settings
140. *2767*380667# = Ukraine MMS Settings
141. *2767*7667#. = Russia MMS Settings
142. *2767*30667# = GREECE MMS Settings
143. *#7465625# = Check the phone lock status
144. *7465625*638*Code# = Enables Network lock
145. #7465625*638*Code# = Disables Network lock
146. *7465625*782*Code# = Enables Subset lock
147. #7465625*782*Code# = Disables Subset lock
148. *7465625*77*Code# = Enables SP lock
149. #7465625*77*Code# = Disables SP lock
150. *7465625*27*Code# = Enables CP lock
151. #7465625*27*Code# = Disables CP lock
152. *7465625*746*Code# = Enables SIM lock
153. #7465625*746*Code# = Disables SIM lock
154. *7465625*228# = Active lock ON
155. #7465625*228# = Active lock OFF
156. *7465625*28638# = Auto Network lock ON
157. #7465625*28638# = Auto Network lock OFF
158. *7465625*28782# = Auto subset lock ON
159. #7465625*28782# = Auto subset lock OFF
160. *7465625*2877# = Auto SP lock ON
161. #7465625*2877# = Auto SP lock OFF
162. *7465625*2827# = Auto CP lock ON
163. #7465625*2827# = Auto CP lock OFF
164. *7465625*28746# = Auto SIM lock ON
165. #7465625*28746# = Auto SIM lock OFF
166. Type *#9998*627837793# Go to the ‘my parameters’ and there you will find new menu where you can unlock phone.
167. To unlock a Samsung turn the phone off take the SIM card and type the following code *#pw+15853649247w# .
168. Java status code: #*53696# (Samsung X600)
169. If you want to unlock your phone put a SIM from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other SIM in and it will say SIM lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call button and it’s unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn’t work you will have to reset your phone without a SIM in it by typing *#2767*2878# or *#9998*3855#
For Galaxy S5 and some other models:
*#12580*369# to check software and hardware information.
*#32489# Service mode
*#7780# Factory data reset galaxy S5
*2767*3855# Full factory reset (Don't dial it does not ask you to confirm unless you have problem)
*#0*# To check the various hardware components of your Samsung Galaxy S5
Find and enjoy in your code :highfive:
I wanted to know if by chance you know what this 9. Smiley: *#9125# code does? I would greatly appreciate it if you could enlighten me with an answer because it has been bugging me ever since I first discovered it and I would rather not risk trying it on my phone since it is my primary phone.
DaPac01 said:
I wanted to know if by chance you know what this 9. Smiley: *#9125# code does? I would greatly appreciate it if you could enlighten me with an answer because it has been bugging me ever since I first discovered it and I would rather not risk trying it on my phone since it is my primary phone.
Click to expand...
Click to collapse
Also I was curious I can tell you that on samsung A71 with andrid 11 the code does not work I think that every frmware changes something in the "secret codes"
I've successfully bypassed the hotspot authentication and am able to launch my mobile hotspot by following the adb method found here: http://forum.xda-developers.com/att-lg-g3/general/lg-g3-d850-unlock-mobile-hotspot-t3049518
But when I connect to my hotspot with any wifi enabled devices, I cannot connect to the internet.
I have unlimited 4G LTE data with Metro PCS and am using an unlocked rooted AT&T LG G3 D850 phone, running on Android 5.0.1. My data works fine on the device.
Would anybody have any tips or potential solutions?
Thanks in advance.
For anybody that is having a similar problem to me, I figured it out.
The problem was my APN settings. On MetroPCS use the following APN settings:
Code:
Name = T-Mobile
APN = fast.t-mobile.com
Proxy = Not set
Port = Not set
Username = Not set
Password = Not set
Server = Not set
MMSC = h t t p ://metropcs.mmsmvno. com/mms/wapenc
MMProxy = Not set
MMPort = 80
MCC = 310
MNC = 260
Autent type= Not set
APN type = Not set
APN protoc= IPv4
Bearer = Unspecified
Movile virtual network operator type= none
The hotspot will then work with no problems at all.