Related
MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\Parms\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\Parms\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
papamopps said:
MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
Click to expand...
Click to collapse
This did the the trick for me running NottoSmart Vanilla. I had wifiinit.lnk in startup, it was the reg key values that did the trick for me.
I don't have any SPB programs installed, although I did try one out, but then uninstalled it, so maybe that is what "broke" itm since I know wireless was working when I installed the ROM. I currently have the following programs installed if that helps...
Voice Command 1.6
Pocket Mechanic
Sharkey Softkey Changer
JamDat Worms
Registry Wizard
Battery Status 1.3 beta
Live Search
TOtal Commander
CorePlayer
CoolCamera
Treo Picture dialer
SP TimeSync
PQzII Wizard
Phone Alarm with B&W Pure skin
Foxit PDF
Tascal CloseAll
THANKS!!! for figuring this out!
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
zoki said:
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
Click to expand...
Click to collapse
Sorry, sure it is Parm I edit in first Post.
Thanks
(I answerd this settings so often that I now wrote it wrong)
Sorry to all searching the wrong settings - now it is right in first post.
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
HTCPreloadStatus doesn't stick?
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Here is my experience. I was having intermittent inability to enable WiFi. Sometimes this was rectified with a soft reset, other times not. I checked the two keys and they were both set to zero.
I applied the changes and re-booted after waiting awhile. I noticed that the WiFi came on after reset without having to enable it. I am running mUn with the collected fixes from NotTooSmart.
I have since toggled and re-toggled and re-booted my Wizard and all seems well. However, HTCPreloadStatus is set to zero on mine regardless of whether the WiFi is on or not.
It is all working though.
zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Have you tried to softreset by switching off with 5sec Powerbutton? And the turn on again?
zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks!!!!!
I allways have problem creating a cab file with WinCECabmanager.
Is there a how to somewhere?
I just cant install the new comm manager.
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
Hi there m8. I just couldnt install the new comm manager. I just upload it to my device and try it to install in the main memory but i just cant.
This is weird. :s
Any advice ???
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Yes... that did it.
mfrazzz said:
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Click to expand...
Click to collapse
It was very strange. I did copied the cab into the phones main memory, executed and voila.
Thankx m8
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
dcdivenut said:
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
Click to expand...
Click to collapse
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
papamopps said:
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
Click to expand...
Click to collapse
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
dcdivenut said:
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
Click to expand...
Click to collapse
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
papamopps said:
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
Click to expand...
Click to collapse
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
dcdivenut said:
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
Click to expand...
Click to collapse
"Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?"
That was mentioned by me.
To your question. My settings stay even after softreset. Do you change it and turn off device by powerbutton for 5seconds? For this ever works regarding to reghacks.
Didn´t wanted to stress you. Discussion is the way this forum lives!
dcdivenut said:
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Click to expand...
Click to collapse
Yes, thats the one. But for the wizard there is a reg key you have to remove or it breaks your Wifi. Please look at the XPlore thread for discussion on this (or as suggested, start a new thread specifically about the 10 button comm manager. It probably needs a seperate thread anyway).
Hi All,
This is driving me nuts - posted before in "TNT" discussion but didn't get a response.
I am unable to use any number keys when in a call. Can't "select 1 to reach...blah blah blah" or press "7 to delete this message", etc.
I've installed, re-installed TNT, tried different radios, etc. Only seems to happen with TNT, but would like to keep it as the other features are great.
Anyone have a fix or suggestion? Here are my pertinent stats:
ROM: TNT.1933 TouchFLO Edition
I/SPL: 2.25
Radio: 2.19.11
OS: 11.0.0.1
Any suggestions would be massively appreciated as I do NOT want to have to uninstall TNT again, futz around and re-install (it does seem to work for a short while after doing so, but then stops, and what a pain in the arse!)
Thanks,
-tynk-
This is junk TNT issue!
got same rom and dont have this issue..
you just have to press the left button which says "keypad"
Sorry, should have been more specific, but I've got the flu, so not on my toes!
I can view, press, and even hear the keytones in call, but they do NOT register on the other end. No matter how many times I press "7", and hear the tone, voicemail doesn't hear it (I end up with a full mailbox pretty quick!) Or when trying to "press 1 for...", I can press 1, hear the tone, but the system on the other end doesn't register it.
Okay, it may be "junk TNT issue" (or it may just be related to TNT in that one of the progs bundled in TNT or settings I've ticked is the culprit), but what ROM or fix do you recommend? Not a particularly helpful post? Why bother?
Thanks!
I had the very same problem. Check out this post as he answered the question for me...
ADB100 said:
Yep, I had this issue. The solution is simple however - change the following in the registry:
Code:
[HKLM\Drivers\BuiltIn\RIL]
EnableDTMFSupport=0x0
In previous ROMs it looks like the setting 0x00000001 enabled DTMF support and in this ROM 0x00000000 enables it.... Bit weird but it worked for me.
Andy
Click to expand...
Click to collapse
It worked perfectly for me.
Thanx.
yup that is the only thing it can be
the problem was allready solved ..
dumb
maybe I'm a real dumbass but how (TF do I get into my Qtek's Registry?? I cannot find anything about that in the forum
NEVSKI
Got It!!
I used CeRegeditor and that did the job for me: in registry find DRIVERS\BUILDIN\RIL\ and put EnableDTMFSupport on 0 (it was on 1) strangly after reboot it works for me! (and before you change or open anything first 'unlock registry' in de CeregEditor (tools)
NEVSKI
if you dont know how to get into the registry there is a cab floating around that correct DTMF tones and I think some software. I had this issue on a rom and I downloaded a cab that fixed it. If I find it on my computer I will post it for you. Do a search for DTMF tones.
Hi I have problem permanently hide SIM contact.
I used registry editor and made this chage:
HKEY_CURRENT_USER\ControlPanel\Phone
"ShowSim"=dword:0
It works perfectly until I made soft reset. After soft reset went the value ShowSim back on 1 and I see the SIM contact again.
Am I doing something wrong ? I made many others changes in registry which are without change after soft reset.
Please help.
Many thanks
ROM 1.90.401.1 WWE
Radio 1.02.25.19
Change the value to 0,close properly regeditor(menu-exit) and softreset using some software utility or hold power key for power off. Don't use hardware reset button!
Hide SIM contacts with
You can hide contacts with Advanced Config It really works even after soft reset...
This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks
heba said:
This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks
Click to expand...
Click to collapse
This also happens on my device, have tried changing this in AC and editing the reg, but with a soft reset it comes back
This program should help (it has been written for diamond).
http://forum.xda-developers.com/showthread.php?p=2413858
ThomasNM's advice worked for me
Great ! NikiSimFix is working perfectly !!!
Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.
bzdziagwa said:
Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.
Click to expand...
Click to collapse
I'm lost, I've tried this just now and again they keep coming back I really don't know what else to do now
It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.
bzdziagwa said:
It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.
Click to expand...
Click to collapse
I just don't get it anymore....
After doing all these steps it just won't work.
In my contact list I can see still all my contacts twice.
True my mobile shell I can see my contacts twice...
ONLY with my spb diary I see them once....
Really really strange.. who gets this?
@ Pensador:
have you tried this already?
http://forum.xda-developers.com/showpost.php?p=1769534&postcount=2
Offtopic and in Dutch:
hey iemand van de TouchPro Hyve
heey thnx 4 your reply...
No I didn't try that one because I don't want to erase everything on my sim...
Just a precaution....because if someday ( only god knows when ) my device crashes of whatever....I will loose all my contacts....and that's something i do not like...
@ offtopic in dutch:
hehe, jah leuk eh. Maar ik denk dat wel meerdere van hyves hier op t forumpje zitten hoor .
it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)
no solution mentioned above working here either. nicksimfix wouldn't do it
For those who can't get this working, which ROM are you using? NikiSimFix worked fine for me on the stock ROM, but I've tried everything on DCS V13 and V14 ROMs and nothing works.
Interestingly if you make the registry change and you don't use TouchFlo 3D then this is fine, but as soon as TouchFlo starts the SIM contacts reappear. What I have found is that if you make the registry change after a soft reset the SIM contacts will remain hidden until the next soft reset (or until you manually restart TouchFlo).
I made a .reg file to do this quickly (below), but I would still rather find a permanent solution.
Rowan
Xtreme XL said:
it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)
Click to expand...
Click to collapse
ahh allrighty...I misunderstood it then...
But also this fix didn't work 4 me...
Get a little bit tyred of it now....I just don't understand why I still can see all my contacts twice!
I will explain what I did...
I did the setting in AC, then I checked the setting in DT after that I checked the setting @Regiustry editor... So now knew 4 sure everything was off.
I runned my .cab and after that I turned my tp down.. no reset but just turned it down...
didn't work.. also didn't work witrh a soft reset...
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
iRiKi said:
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
Click to expand...
Click to collapse
THNX 4 your reply! but It still doesn't work!
I think I tried about everything right now!
4 the people who maybe have a solution....I use spb mobile shell....
Finally up!!!
http://www.htc.com/us/SupportDownload.aspx?p_id=198&cat=2&dl_id=553
and yes the s/n works! already downloaded
(via fuzemobility.com)
dont know if yours says something different than mine but i got the good old 404 error page so i'm guessing they pulled it again...
If you got it can you upload it to rapidshare or something?
nate
IT worked for me thanks for checking again....
Site was up for 2 or 3 hours today, then they took it down
I'm at work but still downloaded it to this computer while i had the chance (this time it actually accepted my S/N!)
I have the file, but its 145mb,
If someone wants to get it, send me a PM and let me know how you want me to send it.
Bummer...
All I get for my fuse s/n is: Sorry, this software download is not suitable for your device.
The link worked for me just now. Took my serial number and was able to get the download.
Thanks for the link
Downloading it now
1 hour, 46 minutes remaining. I just got my phone today, I must be blessed. Agonized over whether I should get it for days. Now I know
edit: it works, it's much faster. nifty. tired zzz
here are a few mirrors posted over at fuzemobility:
mine: http://ow.ly/aVUu
raudel: http://198.145.64.149/RUU_Raphael_C..._Sign_Raphael_52.64c.25.35_1.14.25.35_Ship.ex
doug from blownfuze: http://blownfuze.org/files/RUU_Raph...Radio_Sign_Raphael_52.64c.25.35_1.14.25.35_Sh
nhshah7 said:
Finally up!!!
http://www.htc.com/us/SupportDownload.aspx?p_id=198&cat=2&dl_id=553
and yes the s/n works! already downloaded
(via fuzemobility.com)
Click to expand...
Click to collapse
this is the wrong thread for a ROM . plus its all over the ROM AND DEVELOPEMENT THREAD...
I just installed this ROM from one of the mirrors, now it seems I have a ringtone file size limit, the ones I'm trying to use range from 638kb to 757kb. I was able to use them before the update. I could press and hold and set it to default, if that would even work, but I'm using these for individual contacts.
I've already tried changing HKCU/ControlPanel/Sounds/FileSizeLimit to 607200, but no luck. Any ideas?
EDIT: I'm starting to wonder about this ROM, my ringtone issue, now I've learned that SMS messages show up in TF3D, but not in the inbox, the orange 1 notifier is not going away... not enjoying this so far. May have to hunt for the old ROM.
nhshah7 said:
here are a few mirrors posted over at fuzemobility:
mine: http://ow.ly/aVUu
raudel: http://198.145.64.149/RUU_Raphael_C..._Sign_Raphael_52.64c.25.35_1.14.25.35_Ship.ex
doug from blownfuze: http://blownfuze.org/files/RUU_Raph...Radio_Sign_Raphael_52.64c.25.35_1.14.25.35_Sh
Click to expand...
Click to collapse
None of those links work
Anything new the chefs can use from this ROM?
sirpwn4g3 said:
I just installed this ROM from one of the mirrors, now it seems I have a ringtone file size limit, the ones I'm trying to use range from 638kb to 757kb. I was able to use them before the update. I could press and hold and set it to default, if that would even work, but I'm using these for individual contacts.
I've already tried changing HKCU/ControlPanel/Sounds/FileSizeLimit to 607200, but no luck. Any ideas?
EDIT: I'm starting to wonder about this ROM, my ringtone issue, now I've learned that SMS messages show up in TF3D, but not in the inbox, the orange 1 notifier is not going away... not enjoying this so far. May have to hunt for the old ROM.
Click to expand...
Click to collapse
i don't have this problem...i set an mp3 as my ringtone. i think it worked? i'll get back to you about that. and i have teh leaked test rom file still if you want that one
behrouz said:
None of those links work
Click to expand...
Click to collapse
sorry, took mine down because i thought the blownfuze mirror worked. i'll put it back up now (the ow.ly link)
@ whoever was telling me this was in teh wrong thread, yeah i know this isn't the rom thread but not everyone reads through teh rom thread regularly or frequently.
http://www.htc.com/us/faq_detail.aspx?p_id=198&act=faq&cat=0
no need for mirrors anymore. It looks like its up for REAL this time.
Weird, am i the only guy who can't see .wav ringtones in the ringtones menu under setting? i only got 3 of my 40 to show up there and their all under 100kb.
is there some new file limit? i can still use my ringtones if i use the file explorer to set it for me.
Got the new and improved ROM, SMS works fine, haven't noticed yet if I'm connecting to data after a call, still having ringtone issues. I cut one ringtone down to 300kb and it still doesn't show up in the drop down menu to set it as an individual contact tone or to set it as my generic tone. I can tap and hold to set it as the tone, but that's not what I'm going for.
It was nice of them to make PTT button reassignable by default with the new ROM however the option to use it to Lock device is absent
sirpwn4g3 said:
Got the new and improved ROM, SMS works fine, haven't noticed yet if I'm connecting to data after a call, still having ringtone issues. I cut one ringtone down to 300kb and it still doesn't show up in the drop down menu to set it as an individual contact tone or to set it as my generic tone. I can tap and hold to set it as the tone, but that's not what I'm going for.
Click to expand...
Click to collapse
so there is a new ringtone limit.
Opera Mobile won't run after update
After applying this update to my Fuze without apparent issues everything seems to be working as expected except for Opera. The 'Opera Mobile' splash appears for about 20 seconds and then disappears. Has anyone else seen this behavior?
Hi everyone!
I've been going through this ENTIRE forum, and countless others on top of dozens upon dozens of google searches, and I still haven't found a solution to my SMS timestamp error.
All the solutions offered up by people seem seriously promising, because they seem to help a lot of people, and that is what's kept me hopeful: that someone out there/in here can help me fix this problem.
Basically, I have an unlocked Fido Motorola Q9h, that is being used on the Rogers network. Never delved into flashing my device, cuz I was happy with WM6. Not to mention I'd got it tweaked to a very lovely point
Then a week ago, my phone locked up after I'd put my phone into airplane mode (I'd done this countless times before with no issue), and just would not let me turn the antenna back on. Nothing I tried worked, so of course I eventually caved and did a hard reset. That was when I figured I would give WM6.1 a try, seeing as how my device was gonna be starting from scratch anyway.
I flashed to an unlocked AT&T WM6.1 ROM, and went ahead with all the registry tweaks to remove all the bloatware. Phone is pretty damn clean if I do say so myself. I've got PHM on there, GPSID, CHome COnfigurator, and that's really about it.
After all that was said and done, and I got my first SMS, I realized the message was timestamped 4 hours behind. Every single SMS from every single contact shows timestamped 4 hours earlier. In the threaded SMS stream, my messages are timestamped correctly, but the other peoples' aren't.
Example:
Me (7:37): Send me a text to see if this timestamp issue's been fixed.
Steph (3:37): Okay =)
The strange thing is that MMS messages come in with the correct timestamp, and that is something that seriously boggles my mind.
Please, please, PLEASE. If anyone out there has some kind of suggestion, I would absolutely love to hear it. Here are the remedies I've tried that have had no effect:
-Installed DST cab from Microsoft.
-"TrustTimeZoneField" w/DWORD value of "0" minus quotations of course
-"TrustTimeZoneField" wDWORD value of "1" to allow the device to trust the provider's time just in case my phone was screwing up.
-"RcvTimeStamp" w/DWORD value of "1"
-tweaked some "NetworkTimeSync" (or something along those lines) entry to a value of "1" instead of its current value of "0," but nothing.
I'm at the end of my rope here guys and girls, so please, anything you can suggest that I haven't already tried would be infinitely appreciated
Thanks in advance everybody
although i dont know the answer ive got a thing for you to try
in the setting section make sure you regional settings are set correctly
Thanks Pilot, will double check those settings. Well, as per your instructions, I've double-checked the settings, and they're correct. Have my locale set as English (Canada), and nothing. Even changed it to English (United States) just to see, but to no avail.
*sigh*
I am almost at my wits end...Is there no one out there with a Q9h running the unlocked AT&T WM6.1 ROM, that's having the same issue??? Or even better, someone out there who's SOLVED the issue?
I've even called Rogers and they suggested a new SIM card, seeing as how I have the original SIM from Rogers, and I'm waiting on it. I've even tried my sister's SIM which is a new one, but nothing. Figure it HAS to be the ROM
Found a solution to timestamp issue with q9 & wm6.1!!!
Hi everyone!!!
I can't believe I'm actually going to be the person posting the solution to this problem, but I guess it's true that perseverance pays off
This post is in regards to the sms timestamp issue that I've noticed several people are having with the moto q9 once they upgrade to wm6.1 and are on a Canadian service provider.
***This solution involves modifying your device's registry, so if you do not feel comfortable or are unfamiliar with the process, please do not proceed with the modification. I will not be held responsible for any bricked/malfunctioning devices as a result of this tweak***
Use a reg editor (I used the free PHM registry editor), and navigate to:
-HKLM (HKey Local Machine)
-Software
-Motorola
-RilDrv
Now that you're in the RilDrv Folder, there should be a few more folders in here...don't navigate to any specific one, just click the "values" softkey (whatever it may be for your devices), and somewhere in the values that become visible, you should see one that says "LocalizedTimeStamp." Open that value and modify it's value to "0" (without the " " of course)
Reboot your device, wait 10 seconds, cross your fingers and toes, and restart your device. Once your device is fully booted, and seems to be functioning normally, send yourself a text message, and check the received timestamp. It *should* be correct (ie. a minute or two or less in the future of your sent timestamp). To be sure it isn't just for your own texts, ask someone to text you anything, and hopefully the result it yields will be the same.
I have only tested this solution on an unlocked Motorola Q9h from Fido, running the unlocked AT&T WM6.1 ROM on Rogers.
I serached for close to a month with no real viable solution, so I just kept poking and prodding at my registry. Yeah, kinda dangerous I know, but I was at my wits end with this little bug. Finally though, the time and investigation paid off
Hope it goes well for all of you out there who are having the same problem!