Hey everyone,
I am not sure where else to turn at this point but xda... I had an AT&T Tilt that I had modded quite well to my liking, but then I lost it. So I had to revert back to my old Motorola Q9h. There are a few quirks about reverting back to a smartphone from a PPC that are bugging me. Like how I can't find anything like bitpim to back up all my text messages so I can upgrade to 6.1. I have a lot of text messages, some that I need to retain in case some legal dispute happens in the future with my ex. Anyway, that's minor, I can live with 6.0 for now. Threaded messaging would be the only real benefit for me and it's not a must have in this case.
Anyway, on to the reason I am posting. I don't know what happened with my speed dial function but for some reason, my 1 key does not link to my voicemail anymore. I don't have the default voicemail contact that comes with the phone and I don't have a clue what happened to it. I tried creating a new contact with the voicemail number and assigning it to the appropriate speed dial button, but it says 1 and 0 are "Reserved". I have searched numerous forums for some help with this to no avail.
So I decided to try and see if I could figure it out myself (sounds ominous, I know, I know, but I haven't changed anything yet, don't worry ). I sat at work today, bored out of my mind, and decided to just look through the phone to at least pinpoint the location of the speed dial contents in the registry. The only thing I have found that sounds promising is located at:
HKCU\ControlPanel\Dial\Locations\
BUT... I don't read or write in this language. I could also be in the completely wrong location. Any guidance from this point onwards would be greatly appreciated. If you need any more details, please ask.
--Steven
Hi guys!
Was poking around online, and found this page: http://www.phonedog.com/cell-phone-research/blog/part-1-guide-to-windows-mobile.aspx . It lists a few great programs (many of which have been developed by you folx here at xda). There are two phenomenal ones that work quite well on my TP2.
The first is the SD card tuneup. I don't know why, but it seems to make my WHOLE PHONE go faster. I love it.
The second is the advanced configuration utility. A great way to access tons of settings to better tweak your phone.
Hope it helps you guys as much as it does me.
Warning for verizon users
Be very careful here and learn from my mistake. I did the reg edit from the linked page for increasing the threaded sms space. I copied the file over to my PC, made the edit, pasted back and reset. When I went into text messages and clicked "all messages" it wouldn't open. I hit reply and it wouldn't open. They only way I could send a text was either from favorites or contacts. I still had the original file so I pasted it back reset but but still f'ed up. I finally had to hard reset to fix it.
Another Warning
I would recommend not using the Advanced Configuration program on CDMA phones. Apparently some settings are just different enough to cause weird problems, one of which is being unable to answer an incoming call. (had that happen on my mogul), still see threads warning about using it on CDMA TP2, so be ready to hard reset if you do decide to try it out.
Advanced Config Tool on Sprint TP2
Thank you last poster on the issue with CDMA and Advanced Configuration Utility. I've been beating my head against the wall trying to figure out why I'm having so much trouble answering the phone. Sometimes I can answer, sometimes not. I've also noticed a few other strange behaviors like not getting the pop up "snooze" message I used to get when using the phones built in alarm.
Looks like my only way of not only removing the ACU but also fixing these problems is a hard reset? That seriously sucks, but at least I have a potential for getting these functions working again.
mvbpma said:
Thank you last poster on the issue with CDMA and Advanced Configuration Utility. I've been beating my head against the wall trying to figure out why I'm having so much trouble answering the phone. Sometimes I can answer, sometimes not. I've also noticed a few other strange behaviors like not getting the pop up "snooze" message I used to get when using the phones built in alarm.
Looks like my only way of not only removing the ACU but also fixing these problems is a hard reset? That seriously sucks, but at least I have a potential for getting these functions working again.
Click to expand...
Click to collapse
Here's a link to a way to fix things without a hard reset. At least it will fix the phone
answering problem. Be sure to stop using Adv Conf too!
http://forum.ppcgeeks.com/showpost.php?p=1205964&postcount=16
I really hope someone can help me with this, because I'm going crazy.
This will require a little history, so bear with me. A couple of weeks ago, I lost my Fuze. Last week, I bought a cheap (prepaid) AT&T GoPhone and called AT&T to have my number transferred to it. I used that phone successfully for several days, until this morning, when my lost phone showed up!
I was ecstatic, thinking that now I'd finally be able to sleep again p), but my excitement changed to disappointment after spending 30 or 40 minutes on the phone with AT&T, explaining my situation over and over to get them to understand what I needed, then following their instructions, and finding that my phone wouldn't work.
They informed me that my old SIM card had been disabled and was therefore useless, and suggested that I put the card from my GoPhone in my Fuze. I did so, but when I then turned the phone on, I got this message:
*****
Owner: Keith Russell
(xxx) xxx-xxxx
Enter your password and tap "Unlock". You can also enter an emergency phone number.
*****
My phone has been passworded in the past, but not recently, because I was trying to resolve some problems and was doing a lot of soft resets and didn't want to have to deal with the logon security. On the other hand, I'm pretty sure the message I was seeing was one I had never seen before. Nevertheless, I tried all the passwords I could think of that I had used on the phone in the past, but none of them worked. Every time, I got this message:
The password you typed is incorrect.
I called AT&T again, and this time spent over an hour on the phone with an AT&T rep and later, an HTC rep. We tried several default passwords, which also didn't work, and the HTC rep finally had me do a hard reset.
I installed my registered version of Sprite Backup 6.5 and restored my most recent good backup. The restore was successful and the application did a soft reset when it was done. Things seemed to be working fine and I spent a couple of hours cleaning up duplicate or large notes to free up memory. I also emptied the recycle bin in Resco Explorer. I then did a soft reset, thinking that might help with the cleanup.
Believe it or not, when the soft reset completed, I got the unlock prompt again!
So I'm stuck. I'm hesitant to do yet another hard reset and restore, because I expect that the same thing would happen again, eventually. I'm also not very excited about calling AT&T Support, because they didn't seem to know any more than I did about this problem.
I have no idea where this unlock prompt is coming from: whether it's hardware, firmware, OS, or application specific. I do have Pocket Secure installed and it's possible that that's what causing it; I just don't know.
Can anyone tell me what's causing this and how I can get around it?
Thanks very, very much for any suggestions you can provide.
u cant do a full restore with sprite as what ever it has that makes the prompt will come back, do custom dont add anything but your contacts and messages.
I have a few issues with the Captivate, that I just can't get an answer to, except send it in to Samsung, and we'll repair it. AT&T just does a very poor job, of tech support, on my end of things. I spend hours by phone, poor email replies, and going in for a face-to-face yesterday, simply does no good. I bought the Captivate with Android 2.1, and updated to 2.2, from Samsungs site. My issues are:
AT&T will stop BLOCKING apps, that come from other places, besides their Market. Talk of OTA being pushed, and the Captivate being one of the first to get it, led me to learn that OTA, is not a software push, but a set of instructions, to help us manually change a SETTING in the Captivate. This, from three different tech people, all the way up the ladder at AT&T. That said, the head tech, Glen, COULD NOT FIGURE OUT how to tell me to change the Settings. Another issue, is with SMS and MMS messaging. I can send them no trouble, but I don't really know if the ones I'm sending to, have got them. Surprise. I found I could make requests, for a Notice of Delivery. I just have 'to ASK FOR ONE'. Trouble is, no one can help me figure out how to ask. On AT&T site, under my contract, they have Captivate as my phone. They have a tutorial on MMS settings, so I went to it. I followed the steps they give, and at the END, they show 5 options, that are greyed out, that you can activate. They show 5, but my Captivate only shows 3. The two that are missing, DELIVERY REPORT and READ REPORT, are what I'd need, but they aren't there. Yesterday in a face-to-face, the tech I was talking with, played with a Captivate demo, and actually found those two options on it. His reply, the demo is Android 2.1, I upgraded to 2.2. Conclusion, I screwed myself, with the update. He didn't explain, why the Captivate HE OWNS, and is 2.1 itself, DON'T HAVE THE TWO OPTIONS EITHER. The third issue, is EDGE. Where I live, AT&T's tower, are horrible. No one with AT&T, can connect to them. I pay over $70 a month, to use my Captivate, on my WIFI. My use is rare, for phone calls. It's mainly for the Smart Phone part, that I use it. When I bought the phone, EDGE was not active, but some smart guy at a hugher level, had me make a settings change, and it appeared. But it no longer appears, and it seems if you don't ask a 3G question, they ignore you now. So, after countless failures, I left AT&T yesterday, and stopped at Verizon, just down the road, to get info with them.
I contacted Samsung when I got home, telling them the troubles I'm having, and asking if they could help answer my issues? This morning, I got their reply. The answer was an EITHER/OR reply, and that's why I'm asking this here. They say I could either restore my software to brand new, and lose all my phones content, or send it in for repair, which probably would lose the content with as well. Not an indication, if it's a software(Android) problem, or a hardware problem. No indication if AT&T's OTA, is a software PATCH, or if it really is nothing but instructions on what I need to change. AT&T sent me two MMS TEXTS, while I was on the phone with them, that were 4kb in size, and were ONLY GOOD FOR 4 DAYS, by what was said with them. Both opened with the word, DOWNLOADING, following it, but the word DOWNLOADING, is still present, 2 days later. Must mean what they sent, I never had installed. But why install something, if it's NOT A SOFTWARE ISSUE as AT&T claims, and instead send a simple email with instructions, or a web site, I can read the instructions on? But, as of this morning, I really don't know how to handle this. Does anyone, understand what this means, and can explain in basic English, just what is wrong? Thank you.
All of this is software, stock sucks and now you see why the custom rom community is so large.
For edge, go to settings> wireless and network> mobile networks> network mode, change that to gsm only.
The nonmarket ota will have to be
a software patch because it's disabled completely in the settings of the OS. A simple guide on what to turn on in the settings won't do it it's deeper than that.
the sms/mms issue have you tried clearing the cache and or data in"settings>applications> manage applications>all> messing. Or using a different messaging app? I use handcent sms but there are several in the market.
Thanks. I'm starting to understand this rom craze I've been reading about.
On Edge as you suggested, when I get to Mobile Networks, after I click on it, I see NO Network Mode, that I could change to gsm only. I have 4 choices, Use Packet data, which is active, Data roaming, which is not active, Access point names, which shows ATT WAP, avtive, and Network operators, which shows a blacked out Default Setup. It's listed under Available Networks, but I can't even activate the Default setup. What's missing here?
As for the OTA, I'm glad to know it's as I thought, not as AT&T lied to me about. The two seperate AT&T messages they sent me, a little over two hours apart, are listed as such: <Subject: AT&T
test MMS> Downloading
Message size: 4KB
Expires: 5:57 pm, mAY 23
and when you long press it, a menu appears, that allows you to View message details. Click on that, you get
> Message details
Type: Multimedia message
notification
From: 28838270
Expires: 5:57 PM, May 23
Subject: AT&T test MMS
Message class: Informational
Message aize: 4KB
That is what they tried to push me, as the OTA, and as I said, Glen, an upper level tech, tried walking me through the settings, to physically make the change, but failed to do so. Do you understand what type of crap they were really pushing me?
I do have Handcent sms, but I never used it. I suppose I need to stop thinking everything is alike. I opened it up, and the options, are over whelming, so I chose those I thought were right. I'll read up on it later, to try and understand it better. It showed my text messages I already had, including the two test from AT&T, which actually allowed me to DOWNLOAD. Dowload what? Good question. But clicking it, showed it downloaded, SOMETHING. After that, I tried to install the Amazon appstore app, which AT&T kept blocking, and no surprises, it was blocked again just now. So, maybe AT&T knows what type of crap they sent me, but it damn sure didn't fix the BLOCK.
Guess you see I'm frustrated, but thanks for your reply. If this note helps you try something else, please let me know. Thanks.
MarketEnabler to get past the AT& T blocking (requires root)
IMHO, Custom ROMs is the only way to get the best out of your device.
Sent from my Captivate. Andromeda 3, Onix 2.0.5 @ 1.2Ghz
Downloading?
I've had messages get stuck in downloading when someone sends me a MMS with a picture or a web link that needs to use the data connection to download the message and I have the Data network mode shut off. May want to check you're Data Network setting to see if its on or off. Something to check.
With 2.2 you can turn on or off Data network mode by holding the power button to bringing up the menu.
It seems if I want to stop being frustrated over AT&T and their not helping fix the issues, is to start thinking like a lot of you do. I have seem a lot about ROM, but in truth, don't know much about it. I'll try and read up to learn, just what I'm looking for, like what would best fit my issues. Thinking back on my face to face with Tech support, Friday, when I acted so frustrated, that even they couldn't fix my AT&T BLOCKING of apps NOT FROM THE MARKET, I had two different AT&T TECHS ask me, "WHY DO YOU WANT TO LOAD APPS, THAT ARE NOT FROM THE MARKET"? Why? How about I simply want to? Does that mean that AT&T has the mentality, that since they charge to provide service, that it allows them to DICTATE how we use the equipment we buy? What ever happened to the concept of TRUTH, in business these days? Anyway, I'll start trying to gain ideas from going with a custom rom, and see what woud best meet my needs, with one. Thanks.
You know what's funny?
All of the roms have what you're looking for
That's the entire spirit of roms, I bought this awesome peice if hardware but the software it came with is locked down, freedom robbing, laggy, ugly garbage. The phone belongs to us it's ours to do with what we please.
But before you take the rom leap, try super one click to root and it also unblocks non market apps
I've got this Samsung Focus on AT&T, the other day I decided to force the newest update. I made sure I had all the correct languages and everything. The update went through and most of the phone works. (cellular connection is indeed corruption, and I know about the fix for that.)
Basically what's happening is, the Phone liveTile shows the accumulated missed calls but when I tap on it, the animation freezes then goes back to the homescreen. I can call people through the People app or by using TellMe, and people can call me. I suppose the only thing I can't do is check to see who has called me.
Is this a known issue? Is there a fix? please let me know! as for the backup...
Apparently the backup I did got corrupted in some way, so there's no going back to that (the currently existing back up for some reason is after the update, though I haven't tried using it yet).
restart it. if doesn't work. reset the phone
Yeah, I definitely tried restarting it. I even ran the Samsung tools and that didn't fix anything (including my data issue... I tap on "cellular" in the settings and it doesn't open. ****e.) To modify a classic Bill Gates quote... "I guess that's why they're not shipping 8107 yet."
I think I have an old mango back up from the fall, but oh jeez, that's a lot of backtracking.
I'll keep refreshing this thread to see if any experts have any ideas for a little bit, after a while I'll just reset the phone I guess.
The phone app thing isn't a huge deal at the moment, but no cellular data?! How am I supposed to win arguments without a cellular data connection?
read the thread more carefully, and apply the correct updates - core os update is not enough...just read...please!
Bad update, you need correct language file, i had the same problem on my Titan... Phone live tile, in settings Mobile network etc doesnt work after bad update.
I had the following in my cab sender folder:
- diff-7.10.7720.68-7.10.7740.16-armv7-retail-microsoft.pks_2cb1bfdd82133914239b8ee1a78e61e9000d124a.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0c0a.pks_97df86b81a40df06bb2b15c6739e2ee772e53bbf.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_040c.pks_2d74e8c5f6a835f1fe4c62b488c96ac2d7f01c29.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0407.pks_b50019ef50d52090d408d854c0708ddbf520706c.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0409.pks_bfd9c047a7b27c28208c8a717f8d7511fb2586f1.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0410.pks_9ecf9b052b6cc3161462e998dac8204a0f754556.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.pks_c9b7f3bc5bb340ba30473b566b4557de0cf3322e.cab
Will simple reapplying work perhaps? I mean, I'm pretty sure those are the only ones I needed, I did read the thread quite a few times.
Update reapplied and now it's working!!!!
Now I just need to figure out my internet sharing issue.