I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted
same problem
Hi
I am having the same problem. have you resolved the problem. I would like to see your solution as this is driving me up a wall.
Fibrolan
P.S. I am on the fido network
I have experienced this same issue. I bought a new i616 on the Fido network, upgraded to wm6.1, made a test phone call, and then removed the sim.
While the sim was removed I setup all the software I use (took about a week) and played around with the phone (GPS, etc) to be sure I understood it's capabilities. And then I put the sim card back in - exactly the same issue you have had - it makes and receives calls but there is no sound on any end.
I fixed this by doing a hard reset (with format) - immediately after the format, I tried a test call again and it worked (sound on both ends). I then proceeded to setup the phone again (this time with the sim card still in it) and at the end of installing all the software, the phone still worked.
I have no idea why it stopped working in the first place.
The code you mention does a EEPROM reset which appears to be a carrier unlock on some phones - is your phone now carrier unlocked?
On a side note, the software/hardware on this i616 appears to be a complete train wreck - the GPS sometimes works, sometimes doesnt, sometimes the phone does not allow sound when making phone calls, the bluetooth doesnt connect to some of my devices that have never had any connection issues in the past, etc. These are pretty fundamental issues. I have had a couple of HTC WM phones for the past several years and I have never experienced anything like this with them - perhaps the Jack will grow on me but just setting it up has been a pretty poor experience.
Well, it happened again - no sound on either end during a phone call. I havent done anything since the last rebuild - eventually the sound stopped working.
A full reset with format fixes the problem but I think I have reached the limit - I am not going to rebuild it again because I have no idea when the phone stops working - I do not know what to do differently.
I am going to return this phone for something else - this phone has been remarkably bad (especially for a phone which gets great reviews).
Any ideas what is going on?
same issue
So far the only way to resolve this is the format... rogers says the phone is defective but considering the issue is more than just me I expect a replacement jack is not a guarantee that this issue will go away...
Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan
fibrolan said:
Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan
Click to expand...
Click to collapse
What unlock application are you talking about? Since I fixed the problem myself, I've only had the problem once, which was probably from trying to install a bunch of applications to my phone(which I fixed just by restarting the phone).
The * code that I posted was from the BlackJack II Rogers 6.1 Instructions
I believe he is talking about the application unlock. There are two things I put on my phone that require it - the GPSID thing (connect the GPS to a COM port), and WM5torage (phone looks like a USB drive).
I will format, and will not apply the unlock, and see what happens.
Thanks.
So I've been running into this problem more and more often now. It's seemingly random as to what triggers it. I've tried pulling the battery..turning it on and off..nothing seems to work. I don't really want to do a full format because I don't want to lose all my stuff on there.
I've also found out even with a bluetooth headset, I can't hear anything..I also can't hear anything if I plug in the headset that comes with the phone.
Hopefully we can find out a solution as to why it does this.
Ah so I am not alone.
My fido jack on 6.1 that is also application unlocked (Some of my apps do require this to be done, one way or another..) is doing the same thing. Sometimes I just have to reboot a few times in a row and it comes back, but as of this morhning I've done it 3-4 times and still no sound.
I have given up. I have decided not to app unlock the phone - it is the only way to guarantee the phone still functions as a phone and I have tried many, many things to get it to work. This definitely limits the capabilities of this phone.
This phone is a disaster - the GPS does not connect through a com port like almost every other GPS device on the market, not all of my bluetooth devices work with the phone, and if you app unlock it, it stops working as a phone.
I like the scroll wheel though.
any progress on this?
i have same issue:
-i616 (fido/roger jack)
-want to get GPS working
-but app unlocker will break sound (no sound during calls) on WM6.1
i think the unlockers are only for i617 blackjack2, but not for the canadian version...
any ideas???
I am still trying to figure out the root cause of this problem. Yesterday it happened again to me so I pulled out the battery, removed the sim card, and then reinstalled everything and it worked - no hard reset required. It hasnt happened since so I havent tried the sim card removal again, so it could just be a fluke.
But, if it does turn out to be sim card related, is it possible we are using older version sim cards? The phone came with a new one but I just stuck to using my older one. What abaout everyone else - new or old sim card?
Thanks.
I also have the samsung jack (fido) i616 and also cannot hear the calls on both ends on occasions...even prior to app unlocking so it may not be the app unlock that is causing the issue.
I would turn off and on the phone and it would work again.
Is there a permanent solution to resolve this?
Thanks in advance
Samsung Jack i616 - Can't Hear Calls - Callers can't hear me
I was scanning the xda-developer site as I have both a TytN II and a BJII and thought do I bother telling my story or not - I figured if I can save someone else the hassle, the Major headaches, the time and the Expense it is worth it. So hear goes, get a coffee and put your feet up as this is a long story. If you just wanna know the outcome and solution skip to the end..otherwise just settling in for the story.
Like many of you I bought an BJII from a well known Chinese Mall(PM) and at the same time got it unlocked. I got the phone home and immediately upgraded it to the Fido WM6.1 official rom as I had been using 6.1 on my Tytn II forever without any major headaches. This was my first mistake. (actually my 2nd the first was buying the dam phone in the first place). Right after the upgrade, after making a call, the caller could not hear me and I could not hear them. Only a Hard reset(HR) fixed the problem. After the reset, I then proceed to install some smartphone apps, (sda application unlock, MoDaco smartphoneGpsActivator, MS smartphone GPSID, Garmin Mobile XT etc) after installing my seventh app I decided to make another test call. I encountered the same problem, so I set about uninstalling one app at a time to see which one was the culprit. This did not work and only a HR would fix the problem. This nonsense installing, hard reseting went on for about a week.
Frustrated I took the BJII back to PM, but the dude did not want to give me my money back - he claimed because I had upgraded to 6.1 any software upgrades regardless of whether it was an official rom or not was not covered under warranty. At this point I was not sure whether I was facing a software issue or a hardware issue. Anyway, I took the phone home, and this nonsense with the phone and calls went on for weeks. The last straw for me was being in the mall with my wife and she's calling me and I did not hear the phone ring. Was she mad or what? So to prove I was not dodging her and eying up the babes I got her to call me while I had the phone in my hand and sure enough the phone was ringing, but there was no sound. We did this 4 times- I switched the phone on & off each time - so another HR - problem goes away.
I am Hugely frustrated by this point , however, I set about reinstalling my apps - as a side note one of the apps that I wanted to install was SPB backup 2 - BJII didn't like it so I could not use it hence having to reinstall each app everytime 1 by 1 after a HR. Anyway, this demon possessed phone would at least 3 times a week need to be HR. I was so frustrated that I decided to try the At&t rom,(Mistake #2) it crashed in the middle of the upgrade and bricked the phone. It would not turn on period. Now before you start, I am not a newbie, I have been messing around with windows smartphones and pocketpc for years - in fact my first pocketpc was a compact and it was grey scale, my first ever pda was a Psion, so I know how to flash phones, and cook my own roms.
Anyway, I took it back to PM and the dude wanted to charge me $150 bucks to fix it. I walked out the shop and tried another vendor he said that he would reflash it for $50. He had the BJII for 3 days and in the end could not fix it.
I took the BJII back to the original guy, I tell you I am a pacifist but I am ready to kill at this point and we almost get into a fight as I was wholly convinced at this point that it was a hardware issue. He refused to send it back to Samsung as he reckoned they would charge me an arm and a leg to fix it as they would know straight away that this was a software flash that went wrong. In the end he said that he could fix it for $80 bucks- given that I wanted this phone and I wanted it working(it is great for messaging) I said fine. Yes he did get it working, but had to install a new logic board(motherboard). Thankfully he also installed WM6.0. I decided to leave well alone this time and just install my apps. I have had the phone back for 2 weeks now and have been using it everyday and have had none of those call or sound issues.
I suspect that there is a serious problem with the 6.1 upgrade and it has nothing to do with application unlocking the phone or any other 3rd party software. No presenting any keys in any combination is going to magically fixed this call issue - so please don't be fooled. My advice if you want it, is to Not upgrade to 6.1 at all. WM 6.1 offers some nice features, but not enough to go through this amount of headache, frustration and money.
Anyway peeps Happy New Year.
And avoid WM6.1.
Smartb
Smartb - I liked the story despite the fact that I cried more than I laughed. Seriously, I couldn't agree more with you. Indeed this 6.1 upgrade is the cause of our pain. I've spent hours doing the same thing you have less the ROM installs.. Mine came with the Rogers 6.1 ROM installed.
I'm at a loss for what to do. My latest venture is to compare registry settings with a HR image and after installing a software that breaks the phone. The software I tested with that always broke the phone was SPB Wireless Monitor..
I could ALMOST live with the issue if SPB Backup worked. But of course, it breaks the phone too!
So far, I've successfully gotten these softwares installed without the phone breaking:
- MS GPSID
- TCPMP + FLV Plugin
- Activesync with Exchange
- Garmin Mobile XT
- Facade 1.4.0
- CHome Configurator
These break the phone:
- SPB Backup
- SPB Wireless Monitor
- SDA Unlock
Any ideas how I could downgrade to WM 6.0? My phone came pre-installed with WM6.1
Dave, I don't think you can because there is no 6.0 rom floating about out there believe me I tried. I spent hours looking for one and couldn't find any. There were other roms for the 607, but I wouldn't risk using those. Sorry Mate.
Smartb.
Rogers is sending me the 6th refurbished Samsung Jack
I am having the same audio problem described here. Hard reset, which is every "tech support agent's" answer to everything, is NOT NECESSARY.
I have popped the battery out and stuck it back in and this has worked, other times it has not.
I have turned the phone off and on again and this has worked, other times it has not.
Rogers is sending me the 6TH REPLACEMENT Refurbished phone I have received, I may ask them to start sending 2 at a time, just to be sure.
They won't allow a hardware switch, they will only replace the phone with the same phone. They will try to get me to take a hardware upgrade though for like $200.00 and make me agree to 3 more years.
I am only hoping that the next refurbished one I receive will have this 6.1 bug fixed.
Here's my take on this...
Had this problem from pretty much day 1 with the i616 from Fido, it would occur randomly and intermittently (I could go 3 weeks without experiencing it). But about 2-3 weeks ago, it seemed to be stuck like this, switched to my nokia phone, called fido and they sent a replacement. In the meatime looked for something to backup the current phone to transfer everything to the replacement. That ended up being sprite backup.
Got new phone, made some calls it worked fine. Backed up old phone with sprite and restored to new phone. New phone now has same problem. Start uninstalling, no joy, eventually wipe clean, try restoring again, same problem, wipe clean, install a few of my apps, works fine for a few days, then same problem. Uninstall all 3rd party apps except SK Tools Standard, audio works again.
Wipe device install only a few apps, working fine, this morning I install sprite backup and audio goes away, uninstall sprite audio comes back...
Next send message to sprite support as follows, we'll see what they have to say, next step would be to backup, then wipe and only install sprite and see if problem reoccurs or whether it's an interaction with one of the apps below.
Samung Jack SGH-i616 (aka BlackJack II) running windows mobile standard 6.1, call audio stops after installing sprite 6.5.4.8. This consistently happens when installed and problem goes away once uninstalled.
It's a manifestation of this problem
http://forum.xda-developers.com/showthread.php?t=439620
The following other software is installed on the device.
Webis Flexmail 4.1 beta (bulld 3317)
Webis Pocket Informant 8.52 beta (build 2339)
(note problem occurs with non beta versions of both apps)
Sk Tools Standard 3.3.3.1
Synthesis SyncML Pro 3.0.2.22
Total Commandder/CE 2.51
The rest are the standard apps that ship with the device in rom.
Unicornasaurus said:
I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted
Click to expand...
Click to collapse
I didn't use my brain before typing this code. This code effectively hard reset my phone!!! no warnings or anything.
For some time now, I've been having a problem with my Touch Pro. Some time ago, (about a 2 months or so) I have been recieving harassing texts and from "Unknown Sender" or "1234". Where the texts come from isnt so much the issue, the issue is that whomever is sending the texts can see any text messages I send; my call log; my emails and any picture mail in my phone. I've also been told that voicemails have been forwarded to other people even before I hear them. Im sure its like a vendictive ex girlfriend or a friend of theres of something...but I cant figure out how to stop it.
I havent called Sprint, I have master reset my phone and restored my backed up data, and then it started up again. I havent left my phone around anyone, or taken it to a sprint store ever for repairs or anything...so...I just cant figure it out.
If anyone has any suggestions of where this might be coming from or how to stop it, I would greatly appreciate it. Im thinking of getting a new phone or switching carriers...
Thanks.
Possibly someone has cloned your SIM-card.
SIM card cloning is by the way not very easy, but still possible.
When so, the only way around it, is to have the current one blocked and buy a new one.
More inf: http://en.wikipedia.org/wiki/SIM_cloning
you may find this interesting http://forum.xda-developers.com/showthread.php?p=3998052
may be your ex or somebody installed phone creeper on your phone!
try to flash your ROM... and dont restore your data for a few days and see if the same things happen
hope this will help
Yeah, it sounds an awful lot like someone slapped you with creeper. You can hard reset, but not restore, and see if the problems go away. Or check the \windows\startup folder, and see if the creeper startup link is there (not sure what it's called-that thread is too long, lol). Or, use sk tools to see what runs at startup, and disable creeper or whatever it's called on the the device.
Of course, if you figure out that it is creeper, and you know who did it, you may want to see if you can have a little fun at their expense before disabling it. That's definitely the way that I would go.
How can I disable Sprint hands-free-activation after boot??
every time I boot ot hard reset I get this message of trying to activate then fail
how can I stop this from starting
thanks
What exactly is sprint hands free activation? I'm on sprint & I've never heard of this. But check your startup folder & see if that program is in there.
Hi,
Same thing here. I bought an unlocked sprint phone. I'm using it on another carrier. Each time I make a soft reset it boots up, starts Flow 3D, and then launches a screen with the title Sprint hands-free-activation.
Because I am on another carrier it can't connect, so after a minute or so, it displays an error message, with the instruction that if you want to reattempt connection you should go to All settings => System => Update Profile
In my startup folder I got the following items:
\Windows\BTTrayCE.exe
\Windows\HTCStartUp.exe
\Program Files\S2U2\iLock2.exe
\Windows\PKG.exe
poutlook.exe
\windows\voicecmd.exe
Any ideas? Thank you in advance!
Sorry for bumping a really old thread here, but I'm having troubles with this as well. Any ideas?
Thanks.
- 2 Bunny
ACTIVATION Reply
Any new updates on this?
- 2 Bunny
ANY UPDATES ON THIS QUESTION Reply
Any updates on this?
- 2 Bunny
This came up for the first time for me last week. My phone kept on rebooting and then attempting "hands free activation". Eventually my phone told me that it had attempted too many times and that I needed to do hard reset it. I am using the stock wm 6.5 with sense and had not installed any new apps in months. It started while driving and using google maps. If I hit "cancel" while hands free activation is attempting i am able to regain control of my phone but it was sluggish. I was not able to find a fix and eventually I hard reset my phone and the problem went away.
I had this problem after I provisioned my Telus phone using the Sprint setting by accident after flashing a custom rom.
After a bunch of searching I found that going into the registry and deleting HKLM\Services\LaunchOMC the pop up never came back again.
I don't know if it has any adverse effects if you are actually on the Sprint network but it worked for me anyways.
Other then that the only thing I found that would fix the problem is a hard reset.
Here's the threads that pointed me in the right direction.
http://forum.ppcgeeks.com/htc-touch-pro/50148-touch-pro-services-guide.html
http://forum.ppcgeeks.com/htc-touch-pro-2/85027-please-help-explain-build-database-services-apps-auto-run-tp2s.html
PROBLEM SOLVED HOORAY Reply
frank0 said:
This came up for the first time for me last week. My phone kept on rebooting and then attempting "hands free activation". Eventually my phone told me that it had attempted too many times and that I needed to do hard reset it. I am using the stock wm 6.5 with sense and had not installed any new apps in months. It started while driving and using google maps. If I hit "cancel" while hands free activation is attempting i am able to regain control of my phone but it was sluggish. I was not able to find a fix and eventually I hard reset my phone and the problem went away.
Click to expand...
Click to collapse
Ironically, a hard reset never fixed it for me. I have thought that it might be because I am on Boost Mobile and my configuration and information might be a bit different.
trevoroni said:
I had this problem after I provisioned my Telus phone using the Sprint setting by accident after flashing a custom rom.
After a bunch of searching I found that going into the registry and deleting HKLM\Services\LaunchOMC the pop up never came back again.
I don't know if it has any adverse effects if you are actually on the Sprint network but it worked for me anyways.
Other then that the only thing I found that would fix the problem is a hard reset.
Here's the threads that pointed me in the right direction.
http://forum.ppcgeeks.com/htc-touch-pro/50148-touch-pro-services-guide.html
http://forum.ppcgeeks.com/htc-touch-pro-2/85027-please-help-explain-build-database-services-apps-auto-run-tp2s.html
Click to expand...
Click to collapse
I probably should've told ya'all this last week, but I might have found a fix for the problem: In Caulkin's/OMJ's/OAT's Kitchen, uncheck "carrier - sprint", and select the "Carrier - Generic" instead. I've been running for the last few days now like that and have had zero problems with this, and I think I have finally escaped the elusive "hand free activation problem. And no, this is not an April first joke either.
- 2 Bunny
frank0 said:
This came up for the first time for me last week. My phone kept on rebooting and then attempting "hands free activation". Eventually my phone told me that it had attempted too many times and that I needed to do hard reset it. I am using the stock wm 6.5 with sense and had not installed any new apps in months. It started while driving and using google maps. If I hit "cancel" while hands free activation is attempting i am able to regain control of my phone but it was sluggish. I was not able to find a fix and eventually I hard reset my phone and the problem went away.
Click to expand...
Click to collapse
Same problems here. Sprint cdma touch pro 2 with stock ROM.
I would find the phone keeps shutting itself off.
Finally able to do backup of contacts and hard reset. Restore contacts and lost all my text messages. Also lost all addresses with-in the contacts.
Hopefully this last.
GOOD LUCK Reply
newuser02 said:
Same problems here. Sprint cdma touch pro 2 with stock ROM.
I would find the phone keeps shutting itself off.
Finally able to do backup of contacts and hard reset. Restore contacts and lost all my text messages. Also lost all addresses with-in the contacts.
Hopefully this last.
Click to expand...
Click to collapse
If a hard reset doesn't help, you'll need to try to either make that adjustment in the kitchen that I was talking about earlier, or try that registry tweak. I've flashed more ROMs that I had cared to have counted to my Diamond (the equivalent of a hard reset every time), and it never fixed it for me. Hopefully you have better luck though.
- 2 Bunny
probably you intrested this way (visit page 3)
error data
Disabling Hands-Free Avctivation on HTC TP2 Sprint.
Note: Attached Cabinet files must be used accordingly!!!
1)Windows Mobile 6.1 use the cabinet file marked 6.1...
2)Windows Mobi le 6.5 use the cabinet file marked 6.5...
***Let me know if these Cabs resolved the proble!
"ALEXANDER OF PERSIA"
This is my first post. I am not a programer, well not for 30 years and not since my backups were on a tape, but am fairly good at fixing my own issues with the help of this site, which much of is way over my head. I have don't everything in every thread that I can find here and have some more information that might help everyone figure out this issue.
Phone is a non-rooted EVO 4G lte. Screen captures below should give you all the specifics that you need. If you need more info, please email me!
I get a break from error after I delete contact info/cache from both Contact Storage and People (contacts) apps.
I started having the problem a few days ago and the last three things I installed were:
Adobe Flash (got it from this site and have now disabled and would like to totally remove if any of you know how to do that. There is not option in the settings/apps/adobe to uninstall, just disable.
Skype which I have removed.
2012/3 Live Wall Paper, also removed
I have reset the phone, unmounted and remounted the SD card, moved programs that use contacts from SD card back to phone storage and as I said removed all contacts, disabled Smooth sync for the cloud and the JB workaround and still after all most of the contacts are resynced form Google, the error starts to appear. It doesn't lock up my phone, but occasionally crashes app that I am working in. ROYAL PAIN.
So in short, 1. How can I totally get rid of Flash?
2. Is there someway to do a repair on my contact database without rooting phone
3. There is java mentioned in the error message, I didn't think Droid used java (see how little I really know, so be nice) is there a way to update that service?
4. Other than a hard reset AGAIN, what can I do! (Or after all this would that work this time? I hate going to all that effort and still have same issues) Is there a way to force a reinstall of JB?
I realize that I know just enough to be dangerous, but can follow detailed direction to fix this. I go through way too many phone to root my current phone and take the chance that Sprint wouldn't replace it. I never have a phone last more than a year! And the last quarter of of 2012 I went through 5 phones. Galaxy Nexus didn't like me!
Thanks for the great site and in advance for taking the time to read all of this.
More Info
I have also been deactivating Facebook and that wasn't helping, but many people were saying that was an issue.
Those of us that just started having this issue think it might be a date issue. Is here anything that could do this if someone's b'day is the 29th of February?
I have one of those people and that seems like a strange issue, but heck, humans programs this stuff so I guess anything is possible! It makes sense that a value in a contact field is causing the issue, but a date that only exists every 4 years?
I have not had the error since i fixed this, BUT only about 500 of my 2,500 contacts are installed and I have yet to re enable facebook.
Thanks again!
Pat
Hi,
Yesterday I set a fingerprint lock on my S7. It prompted me to enter a backup password and some other password, both with different requirements (one only had to be 4 letters, one was longer and had a number) and the longer one had to be confirmed whereas the shorter one did not. I set this up and tested it a few times, everything seemed to work great. Later I let my phone idle and it turned the screen off on its own for the first time, ever since then the phone has not been able to recognize my fingerprint. It doesn't even say "No match", it just acts like I'm not even putting a finger on it at all.
Tried over and over and eventually tried the backup password, which for some reason is the shorter one without a number. I put in what I am absolutely sure I put in, and it wouldn't take it. Tried a couple more times, even got so desperate as to emulate potential typing errors I might have made (since no confirmation for that password) and nothing worked.
Eventually I hit the timed lockout and I had to stop trying things then. So I went online and searched and discovered Google's Android Device Manager. I heard that if you lock the phone with it you can unlock it through the same manager and the phone will be unlocked. First thing that was odd was that ADM didn't give me an option to enter a password, just a contact message and phone number. I still put in a message and hit lock, and... nothing changed on ADM at all.
Now my phone shows the stupid message every time I wake it up and every few seconds on the lock screen (I can still attempt to unlock the phone with the password and use phone/camera though), but ADM doesn't even give an option to unlock, just change the locked message. I can't even get rid of the damn lock by changing it to blank. I heard Samsung offers a similar service but I never made a Samsung account and apparently one is required to use it.
Beyond that the only solution I've found is wiping the phone (which I can easily do, because there's an option in ADM for it which presumably works), which I really don't want to do since I have a lot of pictures and data on the phone that aren't backed up that I would absolutely hate to lose.
To make things worse it appears that this issue is specific to my phone/the S7/Samsung phones/something, as I have my old Nexus 4 listed in ADM as well and going through the options for it I see it has the ability to define a password, but no such thing for the S7. I really have no clue where to go from here, tons of googling hasn't found me any method I haven't already tried or can't do.
I'd be so grateful if someone here would at the very least find a way for me to recover data before wiping it to get rid of the lock.