Database Info

[Q] Samsung Jack i616 - Can't Hear Calls - Callers can't hear me

I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted

same problem
Hi
I am having the same problem. have you resolved the problem. I would like to see your solution as this is driving me up a wall.
Fibrolan
P.S. I am on the fido network

I have experienced this same issue. I bought a new i616 on the Fido network, upgraded to wm6.1, made a test phone call, and then removed the sim.
While the sim was removed I setup all the software I use (took about a week) and played around with the phone (GPS, etc) to be sure I understood it's capabilities. And then I put the sim card back in - exactly the same issue you have had - it makes and receives calls but there is no sound on any end.
I fixed this by doing a hard reset (with format) - immediately after the format, I tried a test call again and it worked (sound on both ends). I then proceeded to setup the phone again (this time with the sim card still in it) and at the end of installing all the software, the phone still worked.
I have no idea why it stopped working in the first place.
The code you mention does a EEPROM reset which appears to be a carrier unlock on some phones - is your phone now carrier unlocked?
On a side note, the software/hardware on this i616 appears to be a complete train wreck - the GPS sometimes works, sometimes doesnt, sometimes the phone does not allow sound when making phone calls, the bluetooth doesnt connect to some of my devices that have never had any connection issues in the past, etc. These are pretty fundamental issues. I have had a couple of HTC WM phones for the past several years and I have never experienced anything like this with them - perhaps the Jack will grow on me but just setting it up has been a pretty poor experience.

Well, it happened again - no sound on either end during a phone call. I havent done anything since the last rebuild - eventually the sound stopped working.
A full reset with format fixes the problem but I think I have reached the limit - I am not going to rebuild it again because I have no idea when the phone stops working - I do not know what to do differently.
I am going to return this phone for something else - this phone has been remarkably bad (especially for a phone which gets great reviews).
Any ideas what is going on?

same issue
So far the only way to resolve this is the format... rogers says the phone is defective but considering the issue is more than just me I expect a replacement jack is not a guarantee that this issue will go away...

Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan

fibrolan said:
Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan
Click to expand...
Click to collapse
What unlock application are you talking about? Since I fixed the problem myself, I've only had the problem once, which was probably from trying to install a bunch of applications to my phone(which I fixed just by restarting the phone).
The * code that I posted was from the BlackJack II Rogers 6.1 Instructions

I believe he is talking about the application unlock. There are two things I put on my phone that require it - the GPSID thing (connect the GPS to a COM port), and WM5torage (phone looks like a USB drive).
I will format, and will not apply the unlock, and see what happens.
Thanks.

So I've been running into this problem more and more often now. It's seemingly random as to what triggers it. I've tried pulling the battery..turning it on and off..nothing seems to work. I don't really want to do a full format because I don't want to lose all my stuff on there.
I've also found out even with a bluetooth headset, I can't hear anything..I also can't hear anything if I plug in the headset that comes with the phone.
Hopefully we can find out a solution as to why it does this.

Ah so I am not alone.
My fido jack on 6.1 that is also application unlocked (Some of my apps do require this to be done, one way or another..) is doing the same thing. Sometimes I just have to reboot a few times in a row and it comes back, but as of this morhning I've done it 3-4 times and still no sound.

I have given up. I have decided not to app unlock the phone - it is the only way to guarantee the phone still functions as a phone and I have tried many, many things to get it to work. This definitely limits the capabilities of this phone.
This phone is a disaster - the GPS does not connect through a com port like almost every other GPS device on the market, not all of my bluetooth devices work with the phone, and if you app unlock it, it stops working as a phone.
I like the scroll wheel though.

any progress on this?
i have same issue:
-i616 (fido/roger jack)
-want to get GPS working
-but app unlocker will break sound (no sound during calls) on WM6.1
i think the unlockers are only for i617 blackjack2, but not for the canadian version...
any ideas???

I am still trying to figure out the root cause of this problem. Yesterday it happened again to me so I pulled out the battery, removed the sim card, and then reinstalled everything and it worked - no hard reset required. It hasnt happened since so I havent tried the sim card removal again, so it could just be a fluke.
But, if it does turn out to be sim card related, is it possible we are using older version sim cards? The phone came with a new one but I just stuck to using my older one. What abaout everyone else - new or old sim card?
Thanks.

I also have the samsung jack (fido) i616 and also cannot hear the calls on both ends on occasions...even prior to app unlocking so it may not be the app unlock that is causing the issue.
I would turn off and on the phone and it would work again.
Is there a permanent solution to resolve this?
Thanks in advance

Samsung Jack i616 - Can't Hear Calls - Callers can't hear me
I was scanning the xda-developer site as I have both a TytN II and a BJII and thought do I bother telling my story or not - I figured if I can save someone else the hassle, the Major headaches, the time and the Expense it is worth it. So hear goes, get a coffee and put your feet up as this is a long story. If you just wanna know the outcome and solution skip to the end..otherwise just settling in for the story.
Like many of you I bought an BJII from a well known Chinese Mall(PM) and at the same time got it unlocked. I got the phone home and immediately upgraded it to the Fido WM6.1 official rom as I had been using 6.1 on my Tytn II forever without any major headaches. This was my first mistake. (actually my 2nd the first was buying the dam phone in the first place). Right after the upgrade, after making a call, the caller could not hear me and I could not hear them. Only a Hard reset(HR) fixed the problem. After the reset, I then proceed to install some smartphone apps, (sda application unlock, MoDaco smartphoneGpsActivator, MS smartphone GPSID, Garmin Mobile XT etc) after installing my seventh app I decided to make another test call. I encountered the same problem, so I set about uninstalling one app at a time to see which one was the culprit. This did not work and only a HR would fix the problem. This nonsense installing, hard reseting went on for about a week.
Frustrated I took the BJII back to PM, but the dude did not want to give me my money back - he claimed because I had upgraded to 6.1 any software upgrades regardless of whether it was an official rom or not was not covered under warranty. At this point I was not sure whether I was facing a software issue or a hardware issue. Anyway, I took the phone home, and this nonsense with the phone and calls went on for weeks. The last straw for me was being in the mall with my wife and she's calling me and I did not hear the phone ring. Was she mad or what? So to prove I was not dodging her and eying up the babes I got her to call me while I had the phone in my hand and sure enough the phone was ringing, but there was no sound. We did this 4 times- I switched the phone on & off each time - so another HR - problem goes away.
I am Hugely frustrated by this point , however, I set about reinstalling my apps - as a side note one of the apps that I wanted to install was SPB backup 2 - BJII didn't like it so I could not use it hence having to reinstall each app everytime 1 by 1 after a HR. Anyway, this demon possessed phone would at least 3 times a week need to be HR. I was so frustrated that I decided to try the At&t rom,(Mistake #2) it crashed in the middle of the upgrade and bricked the phone. It would not turn on period. Now before you start, I am not a newbie, I have been messing around with windows smartphones and pocketpc for years - in fact my first pocketpc was a compact and it was grey scale, my first ever pda was a Psion, so I know how to flash phones, and cook my own roms.
Anyway, I took it back to PM and the dude wanted to charge me $150 bucks to fix it. I walked out the shop and tried another vendor he said that he would reflash it for $50. He had the BJII for 3 days and in the end could not fix it.
I took the BJII back to the original guy, I tell you I am a pacifist but I am ready to kill at this point and we almost get into a fight as I was wholly convinced at this point that it was a hardware issue. He refused to send it back to Samsung as he reckoned they would charge me an arm and a leg to fix it as they would know straight away that this was a software flash that went wrong. In the end he said that he could fix it for $80 bucks- given that I wanted this phone and I wanted it working(it is great for messaging) I said fine. Yes he did get it working, but had to install a new logic board(motherboard). Thankfully he also installed WM6.0. I decided to leave well alone this time and just install my apps. I have had the phone back for 2 weeks now and have been using it everyday and have had none of those call or sound issues.
I suspect that there is a serious problem with the 6.1 upgrade and it has nothing to do with application unlocking the phone or any other 3rd party software. No presenting any keys in any combination is going to magically fixed this call issue - so please don't be fooled. My advice if you want it, is to Not upgrade to 6.1 at all. WM 6.1 offers some nice features, but not enough to go through this amount of headache, frustration and money.
Anyway peeps Happy New Year.
And avoid WM6.1.
Smartb

Smartb - I liked the story despite the fact that I cried more than I laughed. Seriously, I couldn't agree more with you. Indeed this 6.1 upgrade is the cause of our pain. I've spent hours doing the same thing you have less the ROM installs.. Mine came with the Rogers 6.1 ROM installed.
I'm at a loss for what to do. My latest venture is to compare registry settings with a HR image and after installing a software that breaks the phone. The software I tested with that always broke the phone was SPB Wireless Monitor..
I could ALMOST live with the issue if SPB Backup worked. But of course, it breaks the phone too!
So far, I've successfully gotten these softwares installed without the phone breaking:
- MS GPSID
- TCPMP + FLV Plugin
- Activesync with Exchange
- Garmin Mobile XT
- Facade 1.4.0
- CHome Configurator
These break the phone:
- SPB Backup
- SPB Wireless Monitor
- SDA Unlock
Any ideas how I could downgrade to WM 6.0? My phone came pre-installed with WM6.1

Dave, I don't think you can because there is no 6.0 rom floating about out there believe me I tried. I spent hours looking for one and couldn't find any. There were other roms for the 607, but I wouldn't risk using those. Sorry Mate.
Smartb.

Rogers is sending me the 6th refurbished Samsung Jack
I am having the same audio problem described here. Hard reset, which is every "tech support agent's" answer to everything, is NOT NECESSARY.
I have popped the battery out and stuck it back in and this has worked, other times it has not.
I have turned the phone off and on again and this has worked, other times it has not.
Rogers is sending me the 6TH REPLACEMENT Refurbished phone I have received, I may ask them to start sending 2 at a time, just to be sure.
They won't allow a hardware switch, they will only replace the phone with the same phone. They will try to get me to take a hardware upgrade though for like $200.00 and make me agree to 3 more years.
I am only hoping that the next refurbished one I receive will have this 6.1 bug fixed.

Here's my take on this...
Had this problem from pretty much day 1 with the i616 from Fido, it would occur randomly and intermittently (I could go 3 weeks without experiencing it). But about 2-3 weeks ago, it seemed to be stuck like this, switched to my nokia phone, called fido and they sent a replacement. In the meatime looked for something to backup the current phone to transfer everything to the replacement. That ended up being sprite backup.
Got new phone, made some calls it worked fine. Backed up old phone with sprite and restored to new phone. New phone now has same problem. Start uninstalling, no joy, eventually wipe clean, try restoring again, same problem, wipe clean, install a few of my apps, works fine for a few days, then same problem. Uninstall all 3rd party apps except SK Tools Standard, audio works again.
Wipe device install only a few apps, working fine, this morning I install sprite backup and audio goes away, uninstall sprite audio comes back...
Next send message to sprite support as follows, we'll see what they have to say, next step would be to backup, then wipe and only install sprite and see if problem reoccurs or whether it's an interaction with one of the apps below.
Samung Jack SGH-i616 (aka BlackJack II) running windows mobile standard 6.1, call audio stops after installing sprite 6.5.4.8. This consistently happens when installed and problem goes away once uninstalled.
It's a manifestation of this problem
http://forum.xda-developers.com/showthread.php?t=439620
The following other software is installed on the device.
Webis Flexmail 4.1 beta (bulld 3317)
Webis Pocket Informant 8.52 beta (build 2339)
(note problem occurs with non beta versions of both apps)
Sk Tools Standard 3.3.3.1
Synthesis SyncML Pro 3.0.2.22
Total Commandder/CE 2.51
The rest are the standard apps that ship with the device in rom.

Unicornasaurus said:
I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted
Click to expand...
Click to collapse
I didn't use my brain before typing this code. This code effectively hard reset my phone!!! no warnings or anything.

WM6.1 - I'm asked for a password, but I don't have one!

Hello.
I recently got a Sony Ericsson XPERIA X1 (with Windows Mobile 6.1), and I set a password on it.
Sometimes when it would ask me for my password, the shift or fn keys wouldn't work, so I couldn't enter it. I would have to soft reset the device to be able to type in my password.
Frustrated, I decided to disable password protection entirely. I then found that after leaving the device alone for a period of time (while sleeping, for example), it would lock and ask me for a password - but since I no longer had one, I couldn't. I would have to soft reset the device to bypass the password screen.
I searched around, and found that this was a bug in Windows Mobile, and the only solution was to hard reset and never enable password protection. After a while of putting up with it, I flashed my device to use itje's Touch-IT v7, and I performed a hard reset. It was fine for a while, but now it's doing it again: it's asking me for a password when I leave it alone for a period of time, but I don't have one. I never set a password this time.
Is there any real solution to this? It's incredibly frustrating. Thank you in advance.

you mean the security password that is enforced when using exchange email? there is ap app that will enable you to turn it off, but you should read this thread (the app is listed here but you should take heed of the warning from deedee). I leave it up to you.
http://forum.xda-developers.com/showthread.php?t=358695

Try "hard reseting" it

I'm not using Exchange email, and the checkbox to disable password protection isn't greyed out (like it is in that thread). Thanks for the link anyway though, I'll have a look around the registry.
Anyone else know anything about this?
Edit: As I said in my original post, I already tried a hard reset when this problem originally appeared. I hadn't touched the password protection settings at all since my hard reset, but it's happening again.

Does nobody have a solution for this?

are you sure someone isn't messing with your phone and setting a password? I've been using windows mobile for 6 years and never had that problem.
And you said something about a bug.... can you link me to whatever you found?

Thanks for the reply, I appreciate it.
I just tried searching for that again, but unfortunately I can't find it. It was a thread with somebody saying that they have no password set, yet the device asks for one so they can only bypass the screen by soft resetting - and that's the exact problem I'm having now. There was no solution posted so I didn't bookmark it or anything.
I am the only person that has had access to my phone, so nobody has messed with it. The password setting is definitely disabled, and the HKLM\Security\Policies\Policies\00001023 registry value is set to 1 (disabled). My phone doesn't ask me for a password when I first start it (so I can get past it each time via a soft reset), it just seems to happen after 10 hours or so - I'm not exactly sure what triggers it.
Edit: I'm not sure if this is what I read before, but it seems to describe the same thing.
http://forum.xda-developers.com/showthread.php?t=291567
nuclear said:
Thats the question: is it really time for WM6?
So far i believe that the device cannot digest what we have so far of WM6. Too many non-functional things or bugs if you would like to say =_=
Device auto-locks and asks for password and if you dont have a password you cannot get into the device other than by soft reset. Asks password even for activesync! PDAViet has problem with activesync in vista as it disconnects after 5 minutes. WiFi only turns on from Comm center. Hang up's on 25MB free RAM. A lot of memory leak! 10MB to run SPB Time -_-...
Click to expand...
Click to collapse
Edit 2: Here's another one... No real solution posted.
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/88834ba5-b64a-45c3-8dc4-378ffc3a40d6
seckin38 said:
I have recently purchased HTC Touch with WM6. 2 days ago, it suddenly locked. I couldn't unlock because it asks for password. Because I didn't set a password, I couldn't unlock.
Click to expand...
Click to collapse

This is really wierd, i have been using wm since 5 was on the scene and ive never come across your issue. I appreciate that your not using exchange but did you try the zeynee unlock app? It might stop the lock screen, you never know. If it doesnt work then nothing lost huh??

I didn't try it, no. I was concerned about the posts saying the application used up too much battery power, and thought checking the registry would be good enough (since nothing should be changing the value). I'll install it now and see if the problem still occurs. I don't have much hope that this will help though.

Okay, it just happened again. The application didn't help.

Ok, worth a try...
Have yoyu considered flashing to a different rom to see if this works? Is there a new stock Rom available?
Ill have to look more into this, maybe msdn has something on it.

Well, I had this problem with both my original Vodafone ROM and the custom one I'm using now. I'm reluctant to flash it again due to the hassle of reinstalling everything again.
I think it may be related to notifications. It just happened again as I got a text message, and last time it happened just before I received a Skype call. When I'm away and come back to find it locked, there tends to be a new icon in the notification area. It definitely doesn't happen every time I get a notification though...

2 great programs I downloaded for the Sprint Touch Pro2

Hi guys!
Was poking around online, and found this page: http://www.phonedog.com/cell-phone-research/blog/part-1-guide-to-windows-mobile.aspx . It lists a few great programs (many of which have been developed by you folx here at xda). There are two phenomenal ones that work quite well on my TP2.
The first is the SD card tuneup. I don't know why, but it seems to make my WHOLE PHONE go faster. I love it.
The second is the advanced configuration utility. A great way to access tons of settings to better tweak your phone.
Hope it helps you guys as much as it does me.

Warning for verizon users
Be very careful here and learn from my mistake. I did the reg edit from the linked page for increasing the threaded sms space. I copied the file over to my PC, made the edit, pasted back and reset. When I went into text messages and clicked "all messages" it wouldn't open. I hit reply and it wouldn't open. They only way I could send a text was either from favorites or contacts. I still had the original file so I pasted it back reset but but still f'ed up. I finally had to hard reset to fix it.

Another Warning
I would recommend not using the Advanced Configuration program on CDMA phones. Apparently some settings are just different enough to cause weird problems, one of which is being unable to answer an incoming call. (had that happen on my mogul), still see threads warning about using it on CDMA TP2, so be ready to hard reset if you do decide to try it out.

Advanced Config Tool on Sprint TP2
Thank you last poster on the issue with CDMA and Advanced Configuration Utility. I've been beating my head against the wall trying to figure out why I'm having so much trouble answering the phone. Sometimes I can answer, sometimes not. I've also noticed a few other strange behaviors like not getting the pop up "snooze" message I used to get when using the phones built in alarm.
Looks like my only way of not only removing the ACU but also fixing these problems is a hard reset? That seriously sucks, but at least I have a potential for getting these functions working again.

mvbpma said:
Thank you last poster on the issue with CDMA and Advanced Configuration Utility. I've been beating my head against the wall trying to figure out why I'm having so much trouble answering the phone. Sometimes I can answer, sometimes not. I've also noticed a few other strange behaviors like not getting the pop up "snooze" message I used to get when using the phones built in alarm.
Looks like my only way of not only removing the ACU but also fixing these problems is a hard reset? That seriously sucks, but at least I have a potential for getting these functions working again.
Click to expand...
Click to collapse
Here's a link to a way to fix things without a hard reset. At least it will fix the phone
answering problem. Be sure to stop using Adv Conf too!
http://forum.ppcgeeks.com/showpost.php?p=1205964&postcount=16

Replaced SIM Card -- Now Can't Log In!

I really hope someone can help me with this, because I'm going crazy.
This will require a little history, so bear with me. A couple of weeks ago, I lost my Fuze. Last week, I bought a cheap (prepaid) AT&T GoPhone and called AT&T to have my number transferred to it. I used that phone successfully for several days, until this morning, when my lost phone showed up!
I was ecstatic, thinking that now I'd finally be able to sleep again p), but my excitement changed to disappointment after spending 30 or 40 minutes on the phone with AT&T, explaining my situation over and over to get them to understand what I needed, then following their instructions, and finding that my phone wouldn't work.
They informed me that my old SIM card had been disabled and was therefore useless, and suggested that I put the card from my GoPhone in my Fuze. I did so, but when I then turned the phone on, I got this message:
*****
Owner: Keith Russell
(xxx) xxx-xxxx
Enter your password and tap "Unlock". You can also enter an emergency phone number.
*****
My phone has been passworded in the past, but not recently, because I was trying to resolve some problems and was doing a lot of soft resets and didn't want to have to deal with the logon security. On the other hand, I'm pretty sure the message I was seeing was one I had never seen before. Nevertheless, I tried all the passwords I could think of that I had used on the phone in the past, but none of them worked. Every time, I got this message:
The password you typed is incorrect.
I called AT&T again, and this time spent over an hour on the phone with an AT&T rep and later, an HTC rep. We tried several default passwords, which also didn't work, and the HTC rep finally had me do a hard reset.
I installed my registered version of Sprite Backup 6.5 and restored my most recent good backup. The restore was successful and the application did a soft reset when it was done. Things seemed to be working fine and I spent a couple of hours cleaning up duplicate or large notes to free up memory. I also emptied the recycle bin in Resco Explorer. I then did a soft reset, thinking that might help with the cleanup.
Believe it or not, when the soft reset completed, I got the unlock prompt again!
So I'm stuck. I'm hesitant to do yet another hard reset and restore, because I expect that the same thing would happen again, eventually. I'm also not very excited about calling AT&T Support, because they didn't seem to know any more than I did about this problem.
I have no idea where this unlock prompt is coming from: whether it's hardware, firmware, OS, or application specific. I do have Pocket Secure installed and it's possible that that's what causing it; I just don't know.
Can anyone tell me what's causing this and how I can get around it?
Thanks very, very much for any suggestions you can provide.

u cant do a full restore with sprite as what ever it has that makes the prompt will come back, do custom dont add anything but your contacts and messages.

[Q] The Phone part of my Phone kind of doesn't work anymore!?

I've got this Samsung Focus on AT&T, the other day I decided to force the newest update. I made sure I had all the correct languages and everything. The update went through and most of the phone works. (cellular connection is indeed corruption, and I know about the fix for that.)
Basically what's happening is, the Phone liveTile shows the accumulated missed calls but when I tap on it, the animation freezes then goes back to the homescreen. I can call people through the People app or by using TellMe, and people can call me. I suppose the only thing I can't do is check to see who has called me.
Is this a known issue? Is there a fix? please let me know! as for the backup...
Apparently the backup I did got corrupted in some way, so there's no going back to that (the currently existing back up for some reason is after the update, though I haven't tried using it yet).

restart it. if doesn't work. reset the phone

Yeah, I definitely tried restarting it. I even ran the Samsung tools and that didn't fix anything (including my data issue... I tap on "cellular" in the settings and it doesn't open. ****e.) To modify a classic Bill Gates quote... "I guess that's why they're not shipping 8107 yet."
I think I have an old mango back up from the fall, but oh jeez, that's a lot of backtracking.
I'll keep refreshing this thread to see if any experts have any ideas for a little bit, after a while I'll just reset the phone I guess.
The phone app thing isn't a huge deal at the moment, but no cellular data?! How am I supposed to win arguments without a cellular data connection?

read the thread more carefully, and apply the correct updates - core os update is not enough...just read...please!

Bad update, you need correct language file, i had the same problem on my Titan... Phone live tile, in settings Mobile network etc doesnt work after bad update.

I had the following in my cab sender folder:
- diff-7.10.7720.68-7.10.7740.16-armv7-retail-microsoft.pks_2cb1bfdd82133914239b8ee1a78e61e9000d124a.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0c0a.pks_97df86b81a40df06bb2b15c6739e2ee772e53bbf.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_040c.pks_2d74e8c5f6a835f1fe4c62b488c96ac2d7f01c29.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0407.pks_b50019ef50d52090d408d854c0708ddbf520706c.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0409.pks_bfd9c047a7b27c28208c8a717f8d7511fb2586f1.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0410.pks_9ecf9b052b6cc3161462e998dac8204a0f754556.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.pks_c9b7f3bc5bb340ba30473b566b4557de0cf3322e.cab
Will simple reapplying work perhaps? I mean, I'm pretty sure those are the only ones I needed, I did read the thread quite a few times.

Update reapplied and now it's working!!!!
Now I just need to figure out my internet sharing issue.