Database Info

[GUIDE] How to change the Sprint banner using CDMA workshop

What to change the Sprint banner to something else?
Well here is how.
This is a rough guide, maybe I'll get ambitious and spruce it up when I have some more time...
Install HTC Sync if you haven't already..
Get it here.
http://www.htc.com/www/SupportViewNews.aspx?dl_id=933&news_id=631
Gonna need the HTC Diag drivers, least I did... these work fine:
http://rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip x86 32bit
Here are the /64 bit drivers thanks to techwerkz
http://www.techwerkz.com/evo/HTCDiagDrivers.zip
[highlight]Mod edit: No linking to warez site or suggesting users to get warez is allowed[/highlight]
Enter DIAG mode, dial ##diag#, let windows install the drivers...most likely it won't find the HTC DIAG drivers, but they are in the link above... get it installed.
Now in CDMA workshop, you really don't want to be effin' with stuff you aren't sure what it is... but we are here to change the banner right? riight so don't be changing anything else and you'll be a-ok.
Select your port, hit connect, hit read... goto the NAM tab...hit Read ...change the Banner from "Sprint" to whatever..hit "Write".... then you can reboot the phone and its done.
To find your port...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select your port, hit connect then hit read. ( picture shows "Disconnect" only because I already pushed connect... )
Goto the NAM tab, hit read, change the banner, hit write. Reboot your phone
Enjoy!
Mods if there is a problem with me posting the link to isohunt, I'll gladly remove it.

Thank you so much love these tips

I keep on getting phone does not answer. Is there something else I need to do?

violent23 said:
I keep on getting phone does not answer. Is there something else I need to do?
Click to expand...
Click to collapse
Did all the drivers install? Are you using the correct port? are you in diag mode?

violent23 said:
I keep on getting phone does not answer. Is there something else I need to do?
Click to expand...
Click to collapse
The com port you are using is not the one the phone is using. Go into Device manager and see what port it is running on. The demo version will not allow above port 6 so you may have to change the port.

slayer69 said:
The com port you are using is not the one the phone is using. Go into Device manager and see what port it is running on. The demo version will not allow above port 6 so you may have to change the port.
Click to expand...
Click to collapse
I am an idiot, thanks that solved it.

cool thanks for the guide!

If anyone has the HTC diag drivers for x64 can ya post em... please try them prior to posting.

Finally got it! Thank's OP....

apristel said:
What to change the Sprint banner to something else?
Click to expand...
Click to collapse
Thx for the info.. great job, added to my thread in first post for easy find

Looks good. My 64bit w7 gave me a hard time, it wouldn't install the drivers correctly so I wasn't able to do it last night. I was however, successful when I used my work's xp this morning so it works now.
Thanks!

w7 x64 here also, and it keeps installing the Diag driver as a network driver....

re2gie01 said:
w7 x64 here also, and it keeps installing the Diag driver as a network driver....
Click to expand...
Click to collapse
I have the same issue as well on my Windows 7 x64. Looks like a bug in the installer from HTC. We should let them know its Jacked!. lol

Got it!! For all those with win7 64bit, I have attached the appropriate driver to get the HTC Diag working. Verified this on my machine and installed no problems.

re2gie01 said:
Got it!! For all those with win7 64bit, I have attached the appropriate driver to get the HTC Diag working. Verified this on my machine and installed no problems.
Click to expand...
Click to collapse
Thanks and I will update my OP.
Good work!

just glad to be able to help out

re2gie01 said:
Got it!! For all those with win7 64bit, I have attached the appropriate driver to get the HTC Diag working. Verified this on my machine and installed no problems.
Click to expand...
Click to collapse
Didn't work for me. Windows 7 64 bit.
Edit: It does work on Windows 7 x64. The 64 bit drivers will not be recognized or installed by the Windows 7 automatically. You must force the installation of the drivers by choosing the "Browse" option then "Let Me Pick" option then the "Have Disk" option.

Thanks, that's awesome. I got it working no problem, just followed your instructions
I was sad though, it only lets you put up 12 characters I was going to put up Mistersquirrle but I had to truncate it to Mistrsquirrl. Still great though, thanks

good stuff guys

I did NOT have to install HTC Sync... maybe because I already have the driver installed for adb to work.
But yeah, just had to install the DIAG driver and it worked (Win7 x32)

How to Change Sprint Banner through QPST software . Less then 5 min task !!!

to everyone that want to change their sprint banner & cant or dont want to get CDMA Workshop (due to viruses in every file you can find on the net)
i copied this post from another post that i saw while trying to change my sprint banner & got to this method witch is preaty damn easy ;-)
takes less then 5 min . ** MAKE SURE YOU FOLLOW THE INSTRUCTIONS AND DONT MESS WITH OTHER THINGS IF YOU DONT KNOW WHAT YOUR DOING **
it can BRICK your phone & i will not be held Responsible to any damage you may cause while preforming this task .
I did NOT write this walk-through & again will NOT be responsible for any damages to your phone .
here are the instructions :
1. Install HTC Sync if you haven't already.
2. Download MSL Reader from the market, Run it and save the code for step 8
3. Download QPST:
http://www.x-drivers.com/catalog/fla...pst/12051.html
4. Install QPST software
5. Put phone into Diag mode: dial ##diag# = ##3424#
6. Start QPST service programming. If your phone is in diag mode you will see it listed here.
7. Click Read from phone
8. Enter your SPC number (the one obtained from step number 2)
9. Click the Display tab.
10. Change the banner to what you want.
11. Write to phone. (You may see some Read Only Errors. This is normal)
12. Reboot phone and you will see the new banner.
Should you encounter issues like the phone not showing up in QPST then more then likely
the modem drivers are using a port that QPST does not have as default and you will need to add
the port to QPST. When adding the port to QPST make sure you un-check "Show Serial and
USB/QA Diagnostic ports only" or this will not work.‎
I know there are already other threads out there that offer ways to change the sprint banner.
I wanted to also offer these set of instructions to the community as I get questions about it all the time.
Here is the way I have done it in the past. It does not require HACKED software so this method is fairly safe.
As always do a nand back up before going threw these instructions
and I can not be held responsible if you brick your phone.
Thanks to Slayer69 From XDA for the helpfull information
here is the link to original post :
http://forum.xda-developers.com/showthread.php?t=871601
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Good stuff, I'm going give it a try now.
Sent from the smoke signal app

Works flawlessly just be carefull & good luck
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

post u r new screen
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Ahem. As you can probably see on Slayer's thread, you need to make a note on here that doing this will stop the Nascar and Football apps from working. Some of us, like myself, can't use hacks like this if we use those apps as it will break them and cause them to say that it is for Sprint/Nextel only.

Anyone Evan use them ?
I deleted mine NASCAR & NFL
Never used that stuff ;-)
Sorry .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

BTW Sprint navigation works just fine & Sprint zone also works .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Any ideas why my phone does nothing after dialing ##diag#?

Make sure u r using the right port #
Go to device manager & go to ports & check what port # u r phone uses
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

oranium said:
Make sure u r using the right port #
Go to device manager & go to ports & check what port # u r phone uses
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
When I plug the phone in, do I select htc sync or a different option? Then confirm the port, then dial?
Edit: where do I find the port number under device manager? For location I have a line like this: 0000.001d.0000.001d.001d.000.000.000
Sent from my PC36100 using XDA App

Connect as disk drive ? Look in device manager for ports then click it to see what port u r connected as (com1-7)
Did u get the u r phone code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Msl code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

oranium said:
Msl code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
MSL Reader http://www.appbrain.com/app/msl-reader/com.esccode.msl

when you plug evo to pc select CHARGE ONLY- then dial ##3424#
then run qpst service programming, read from phone (enter MSL) then, 1st click save so that you have a backup from before you change anything, then change banner text- and save again.
Make sure you have the htc diag driver installed (it won't hurt anything, it just wont connect to qpst", through device manager you might need to go to "Browse my computer for driver software" - Then- "Let me pick from a list of device drivers on my computer"-Then "Show all devices" then "Have disk" Then navigate to your folder where you have htcDiag drivers and install that way

Can anyone with an Airave verify that this mod doesn't cause any conflict with the Airave unit?

oranium said:
Anyone Evan use them ?
I deleted mine NASCAR & NFL
Never used that stuff ;-)
Sorry .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
It's irrelevant to ask if anyone uses them. What is relevant is that you need to add a warning on there that for those that DO use them, they will no longer work after applying this modification. Think outside of what you use.
***SINCE THE OP HAS DECIDED NOT TO ADD A WARNING FOR THOSE THAT DO USE SPRINT NASCAR AND SPRINT FOOTBALL LIVE, I'LL DO IT FOR HIM. FOR THOSE OF YOU THAT USE THESE 2 APPS, IF YOU APPLY THIS MODIFICATION, THESE APPS WILL NO LONGER WORK. THEY WILL SAY THAT THEY ARE FOR SPRINT/NEXTEL ONLY.***
Did it for you. I'll make sure a moderator knows as well. I did ask nicely.

guessing this is pc only. mac sigh...

Well I tried the method and stuff I did everything right. Once i open QPST Service Programming and i go to the display tab i enter the banner then i press write to phone. Instead of doing it, it gives me a error saying "NV_UE_IMEI_I" meaning the NV is locked. How can i unlock it? Thanks.

jay713 said:
Well I tried the method and stuff I did everything right. Once i open QPST Service Programming and i go to the display tab i enter the banner then i press write to phone. Instead of doing it, it gives me a error saying "NV_UE_IMEI_I" meaning the NV is locked. How can i unlock it? Thanks.
Click to expand...
Click to collapse
it's ok just ignore error and reboot

louforgiveno said:
it's ok just ignore error and reboot
Click to expand...
Click to collapse
LOL YEAH. I WAS HOT RESTARTING INSTEAD OF DOING A FULL REBOOT. tHANKS THOUGH

[Q] One click root not working

Tried running the program provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1644167
I followed all the steps (there hard to mess up, haha) but when running the .bat it says root then this happens...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm so confused what am I doing wrong? I've tried in charge mode only and mounting the sd card nothing changes..
I've reinstalled the drivers, download the .zip again, reset my phone to factory. What else can I do?
EDIT: USB Debugging is enabled, I enabled it before plugging it in.
UPDATE: It's still not giving root access, I updated my sdk tools after this error still nothing

Enable USB debugging.
Sent from my HTC One X using Tapatalk 2

Make sure you have debugging enabled on your phone.

Sorry I forgot to add the fact usb debugging is enabled.

EDIT: nevermind... re-read your post again.

For some reason sometimes you need to enable debugging before you plug it in.

How long does the rooting process take from where it says "PUSH FILES"? It just seems to sit there for a few mins on my end.

For me it took like 5 min I wan say maybe les, just make sure u guys read everything and don't skip any steps.

So does this work for the at&t? Has anyone tried it?
Sent from my HTC One X using XDA

Your drivers aren't talking to adb. I had an issue yesterday, couldn't install the drivers to save my life. Installed SDK tools, still no go. Everytime I tried to root I got the same error as you.
Try this: Do all of the steps again.
This time, Kill the ADB process tree.
Now, hit the root file again. That may work. Some users are saying that adb won't work for them until they do this.

I've had similar problems on my atrix before. If I remember correctly, it seemed to help when I extracted root files to my desktop.
Sent from my HTC One X using Tapatalk 2

htcvarona said:
So does this work for the at&t? Has anyone tried it?
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Yes, the title of the One Click root says AT&T in it.

XNine said:
Your drivers aren't talking to adb. I had an issue yesterday, couldn't install the drivers to save my life. Installed SDK tools, still no go. Everytime I tried to root I got the same error as you.
Try this: Do all of the steps again.
This time, Kill the ADB process tree.
Now, hit the root file again. That may work. Some users are saying that adb won't work for them until they do this.
Click to expand...
Click to collapse
No cigar, was there 2 adb.exe processes running for you? At first one took me to htc sync so I uninstall sync. When I tried again killing one the other would just keep the CP open.
BBock9 said:
I've had similar problems on my atrix before. If I remember correctly, it seemed to help when I extracted root files to my desktop.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
That didn't seem to help either

Thank you to everyone that's trying to help, its still not working but I appreciate the community's help!

make sure HTC Sync service is not running

Pirateghost said:
make sure HTC Sync service is not running
Click to expand...
Click to collapse
I actually uninstalled it, Sync just didn't seem necessarily if its not supported by the HOX. Then again I could be having a driver issue and it just wasn't seeing the device in Sync. Would anyone recommend the first root method? I'm just running out of ideas...

droidnamedjakke said:
I actually uninstalled it, Sync just didn't seem necessarily if its not supported by the HOX. Then again I could be having a driver issue and it just wasn't seeing the device in Sync. Would anyone recommend the first root method? I'm just running out of ideas...
Click to expand...
Click to collapse
At this point, try it on a different computer if you have one available. That will quickly eliminate any problems that could be causing this on the computers end.
Sent from my HTC One X using Tapatalk 2

Have you tried copying all the files required for root to the c: drive on your computer and then running it from there via command prompt? also, i didnt see it mentioned, but what about running as admin?

BBock9 said:
At this point, try it on a different computer if you have one available. That will quickly eliminate any problems that could be causing this on the computers end.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Bazinga! I have no clue why my gaming rig wouldn't accept the drivers but my little brothers scrappy hp ran everything without a hitch! Many thanks!

droidnamedjakke said:
Bazinga! I have no clue why my gaming rig wouldn't accept the drivers but my little brothers scrappy hp ran everything without a hitch! Many thanks!
Click to expand...
Click to collapse
LOL. My 3K watercooled rig wouldn't install the HTC drivers, my GF's 600 dollar rig did it without a hitch. Glad to see you got it sorted!
I hate Windows.

[Q] UMTS Sticks on TF300 (missing drivers for ttyUSB)

Hi!
I rooted my device and tried the UMTS Manager. The Manager does recognize the plugged in device (it shows IDs of the device). But it does not connect.
After digging around, I have done following:
- downloaded usb_modeswitch
- found out the parameters for my UMTS Stick (Nokia CS-19) and created a config file
when calling usb_modeswitch -c nokia.conf my stick changes mode and starts to show with a blinking light that the Modem is ready.
But there is no ttyUSB0 or anything with ttyUSB* in /dev/ So I guess the kernel module for USB seriall is missing.
Is there a way to include this kernel module somehow?
Edit:
ok with a Huawei Stick it works. The USB serial drivers are included. So the question is: how to make the Nokia CS-19 stick work?

I am going to assume this is what my problem was when i was experimenting last night with my 3G data stick.
Haven't had a chance to really read into it yet how to get these to work i spent maybe 5min just to see and figured id look more later. But just for the hell of it figured id plug in my huawei 1691 to see what happened and looked at a few videos showing people having the option under data modes that i dont see.

Ashcunak said:
I am going to assume this is what my problem was when i was experimenting last night with my 3G data stick.
Haven't had a chance to really read into it yet how to get these to work i spent maybe 5min just to see and figured id look more later. But just for the hell of it figured id plug in my huawei 1691 to see what happened and looked at a few videos showing people having the option under data modes that i dont see.
Click to expand...
Click to collapse
I was wrong. A Huawei E173 Stick works fine. So the drivers are not missing. Which 3G data stick do you use?
Look in the description of UMTS Manager. There is a list of working sticks.

huawei 1691 on wind mobile is my stick, looks like the umts manager fixed it and got it working, yay.

Sweet I've just got my T-Mobile dongle working as well
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

BlackICE said:
Hi!
Edit:
ok with a Huawei Stick it works. The USB serial drivers are included. So the question is: how to make the Nokia CS-19 stick work?
Click to expand...
Click to collapse
Did you do anything beside rooting the device, installing busybox and pluging in your stick to get it working with huawei?
Everything looks fine, except it doesn't connect.
Please help.

system/xbin/iproute not found
I tried a Huawei E169 with UMTS manager but I am always having this message error "System error>/system/xbin/iproute not found - install busybox " which I already did. I am rooted and the iproute dont exist.
So far I cant move forward because Im stuck here so please any help would be great thanks

dwmaihorzes said:
I tried a Huawei E169 with UMTS manager but I am always having this message error "System error>/system/xbin/iproute not found - install busybox " which I already did. I am rooted and the iproute dont exist.
So far I cant move forward because Im stuck here so please any help would be great thanks
Click to expand...
Click to collapse
When you open Busybox again, you can choose where to install. Standard installation path is /system/bin. There is a line saying "will be installed to..." and there you can choose /system/xbin.
Greetings
mr.niceguy76

mr.niceguy76 said:
When you open Busybox again, you can choose where to install. Standard installation path is /system/bin. There is a line saying "will be installed to..." and there you can choose /system/xbin.
Greetings
mr.niceguy76
Click to expand...
Click to collapse
Yep it worked thank you. The pen blue LED is always on, and I got IP but cannot achieve internet. What am I misiing ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same thing happens
Hey,
I hope you guys are fine.
I did the exact same things as dwmaihorzes, but my pen is from Vodafone Portugal.
The blue led keeps on, but i can access Internet on my tablet.
I will ask the same question he asked:
What am I missing?
Regards,
valkirian

Can someone post a guide on how to use umts manager please?

Any developments on this one?
Thank you in advance!

sasdas said:
Can someone post a guide on how to use umts manager please?
Click to expand...
Click to collapse
why not you try PPP widget?

[GUIDE] ZTE Warp N860 (Boost Mobile) Diag Mode

I needed to connect a ZTE Warp to CDMA Workshop and QPST on my pc, so I did some searching to find out how to put the phone into Diag Mode. Easy enough. Well, It took me longer than a few minutes with google to find the info I was looking for, but I did eventually find it. Hopefully this post will help others. I can confirm this works to get the Boost Mobile ZTE N860 (Warp) into diagnostic mode so it can be read by CDMAWS, qxdm, etc.
1. Install the ZTE handset usb drivers: https://www.dropbox.com/s/thf4ctjee960mnt/ZTE_Android_Driver.zip
2. Turn on the phone and connect to pc via usb (make sure you enable usb debugging in settings>applications>development)
3. On the phone go to Dialer and enter *983*87274#
4. A new window will open on the screen with a list of choices. Choose the first item on the list only.
5. Wait a minute or two while the necessary drivers are installed on your computer.
6. Now look in device manager, under ports you should see ZTE Handset Diagnostic Interface (com#).
7. On the phone press home to return to your home screen.
8. Make note of the com port # and you're all set.
You can now connect to qpst, qxdm, and so on. Don't forget to hit the Thanks button below if you found this useful.

Just want"d to say thanks....cause I needed that code...:good:

6thgear76 said:
Just want"d to say thanks....cause I needed that code...:good:
Click to expand...
Click to collapse
Cool. I'm glad it helped you! :good:

Works wonderful on ZTE Avail Z990 as well
You can now connect to qpst, qxdm, and so on. Don't forget to hit the Thanks button below if you found this useful.[/QUOTE]
The above steps work for ZTE Avail z990 (ATT) as well. Works like a charm, ready to connect to QPST/QXDM in a breeze. Thanks.

I can't get qpst to recognize the warp n870. I have all the drivers. Cdma workshop is working just fine but I need to be able to use qpst.
I read somewhere that u have to put the port which is com11 in before it will recognize the phone in device programming. But I dont think im inputting the port in right cuz it wont accept it. Does anyone have some imput?
Sent from my SPH-D710 using Tapatalk 2

Found my Own answer. For those stuck in the future here's the link to a guide on setting up qpst to see your phone. It's how to add you're Ports I was stuck on
http://forum.xda-developers.com/showthread.php?t=1180211
Sent from my SPH-D710 using Tapatalk 2

SelfElevated2 said:
Found my Own answer. For those stuck in the future here's the link to a guide on setting up qpst to see your phone. It's how to add you're Ports I was stuck on
http://forum.xda-developers.com/showthread.php?t=1180211
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Cool, glad you figured it out. I didn't post any info on configuring qpst because it would've been off topic. I'm sure there are people that will appreciate the link you provided. Thanks.

Does anyone have a copy of the USB Drivers, since ZTE took them down?

gadgetdaddy said:
Does anyone have a copy of the USB Drivers, since ZTE took them down?
Click to expand...
Click to collapse
Did you find the drivers? Updated OP with new link.

Good！:good:

budgreen24 said:
Did you find the drivers? Updated OP with new link.
Click to expand...
Click to collapse
It says no files at the new link?

gadgetdaddy said:
It says no files at the new link?
Click to expand...
Click to collapse
Fixed. Try it now.

Bad zip file. Can someone update this download link with a good file please?
Thank you,
John

pede69 said:
Bad zip file. Can someone update this download link with a good file please?
Thank you,
John
Click to expand...
Click to collapse
I just downloaded it to check, and it worked fine for me.

budgreen24 said:
I just downloaded it to check, and it worked fine for me.
Click to expand...
Click to collapse
Worked that time.
However... are you someone that can help me?
Followed your instructions until step 5.
I was a bit confused about which button to push. You said "first item"
So I pushed the FIRST item. The "all functions" button.
Windows came up with it's 3 choice dialog window.
Windows found new hardware.
Locate and install driver software.
Ask me again later.
Do not show this message again for this device.
So then I tried the second one (mass storage+adb) thinking that
maybe since it did a specific thing, you may have meant that one
as the "first item".
Windows did nothing at that point.
No port listing in Device Manager.
Now I'm lost and stuck.
Can you offer any help here?
Thank you,
John
---------- Post added at 01:39 AM ---------- Previous post was at 12:41 AM ----------
When I plug in the phone now and have Windows search for the driver, I get the following...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks...
J
---------- Post added at 02:24 AM ---------- Previous post was at 01:39 AM ----------
OS is Vista 64 Home Pre.

Ok, first item on the list = "All functions".
Then if you see:
pede69 said:
Windows found new hardware.
Locate and install driver software.
Ask me again later.
Do not show this message again for this device.
Click to expand...
Click to collapse
Choose "locate and install driver software". Windows should then install the drivers for you within a minute or so.
If you run into the same message as you did before:
Then I can only guess that it's a compatibility problem with Vista? But like I said, it's a guess. Never tried on Vista, but maybe someone else has? I've had no driver problems using Windows 7 or 8.

Hi...
Thank you for your reply.
Tried clicking on "Locate and install driver software"
Does the exact same thing on my Win 7 64 laptop.
Been going at this since 9am. Very frustrated. About to give up for tonight.
Thanks again,
John

Hi Guys...
Really could use some help here. Have same problem except
Device Manager shows some entries with the yellow triangle
sign. below is a pic of it.
Does the same thing with Win 7 64. Think this could be a 32
vs. 64bit issue? I have several computers but no 32bit OS.
Thanks very much to anyone willing to help me out with this.
J

Today I ran thru this whole procedure on a friend's laptop (windows 8 64-bit) and I didn't have any of the issues you've explained. Windows automatically installed the necessary drivers. The new ports should show up in device manager like this screenshot.
Maybe someone else can help you out..?

Thanks for the reply.
Does not show up in mine because the driver/drivers never install. I get the wrong platform error message.
I have decided to put the ZTE issue aside for now and try and do my wifes phone. And of course I'm having issues...
In DFS on the Mobile ID tab, DFS does not pull the aaa and ha data. And also I get the following errors:
get ds_mip_ss_user_prof cps_error bad_param
get ds_mip_dmu_mn_auth cps_error bad_param
S2 D-710 connects just fine and DFS accepts my SPC/MLS number and 16 digit password. And states
Unlocked in the console.
Going at this three days now. Worn out and pretty much sleep deprived. Sure wish I could get some TeamViewer
help from someone here
Have been laid off so funds are a bit short right now but would be more than happy to give a unlimited webhosting
account complete with Softaculous. Google it if you do not know what it is You would need to get your own
domain name though.
Anyway... thanks again for your reply.
John