Related
Hiya,
I've just lost my last stylus for my XDA II. I've been looking around Makati but none of the shops seems to stock them,
Can anyone tell me anywhere in Manila that I can get spare Styluses?
Thanks.....
stylus
games and gadgets in sm megamall, less than 1K
Galadai,
Two choices:
1. aluminum with plastic ends and other extras such as a built in reset pin and mini ballpen - around 980.00 per piece from former Virramall stores now at the carpark area in greenhills.
2. molded plastic - around 450.00 for a pack of three at Theatermall in greenhills. I forgot the name of the store but its near the stairs. Brand is Digital Express.
I initially went with the aluminum but after I lost it, decided that the plastic will do. Anyway, the tip can double as a reset pin.
Good luck.
Aki
Looking for a extra casing
Hi! I'm looking for a casing.My casing already has a lot of scrathes. Do you know anywhere I could buy this?
Thanks!
I just dropped my diamond by accident while running to my car to avoid the rain =="....
It was in a PDA case, but it still somehow popped out of the case and got scratched up...
So I am in DIRE NEED OF A REPLACEMENT HOUSING!!!
lucky for me, the only damaged parts were the metal rim around the front side of the phone and the battery cover...
I am thinking of just getting an extended battery so i can get a new battery cover with it as well.
But I can't find the Replacement part for the rim around the front of the phone...
I took a lot at the phone and it seems easy enough to replace the rim....but i need to find the part first....
Please guys, any help will be very much appreciated....
Really need this housing replacement...can't stand looking at my scratched up diamond =(
phones still in its early stages so gonna be hard to get hold of housing so quick. Usually best place is here
http://cnn.cn/shop/touch-diamond-c-277_533.html
but they only have screen and back plate at the moment
just be patient a little bit longer.
does that shop deliver quickly??
would it be possible to ask for oem parts directly from htc...?
i talked it over with htc canada today and it may cost upwards 100 CDN to fix the cosmetic damage =(
no insurance?
uh no...i've never insured a phone before....
never thought it would the belt clip would break and let the phone fall and get scratched =="
argh...
any ideas on what to do...
should just take out the rim and touch it up myself ^^"....
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
pizzachips said:
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
Click to expand...
Click to collapse
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
the-equinoxe said:
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
Click to expand...
Click to collapse
i'm just lokoing to replace the outer rim on the front side of the phone and the battery cover....?
so maybe its possible...
ill drop by a local mall and see if its possible i guess....
loads of dummy diamond phones on ebay the last time i check it out.
i wouldn't say loads...
i saw a total of 4 =P lol
average 20-30 dollars CDN
which is fine for me if i can use it as housing and battery cover replacement
anyways heading out to check the dummy model =)
it doesn't work =(
its one giant piece, so i can't really take it apart to replace the piece i want...
How hard is it to take apart the diamond?
The invisible shield really stuffed up my screen. I can see parts flaked off the screen (looks like a thin protection layer) which is believe is the touch sensor itself. It has not affected the use of the phone but looks ugly.
EDIT: Home from work and did a search and found this: http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond/
Looks like a lot of work to get to the digitizer.
wow amazing find...was looking for a page like this...
aw man...the housing is one whole piece from what i can tell from the last picture...guess a DIY housing replacement is not really gonna be easy....
i'm gonna ask HTC for an estimate....
just minor cosmetic damage on mine on the corners so nothing too huge but it pains me to see it every time =(
at least this seems a bit easier than fixing the iphone....its so much work to put in a new digitizer cause of the way the housing is built
Looking for the Telus Black rear cover
If anyone finds a place that is selling the black rear battery cover for the CDMA version of the phone i would be interested.
anyone have any lucking finding a replacement housing?
I can provide the replacement housing
It cost about 36 euro
Like this??
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=350260913226&ssPageName=STRK:MEWAX:IT
http://cnn.cn/shop/advanced_search_result.php?keywords=nexus+one&image.x=0&image.y=0
Ive ordered from here before, and its a great place!
same here. Parts for Cheap!
Is the matte screen protector on there any decent?
I dunno. I've just ordered parts to fix phones, ie screens, keypads, etc and a few battery chargers. Going to love keeping a spare battery on deck again, stupid iPhone.
My Nexus one has a broken LCD but all they have on their site is the digitizer.. Hopefully I can find a replacement LCD soon..
cnn is great, but they ship slooooooow! Keep it in mind if you are on a tight schedule!
Those are not bad prices at that site!
bumpage for the morning folks
Can anyone tell me where to find lcd for nexus?
Nexus one replacement part needed
Does anyone know where I can get a replacement part for the outer shell of the nexus one? The part i need is the aluminum frame that goes around the screen, earpiece, trackball and loops around the lower back... (Picture attached)
I dropped it and the scratches arent bad ont he plastic parts, but the aluminum part near the top (where the earpiece is) is chipped like crazy. Anyone know where I can get this part?
Or if I buy a mock up phone, will it disassemble into the same parts as the external casing for the real thing? Please help! Thanks!
anyone know where i can buy just an external speaker, mine is shot
possible replacement parts source
Searching around for parts for a friends Nexus one myself and found this for the housing.
http://mobile.brando.com/google-nexus-one-replacement-housing_p05399c0670d088.html
Also found this one who supposedly lists parts for the various sub-assemblies http://www.lunacommerce.com/154-nexus-one-spareparts
Have a email sent in to the last one for what they are calling the P/N LNC-GPGNOMB Google Nexus One Mid Chasis. Kind of sucks cause that is really 2 boards and Im only needing the small board that has the sim connector and sd card connector that sits on top of the main motherboard.
Have one broken pin on the sim card that is preventing the phone from being usable at this point and not able to find just the replacement sim connector or the board its on, instead the whole main board would require replacement. doubtful its gonna be cheap either. Anyone have a damaged unit with these cards they want to get rid of?
anyone else having problems using the lunacommerce site? i sent for an enquiry for a part and it said the price was sent to email but is not there?
good to know all these parts are available
Can you fix that SIM connector pin with solder?
Does someone know if the dummy phone have the same material as the real one?
I have also scratches in the aluminium around the phone, wondering if I can take apart the dummy and replace this onto my real one.
http://cnn.cn/shop/google-nexus-dummy-phone-p-8442.html
Ive ordered from CNN as well, parts where nice and fit great... I too am interested in replacement body parts for the N1.
I just looked for some parts around Brando site...
If you enter "Nexus One" as a search string you get all parts they have:
http://mobile.brando.com/search.php?keyword=nexus+one&Submit=Product+Search
as for me, a bit cheaper that "CNN" proposes.
djstoffe said:
Does someone know if the dummy phone have the same material as the real one?
I have also scratches in the aluminium around the phone, wondering if I can take apart the dummy and replace this onto my real one.
http://cnn.cn/shop/google-nexus-dummy-phone-p-8442.html
Click to expand...
Click to collapse
Let me know if you have any luck with this I too have a number of scratches on my device.
This place also has the housing:
http://www.globaldirectparts.com/OEM-Google-Nexus-One-Housing-p/htc736560.htm
Wtf? For 80$ I can live with my scratches...
does anybody know where i can buy a white back housing for my sensation? ive been trying to look everywhere but all i find are really expensive ones.. amazon and ebay an some random sites i find on google
marcviado said:
does anybody know where i can buy a white back housing for my sensation? ive been trying to look everywhere but all i find are really expensive ones.. amazon and ebay an some random sites i find on google
Click to expand...
Click to collapse
How much are you looking at paying?
I use a cover from Platinum Communications, it's quite good, not perfect, but it's quite up there.
Pros
-Doesn't stick in your pocket
-Doesn't change size dramatically with the temp.
-Doesn't flex and warp
-Extremely durable
-Doesn't mark easy
Cons
-Doesn't cover the rear camera as much as I'd like
-I had to modify the charger port hole to make it a little larger rather than a perfect fit
-Rough edges on the side
But other than that, I rate it highly.
Trying searching for Sensation Housing Cover Case on amazon.
I bought this one grey/black back plate from amazon, not as good as the oem, but it does the job. =)
And now the pristine MAO case has some horrendous chips and scratches, and I'm really pissed off.
I can't seem to find a reliable or legit looking seller on eBay that will sell a genuine MAO case, the new bevelled USB version. I'm based in the UK, but wouldn't mind buying from an international seller that ships to the UK also. Does anyone know of any good eBay sellers selling genuine HTC parts?
Failing that, does anyone know roughly how much it would cost if I were to send it back to HTC to replace it? I asked HTC support but they don't sell spare parts and can't give a quote unless I send the phone first. Any estimate would be great.
Thanks.
Anybody..?
djsubtronic said:
Anybody..?
Click to expand...
Click to collapse
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
el_smurfo said:
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
Click to expand...
Click to collapse
The chips are pretty bad. Nail polish is gonna look hideous. Plus the whole point of this phone was to not put it in a case. I'm usually very careful with dropping a phone, this is the first time it's ever happened in my life.
I think I'm just gonna buy a housing off eBay and replace it. And if the housing turns out to be crap (even though they assure it is genuine) then next step would be to insure it and then make a claim.
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
doartest said:
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
Click to expand...
Click to collapse
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
djsubtronic said:
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
Click to expand...
Click to collapse
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
doartest said:
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
Click to expand...
Click to collapse
Ahhh yea those pics are crap. Thanks for your help anyway. I'll think it over and see what I should do.
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
evilRafael said:
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
Click to expand...
Click to collapse
Pop your plastic covers for starters.
dr_rick13 said:
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
el_smurfo said:
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
Click to expand...
Click to collapse
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
By the way, you can buy HTC void stickers too:
http://www.ebay.co.uk/itm/8-VOID-WA...K_Replacement_Parts_Tools&hash=item337c0261f7
If I ever do need to send it back to HTC under warranty I'm sure those would do the trick
djsubtronic said:
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
Click to expand...
Click to collapse
how does the lower cover pop off...straight out, like the top?
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
It almost always is for regulatory reasons (less radiation in the dummy head) even though it makes for less signal when "you're holding it wrong". There's an anandtech review showing the antenna placement as well.
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Well for me I slowly pried the gap at the bottom edge. It's got adhesive on the inside sticking it onto that plastic assembly I mentioned earlier, but just keep prying it slowly so the adhesive doesn't get all messed up. It should flip open like a door with the hinges being where the beats logo is, eventually it'll open right out then just pop it out.
Hi guys,
I got similar story and want to replace my housing.
I have the EU S4 black/red model. I think its one of those with the chipping issue, but not much damage, until the drop which cut the top corner to straight 45 degree white line and scratches my finger every time I use it in landscape mode.
Anyway wanted to ask, since you already tried/used it for some time.
Is the eBay one genuine or just a good fake?
Or is the one from parts4repair a better choice?
Also after removing the bottom plastic cover, as I understand it has glue to it to keep it in place. Do I need to replace that on the reassembly or just heating it back and pressing will work with the old one? Or it has something else to keep it in place other than the glue?