Database Info

Cracked round button

Hello,
Today the round button on my Touch Pro cracked, it's a small crack, but it's definitely noticeable. So far it's working properly, both the capacitive and pressing functions. Should I be worried? Is it possible to find the housing for sale so I can replace it?
My warranty is only valid until jan 15, which is 3 days from now, but that would take at least a couple of weeks without my phone, and I don't even know if the warranty covers cracked housing.
The weirdest thing is that I did nothing to the phone, actually I don't even know how long it's been there, I just noticed it today.
So, should I keep it anyway?
Thanks.

Smaniac said:
Hello,
Today the round button on my Touch Pro cracked, it's a small crack, but it's definitely noticeable. So far it's working properly, both the capacitive and pressing functions. Should I be worried? Is it possible to find the housing for sale so I can replace it?
My warranty is only valid until jan 15, which is 3 days from now, but that would take at least a couple of weeks without my phone, and I don't even know if the warranty covers cracked housing.
The weirdest thing is that I did nothing to the phone, actually I don't even know how long it's been there, I just noticed it today.
So, should I keep it anyway?
Thanks.
Click to expand...
Click to collapse
**** that sucks i was under the impression that you cracked the softwar to remap it... not literally.. LOL again that sucks. There is a websight for mike channon, (an xda member) Who has step by step of how to disassemble htc phones. Maybe there is a parts directory for Htc and you may be able to replace by yourself! Check it out. adeus

sdlopez83 said:
**** that sucks i was under the impression that you cracked the softwar to remap it... not literally.. LOL again that sucks. There is a websight for mike channon, (an xda member) Who has step by step of how to disassemble htc phones. Maybe there is a parts directory for Htc and you may be able to replace by yourself! Check it out. adeus
Click to expand...
Click to collapse
I'll do that, I don't feel like using my warranty, now that I got used to it I barely notice the crack. If something gets worse though I will search for the replacement part.
Thanks!

Brando has a complete replacement housing (minus the lcd/touchscreen, which Brando sells separately):
http://mobile.brando.com.hk/prod_detail.php?prod_id=03811&dept_id=088&cat_id=0670
It's a bit expensive for just replacing one part, but it might not be a bad idea to keep the extra parts handy.

fhsieh said:
Brando has a complete replacement housing (minus the lcd/touchscreen, which Brando sells separately):
http://mobile.brando.com.hk/prod_detail.php?prod_id=03811&dept_id=088&cat_id=0670
It's a bit expensive for just replacing one part, but it might not be a bad idea to keep the extra parts handy.
Click to expand...
Click to collapse
That seems like a great solution! It will definitely be an option if things get worse. Thanks a lot both of you, because I'll obviously need to disassemble it too.

Some Nexus One Parts etc...

http://cnn.cn/shop/advanced_search_result.php?keywords=nexus+one&image.x=0&image.y=0
Ive ordered from here before, and its a great place!

same here. Parts for Cheap!

Is the matte screen protector on there any decent?

I dunno. I've just ordered parts to fix phones, ie screens, keypads, etc and a few battery chargers. Going to love keeping a spare battery on deck again, stupid iPhone.

My Nexus one has a broken LCD but all they have on their site is the digitizer.. Hopefully I can find a replacement LCD soon..

cnn is great, but they ship slooooooow! Keep it in mind if you are on a tight schedule!

Those are not bad prices at that site!

bumpage for the morning folks

Can anyone tell me where to find lcd for nexus?

Nexus one replacement part needed
Does anyone know where I can get a replacement part for the outer shell of the nexus one? The part i need is the aluminum frame that goes around the screen, earpiece, trackball and loops around the lower back... (Picture attached)
I dropped it and the scratches arent bad ont he plastic parts, but the aluminum part near the top (where the earpiece is) is chipped like crazy. Anyone know where I can get this part?
Or if I buy a mock up phone, will it disassemble into the same parts as the external casing for the real thing? Please help! Thanks!

anyone know where i can buy just an external speaker, mine is shot

possible replacement parts source
Searching around for parts for a friends Nexus one myself and found this for the housing.
http://mobile.brando.com/google-nexus-one-replacement-housing_p05399c0670d088.html
Also found this one who supposedly lists parts for the various sub-assemblies http://www.lunacommerce.com/154-nexus-one-spareparts
Have a email sent in to the last one for what they are calling the P/N LNC-GPGNOMB Google Nexus One Mid Chasis. Kind of sucks cause that is really 2 boards and Im only needing the small board that has the sim connector and sd card connector that sits on top of the main motherboard.
Have one broken pin on the sim card that is preventing the phone from being usable at this point and not able to find just the replacement sim connector or the board its on, instead the whole main board would require replacement. doubtful its gonna be cheap either. Anyone have a damaged unit with these cards they want to get rid of?

anyone else having problems using the lunacommerce site? i sent for an enquiry for a part and it said the price was sent to email but is not there?

good to know all these parts are available
Can you fix that SIM connector pin with solder?

Does someone know if the dummy phone have the same material as the real one?
I have also scratches in the aluminium around the phone, wondering if I can take apart the dummy and replace this onto my real one.
http://cnn.cn/shop/google-nexus-dummy-phone-p-8442.html

Ive ordered from CNN as well, parts where nice and fit great... I too am interested in replacement body parts for the N1.

I just looked for some parts around Brando site...
If you enter "Nexus One" as a search string you get all parts they have:
http://mobile.brando.com/search.php?keyword=nexus+one&Submit=Product+Search
as for me, a bit cheaper that "CNN" proposes.

djstoffe said:
Does someone know if the dummy phone have the same material as the real one?
I have also scratches in the aluminium around the phone, wondering if I can take apart the dummy and replace this onto my real one.
http://cnn.cn/shop/google-nexus-dummy-phone-p-8442.html
Click to expand...
Click to collapse
Let me know if you have any luck with this I too have a number of scratches on my device.

This place also has the housing:
http://www.globaldirectparts.com/OEM-Google-Nexus-One-Housing-p/htc736560.htm

Wtf? For 80$ I can live with my scratches...

[Q] Bezel around the screen - replacement??

Hi
I have damaged the metallic black bezel around the screen at a few places (especially the part above the micro usb port). I guess it is called Faceplate.
What I wanted to know is if I can replace this part somehow. If I look at the region under the screen after opening the slider, it appears as if it can come off.
If it is possible to replace it, does anyone know where can I buy one of these?? I have googled but could not find anything.

I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204

---UFO--- said:
I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204
Click to expand...
Click to collapse
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??

sahilarora911 said:
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??
Click to expand...
Click to collapse
I've ordered one from the link above and I should receive it in the next 7-14 days so I'll let you know how I go but I'm 100% confident that the physical housing between the MS2 and D2 are identical.

I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.

Well I have managed to knick the display input cable and now have a one centimetre row smack in the middle of the screen that won't respond to touch. My fault, I thought I'd taken care to ensure no damage to some of these fragile cables but alas no
So, just ordered a SGII Stick that where the sun doesn't shine Motorola! Yeah, I know you couldn't care less but I feel better

Well thanks for the info. I won't have the luxury of buying a new one if I ruin my MS2 so I guess I'll stick with a little wear and tear. BTW nice buy!!

Or just take it to your nearest phone repair shop and they'll sort it out. =D

MegaBubbletea said:
Or just take it to your nearest phone repair shop and they'll sort it out. =D
Click to expand...
Click to collapse
Funny bugga, this is BrisVegas!

nurofenplus said:
Funny bugga, this is BrisVegas!
Click to expand...
Click to collapse
Haha true
Sent from my MotoA953 using xda premium

nurofenplus said:
I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.
Click to expand...
Click to collapse
How does the housing attach to the digitizer/glass? Because the tutorial I found on iFixit didn't detach the digitizer from the housing.
My housing cracked badly, I "fixed" a corner with superglue, but I think it permeated through the digitizer, so there's a strip in the left side (the one with the MENU button) which is insensitive. Another drop and the whole top part fell off and I don't intend to glue this one. Probably I'll buy a new front panel and a new digitizer, but I need to know if I'll be able to attach them at home or if I'll need some adhesive (yuck).
Thanks in advance! :fingers-crossed:

Dropped my phone on concrete :(

And now the pristine MAO case has some horrendous chips and scratches, and I'm really pissed off.
I can't seem to find a reliable or legit looking seller on eBay that will sell a genuine MAO case, the new bevelled USB version. I'm based in the UK, but wouldn't mind buying from an international seller that ships to the UK also. Does anyone know of any good eBay sellers selling genuine HTC parts?
Failing that, does anyone know roughly how much it would cost if I were to send it back to HTC to replace it? I asked HTC support but they don't sell spare parts and can't give a quote unless I send the phone first. Any estimate would be great.
Thanks.

Anybody..?

djsubtronic said:
Anybody..?
Click to expand...
Click to collapse
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.

el_smurfo said:
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
Click to expand...
Click to collapse
The chips are pretty bad. Nail polish is gonna look hideous. Plus the whole point of this phone was to not put it in a case. I'm usually very careful with dropping a phone, this is the first time it's ever happened in my life.
I think I'm just gonna buy a housing off eBay and replace it. And if the housing turns out to be crap (even though they assure it is genuine) then next step would be to insure it and then make a claim.

Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!

doartest said:
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
Click to expand...
Click to collapse
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.

djsubtronic said:
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
Click to expand...
Click to collapse
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.

doartest said:
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
Click to expand...
Click to collapse
Ahhh yea those pics are crap. Thanks for your help anyway. I'll think it over and see what I should do.

Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.

evilRafael said:
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
Click to expand...
Click to collapse
Pop your plastic covers for starters.

dr_rick13 said:
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
el_smurfo said:
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
Click to expand...
Click to collapse
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.

By the way, you can buy HTC void stickers too:
http://www.ebay.co.uk/itm/8-VOID-WA...K_Replacement_Parts_Tools&hash=item337c0261f7
If I ever do need to send it back to HTC under warranty I'm sure those would do the trick

djsubtronic said:
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
Click to expand...
Click to collapse
how does the lower cover pop off...straight out, like the top?

el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium

ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
It almost always is for regulatory reasons (less radiation in the dummy head) even though it makes for less signal when "you're holding it wrong". There's an anandtech review showing the antenna placement as well.

el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Well for me I slowly pried the gap at the bottom edge. It's got adhesive on the inside sticking it onto that plastic assembly I mentioned earlier, but just keep prying it slowly so the adhesive doesn't get all messed up. It should flip open like a door with the hinges being where the beats logo is, eventually it'll open right out then just pop it out.

Hi guys,
I got similar story and want to replace my housing.
I have the EU S4 black/red model. I think its one of those with the chipping issue, but not much damage, until the drop which cut the top corner to straight 45 degree white line and scratches my finger every time I use it in landscape mode.
Anyway wanted to ask, since you already tried/used it for some time.
Is the eBay one genuine or just a good fake?
Or is the one from parts4repair a better choice?
Also after removing the bottom plastic cover, as I understand it has glue to it to keep it in place. Do I need to replace that on the reassembly or just heating it back and pressing will work with the old one? Or it has something else to keep it in place other than the glue?

Anyone replace U11 rear glass cover?

Has anyone done a replacement on their own? I'm hoping someone's done it and can say simple or watch out for X. I've got a heat gun, all kinds of tools, and have watched the teardowns.
I dropped it a month ago and just the corner was cracked, now most of the back is a spider web.
HTC branded ones are $80 on eBay and aren't the kind of thing you want to go cheap on. Thanks for any feedback.

I too need to know. Didn't even play with it for 6 hours and it tumbled and completely shattered. From the vids, it doesn't look too difficult but ya, if there is anything to look out for let us know. Thanks!

In the teardown videos you can usually see what you have to look for, like if there's something attached to it (NFC antenna for example).
Watch a few different ones and you should be good.
The only advice i can give from fixing a lot of phones is, to not rely on the adhesive which usually comes already placed on the part.
Buy some special liquid glue for it! It will save you a lot of headaches, keep it dust free and preserve the waterproof feature.
With the delievered adhesive you will soon have dust in your camera, and if you don't clean every bit of the old adhesive before
replacing it, sooner or later it will get loose.

Nightmare[ITA said:
;75529420]In the teardown video you can usually see what you have to look for, like if there's something attached to it (NFC antenna for example).
Watch a few different ones and you should be good.
The only advice i can give from fixing a lot of phones is to not rely on the adhesive which usually comes already place on the part.
Buy some special liquid glue for it! It will save you a lot of headaches, keep it dust free and preserve the waterproof feature.
With the delievered adhesive you will soon have dust in your camera, and if you don't clean every bit of the old one before replacing it,
sooner or later it will get loose.
Click to expand...
Click to collapse
Will do. I have a pile of parts for phone repair and glue tape. If a liquid glue is really better for the water sealing, is there a specific phrase to punch into Amazon to get the stuff you use?
Oddly enough, the part was $80 on eBay and they all disappeared. There's only $40 'used' but cosmetically perfect ones. I got the cheaper one and will be happy.
Thanks for the feedback. It should arrive this coming week. I'll post results.

jimbob_sf said:
Will do. I have a pile of parts for phone repair and glue tape. If a liquid glue is really better for the water sealing, is there a specific phrase to punch into Amazon to get the stuff you use?
Oddly enough, the part was $80 on eBay and they all disappeared. There's only $40 'used' but cosmetically perfect ones. I got the cheaper one and will be happy.
Thanks for the feedback. It should arrive this coming week. I'll post results.
Click to expand...
Click to collapse
There's no amazon where i live
Quick google search should give you some options

Used ones do not come with the double tape adhesive on the back and I'm not sure you can find that anywhere to buy. If you use some kind of liquid glue, which I did on an S7, because the phone is sealed, all the vapors will affect the internal components and you need to reopen the phone in order to clean them ( mine had a problem with the light on the menu button ) which will result in breaking the glass back.
You have two options:
1. buy some glue that is made specifically for this
2. buy some double sided tape ( best option ).
Good luck !

It actually came with the factory tape on and an extra set of 3m tape. It was exactly the same as the stuff used by the factory. The only area not covered was a section of the lower right of the phone. I cut up some of the extra and stuck it down. Heat it all up and its new again.
Zero complaints, easy. Thanks for the pointers!

jimbob_sf said:
It actually came with the factory tape on and an extra set of 3m tape. It was exactly the same as the stuff used by the factory. The only area not covered was a section of the lower right of the phone. I cut up some of the extra and stuck it down. Heat it all up and its new again.
Zero complaints, easy. Thanks for the pointers!
Click to expand...
Click to collapse
Where did you buy the back glass from?

nakedidea said:
Where did you buy the back glass from?
Click to expand...
Click to collapse
I got it from eBay. KK Parts was the vendor. I got a screen a few weeks later from them because they sent what they described. They were honest with a small scratch on the screen I got a few weeks later. When I looked at eBay vendors (all China), a lot had taken pictures from another post. KK was one of 2 or 3 who showed pictures of what you were buying.
Plus... the rear glass had the factory waterproof tape mounted on the back and they gave extra strips. I'd buy from them again

Hi Jimbob,
Do you have a link to the ebay page? I am having trouble finding that vendor.
Thanks for your help.

https://www.fonejoy.com/htc/u11.html

boccon said:
https://www.fonejoy.com/htc/u11.html
Click to expand...
Click to collapse
That's just the glue mate, not the cover, but yea I can fix it.

HTC U11 Life back cover repair
I've seen some repair video online and it seems not difficult. I had a HTC U11 and crack on back cover accidentally, bought a new cover from witrigs and replace it myself, it's quite easy than I thought, just follow the tutorial and heat up for enough time.