Database Info

Dutty Latest WM6.1 Bluetooth Activesync

I have installed the latest ROM from Dutty.
I have re-installed everything and paired with BT headset. Using Voice Command with headset no problem.
What I have not been able to figure out is to get Activesync working thru bluetooth. I have it paired with my laptop put it only gives me the option for Dial up networking for services.
Everything else is working better than ever and this ROM makes me appreciate my Tilt even more.
Any suggestions?

I suggest you post this question in his latest ROM thread. That is a more appropriate place to post this questions.
good luck.

Anybody have any suggestions on this issue.
This is the only thing I have not working. Just fixed VC1.6 Call announce.
Any help would be great.

To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.

TerraNocuus said:
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
Click to expand...
Click to collapse
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks

cephus6 said:
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
Click to expand...
Click to collapse
make sure that activesync is set to the com port that you have defined as an incoming com port for you bluetooth (on the pc, not the phone). how to do this.......it all depends on what bluetooth stack you are using.

Finally got it.
The COM port matched in ActiveSync, but I discovered the bluetooth on my laptop would not delete my old version phone. It said it deleted, delete, close, reopen and it would reappear. Once I killed that everything worked like a charm.
Thanks for everyone's help and thank you Dutty for your work.

HTC Touch Pro - Active Sync with Vista via Bluetooth

I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben

I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.

You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.

Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.

Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.

Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?

my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419

i have the same problem with Toshiba laptop..i have tried everything

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.

lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.

It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.

This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)

I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance

EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...

woks perfectly!!!
many thanks.

Activesync won't recognize Raphael,...

hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek

Are you running any firewall software? If so, this is relevant to you.

start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"

sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...

ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek

Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.

Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.

Also, are you using Vista or XP. The problems seem to be with XP.

my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.

btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.

if you are putting on a new rom then put the phone in bootloader mode it worked for me

LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.

Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.

Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax

Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)

wierd problem

hello my htc touch pro does not connect with activesync but the phone works perfectly

usb?
bluetooth?
tried other usb ports if usb ?
tried another computer?

yes i have tryed all tha no differance it will not work with active synce i tryed a hard restaand all what i could think of

1. check the manual
2. get newest activesync from microsoft
3. check settings (connection - usb to pc)
4. keep in mind, that it does not work with vista (at least it's not that easy)
5. if all that does not help, google or post again... we should find a solution

Also, do you synch another phone on this same computer? XP/winmo hasn't previously allowed synching two mobile devices. However i see they are offering a mobile "suite" that will help with this. (at winmo site).
When i first got my fuze i went thru this very same thing. Because my kaiser was already being used on the same computer.

yeah my kasier syncs fine

You should backup your data and upgrade your ROM. Which one are you using now? My experiences says it may solve a lot of troubles...

had this same problem a while back. make sure you don't have activesync on your computer looking for the old partnership and try going to settings>connections(tab)>USB to PC and unchecking "enable advanced network functionality" or if that is unchecked, try re-checking it.

*SOLVED* ActiveSync via Bluetooth? NO COM PORT CHOICES?

Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0

I usually only get it to work if there's a partnership established already. Meaning you should first connect it by wire, do an initial sync, and then try using bluetooth.

malloy0 said:
Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0
Click to expand...
Click to collapse
zzattack, others...
Well...it took me almost all night, but I learned aha! that the devices were NOT paired, when they are and ONLY WHEN THEY ARE, do you have the option to set an OUTGOING PORT. so I got it to work, frankly, this should be easier than it is. Now, with this said the AS connection is very, very tempermental in that
1. I stop syncing,
2. leave my office, with my phone / PDA with me,
3. return and reconnect via BT, then
4. activate sync from the phone / PDA AS, via the Connect via Bluetooth
5. I get the SET UP AN AS PARTNERSHIP and say YES then I can resync
6. Again too, too funky, but at least no USB cord
7. In the end I wil give this sync method a whirl and see how it goes.
Thanks!!
malloy0

THread moved to Q&A

Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select t create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
Make sure you are initiating the pairing from the ppc, and always initiate the sync from the ppc.