Database Info

activesync and wm6

I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!

I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?

Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !

Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....

DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.

when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard

japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....

SYNC no longer recognized

Ok I am no newbie to this, but I am sick of the frustration that comes with this problem. I've had me TC for a couple months now and it will not be recognized with my PC. I've had this problem before.... deleting the partnership, changing the USB ports and settings, downloading the newest sync software, and shutting down the fire wall, yet nothing works. The only thing I can do is use Bluetooth, which is to slow to transfer files. I need some help here, because even backing up everything on the phone and doing a hard reset takes too long to restore what I have on it now.

try to unmark ->settings->connections->usbtoPC-> enhanced network functions.
sorry, i have a german one, so look for that function.

I have the same problem with my o2 xda orbit 2.
I found that if I turned off the bluetooth and wifi it connected ok but even that seems to have stopped working now.

I got it back
I shut off the windows firewall with Vista and it works every time now. This is odd since I always had it on before and never made a change to the settings. In fact once I had given permission for windows mobile center to run with the security I never had this problem before. All I can say is it is a serious pain to disable it every time I want to access my files on the phone.

the joys of activesync......
I'm running XP-Pro on both my home and desktop PC's
with my orbit 2 I have no problem connecting at home, but failed miserably at work (other than the first time after I'd installed activesync).
I'd concluded that it was my firewall settings (which are outside of my authority to alter) we're the cause of the problem and gave up.
What usually happens is an activesync connection is established (I alway click on cancel in the first box - because I don't want to sync files etc, just to be able to explore and install software), and then when I click on explore (after it says connected) it just hangs for a minutes or so, before disconnecting.
However, I hooked up my Orbit2 to my laptop in my hotel last night (to charge) and I noticed that I could explore. OK I thought, it was the firewall.
But then today I tried exactly the same thing, and we're back to the non communicating version.
Any ideas,
Any ways to force activesync into submission - even if just at the explore level?
Thanks

simple joys
Well Vista doesn't use active sync, but I'll try to give you what I have learned. First it always helps to have the latest version of the software. I'd delete active sync from the computer and end the partnership on the phone. The phone then says to hook it up with a computer to establish a connection. Before you do restart both. Download newest version from windowsmobile, install and restart again. Disable firewall and any antivirus ( it makes a difference ) and try to establish the new partnership. If that doesn't work sometimes the comm ports are wrong and you have to find out which your phone uses. Once I had a Moto Q9h unbranded that would not sync with USB no matter what I did from the start, but it would work with a bluetooth sync. That was the worst speed ever. Anyway Good Luck.

Thanks,
yes I am using the latest (for XP) active sync.
I also uninstalled it / re-installed it
I also deleted the profile
All to no avail
Virus / Firewall settings are locked on this laptop.

Same problem
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.

no sync with xp and vista
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...

swatguard said:
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.
Click to expand...
Click to collapse
You said you updated active sync, but Vista doesn't use that program. You need to use Windows mobile device center. If you go to windowsmobile.com there is an update you can download that you install with the phone connected. That might work.

nooms said:
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...
Click to expand...
Click to collapse
You have to delete every time, because once it is synced with one computer it establishes a relationship with that pc or laptop. The two operating systems use two different programs, but really the computers should have the partnership saved. I'm not sure if the phone can have two as well though.

HTC Touch Pro - Active Sync with Vista via Bluetooth

I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben

I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.

You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.

Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.

Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.

Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?

my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419

i have the same problem with Toshiba laptop..i have tried everything

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.

lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.

It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.

This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)

I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance

EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...

woks perfectly!!!
many thanks.

ActiveSync via BT on Vista with 2125?

Has anyone been able to get ActiveSync to work over Bluetooth in Vista with a 2125? Which English ROM will I have the best of luck with as my USB Bluetooth on my desktop computer running vista ultimate x86 keeps telling me that my phone doesnt support activesync over bluetooth.
Also where can I get the Stock Cingular ROM for my 2125?
Can anyone point to to a guide on how to set it up?
any ideas?
many thanks,
SG

No one has because you dont need Active Sync in Vista, Vista comes preloaded with Windows Mobile Device Centre

Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?

SomeGuy2008 said:
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
Click to expand...
Click to collapse
Have you done a wired sync with that computer before? If not, you should do it. I've read that in the past. It fixed a sync problem with one of my phones, however, I've done it w/o too and it works. Have you created a BT Partnership between your computer and your phone? When you create the partnership, click on Advanced, re-confirm the PC name, then on the Services Window, checkmark Active sync. Then open active sync on phone, and click on right menu and chose Connect via BT. It should work. Good Luck!
EDIT: The partnership has to be created from the phone, not from the PC. If created from the PC, as far as my experience, it'll create a Modem Dialup connection partnership that will allow the PC to connect to the internet via BT using Wap connection on your phone. If you do want to create that too, use *99# as the dialup phone number. Leave blank the User name and PW.

Thanks for the reply.
When I try to setup a partnership from the phone I see my computer but I only see 3 service. Stereo somthing, handsfree, and something else but none of which are active sync. Yet when I look on my computer I see that activesync is in the list and selected.
I have a IOGear BT211 (Broadcom 2045) USB Dongle running in Vista Ultimate SP1.
Could it be my BT211 Driver? I have the latest version 5.1.x
Thanks,

Well the new phone I bought has all the drivers for Vista on CD. But its installed on my son's Laptop and he don't let daddy get nearby his toys LOL so, I really couldn't help more. I do know active sync works over BT with Vista. So I guess you'll have to keep trying. Do you have any instalation CD for your phone? From what I remember, if you don't have the "Outlook" that comes with the phone instalation, you might not be able to. I remember it didn't work untill we installed the one on the phone CD. All though, his Laptop had MS Office already installed. So... take a look around that.

My Bad. I had the wrong Window drivers installed for my BT on my desktop. LOL. Who would have though that the Windows XP drivers wouldnt work under Vista? lol
Thanks for the help.
GD

activesync (Windows Mobile Device Center) via bluetooth on Vista
I went through a similarly difficult experience with a Lenovo laptop. I blogged about it here:
http://mitchwyle.blogspot.com/2008/11/activesync-via-bluetooth.html

PC's don't see my Fuze no more?

I haven't plugged my fuze into any PC's for a couple of months - last time I did it was with a Windows 7 machine and it worked fine....
Well - now I'm trying to get the thing to sync with an XP machine. When I plug it into the usb, I see the fuze is charging - but activesync never comes up and nothing on the pc indicates that is saw me do this.
I've tried with 3 different XP machines here today - and none of them realize I've plugged anything in when I connect my fuze?
Soo...must be something with my fuze? Anyone have any ideas?
Only thing I saw was in settings/connections/usb to pc
there is an option for "enable advanced network functionality" - which I have disabled.
FYI I'm running WM 6.5 on it....

All previous reports of this issue ended with bad USB port on Fuze but you may want to search and read a couple of the threads first.

Interesting.
I can't seem to find any of these treads - can you point me to any?
Seems rather odd that if the port was bad that the phone would still charge though....

Let me ask you this, you say that you changed your PC to USB settings to Enable Advanced network functionality, I thought this setting was in Active Sync. USB to PC setting should be to "enable faster data transmission". Have you played with both settings?
Here is one recent thread and I know I saw another that mentioned the device would charge but not sync.
Here are many more threads regarding AS issues.

Bruce Inman said:
Let me ask you this, you say that you changed your PC to USB settings to Enable Advanced network functionality, I thought this setting was in Active Sync. USB to PC setting should be to "enable faster data transmission". Have you played with both settings?
Click to expand...
Click to collapse
I'm using WM 6.5 - and there I see:
settings/connections/USBtoPC
..that brings up a window which has settings on the behavior of the device when you connect it to a pc via USB. The options are to a) ActiveSync or b) DiskDrive
If you select a) ActiveSync you can "enable advanced network functionality"
There is also an option at the bottom that will cause it to ask which connection type to use when you connect.
I've tried all possible combinations - my pc does nothing when I connect, but I *do* see the fuze charging...freakn strange!

Have you tried to connect through an emulator like MyMobiler?
Its most likely a driver issue on your phone.
Hate to say it but.....
If all else fails, Hard Reset, flash back to stock ROM (if you've flashed a cooked ROM) and this should restore the corrupt driver.

Bruce Inman said:
Have you tried to connect through an emulator like MyMobiler?
Its most likely a driver issue on your phone.
Hate to say it but.....
If all else fails, Hard Reset, flash back to stock ROM (if you've flashed a cooked ROM) and this should restore the corrupt driver.
Click to expand...
Click to collapse
MyMobiler uses activesync to connect so that won't really be of any help at this point...
I was considering doing a hard-reset - but MAN I have about 140 apps installed and configured so I really hate doing that. What would be nice is if I could just find the driver and try that.
So that I suppose is my next question - anyone got the driver? hahaha

I use Pocket Controller which can use an IP address instead, I assumed MyMoblier was similar.
Copy the enclosed .dll to your windows directory using something like total commander because it is a cooked in system file. It still may not allow it though.
You should also look into Sashimi restoral program, as it is not uncommon to have to hard reset occassionally.
Good luck!

Is a firewall blocking it?
Each time I want to sync my Fuze, I have to disable my firewall. For some reason, even when I open the correct ports, my Fuze will not sync to Windows Mobile Device Center on my Vista Ultimate (32-bit) laptop.
Once it connects, I can turn the firewall back on and everything works fine. New and changed items will continue to sync until the Fuze is disconnected from laptop.
You may have already checked this and/or things may be different with XP and AS, but since I didn't specifically see it in the post, I thought I would throw it out there.

Bad cable???
I decided to try a different mini-usb cable and it worked.
Here is what is strange though - the bad cable:
1. Still charges the phone when connected to a PC
2. Works fine with my external 500gig USB hard drive (which also is powered via the cable)
3. ...but no computers see the phone with this cable - or see it as a storage device.
Because of #1 and #2 above - I assumed the cable must be good. I had another cable so I figured I'd give it a shot - and sure enough with this cable it works with all the computers.
I guess there must be one bad pin or something with the cable - or something??? Guess it must use different ones than the external hard-drive apparently.
Oh well - at least it works and rather it be a $2 cable than my $200 phone...hahaha
Thanks everyone for the suggestions....

For what it's worth if anyone stumbles across this post in the future, I had a similar issue happen where it would bring up the usb menu on my fuze when you plug it in, but the computer wouldn't see it.
I had recently swapped the display/touchscreen, and it was one of the strips of metal ground/shielding tape inside the thing being mispositioned that did it.
Put it back together with everything in the right place and boom! works.
If you've taken the phone apart, those pieces of shielding tape are very important to get back exactly like they were, I've also seen lcd issues from it.