Database Info

Dutty Latest WM6.1 Bluetooth Activesync

I have installed the latest ROM from Dutty.
I have re-installed everything and paired with BT headset. Using Voice Command with headset no problem.
What I have not been able to figure out is to get Activesync working thru bluetooth. I have it paired with my laptop put it only gives me the option for Dial up networking for services.
Everything else is working better than ever and this ROM makes me appreciate my Tilt even more.
Any suggestions?

I suggest you post this question in his latest ROM thread. That is a more appropriate place to post this questions.
good luck.

Anybody have any suggestions on this issue.
This is the only thing I have not working. Just fixed VC1.6 Call announce.
Any help would be great.

To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.

TerraNocuus said:
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
Click to expand...
Click to collapse
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks

cephus6 said:
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
Click to expand...
Click to collapse
make sure that activesync is set to the com port that you have defined as an incoming com port for you bluetooth (on the pc, not the phone). how to do this.......it all depends on what bluetooth stack you are using.

Finally got it.
The COM port matched in ActiveSync, but I discovered the bluetooth on my laptop would not delete my old version phone. It said it deleted, delete, close, reopen and it would reappear. Once I killed that everything worked like a charm.
Thanks for everyone's help and thank you Dutty for your work.

HOW to USE ActiveSync over BT with Toshiba stack

I found this by googling, and successfully connected to my Vista Laptop.
Here it is solution:
Firstly, on your host machine, open Regedit and navigate to:
HKLM\Software\Microsoft\Windows CE Services\SerialPort
and change the value from Bluetooth to your incoming bluetooth COM port. Normally this is COM7 if you are using v5 of the Toshiba Bluetooth Stack (the Vista compatible version). Change the value to "COM7" (without the quotes).
You will need to restart your machine.
Now pair your Windows Mobile device with your host machine. You should see the ActiveSync service listed. If you've previously paired your device, then you would have seen "Serial Port" listed as a service (which isn't enough to get ActiveSync working). Instead go into the properties of the bluetooth device and select "refresh" to get an updated list of services that your host PC is advertising. ActiveSync should now be an option. Select it. Now, when using ActiveSync on your WM device, Connect via Bluetooth should work just fine.

I found second better solution. Then you can use Windows SideShow as well.
1. Uninstall Toshiba BT stack.
2. Go to Dev Mgmt.
3. Find Unknown device
4. Update driver
5. List all drivers
6. Find Cambridge manufacturer
7. install Generic Radio
Thats all.

I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.

pa3x said:
I found second better solution. Then you can use Windows SideShow as well.
Click to expand...
Click to collapse
Dude! You're my hero!

pa3x said:
I found second better solution. Then you can use Windows SideShow as well.
1. Uninstall Toshiba BT stack.
2. Go to Dev Mgmt.
3. Find Unknown device
4. Update driver
5. List all drivers
6. Find Cambridge manufacturer
7. install Generic Radio
Thats all.
Click to expand...
Click to collapse
Thank YOU!!!!

pa3x said:
I found second better solution. Then you can use Windows SideShow as well.
1. Uninstall Toshiba BT stack.
2. Go to Dev Mgmt.
3. Find Unknown device
4. Update driver
5. List all drivers
6. Find Cambridge manufacturer
7. install Generic Radio
Thats all.
Click to expand...
Click to collapse
Plz elaborate as where to perform it?
i have i-mate JASJAR will it help to connect it to a desktop pc inwhich i dunt wanna use wire/cable connection USB???
am on WM 6.1
with Bluesoleil V6 Bluetooth Dongle on Desktop PC.

ActiveSync via BT on Vista with 2125?

Has anyone been able to get ActiveSync to work over Bluetooth in Vista with a 2125? Which English ROM will I have the best of luck with as my USB Bluetooth on my desktop computer running vista ultimate x86 keeps telling me that my phone doesnt support activesync over bluetooth.
Also where can I get the Stock Cingular ROM for my 2125?
Can anyone point to to a guide on how to set it up?
any ideas?
many thanks,
SG

No one has because you dont need Active Sync in Vista, Vista comes preloaded with Windows Mobile Device Centre

Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?

SomeGuy2008 said:
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
Click to expand...
Click to collapse
Have you done a wired sync with that computer before? If not, you should do it. I've read that in the past. It fixed a sync problem with one of my phones, however, I've done it w/o too and it works. Have you created a BT Partnership between your computer and your phone? When you create the partnership, click on Advanced, re-confirm the PC name, then on the Services Window, checkmark Active sync. Then open active sync on phone, and click on right menu and chose Connect via BT. It should work. Good Luck!
EDIT: The partnership has to be created from the phone, not from the PC. If created from the PC, as far as my experience, it'll create a Modem Dialup connection partnership that will allow the PC to connect to the internet via BT using Wap connection on your phone. If you do want to create that too, use *99# as the dialup phone number. Leave blank the User name and PW.

Thanks for the reply.
When I try to setup a partnership from the phone I see my computer but I only see 3 service. Stereo somthing, handsfree, and something else but none of which are active sync. Yet when I look on my computer I see that activesync is in the list and selected.
I have a IOGear BT211 (Broadcom 2045) USB Dongle running in Vista Ultimate SP1.
Could it be my BT211 Driver? I have the latest version 5.1.x
Thanks,

Well the new phone I bought has all the drivers for Vista on CD. But its installed on my son's Laptop and he don't let daddy get nearby his toys LOL so, I really couldn't help more. I do know active sync works over BT with Vista. So I guess you'll have to keep trying. Do you have any instalation CD for your phone? From what I remember, if you don't have the "Outlook" that comes with the phone instalation, you might not be able to. I remember it didn't work untill we installed the one on the phone CD. All though, his Laptop had MS Office already installed. So... take a look around that.

My Bad. I had the wrong Window drivers installed for my BT on my desktop. LOL. Who would have though that the Windows XP drivers wouldnt work under Vista? lol
Thanks for the help.
GD

activesync (Windows Mobile Device Center) via bluetooth on Vista
I went through a similarly difficult experience with a Lenovo laptop. I blogged about it here:
http://mitchwyle.blogspot.com/2008/11/activesync-via-bluetooth.html

wierd problem

hello my htc touch pro does not connect with activesync but the phone works perfectly

usb?
bluetooth?
tried other usb ports if usb ?
tried another computer?

yes i have tryed all tha no differance it will not work with active synce i tryed a hard restaand all what i could think of

1. check the manual
2. get newest activesync from microsoft
3. check settings (connection - usb to pc)
4. keep in mind, that it does not work with vista (at least it's not that easy)
5. if all that does not help, google or post again... we should find a solution

Also, do you synch another phone on this same computer? XP/winmo hasn't previously allowed synching two mobile devices. However i see they are offering a mobile "suite" that will help with this. (at winmo site).
When i first got my fuze i went thru this very same thing. Because my kaiser was already being used on the same computer.

yeah my kasier syncs fine

You should backup your data and upgrade your ROM. Which one are you using now? My experiences says it may solve a lot of troubles...

had this same problem a while back. make sure you don't have activesync on your computer looking for the old partnership and try going to settings>connections(tab)>USB to PC and unchecking "enable advanced network functionality" or if that is unchecked, try re-checking it.

*SOLVED* ActiveSync via Bluetooth? NO COM PORT CHOICES?

Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0

I usually only get it to work if there's a partnership established already. Meaning you should first connect it by wire, do an initial sync, and then try using bluetooth.

malloy0 said:
Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0
Click to expand...
Click to collapse
zzattack, others...
Well...it took me almost all night, but I learned aha! that the devices were NOT paired, when they are and ONLY WHEN THEY ARE, do you have the option to set an OUTGOING PORT. so I got it to work, frankly, this should be easier than it is. Now, with this said the AS connection is very, very tempermental in that
1. I stop syncing,
2. leave my office, with my phone / PDA with me,
3. return and reconnect via BT, then
4. activate sync from the phone / PDA AS, via the Connect via Bluetooth
5. I get the SET UP AN AS PARTNERSHIP and say YES then I can resync
6. Again too, too funky, but at least no USB cord
7. In the end I wil give this sync method a whirl and see how it goes.
Thanks!!
malloy0

THread moved to Q&A

Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select t create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
Make sure you are initiating the pairing from the ppc, and always initiate the sync from the ppc.