Ok I am no newbie to this, but I am sick of the frustration that comes with this problem. I've had me TC for a couple months now and it will not be recognized with my PC. I've had this problem before.... deleting the partnership, changing the USB ports and settings, downloading the newest sync software, and shutting down the fire wall, yet nothing works. The only thing I can do is use Bluetooth, which is to slow to transfer files. I need some help here, because even backing up everything on the phone and doing a hard reset takes too long to restore what I have on it now.
try to unmark ->settings->connections->usbtoPC-> enhanced network functions.
sorry, i have a german one, so look for that function.
I have the same problem with my o2 xda orbit 2.
I found that if I turned off the bluetooth and wifi it connected ok but even that seems to have stopped working now.
I got it back
I shut off the windows firewall with Vista and it works every time now. This is odd since I always had it on before and never made a change to the settings. In fact once I had given permission for windows mobile center to run with the security I never had this problem before. All I can say is it is a serious pain to disable it every time I want to access my files on the phone.
the joys of activesync......
I'm running XP-Pro on both my home and desktop PC's
with my orbit 2 I have no problem connecting at home, but failed miserably at work (other than the first time after I'd installed activesync).
I'd concluded that it was my firewall settings (which are outside of my authority to alter) we're the cause of the problem and gave up.
What usually happens is an activesync connection is established (I alway click on cancel in the first box - because I don't want to sync files etc, just to be able to explore and install software), and then when I click on explore (after it says connected) it just hangs for a minutes or so, before disconnecting.
However, I hooked up my Orbit2 to my laptop in my hotel last night (to charge) and I noticed that I could explore. OK I thought, it was the firewall.
But then today I tried exactly the same thing, and we're back to the non communicating version.
Any ideas,
Any ways to force activesync into submission - even if just at the explore level?
Thanks
simple joys
Well Vista doesn't use active sync, but I'll try to give you what I have learned. First it always helps to have the latest version of the software. I'd delete active sync from the computer and end the partnership on the phone. The phone then says to hook it up with a computer to establish a connection. Before you do restart both. Download newest version from windowsmobile, install and restart again. Disable firewall and any antivirus ( it makes a difference ) and try to establish the new partnership. If that doesn't work sometimes the comm ports are wrong and you have to find out which your phone uses. Once I had a Moto Q9h unbranded that would not sync with USB no matter what I did from the start, but it would work with a bluetooth sync. That was the worst speed ever. Anyway Good Luck.
Thanks,
yes I am using the latest (for XP) active sync.
I also uninstalled it / re-installed it
I also deleted the profile
All to no avail
Virus / Firewall settings are locked on this laptop.
Same problem
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.
no sync with xp and vista
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...
swatguard said:
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.
Click to expand...
Click to collapse
You said you updated active sync, but Vista doesn't use that program. You need to use Windows mobile device center. If you go to windowsmobile.com there is an update you can download that you install with the phone connected. That might work.
nooms said:
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...
Click to expand...
Click to collapse
You have to delete every time, because once it is synced with one computer it establishes a relationship with that pc or laptop. The two operating systems use two different programs, but really the computers should have the partnership saved. I'm not sure if the phone can have two as well though.
Related
I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!
I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?
Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard
japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....
Hi all
i have a problem.
its not related to only one pc but all windows xp machines ive used ( im not going down vista route at all).
nearly everytime i connect my phone/ppc to windows, it crashes, ie, i get the windows 32 process host or something has an error then the RAPC window with 1 minute countdown comes on and my computer crashes or restarts.
then if i connect my ppc, its fine.
its not only with 1 pocket pc, its with the 2-3 ive tried.
they all run windows mobile 6 or 6.1...
anybody have the same problem and know what to do? activesync 4.5, u can see the icon connecting and it has made the noise its found the pocket pc, then bam...
i couldnt find this topic anywhere in xda, dont know where else to look
Cheers
It is not the PPC's at all - rather incompatible hardware on your desktop, such as an installed dial-up modem or other network device.
I had similar difficulties back in time on a Dell desktop until I removed a special DS Sound Card. A friend of mine had similar problems until he removed - following my recommendation - his dial-up modem card.
You will have to figure out what device on your desktop causes this incompatibility - please: before plugging out anything, remove the installed drivers first!
oh man. they are both laptops. thats going to be tough to remove something/uninstall drivers - doable but its going to annoy me everytime i log in
Hmmm,
try running your pc in save mode and run only what is needed for ActiveSync to work - not a nice solution but at least you can determine if this is an incompatibility issue or not.
Well I've spent the last two days searching high and low and nothing I've read has been the solution.
I have a HTC Tilt with PDACorner 16(WM 6.1) and when I connect to usb the phone will say connecting, authenticating user, then user authenticated and display that it is connected however WMDC will say not connected. Below are the steps i've taken. I do not use MS onecare.
I added all the appropriate ports to my firewall
on the computer:
disabled the firewall altogether
disabled antivirus(symantec endpoint protection)
disabled windows defender
removed the driver, updated the driver, reinstalled the driver
on the phone:
disabled advanced usb connection(on my phone its labeled as fast usb syncing, without this disabled the phone wont connect at all)
re-flashed the device
finally, I have synced the phone with other vista machines and xp machines which worked flawlessly.
I cant figure out what I am missing, any help would be very much appreciated! I swear I've searched this forum and all of google high and low and none of the solutions have worked for me.
edit: i forgot to add that the usb connection that I am getting now is good enough that the RUU program has no problem running and flashing a rom its just WMDC which will not connect with the phone
Try updating your version of WMDC....
I found I needed to upgrade to get my Omnia to sync.
Asphyx said:
Try updating your version of WMDC....
I found I needed to upgrade to get my Omnia to sync.
Click to expand...
Click to collapse
thanks, but i also updated to the newest version of WMDC
bump! has anyone had this problem?
Hope this helps: http://forum.xda-developers.com/showthread.php?t=313001
hello my htc touch pro does not connect with activesync but the phone works perfectly
usb?
bluetooth?
tried other usb ports if usb ?
tried another computer?
yes i have tryed all tha no differance it will not work with active synce i tryed a hard restaand all what i could think of
1. check the manual
2. get newest activesync from microsoft
3. check settings (connection - usb to pc)
4. keep in mind, that it does not work with vista (at least it's not that easy)
5. if all that does not help, google or post again... we should find a solution
Also, do you synch another phone on this same computer? XP/winmo hasn't previously allowed synching two mobile devices. However i see they are offering a mobile "suite" that will help with this. (at winmo site).
When i first got my fuze i went thru this very same thing. Because my kaiser was already being used on the same computer.
yeah my kasier syncs fine
You should backup your data and upgrade your ROM. Which one are you using now? My experiences says it may solve a lot of troubles...
had this same problem a while back. make sure you don't have activesync on your computer looking for the old partnership and try going to settings>connections(tab)>USB to PC and unchecking "enable advanced network functionality" or if that is unchecked, try re-checking it.
Hi:
I have a Fuze I have been using for several months. At some point it stopped connecting via USB to Active Sync. I was still able to sync via bluetooth.
Since the official ATT ROM is about to be released I decided to troubleshoot the USB/ActiveSync problem.
Well, I checked all connections, deleted and reinstalled partnership, tried different cables, different USB ports, uninstalled and reinstalled ActiveSync, unchecked the advanced network functionality box, turned Firewall on and off. Other usb devices are working fine, and I am able to connect the phone as storage/file transfer, just not ActiveSync.
I have searched and searched, and tried everything I can find, but now after so much messing with it, I am unable to connect to ActiveSync at all. When I try to pair it via bluetooth to my phone ActiveSync doesn't even show up as a service anymore.
When I connect via usb, I get the same error unable to establish a connection, and it suggests I check my Firewall.
I have added ActiveSync to my Firewall etc..., as well as completely disabling my Firewall. Still nothing. I have tried all the steps suggested by ZoneAlarm.
I am using Windows XP, ZoneAlarm Security Suite 8.0.298.035.
ANY ideas would really, really be appreciated.
Thanks!
Activesync is one of M$'s WORST inventions! Before WM6, The only way to connect your computer was via activesync (there was no "drive" option that i knew of)
I HATE activsync, never have gotten it to work. Thank GOD Google sync is around, sync up my contacts and calendar over the air.
Honestly, I'd say avoid activsync at all costs. But one other option MAY be to create a new user account on your computer and try activsync with that user.
I could also say ditch windows for ubuntu, but i have yet to find any easy way to sync my Fuze with ubuntu
Hi Cass:
Thanks for the reply. Well creating a new user did enable me to once again sync via bluetooth, but still no luck with the usb connection
Is it possible to install a ROM update via bluetooth?
Thanks!
i am not expert and I have not had that problem wth my fuze, but have you tried doing a hard reset?
cincy1020 said:
Hi:
I have a Fuze I have been using for several months. At some point it stopped connecting via USB to Active Sync. I was still able to sync via bluetooth.
Since the official ATT ROM is about to be released I decided to troubleshoot the USB/ActiveSync problem.
Well, I checked all connections, deleted and reinstalled partnership, tried different cables, different USB ports, uninstalled and reinstalled ActiveSync, unchecked the advanced network functionality box, turned Firewall on and off. Other usb devices are working fine, and I am able to connect the phone as storage/file transfer, just not ActiveSync.
I have searched and searched, and tried everything I can find, but now after so much messing with it, I am unable to connect to ActiveSync at all. When I try to pair it via bluetooth to my phone ActiveSync doesn't even show up as a service anymore.
When I connect via usb, I get the same error unable to establish a connection, and it suggests I check my Firewall.
I have added ActiveSync to my Firewall etc..., as well as completely disabling my Firewall. Still nothing. I have tried all the steps suggested by ZoneAlarm.
I am using Windows XP, ZoneAlarm Security Suite 8.0.298.035.
ANY ideas would really, really be appreciated.
Thanks!
Click to expand...
Click to collapse
uninstall activesync, reboot,make sure activesync files were deleted, reinstall activesync, turn the firewall off (for testing purposes), (turn off MS firewall service in services) and try to reconnect then.
Need a little more information in order to help you. Information that would help is:
- Version of Operating System Service Pack
- Version of Active Sync
- Anti-Virus software
In the interim; can I assume that these KB articles did not help?
http://support.microsoft.com/kb/915152/en-us
http://support.microsoft.com/kb/912240/en-us
I've run into similar issues with other USB devices; and the solution is usually one of two:
1) Too many USB device entries
When a device is not connected to the PC, it doesn't display in the Device Manager. To display those hidden devices, follow the steps in this KB article:
http://support.microsoft.com/kb/241257/en-us
Once the hidden devices are displayed (usually semi-transparent looking) you can right-click on each one and remove it. If you see any hidden devices with an Exclamation, you need to remove those as well.
For the moment, keep to USB related devices - in other words, don't go removal happy ... some hidden devices are meant to be there.
2) Driver Signing
It's also possible that you have a driver signing issue. You can temporarily disable driver signing by right-clicking on My Computer and selecting Properties ... the option is found on the Hardware tab.
Don't leave it permanently disabled; set it Warn, at the very least, to avoid malicious installation of Trojan or other similar programs.
HTH,
You don't need activesync to install a ROM from the computer. Hold the power, volume down button, and press the reset button with your stylus. This will take you into bootloader mode. Keep holding the buttons after pressing the reset button until the tricolor screen comes up. Then plug the phone into the computer. It should say "USB" at the bottom, which shows that it is connected to the computer. Then flash away.
You can try it out and let us know if it works. Just soft reset after you confirm it works.
You could also flash via SD card, but that's more work and requires unlocking phone.
Thank you all so much!
I have not been able to try any of your suggestions, because I had an unexpected work issue arise, but I will definitely try then within the next couple days, and report back here.
Thanks again!
I have problems syncing with WMDC and my Fuze. When it becomes persistent, I end the partnership, uninstall WMDC, and then reinstall it. It then works for a while.
studentjunk said:
You don't need activesync to install a ROM from the computer. Hold the power, volume down button, and press the reset button with your stylus. This will take you into bootloader mode. Keep holding the buttons after pressing the reset button until the tricolor screen comes up. Then plug the phone into the computer. It should say "USB" at the bottom, which shows that it is connected to the computer. Then flash away.
You can try it out and let us know if it works. Just soft reset after you confirm it works.
You could also flash via SD card, but that's more work and requires unlocking phone.
Click to expand...
Click to collapse
Junk:
You are my hero!! Your advice worked perfectly. I was able to update to the new ROM without using ActiveSync.
Thanks so much!!
And thanks to those of you who replied. I didn't try the other suggestions, since Junk's worked perfectly for me.