Since upgrading to AS 4.5, I can no longer install applications on my htc Touch.
The error message reads:
"Application Manager cannot intall this application on your mobile device due to an error in the setup file. Reinstall and try again"
Happens with all .exe files and I have re-installed AS4.5 several times and tried "Repair".
Don't think it's an issue with programs that weren't designed for WM6 because I can't install the Sprite and spbGPRS programs from the htcTouch CD
I'm running XP Home SP2 and log on with Administrator privilages
The files install OK on my work PC which runs XP2 Prof SP2 with no Administrator privilages.
Any ideas anybody?
Anybody else...
...having this problem?
http://support.microsoft.com/kb/256020
http://www.google.com/search?source...an+error+in+the+setup+file&btnG=Google+Search
maybe
Been there, done that
no answers anywhere I can see.
The Microsoft site only applies to specific programs, like the Media Player one you pointed to or Powerpoint.
Only thing I can find is possibly the .ini file doesn't have the correct version notation for instance it states version 1 instead of version 1.0
That still doesn't explain why they all install on the PC at work though.
Both PCs running AS4.5, both running Windows XP
i dont really thing activesycn is good at cleaning up after itself when reinstalled and or uninstalled
i've seen lots of files in it's dir
and lots of registrys it leave behind
a good cause would go and hunt them down and make sure
that a reinstall is really a reinstall
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help
hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (
do not use olydb
just when the healthy ppc restarted replace it with zick quickly.
use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..
What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!
Hi all,
During synchronising my HTC Hermes 300 (T-mobile MDA Vario II) with PC I lost an important excel file. The empty folder on the laptop overwrote the PDA.
Is there any possibility to recover this file?
1. Is there any PPC recovery software for this?
2. Is there any software that makes it possible to see my PDA as a drive? (own memory of the PDA, not the extended memory card.) This would also help as I could use the recovery software on my PC and check the PDA as I check a drive.
thanks
you can use nueMassStorage and scan your rom using Active Recovery 7
Thanks for your quick reply. I try to do it but I have got a small problem with using nueMassStorage When I install it, USB - PC disappears from Start - Setting - Connection, so I cannot set it to MassStorage.
I restarted the PDA many times, but nothing changed. After removing MassStorage, USB - PC comes back.
How to go on?
hi , AS ABOVE.
i've tried to read all the possible solution and tried it out already
change the host file , try changing the regedit method , tried using device manager to troubleshoot the device driver.
it just cant work. im doing the correct steps . i even flash wp7 again to double confirm my steps.
i have my key already , im just lacking this step to proceed further.
help ? :/
HELP ??
The instructions you can find here are all pretty clear and they work.
I went according to this one:
1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;
You are probably just missing a step
you must be doing something wrong ..cause as i just stated above all the tool and unlocker still works as it did 3 months ago...check some of tutorials in the forum...
http://forum.xda-developers.com/showthread.php?t=916497
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
lionhart1001987 said:
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
Click to expand...
Click to collapse
hi , i connected my phone using wpconnect , im still having same problem
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
I cant remember where I read this but it helped.After completing the above instructions,Open task manager(Ctrl ,Alt &del).Go to processes ,select zune launcher and click on end process.reboot pc ,connect phone , wait for it to sync wit zune ,if it doesnt ,run zune then run chevron and you are done.I did this for 3 phones and it worked.hope this helps.good luck.
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
hi , im sure ive done all the steps above .
like i mention , im not those ask before looking through thread.
yes it was not guest r/s with phone - zune .
i sync first before doing it and the r/s was not in guest.
regedit.exe was use to change the registry key before all. any other alternative ?
what kind of machine and os are you using?
jasontac said:
what kind of machine and os are you using?
Click to expand...
Click to collapse
window vista 32bit enterprise and home edition
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
how do you ensure that it is not GUEST?
i seem to be unable to get it to sync with ZUNE
Wow... you can come and work on our helpdesk any time, they log calls about as badly as you explain a problem lol.
You've said it's "not working". Why isn't it working? Where are you getting up to? Are you getting an error message?
Have you deleted all entries of Developerservices... from your host file?
make sure you have corrected date and time
and if possible use SIM Card with "big operator" in your country (well known operator)
sorry for bad english, using google translate
Host File?
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
What Do I Do In This Case?
I gave up with it am not thick had my previous Android phone with root and was loading new roms on daily but just won't work with this get the same thing over and over,
Sorry I'm having trouble communicating etc etc.
Please make sure its connected using USB ( yes it is)
Please start the Zune application ( its open and running)
No matter what I try resetting phone it would never work so thought bugger it what a load of crap, currently on the look out for a nice Android phone had my fill of this.
had sam problem, went and deleted
xx.xx.xx.xx developerservices.windowsphone.com
from host file, and now it works aging.
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
it does on mine... w7 ultimate... dont have to delete anything
Try to reset your phone. It worked for me.