Android have proplem with me - Touch Cruise Android Development

Dear All
I can't flash android in Polaris
1. I downlaod warm Donut from http://forum.xda-developers.com/showthread.php?t=619980
2. .bnh from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
3.and CustomRUU.exe
And I format SD-card FAT32,Copy androidinstall.tar under andboot folder,copy file .nbh to folder ROMUpdateUtility and rename file .nbh to ruu_signed.nbh
put in sd card to my phone(Polaris POLA100)
4.Boot Loader My phone
5.jeck in usb my phone
6.run ROMUpdateUtility.exe
When i flash complete 100% My Phone auto reboot,But My Phone still and show Smart mobility
Please help me I desired use Android in My polaris
Note: I unlock my phone complete
Thank you

kittipong said:
Dear All
I can't flash android in Polaris
1. I downlaod warm Donut from http://forum.xda-developers.com/showthread.php?t=619980
2. .bnh from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
3.and CustomRUU.exe
And I format SD-card FAT32,Copy androidinstall.tar under andboot folder,copy file .nbh to folder ROMUpdateUtility and rename file .nbh to ruu_signed.nbh
put in sd card to my phone(Polaris POLA100)
4.Boot Loader My phone
5.jeck in usb my phone
6.run ROMUpdateUtility.exe
When i flash complete 100% My Phone auto reboot,But My Phone still and show Smart mobility
Please help me I desired use Android in My polaris
Note: I unlock my phone complete
Thank you
Click to expand...
Click to collapse
It's OK that you unlocked your phone, but... did you install Hard SPL before the whole process? IT'S ESSENTIAL!

to SuperJMN for Help me
SuperJMN said:
It's OK that you unlocked your phone, but... did you install Hard SPL before the whole process? IT'S ESSENTIAL!
Click to expand...
Click to collapse
Thank SuperJMN
But I Unlock My pola before All Process flash Android

what nbh have you used?
Happend the same to me with the latest nbh from DZO.
This one: polaimg-panel1-320-08-04-10.nbh dont work for me, stuck at smart mobility.
Then I used an older one and voila! Android!

To frooggy
frooggy said:
what nbh have you used?
Happend the same to me with the latest nbh from DZO.
This one: polaimg-panel1-320-08-04-10.nbh dont work for me, stuck at smart mobility.
Then I used an older one and voila! Android!
Click to expand...
Click to collapse
Hi frooggy
I used nbh file polaimg-panel1-320-31-03-10.nbh same proplem But I try used nbh file polaimg-240x320-03-02-10.nbh and report again
and give knowledge me polaimg-panel1, polaimg-panel2 and polaimg-panel3 What Different

kittipong said:
Hi frooggy
I used nbh file polaimg-panel1-320-31-03-10.nbh same proplem But I try used nbh file polaimg-240x320-03-02-10.nbh and report again
and give knowledge me polaimg-panel1, polaimg-panel2 and polaimg-panel3 What Different
Click to expand...
Click to collapse
kittypong, you should try all the panels until it works nicely in your phone. Each device has an specific paneltype. One of the most common is the paneltype 1. Try to flash that one dated 20-February-2010 from here: http://sourceforge.net/projects/androidhtc/files/2010-02-20/polaris/
Are you following a guide to flash your device?

Please help me
Please can you help me ? What have I do when on my phone screen is still only "smart mobility". How can I flash back system ? Thanks.

cabaja said:
Please can you help me ? What have I do when on my phone screen is still only "smart mobility". How can I flash back system ? Thanks.
Click to expand...
Click to collapse
something is wrong with you flash....seach and do a sdcard flash with the original wm 6.1 rom

to SuperJMN
SuperJMN said:
kittypong, you should try all the panels until it works nicely in your phone. Each device has an specific paneltype. One of the most common is the paneltype 1. Try to flash that one dated 20-February-2010 from here: http://sourceforge.net/projects/androidhtc/files/2010-02-20/polaris/
Are you following a guide to flash your device?
Click to expand...
Click to collapse
Hi SuperJMN
I try nbh file POLAIMG-PANEL1-320.nbh work boot But My Phone Still Black Screen and not flash continue and Error message
init:Unable to open permisstent property directory /data/property errno:2
Now I Unlock
POLA100 MFG
Ver SPL-2.20.OliNex
CPLD-2
Please help me Thank you

kittipong said:
Hi SuperJMN
I try nbh file POLAIMG-PANEL1-320.nbh work boot But My Phone Still Black Screen and not flash continue and Error message
init:Unable to open permisstent property directory /data/property errno:2
Now I Unlock
POLA100 MFG
Ver SPL-2.20.OliNex
CPLD-2
Please help me Thank you
Click to expand...
Click to collapse
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.

i did the same thing, but i've a different problem: after "smart mobility" there are 2 pulses of vibration and the screen become black.
nothing else.
now, when i connect my phone to pc, the customruu doesn't work.
what can i do?

You need to flash from the spl tri colour screen,black screen usually the wrong panel .nbh

meknb said:
You need to flash from the spl tri colour screen,black screen usually the wrong panel .nbh
Click to expand...
Click to collapse
i forgot to say that i can't enter bootloder (pressing camera and soft reset)

Take the battery out then replace then power on and hold the cam button at the same time,i think that works.

meknb said:
Take the battery out then replace then power on and hold the cam button at the same time,i think that works.
Click to expand...
Click to collapse
ty everything works

to SuperJMN
SuperJMN said:
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.
Click to expand...
Click to collapse
Now i can't flash NAND,But when i remove card and find in card i have 2 file please help me

to SuperJMN
SuperJMN said:
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.
Click to expand...
Click to collapse
Now i can't NAND flash. But when i remove card find in card in card have 2 file you can help me

kittipong said:
...not flash continue and Error message
init: Unable to open permisstent property directory /data/property errno:2
...Please help me...
Click to expand...
Click to collapse
do not only "single press" to middle button...
you must keep pressing to middle button!

Related

Dead S100?, Did I kill it? HELP me plz...

I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...

Changing bootscreen (XDA Neo, G4)

Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it

Cook your splash screen

Btw, this is where I got the ability to cook my splash screen on my ROMs. You know the first bootscreen.
Here.
I don't speak Vietnamese, but it's pretty easy to figure out. If you don't understand me, tell me and I'll write a walkthrough. The pictures tell it all, though.
EDIT:
Things you need:
-Thay Doi_SplashScreen.
-NBH_Tool_v1.1.
-HTC_ROM_Tool.
Create a BMP or JPG that's 240x320.
Run Chạy Tool Replace SplashScreen.exe
Click Load Bitmap and choose your file.
Click Update Splash.
It will create the needed files where the BMP/JPG is currently stored.
Take the ruu_signed.nbh and use NBH_Tool_v1.1 to extract the PrimarySplash.nb that you can use with your ROM.
you should probably type it up anyway. hah
Thanks for the link, Ivan
Can someone upload the files, I cant read the site so I cant make a log in lol.
Thx
Write up
Hi,
I will try to write this up today as time allows.
How-To
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
ttran001 said:
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
Click to expand...
Click to collapse
Thanks Ttran!! I knew someone would step in and help me in my time of laziness.
Dumb Question
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
zcink said:
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
Click to expand...
Click to collapse
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
ttran001 said:
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
Click to expand...
Click to collapse
Okay got it. Will try it. Thanks.
by the way, thanks so much for using Megaupload and Not Rapidshare. Megaupload is by far the best.
I'm nervous about doing this but here goes.
Just one question. I put the PrimarySplash.nb in splash box and not system box -- right?
Please advise.
thanks. (I just don't want to brick my phone.)
Got it -- worked. You are a Genius.
Okay I did what I thought and it worked great. Thanks again!!!!!
yay for viets! (sorry gotta represent)
found this...not sure if you can do anything with it
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Haven't tested that, but it's probably for one of the other two startups. The first startup cannot be changed without flashing.
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Be nice if you could tweak this. Says ROM by Tom Condron. Nice graffics though. Uninstalled.
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
chris30_2001 said:
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
Click to expand...
Click to collapse
did you make the picture that you want for the flash screen ? Did you download the easy how to as well ???
Ok I am no noob .. Maybe im too tired or I missed something somewhere in all of this. So let me ask all the dumb questions and hopefully you can make this a sticky clearly explained. Lets start will all the directions 1 by 1 and hopefully 1 of you geniuses can clean it up then hopefully make a sticky .....
A.) Download all files needed. (assistance is more than welcomed here)
B.) get the picture you want to use for your splash screen.
(**Instructions written by ttran001**)
1. Copy the image you would like to use into the image folder.
2. Open up the Step 1 folder and run the Replace SplashScreen.exe file.
3. Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
4. Click on the Update Splash button.
The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up.
Leave it alone.
5. Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
6. Copy the RUU_singed.nbh and place it into the RUU_signed folder.
7. Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
8. Now go to the step 2 folder and double click on the nbhtool.exe.
9.This will open up Dutty's good NBH tool v1.1.
10. Click on the Decompile NBH file button.
11. Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
12. Choose the same location or the one of your choosing to save the extract files.
13. Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
OK we now have that part as easy as can be. Now the next parts for creating a nbh file.
Download and extract the HTC_ROM_Tool to your computer.
Double click on the htcrt.exe file to get started.
This new screen will popup.
Click on the Build! button.
On this screen click on the box under the Device: to select your device type.
Choose Herald
Type in your version of the rom, example: 4.10.531.3
Click on the box highlighted in red to choose your OS.nb file.
( Now where do we get this file from i would like that clarified and have it added to a download list for the sticky please.)
Click on the Build ROM botton.
This new screen will popup.
OK ... Now we have a nbh file... Now what would be the correct way of flashing this to a device. also the basic questions.
1.) Will this delete and or change my settings. ?
2.) What are the risks of flashing this way ?
3.) Does this work with HardSPL ?
4.) Does this work without HardSPL ?
5.) Must the picture be a bitmap ?
6.) Can I just use the ReplaceSplashScreen to just change the splash screen ?
7.) Does the program ReplaceSplashScreen work on wing before HardSPL or after or both ?
8.) Maybe im really tired how do I put pictures in this thread ... LOL ...
If I want to change the Windows Mobile splash also, do I change the name from "PrimarySplash" to "Secondary Splash"? or something? thanks.

Dawn Chorus - Feel better every day in 10 easy steps!

Hi all
Do you switch your HTC Kaiser on first thing in the morning? Are you fed up looking at some naff operator logo. Well, look no further. I've made a custom Splash Image sequence called "Dawn Chorus". It's designed to make you feel that little bit better in the morning. Here goes:
1) Copy "welcomehead.96.png" in "Dawn Chorus.zip" to the \Windows folder on your device. You may need to use a programme like Total Commander PPC.
2) Copy "animated.gif" in "Dawn Chorus.zip" to the "\Windows" folder as above.
3) You MUST have your device HARD SPL'ed. If you don't have Hard SPL installed then don't go any further!
4) Copy KAISIMG.nbh (in Dawn Chorus.zip attached) to the root of your Storage Card.
5) Completely power down your phone using long press power and selecting "Yes".
6) Press and hold the camera button and press the power button. Keep the camera button pressed until you see the tri-colour bootloader screen.
7) When prompted to, press the power button again to start the flash of the new splash screen.
8) Wait for the progress bar to go all the way over. After you have COMPLETED! SUCCESS! or something like that in blue writing on grey background soft-reset the device using the stylus in the hole method.
9) Enjoy your new splash screen and feel better every morning!
10) Delete KAISIMG.nbh from the root of your Storage Card.
Gorgeous
Gorgeous, been some great sunsets over the last few days.
Thanks.
Okay, have to be doing something wrong. Phone goes into bootloader, but no prompt to press power button
What am I doing wrong ? I followed all the steps, copied kaisimg onto my SD, camera power,bootloader, nothing.
hmmm
Well it works for me but never did get the green button holding the power and camera but held it till i got the tricolor screen and waited and restarted and all works ok for me . I have a great sun rise now
Thank you
Root of SD
denco7 said:
Okay, have to be doing something wrong. Phone goes into bootloader, but no prompt to press power button
What am I doing wrong ? I followed all the steps, copied kaisimg onto my SD, camera power,bootloader, nothing.
Click to expand...
Click to collapse
Hi
Did you place KAISIMG.nbh on the root of your SD card? Is your device security unlocked? If you can't get it to work, try SSPL. I don't know if that will work but it may be worth a try.
Cheers
andrew-in-woking
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
andrew-in-woking said:
Hi
Did you place KAISIMG.nbh on the root of your SD card? Is your device security unlocked? If you can't get it to work, try SSPL. I don't know if that will work but it may be worth a try.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Don't use SSPL.
SSPL is for flashing the SPL (Bootloader) on the device, nothing more.
@denco, you need a FAT32 formatted card, and sometimes some card's just don't work. Just flash it with the RUU.
Dave
denco7 said:
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
Click to expand...
Click to collapse
Why noy do it the noramal way with KaiserCustomRUU.exe and the .nhb via active sync?
Sorry i Dave was in the background... "great minds think alike"
Replace existing ROM/Radio image file in update package.
denco7 said:
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
Click to expand...
Click to collapse
Hi denco7
Yes, take a ROM/Radio update with any update file in and CustomRUU.exe. Rename KAISIMG.nbh to the same as the existng .nbh file in the folder and replace the existing update image file. Then just flash from desktop as usual.
Cheers
andrew-in-woking
Not sure if it's called "KAISIMG.nhb" on your device or was just a typo, but it's "KAISIMG.nBH, not "KAISIMG.nHB."
thanks for this ^^ normally i only reboot my kaiser if something went wrong
so your great startup screens really help me to calm down
btw. flashing via sd-card doesn't work for me.
renaming to RUU_signed.nbh and flashing using active synced worked fine
operative1 said:
thanks for this ^^ normally i only reboot my kaiser if something went wrong
so your great startup screens really help me to calm down
btw. flashing via sd-card doesn't work for me.
renaming to RUU_signed.nbh and flashing using active synced worked fine
Click to expand...
Click to collapse
FYI: The RUU will flash the first file it finds with an NBH extension in it's directory. No need to re-name, just place the RUU and and NBH in the same directory and it will flash
Dave
DaveShaw said:
Don't use SSPL.
SSPL is for flashing the SPL (Bootloader) on the device, nothing more.
@denco, you need a FAT32 formatted card, and sometimes some card's just don't work. Just flash it with the RUU.
Dave
Click to expand...
Click to collapse
Thanks, Dave
That was my first thought, that my card wasn't formatted right. Just wanted to make sure running RUU with KAISIMG would be alright.
EDIT: That worked, one question though, is it supposed to be animated ? Either way it is beautiful, thanks for this and the Neon theme, which I use all the time.

TD2 Splash Stock

I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
cyberdroxxx said:
I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
Click to expand...
Click to collapse
I only have it for the welcome head..the stock splash is dependant on your firmware 6.1 or 6.5..custom rom or stock rom.
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
cyberdroxxx said:
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
Click to expand...
Click to collapse
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Bruce Inman said:
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Click to expand...
Click to collapse
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Rename to TOPAIMG.nbh and place file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
McRIP said:
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Click to expand...
Click to collapse
I created yours for you.
Just follow flashing instructions.
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Place the .nbh file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
Click to expand...
Click to collapse
WOW! Mr. Bruce Inman thanks for this answer.
i ask for a glass of water and you give champaign
Bruce Inman said:
I created yours for you.
Just following flashing instructions.
Click to expand...
Click to collapse
thats very kind, thanks again.
Glad I could help.
Great work
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
Click to expand...
Click to collapse
how to make a file with exactly this size ?
Edit: Solved it was my error !!

Categories

Resources