Btw, this is where I got the ability to cook my splash screen on my ROMs. You know the first bootscreen.
Here.
I don't speak Vietnamese, but it's pretty easy to figure out. If you don't understand me, tell me and I'll write a walkthrough. The pictures tell it all, though.
EDIT:
Things you need:
-Thay Doi_SplashScreen.
-NBH_Tool_v1.1.
-HTC_ROM_Tool.
Create a BMP or JPG that's 240x320.
Run Chạy Tool Replace SplashScreen.exe
Click Load Bitmap and choose your file.
Click Update Splash.
It will create the needed files where the BMP/JPG is currently stored.
Take the ruu_signed.nbh and use NBH_Tool_v1.1 to extract the PrimarySplash.nb that you can use with your ROM.
you should probably type it up anyway. hah
Thanks for the link, Ivan
Can someone upload the files, I cant read the site so I cant make a log in lol.
Thx
Write up
Hi,
I will try to write this up today as time allows.
How-To
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
ttran001 said:
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
Click to expand...
Click to collapse
Thanks Ttran!! I knew someone would step in and help me in my time of laziness.
Dumb Question
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
zcink said:
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
Click to expand...
Click to collapse
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
ttran001 said:
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
Click to expand...
Click to collapse
Okay got it. Will try it. Thanks.
by the way, thanks so much for using Megaupload and Not Rapidshare. Megaupload is by far the best.
I'm nervous about doing this but here goes.
Just one question. I put the PrimarySplash.nb in splash box and not system box -- right?
Please advise.
thanks. (I just don't want to brick my phone.)
Got it -- worked. You are a Genius.
Okay I did what I thought and it worked great. Thanks again!!!!!
yay for viets! (sorry gotta represent)
found this...not sure if you can do anything with it
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Haven't tested that, but it's probably for one of the other two startups. The first startup cannot be changed without flashing.
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Be nice if you could tweak this. Says ROM by Tom Condron. Nice graffics though. Uninstalled.
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
chris30_2001 said:
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
Click to expand...
Click to collapse
did you make the picture that you want for the flash screen ? Did you download the easy how to as well ???
Ok I am no noob .. Maybe im too tired or I missed something somewhere in all of this. So let me ask all the dumb questions and hopefully you can make this a sticky clearly explained. Lets start will all the directions 1 by 1 and hopefully 1 of you geniuses can clean it up then hopefully make a sticky .....
A.) Download all files needed. (assistance is more than welcomed here)
B.) get the picture you want to use for your splash screen.
(**Instructions written by ttran001**)
1. Copy the image you would like to use into the image folder.
2. Open up the Step 1 folder and run the Replace SplashScreen.exe file.
3. Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
4. Click on the Update Splash button.
The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up.
Leave it alone.
5. Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
6. Copy the RUU_singed.nbh and place it into the RUU_signed folder.
7. Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
8. Now go to the step 2 folder and double click on the nbhtool.exe.
9.This will open up Dutty's good NBH tool v1.1.
10. Click on the Decompile NBH file button.
11. Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
12. Choose the same location or the one of your choosing to save the extract files.
13. Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
OK we now have that part as easy as can be. Now the next parts for creating a nbh file.
Download and extract the HTC_ROM_Tool to your computer.
Double click on the htcrt.exe file to get started.
This new screen will popup.
Click on the Build! button.
On this screen click on the box under the Device: to select your device type.
Choose Herald
Type in your version of the rom, example: 4.10.531.3
Click on the box highlighted in red to choose your OS.nb file.
( Now where do we get this file from i would like that clarified and have it added to a download list for the sticky please.)
Click on the Build ROM botton.
This new screen will popup.
OK ... Now we have a nbh file... Now what would be the correct way of flashing this to a device. also the basic questions.
1.) Will this delete and or change my settings. ?
2.) What are the risks of flashing this way ?
3.) Does this work with HardSPL ?
4.) Does this work without HardSPL ?
5.) Must the picture be a bitmap ?
6.) Can I just use the ReplaceSplashScreen to just change the splash screen ?
7.) Does the program ReplaceSplashScreen work on wing before HardSPL or after or both ?
8.) Maybe im really tired how do I put pictures in this thread ... LOL ...
If I want to change the Windows Mobile splash also, do I change the name from "PrimarySplash" to "Secondary Splash"? or something? thanks.
Related
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it
You never told anybody how to do it and then you complain of constant requests
I don't want to cook Wm6 I just want to change some files in my current WM5 Rom!
Could you please tell me how can I do it?
It does not need to be told how to do it, but told how to search ! A lot of people here know how to do it, just GOOGLE it !
sorry, I've already searched... Maybe I'm searching badly!
Could you please help me?
Basically you need to extract the ROM installer, you will find an nbf file in it, then get an NBF file converter, to convert it into some sort of editable format, then you start cooking the ROM, placing whatever you want, and in the end, convert it back into NBF
Hello,
You might find something useful here:
http://www.modaco.com/index.php?showtopic=255064
It would be more helpful if people genuinely try to help others instead of directing them to Google.
A
hey
if you can wait a day or two, i will write up a nice simple guide for everyone and have it stickied
i will also provide links to the tools required. it really isnt as difficult as some people thing! it just LOOKS difficult!
and we are a community here, so lets just help rather than-use the fricking search!lol. we were all n00bs once!
duke_stix said:
hey
if you can wait a day or two, i will write up a nice simple guide for everyone and have it stickied
i will also provide links to the tools required. it really isnt as difficult as some people thing! it just LOOKS difficult!
and we are a community here, so lets just help rather than-use the fricking search!lol. we were all n00bs once!
Click to expand...
Click to collapse
if all were like you ...
I know it isn't but in so much amount of infos it's not easy to find ones that apply to your device or even thing you wanna do!
Need help too
Yea, Please..my probs are the reconverting my data into a .nb->nbf file...after flashing My phone hangs in First Bootscreen...please help!Only Reflashing helps...i really want to cook a rom by myself.
Ive used THIS kitchen...but it is for Wizard-devices only....but i think,it can be used for Tornado,too.
as far as we tried we could not make a proper dump of the wm5 tornado...
but i did manage to build a rom kitchen with wm6 for the tornado...this was a whileago and the base rom is the same as the current available...if ther is enougth request i may be inclined to update the RK and release it.
to get you started here is some pointers.... you can use the same tools from the wizard, imgfs tools.
When I use nb2nbf_wizard.exe, is this created nk.nbf flashable for my Tornado (german XDA Phone aka HTC Douton)?
There is an nb2nbf_Tornado File out there,too, but my Phone stuck in first BootScreen.If i use the Wizard-Tools here and use the nb2nbf_Tornado,(by retyping the Start Adress from 8004000(for Wizard) to 8204000 (for Tornado)) it works well fine, Flashing works well,too,but stuck in first Screen every time.Ive only delete the Solitaire-Folder,but it dont work for me..maybe you have more luck!Or...faria may Post a RomKitchen exclusive for our lovely Tornado..
Have you removed the first two bytes of the initflashes.dat? When not, it can't be booting correctly! That was my mistake when I started to cook my own ROM's for my HTC Prophet (XDA Neo)!
What?
really?I may think,it is only needed after a Registryedit....thank you.!
edit:did not work...
arpy said:
There is an nb2nbf_Tornado File out there,too, but my Phone stuck in first BootScreen.If i use the Wizard-Tools here and use the nb2nbf_Tornado,(by retyping the Start Adress from 8004000(for Wizard) to 8204000 (for Tornado)) it works well fine, Flashing works well,too,but stuck in first Screen every time.Ive only delete the Solitaire-Folder,but it dont work for me..maybe you have more luck!Or...faria may Post a RomKitchen exclusive for our lovely Tornado..
Click to expand...
Click to collapse
i have the same problem like you.
I've made a nk.nbf from the *.nb files with nb2nbf_tornado.exe.
I've also extracted *.nb (OS, IPL, SPL, etc) from nk.nbf from windows mobile 6 alpha and then 'translated' those nb files with nb2nbf_tornado.exe. Same result: succesfull flash, stuck in first screen every time..
so not the "initflashes.dat" file is guilty..
...and nobody out there may help us?
arpy, it seems that if I include only OS without IPL & SPL in nb2nbf, all are OK..
But still with my modified OS does not get over the first splash screen.. maybe i've done smth wrong. In dump folder, I've added some files (some overwritten), i've removed some files, modified initflashfiles.dat (last line blank, + removed the two first bytes with winex), modified the hv files (saved in unicode standard, first line REGEDIT4, last line blank.. complied: no errors). replaced carrier_splash and shutdown
that's all what I've modified ...
edit:
arpy, try to translate only the OS module with nb2nbf_tornado. and tell me the result. also, tell me what changes you've made
edit2: found this: http://forum.xda-developers.com/showthread.php?t=298327 . improved tools
edit3: i've dumped my modified OS module with tadzio's ImgfsTools and discovered that initflashfiles.dat had the two bytes that i've removed with win hex.. what the?!
i've removed again, and run the whole build rom process again , but this time with tadzio's ImgfsTools.
Same result.. (stuck in first screen)
Maybe i've modified something wrong.
edit4: i've repeated the whole process and OS module flash and work ok . I haven't tried yet with all modules, only OS. I think I've made some mistakes when trying to replace drivers.
@DSF
Can you post a Step-By-Step Solution?I want to figure out my prob...which tools do you use?And how?May you Post your ROM?
well, i will post summary. i hope to release a "tornado romcook kitchen" and more detailed steps these days.
here is my OS module:
http://rapidshare.com/files/45915194/RUU.rar.html
right now i'm trying to figure out how to make the sd driver from iphone/other roms to work on my custom rom. every time i try other sd driver, i cannot view the card.
i'm using the tadzio's ImgfsTools (see link in my previous post).
steps:
- download typho5.exe, ImgfsTools, nb2nbf_tornado (you can get them by searching via gogole)
- copy all those files in the same folder, eg: ROMDEV
- copy nk.nbf in ROMDEV
Commands:
1) typho5.exe -x nk.nbf
2) imgfsfromnb.exe 82040000-OS.nb imgfs_raw_data.bin
3) imgfstodump.exe imgfs_raw_data.bin
Now the OS files are dumped in dump folder. Do the changes (delete, copy, modify, etc). When editing registry and initflashfiles.dat file, perform the important steps describeb at http://www.molski.biz/romcooking.html (turn off word wrap and use UNICODE in notepad, etc). If you're dune with those things do next:
4) imgfsfromdump imgfs_raw_data.bin imgfs_new.bin
5) imgfstonb imgfs_new.bin 82040000-OS.nb 82040000-OS_final.nb
if no error occured in the whole process, run 6) nb2nb_tornado.
There, chose the nb files, OS will be 82040000-OS_final.nb and not 82040000-OS.nb. Don't forget to use the correct image name. (eg: for 82040000-OS_final.nb chose OS)
The language, oem, operator version, cid can be left blank.
When you're done, press translate.
Copy the generated nk.nbf file in the rom update folder (RUU), execute ROMUpdateUtility.exe and follow the normal flash steps..
That's all.
Thanks to all those ppl that made this possible
PS: if you flash only the OS module (without IPL & SPL), even if the update proces crashes, you will not 'brick' your phone . Mine happen to crash on 2%.. i transpired instantly
kartam said:
You never told anybody how to do it and then you complain of constant requests
I don't want to cook Wm6 I just want to change some files in my current WM5 Rom!
Could you please tell me how can I do it?
Click to expand...
Click to collapse
Actually, I have some files about how to cook a rom, but they all Chinese, and may be useless for you.
DSF: the way you describe works with the tornado. thx. ive testest
an usefull app to edit initflashfiles.dat and the registry files is "notepad2".
I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
cyberdroxxx said:
I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
Click to expand...
Click to collapse
I only have it for the welcome head..the stock splash is dependant on your firmware 6.1 or 6.5..custom rom or stock rom.
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
cyberdroxxx said:
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
Click to expand...
Click to collapse
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Bruce Inman said:
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Click to expand...
Click to collapse
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Rename to TOPAIMG.nbh and place file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
McRIP said:
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Click to expand...
Click to collapse
I created yours for you.
Just follow flashing instructions.
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Place the .nbh file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
Click to expand...
Click to collapse
WOW! Mr. Bruce Inman thanks for this answer.
i ask for a glass of water and you give champaign
Bruce Inman said:
I created yours for you.
Just following flashing instructions.
Click to expand...
Click to collapse
thats very kind, thanks again.
Glad I could help.
Great work
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
Click to expand...
Click to collapse
how to make a file with exactly this size ?
Edit: Solved it was my error !!
*updated 2/2/2011*
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt. Also, HUGE thanks to Stoney 666 for giving me the software to convert images to .rgb565 and to CYBERxNUKE for creating it.
*Note*
all filenames in this process are case sensitive. Don't capitalize it if it's not capitalized and don't lower case it if it's not lowercase. Also, do not add extensions unless you're instructed to. Doing any of these can mess up the process.
**UPDATE 10/1/11**
Updated a working PC36IMG.zip (in the attachments in the bottom). The last one was corrupt and the Unrevoked website goes down sometimes.
**UPDATE 10/24/11**
Added up a pro tip for people who want to make their own Splash screens and not just make their own Splash PC36IMG.zip.
Okay, rewriting this process from scratch because, well it's easier that way.
PART 1 (if you downloaded a splash screen image from the Themes and Apps Section of the Evo forums in XDA, the proceed directly to PART 2).
1. Download the EVOSplash Zip from the attachments.
2. Open the howto.txt file inside for instructions on how to use it. With this program, you can convert a file into the required .rgb565 file.
3. Rename the converted .rgb565 file splash1.img
PART 2 (if you have your file all ready to go)
*note* if you have not done so, rename the splash picture to splash1.img
1. Go to this website: http://unrevoked.com/rootwiki/doku.php/public/forever
2. Download the original PC36IMG.zip file (it's close to the bottom)
3. Use a .zip editor (winzip, 7zip, etc) to open it.
*ehem* DO NOT EXTRACT, JUST OPEN
4. Replace the splash1.img in the zip with the one you have/just made. Save it.
5. Plug your phone in, connect to PC via disk drive.
6. Put the PC36IMG onto the root of your SD card (for newbies, that's the very first page of the SD card).
7. Reboot phone into bootloader (turn off, volume down + power)
8. The phone should recognize the zip and ask if you want to update. Select yes (I believe it's volume up for yes).
The zip will install and you're new splash screen should be there next time the phone reboots.
I hope this helps a lot and thanks to everyone who's read it and been patient. It took me a month to thread jumping before I found a process that worked with hboot 2.02 and 2.10 (I have 2.10). This is also the easiest way for people who are uncomfortable with adb and the command prompt.
Give me a thanks if it helped, I do this for free so I don't accept donations
**PRO TIP**
If you want it to fit the whole screen (or to make your own from scratch), use a photo or paint like program (Photoshop, etc). Make a new file that is 480 pixels wide and 800 pixels for height. Then re-size the picture you want to use in it (another tip: use a picture that is bigger than 480x800. If it's smaller, it'll get fuzzy and become lower quality) to fit the borders of the new file. Alternatively, you can make your own. Save as JPEG when you're done, then follow the instructions above.
Followed the process, it's not working for me. I don't get a prompt to update in hboot. PC36IMG.zip is on the root of my SD card. =/
EDIT: When I boot back into CM6 and look at the root of my SD card the .zip is gone...
EDIT2: Diagnosed and fixed, had to make the PC36IMG.zip rwx-rwx-rwx. Flashed just fine!
what about users with hboot 0.93.0000?
AbsolutZeroGI said:
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt.
Okay here we go. This process is to install custom splash screens without having to use the command prompt or fastboot. Users who have hboot 2.02 and 2.10 CANNOT use the command prompt anyway so this is the workaround for those people.
1. Download the PC36IMG.zip from the attachments.
2. Find the splash screen you want and rename it splash1.img (don't worry about any warnings about it not being usable, Android is smarter than Windows).
3. Open the .zip and delete the splash1.img that's already there and replace it with the one you downloaded.
4. Plug your phone in, select "disk drive".
5. Move the .zip file into the first page (or root page) of your sd card.
6. Remount sd card (not necessarily important, but recommended).
7. Power Down
8. Load into Hboot (volume down + power)
9. Hboot will recognize the .zip as an update and will ask if you want to install it, hit volume up to install.
10. Reboot and enjoy your new splash screen.
If this gets a sticky, so be it, if not, I am going to PM the OP of the sticky'd thread with all the splash screens and ask him if he'd put this guide in there.
I hope this helps some people, it sure helped me.
Click to expand...
Click to collapse
you forgot to mention that the image used for the splash needs to be in .rgb565 format before renaming it to splash1.img, and has to be saved as a 24bit rgb bmp or png file before converting to .rgb565.... use this to convert the images to .rgb565 View attachment EVOSplash.zip there is also a "how to" in the zip.
or to make your life easier, go here... http://forum.xda-developers.com/showthread.php?t=812572 and i'll make one for you...
Stoney 666 said:
you forgot to mention that the image used for the splash needs to be in .rgb565 format before renaming it to splash1.img, and has to be saved as a 24bit rgb bmp or png file before converting to .rgb565.... use this to convert the images to .rgb565 View attachment 481035 there is also a "how to" in the zip.
or to make your life easier, go here... http://forum.xda-developers.com/showthread.php?t=812572 and i'll make one for you...
Click to expand...
Click to collapse
Thanks, all the splash files i've downloaded so far have been in .rgb565 so far but this is definitely useful information, especially if people want to make their own.
meansixx said:
what about users with hboot 0.93.0000?
Click to expand...
Click to collapse
This is compatible with all hboots. It's just that people with the two newest ones can't use any other method (to my knowledge) except this one so I thought it was guide worthy. Most of the threads that have splash screens have alternate instructions.
*bump*
people still need this, I wish I could get it sticky'd
problem installing splash screen
I am having the same problem as above, I have read alot on this fourm and still cannot get a different splash screen up. Im looking to install the stock flash for the evo. I'm getting an error no image found please help.
Thanks...
I found
a flashable zip of the stock splash screen, and it worked, but I would still like to know how to do this. I wanted to put on the red evo skelton giving the finger.
pgagolfer said:
a flashable zip of the stock splash screen, and it worked, but I would still like to know how to do this. I wanted to put on the red evo skelton giving the finger.
Click to expand...
Click to collapse
When you add the image to the Evo, make sure it's in it's native resolution (my instructions only cover splash screens from this forum, which is 800x480).
For further info, read Stoney 666's post, that's how you do it if your image doesn't start in the right file type.
Thanks.
Got it to work, not sure how, i think i used a different PC36IMG file, or I took zip off the ending.
pgagolfer said:
Got it to work, not sure how, i think i used a different PC36IMG file, or I took zip off the ending.
Click to expand...
Click to collapse
Even if you take off the .zip it's still a zip so one way or the other it works I just uploaded the PC36IMG file I found on the Unrevoked website.
Glad you got it to work!
Ok, I'm not doing something right. I downloaded the PC36IMG.zip, opened it, replaced the file with the splash screen I wanted, and re-zipped the file. Put it on the root of my sd card, and started it in bootloader. First, it didn't prompt me to update, although when it checked the sd card for updates, I did note that it said "parsing PC36IMG.zip", but then returned to the menu. I tried flashing it from recovery as well and it didn't work.
From all the stuff I've read this seems to be the method that makes the most sense and is easiest. I've tried flashing it via ABD and a whole bunch of other stuff to no avail; my computer must not like my phone.
What am I doing wrong, I followed your steps...
EDIT: I rooted phone with unrevoked...don't know if that is why. I know that has been a roadblock with some of the other methods of changing the splash screen.
Any possible way to get this turned into a flashable zip file? Im not good with adb!
wizholt7 said:
Ok, I'm not doing something right. I downloaded the PC36IMG.zip, opened it, replaced the file with the splash screen I wanted, and re-zipped the file. Put it on the root of my sd card, and started it in bootloader. First, it didn't prompt me to update, although when it checked the sd card for updates, I did note that it said "parsing PC36IMG.zip", but then returned to the menu. I tried flashing it from recovery as well and it didn't work.
From all the stuff I've read this seems to be the method that makes the most sense and is easiest. I've tried flashing it via ABD and a whole bunch of other stuff to no avail; my computer must not like my phone.
What am I doing wrong, I followed your steps...
EDIT: I rooted phone with unrevoked...don't know if that is why. I know that has been a roadblock with some of the other methods of changing the splash screen.
Click to expand...
Click to collapse
For 1 you don't have to unzip and re-zip. Just replace the image that's already in the zip. I think a couple of people have had this problem before. I'd try again without re-zipping the package.
Also, if you didn't get the splash screen from this section of the forums (i.e. you're using your own or from a different phone in xda), go to post #4 (on the first page) and read stoney 666's post about converting the file to .rgb565 and then renaming it (not convert, rename) it to splash1.img (yes, with the file extension).
Basically, from where you are, here's what I'd do:
attempt to just replace the splash1.img file in the zip without unzipping and try again. Or, try downloading the original, untainted one here: http://unrevoked.com/rootwiki/doku.php/public/forever
and follow the steps over again.
if that doesn't work:
follow stoney 666's instructions and convert the image to .rgb565 format and then rename it to splash1.img.
That should do it.
I will also post that link in the OP and tell people to get the original instead of using mine as people have been having trouble with it.
luist4498 said:
Any possible way to get this turned into a flashable zip file? Im not good with adb!
Click to expand...
Click to collapse
I revised the instructions on the original post, it should work for you. It's not flashable in recovery, but it's flashable in bootloader which is just as good (don't need clockwork or ra recovery to do it).
I tried it again adding the file to the zip instead of unzipping, rezipping, and no dice. I'll download the PC36IMG file from unrevoke's website and see if that works.
EDIT: I just downloaded the one from unrevoked's website, and I noticed the image file it has in there by default is "splash1.img". The name of the file I am inserting is "evosplash1.rgb565". That is the correct file name, right?
Also, I just tried it with the file from unrevoked's website, still no luck. It just says "parsing PC36IMG" but doesn't do anything and returns to the bootloader options...
Ok, so I finally got it figured out, thanks to moseso. Apparently, it was because the name of the file was wrong. As I understood it, the file was to be named evosplash1.rgb565 . But I had to rename it to splash1.img . I guess it was a misunderstanding on my part, idk. But I got it now. Here is the link to the thread if anyone wants or needs it: http://forum.xda-developers.com/showthread.php?p=11113102#post11113102
wizholt7 said:
Ok, so I finally got it figured out, thanks to moseso. Apparently, it was because the name of the file was wrong. As I understood it, the file was to be named evosplash1.rgb565 . But I had to rename it to splash1.img . I guess it was a misunderstanding on my part, idk. But I got it now. Here is the link to the thread if anyone wants or needs it: http://forum.xda-developers.com/showthread.php?p=11113102#post11113102
Click to expand...
Click to collapse
It says in the OP to rename the file and always has.
Glad you got it figured out.
AbsolutZeroGI said:
*updated 2/2/2011*
First, props to silentstryder for putting up the process. I'm just giving it it's own thread for the newbies, users with the new hboots (2.02 and 2.10) and for people who just plain don't like command prompt. Also, HUGE thanks to Stoney 666 for providing the software to convert images to .rgb565.
*Note*
all filenames in this process are case sensitive. Don't capitalize it if it's not capitalized and don't lower case it if it's not lowercase. Also, do not add extensions unless you're instructed to. Doing any of these can mess up the process.
Okay, rewriting this process from scratch because, well it's easier that way.
PART 1 (if you downloaded a splash screen image from the Themes and Apps Section of the Evo forums in XDA, the proceed directly to PART 2).
1. Download the EVOSplash Zip from the attachments.
2. Open the howto.txt file inside for instructions on how to use it. With this program, you can convert a file into the required .rgb565 file.
3. Rename the converted .rgb565 file splash1.img
PART 2 (if you have your file all ready to go)
*note* if you have not done so, rename the splash picture to splash1.img
1. Go to this website: http://unrevoked.com/rootwiki/doku.php/public/forever
2. Download the original PC36IMG.zip file (it's close to the bottom)
3. Use a .zip editor (winzip, 7zip, etc) to open it.
*ehem* DO NOT EXTRACT, JUST OPEN
4. Replace the splash1.img in the zip with the one you have/just made. Save it.
5. Plug your phone in, connect to PC via disk drive.
6. Put the PC36IMG onto the root of your SD card (for newbies, that's the very first page of the SD card).
7. Reboot phone into bootloader (turn off, volume down + power)
8. The phone should recognize the zip and ask if you want to update. Select yes (I believe it's volume up for yes).
The zip will install and you're new splash screen should be there next time the phone reboots.
I hope this helps a lot and thanks to everyone who's read it and been patient. It took me a month to thread jumping before I found a process that worked with hboot 2.02 and 2.10 (I have 2.10). This is also the easiest way for people who are uncomfortable with adb and the command prompt.
Give me a thanks if it helped, I do this for free so I don't accept donations
Click to expand...
Click to collapse
maybe a really stupid question, as i can be known for those but i can be a worry wart. im using miui 1.8.5 on tiamat-evo 4.0.6 w/ sbc, and im just curious, is reflashing the stock pc36img.zip (after my file replacement, ofc) going to change ANYTHING else on my phone? been having a hell of a time keeping it running lately and i WANT to do this, but now im leery of EVERYTHING...