I haven't found a way to route all audio to my bluetooth earpiece.
I tried Audio Router cab but I did not succeed to get Garmin audio to my earpiece. It is little bit difficult to controll because of small icons (in HD2).
I think correct icon would be the left one?
Anybody could help me?
me too searching for an application that route audio to bluetooth...found one but not works on HD2.
Thanks in advance for any help.
Alex
Sorry, spamming, up up...
Hey guys... anybody else have similar problem? with skype, fring, garmin, tomtom????
I allready have changed bluetooth settings - Advanced - Audio - "Play system sounds on remote hands-free device". It did not affect anything for Garmin sounds... plz help!
Solved
I managed this (and now this seems work)...
Then I changed the following registry setting (see post #125):
- HKLM\Software\WIDCOMM\Plugin\HandsFree
- Change SupportedFeatures to 1085 (default was 1379)
I did that registry change and also "I allready have changed bluetooth settings - Advanced - Audio - "Play system sounds on remote hands-free device".
Now it works!
Related
Hi guys!
I am a little confused by all the names this little phone is called, so i hope this is correct thread.
I can connect the headset and listen to music using WMP. I can answer a call while i´m still listening to music(it pauses), but when it switches back to the player the sound is gone. All calls works but I can´t listen to my WMP. After a soft or hard reset i work again, until it rings again.
I´m using the tornado patch posted by kyunga and khuanchai(.reg import)
If someone know anything, please tell me...
//Johan
I have a ds-970, and I have tested motorola and nextlink spider bluetooth stereo headsets. The problem you are experiencing is specific to the ds970, moto and nextlink automaticallys switch back to wireless stereo after call. w/ ds970, only thing that I have found to fix this is to manually activate wireless stereo (comm manager, bluetooth settings) after a call. yeah, that is a pain.
Thanks for the info. Well, I was hoping that there would be some sort of adjustment in the .reg department.
You just can´t win em all.....
Edit: I found a solution... I tried Crossbow_Reloaded(WM6) and now it´s working... The sound is a little bit distorted in the upper freq. range though, but hey...you just can´t win em all
New version available!
See: http://forum.xda-developers.com/showthread.php?t=437726
Please comment there.
Older version:
EDIT: RC-2 is available
I've just uploaded version 1.0.rc-1 of the A2DP plugin. It can be downloaded and used as freeware (0 cost) from http://teksoftco.com/index.php?section=freeware , or find it below attached to this message, including a short usage guide.
New in this release (as many users requested):
-signal indicator
-3 modes for headset: OK, Off, Err
-settings panel added
-Handle Bluetooth option
-Execute File after start option
-applet added in start->settings->system to start settings
-a2dp.exe included in the package, that with parameters: a2dp.exe -bluetoothn|off -a2dpn|off or a2dp.exe -bluetooth:1|0 -a2dp:1|0
--------------------------
The devices that support A2DP (most wm6.0 bluetooth devices), come with 2 audio drivers installed:
1) The "Audio Output" Driver (supported since ppc 2002)
2) The "Bluetooth Advanced Audio Output" Driver, that is responsible of sending audio data over a L2CAP Bluetooth connection, as per A2DP protocol
When the user connects a Stereo A2DP headset, and selects the "Wireless Stereo" profile, the Bluetooth Adv. Audio Output becomes the nr. 1 audio output route, and is indexed as the First audio driver. Any application will output sound by using that driver.
The problem is that sometimes we are already listening to audio in the device's speakers, and then suddenly we want to switch the output to our a2dp headsets - this is sometimes problematic, as the First audio driver changes from "Audio Output" to "Bluetooth Adv. Audio Output" and the applications currently playing audio need to be restarted.
For such issues, I have provided a tool, as freeware, that will install as a today plugin and offer the user the possibility of instantly switching the audio between Device Speaker and A2DP Stereo Headset.
It is designed for WM6.0, Microsoft Bluetooth stack, please download it and let me know how it works for you. There are some more modifications that will be done, so this is only Beta-1
The CAB installer and instructions are in the ZIP attached.
(tested on ultimate 8150/wm6.0 and eten m600+/wm5.0, the gfx was made for vga but works on qvga too)
Feel free to post feedback here, or on the windows mobile development forum, address below.
great plugin! i wish there was a smartphone version for this too
oldsap said:
great plugin! i wish there was a smartphone version for this too
Click to expand...
Click to collapse
Will try to provide one these days. If only time was a disposable resource
Than you very much sir. will be looking forward to it
Thank you. Works ok with Wizard (WM6) and Siemens HHB 750.
This is the App that i am looking for, but for some reason i can't see the icon, since my HTC home doesn't show it.
Any clue?
hi
just installed the version on the teksoftco site.
first impressions -huge thank you; just what i've been looking for.
however i do have a wish and an observation
1. wish: when you tap on the bt symbol, can it turn on/off the bluetooth like on the commanger.
2 headset symbol seems to be always reading ok, even if headset off or bt turned off.
thanks
R.
another thought
any chance you can speak to Sleuth255
http://forum.xda-developers.com/showthread.php?t=284974&highlight=a2dp+cutting
he has a fix for the skipping when using a2dp.
this could be an option to enable/disable the fix when selecting the connect/stop on the today screen.
the advantage being when you disconnect you reduce the power drain.
(the fix uses a contiual loop which means the processor is working all the time)
thanks
1.0.RC-1 version added, first post edited, and new files uploaded
@tiga69 , will try to do that.
There was a little problem in identifying an A2DP device among other BT devices.
The previous post is updated with the new RC-2 version. Please re-download the CABs and reinstall this new version.
hi,
great tool ! thx
1 prob i have: when select "handle bluethooth automatically" and select a prog to start i.e mortplayer then at the first tap on "play" BT switchs on and mortplayer start. but the headphones are not set to wireless!
i have to minimize the mortplaye and click "play" again to set the headphone to wireless.
maybe a delay would help a little ???
cu
inteks
Hi,
I hope somebody can help with this. I've got a new pocket-pc phone with WM6 that says it's got A2DP built in but I cannot use my old bluetooth headsets with it for audio because it greys-out the audio device option.
My headsets (I have three) all work with my Universal using the A2DP patches. The sound is not perfect but acceptable for my purposes.
But nothing works on this new phone (Ubiquio 503g). I've checked all registry keys as well and they all seem to match the Tornado patch instructions.
What else can I try? Any help appreciated.
Thanks.
wovens said:
Hi,
I hope somebody can help with this. I've got a new pocket-pc phone with WM6 that says it's got A2DP built in but I cannot use my old bluetooth headsets with it for audio because it greys-out the audio device option.
My headsets (I have three) all work with my Universal using the A2DP patches. The sound is not perfect but acceptable for my purposes.
But nothing works on this new phone (Ubiquio 503g). I've checked all registry keys as well and they all seem to match the Tornado patch instructions.
What else can I try? Any help appreciated.
Thanks.
Click to expand...
Click to collapse
First, are you speaking of non-A2DP, mono headsets or A2DP, stereo headphones ?
Thanks for your answer. Yes, I am speaking of non-A2DP, mono headsets. Sorry I was not very clear on first post. That's what I mean. I've used these same headsets before with Uni and had sound of sorts from media players coming through it.
wovens said:
Thanks for your answer. Yes, I am speaking of non-A2DP, mono headsets. Sorry I was not very clear on first post. That's what I mean. I've used these same headsets before with Uni and had sound of sorts from media players coming through it.
Click to expand...
Click to collapse
Unfortunately, different models require different ghacks to do this as has also been explained in the Wiki (see http://wiki.xda-developers.com/inde...t using traditional (mono) Bluetooth headsets )
All in all, checkout the Wiki above
Thanks. I'll try the wiki and hope for the best.
_________________________
If anybody is interested, as my phone has Microsoft’s BT Stack, I’ve tried:
1)- Built in A2DP - option for bt audio greyed out.
2)- Tried with TP.com BTAudio.cab - it installs but sound is muted (or disappears in the ether) when I transfer sound to headset.
3)- Tried with 1Enable_A2DP.cab and 2Enable_A2DP.cab and the system say it cannot install them full stop.
4)- Tried with Tornado’s BTAudioToggle routine and registry changes - behaves the same as in option 2. (Realised after doing option 5 that it is same as BTAudio810)
5)- Read the wiki on http://wiki.xda-developers.com/index.php?pagename=TUTORIAL%3A%20Everything%20you%20need%20to%20know%20about%20using%20traditional%20%28mono%29%20Bluetooth%20headsets and discovered that I had tried most of the options there already.
6)- Did not try the “Teksoft’s Blue Music” yet, may give it a go later.
7)- and last, tried BTAudioNav with no luck either. (same behaviour as option 2).
I wanna cry!
= =
o)(o
'
'
'
Hi everyone,
I know there's much answers, threads, articles but I dont have clear in A2DP problem solution for Magician.
Is there any way to Set as Wireless Stereo my bluetooth stereo headphones?
I googled, search this forum for couple of days, but I cant find solution.
The one worked for me: "bchs_for_pocket_pc_ozone.armv4.cab" but nothing else. Worked like worked...
I didnt have clear sound in my headset and there is also tons of other sticky things (works just with WMP, unstable connection... ). Also there's just Set as Hands-free instead of Set as Wireless Stereo (or something like that).
Okay, music is streamed to heaphones, but I cannot use e.g. PocketMusic or Pocket Player and what's the top: when I want to have good (but still not clear) sound, I cant do anything with Magician while playing music, because every tap, every movement with scrollbar comes with lagging sound
Someone with similar problems?
Someone with solution???
Thx a lot for every response
I found particular solution. TCMP player. There's an option to change buffers and also a good equalizer (it have just one bug: when I turn it on, in music I hear little annoying-crispy sounds).
TCMP has also option to change number of output channels (stereo, stereo-swapped, mono join, mono left, mono right) + other things.
But I am still waiting for some advices, ideas...
Have a nice day
Hi All,
I currently use a TyTN and ready to buy a Raphael.
I use the "Destination Gotland Bluetooth Mono Sound" to redirect all sounds to my Samsung WEP 410 headset (essentially from my GPS program (IGO 8)).
I search everywhere but didn't find any equivalent for the HTC Raphael.
Can someone tell me if another program or feature exists on the Raphael to do this ?
This is very important for me as I use a very noisy car and I can't listen the GPS when I drive.
Many thanks.
Daniel.
Same thing?
I ran the same thing on my tytn. Did you find a sleeker solution than running an app before opening the music?
BTAudio toggle works. There's three files, Toggle, On and Off.