Related
Hi, I have read a lot about updating the BT stack to allow for A2DP on my PDA2, and especially a previous post (XDA2i - bluetooth stuff - newbie question) where the solution was to install the BroadcomCorporation BT-PPC AV.cab file. I did this and it does give me the High Quality Audio profile when bonding and the bonding process seems to work fine. However this results in no sound from my PDA, nor any from the headphones when playing audio! (which by the way are the Blueant BT headphones). Headset mode works fine still. I have tried all the different versions of the BT stack on the ftp site but no joy. Is there something else I need to do to get this working, and is this, maybe, a problem with the PH10D, but not PH10C ??
I am really stumped so any help, suggsetions or pointers greatly appreciated! Thanks.
Roger
hey guy,
I'm having problems getting this thing to work properly, i've searched and searched and can't seem to find anyone else with this problem:
Device pairs fine and seems to function perfectly as a handsfree, however, using media player the audio comes out of the phone even as the 'click' sound effects are coming out the headset! Can't seem to get any audio from media player or core player to come out the headset, the 'htc streaming media player' uses the headset but you can't open files etc using that.
I've tried with WM5 and WM6, same results.
Anyone faced this problem before?
Hi
I've just purchased this headset last week and am thoroughly impressed by it so far. There's not much info on it out there but theres a few characteristics I've found out about this headset; i wonder if you can help me confirm them.
- It seems like when you take the headset off your head it automatically turns off? at first I thought mine was faulty but this behaviour was quite consistent and I figured it was just a power saving feature.
- seems like it likes to turn by itself if idle quite fast.
- need to manually set the device as hands free for it to actually work as a hands free
- unable to use the mic when connecting to pc. I wanted to use it for my sip client on the pc but alas the microphone function doesn't register? What should I be doing to make this work?
In regards to your problem; I'll outline the steps I take to use mine.
1. turn on headset
2. turn on trinity bluetooth from comm manager
3. go to bluetooth settings from settings
4. touch and hold down the nokia bh501 item until the drop down menu appears ,then select "set as wireless audio" or similar
--> you should hear a sound, if you can hear this then it will work, if theres nothing
--> alternatively, select hands free if you want to use it as hands free!
5. open your favorite mp3's and it should work fine.
Does this work for you? Btw im using Mun's TE wm6 rom. What rom are u using?
Eureka!
Your post made me realise I had only tried the headset with AAC files and not MP3 and guess what? The headset only works with MP3 files! Although this is probably a limitation of the trinity.
I can also confirm it doesn't work with nerodigital video files.
I'm using the GPS enabled WM5 Ship ROM.
I'll do some more tests on different media files, it would be a real shame if we're limited to only MP3s...
EDIT: Wow the sound quality is amazing and the bass is fantastic!
I haven't tried playing AAC files because I haven't got any...I specifically converted all my formats so I could use GS player. I'm pretty sure the headset can play WMA as well..I haven't really tested...
The next thing I notice is this constant high pitch ringing or hissing sound...It's very uncomfortable.
I've seen reports of this all over the forum in regards to the Triity, let's hope there is a fix available soon.
wma file work.
i have wm6 and a motorola ht820 and it works great. the only thing is that the perfomance of the trinity decrease while i'm using the bluetooth-headset.
Nokia bh-501 Not discovering in my windows XP laptop
Hi guys,
I am finding difficulties connecting my nokia bh-501 to my laptop. Not even its discovering in My bluetooth places. Is there any driver that i need to upgrade to use the Nokia bluetooth headset BH-501 on my laptop?
Please help me...
Yuvaraj
soadownz said:
hey guy,
I'm having problems getting this thing to work properly, i've searched and searched and can't seem to find anyone else with this problem:
Device pairs fine and seems to function perfectly as a handsfree, however, using media player the audio comes out of the phone even as the 'click' sound effects are coming out the headset! Can't seem to get any audio from media player or core player to come out the headset, the 'htc streaming media player' uses the headset but you can't open files etc using that.
I've tried with WM5 and WM6, same results.
Anyone faced this problem before?
Click to expand...
Click to collapse
Hi there,
I don't know where to ask this, so it went to "General".
I've got a JasJar running WM6 and it happily runs stereo music on my Motorola HT820 bluetooth headset. I also have Sony BT2500 car stereo system which supports bluetooth phone as well as A2DP. with my HT820, I just turn the headset on and jasjar sees the headset and connects to it, but with the BT2500 only the phone part is automatically connected. if I want to listen to music I have to (on my jasjar) go to settings/connections/bluetooth and tap and hold on my xplod (my sony BT2500) and set it as wireless stereo.
is there any way to avoid this step (as I'm usually driving when i have to do this)? if not, is there an easy way to do it with one hand and no tap and hold ?
Cheers,
Shafa
Hey Shafa,
I've got the same problem with my Prophet and a Pioneer BTB200. So far i found no solution, so i most likely will have to write a program to connect to a BTdevice as wireless stereo, if it autoconnects as a handsfree device and is a2dp capable.
hey Lemmz,
I'm very interested to know what API you have to call to do this...
Cheers,
Shafa
HTC Faraday
Hello all,
Are there any resources here for the Cingular 2125 , I would like to port linux on the 2125. sorry if i have mis-posted.
thanks,
rvb
@shafa:
there is a Bt_api.h in the wm5 SDK which defines a function called RequestBluetoothNotifications; so far i found
RequestBluetoothNotifications
Handling Events from the Bluetooth Stack
Retrieving AVDTP Connection State
My idea would be to monitor all bluetooth connection events (most likely via a service), see which device (auto)connects and if it is a handsfree-device and supports wireless-stereo, initiate pairing for the latter.
i will try to do some coding later today. i'll keep you informed.
Cheers,
lemmz
Ok, so far i can recieve bt-related events. unfortunately i've found no info on how to initiate an a2dp connection microsoft-style. There's tons of code for AudioGateway stuff, but imho thats pretty useless.
Looking at the registry i found in HKLM\Software\Microsoft\Bluetooth\Services\0000110B-(...) reference to "Wireless Stereo" and bthutil.dll. looking at the WM6 SDK, bthutil.h, there are just two functions, BthGetMode and BthSetMode, for turning BT on and off.
I'm also looking at the sources for the (settings->connections->bluetooth)-Dialog, btenum.cxx and btmgmtui.cpp, maybe there is some info on this.
Edit:
btw, this 0000110B thing is referred to as AudioSinkServiceClass_UUID. But no luck on that either.
Soo, i think i'm quite close now...
DRVM_MAPPER_PREFERRED_SET -- with waveOutMessage you can switch soundoutput to different devices, unfortunately for a2dp it returns NOTSUPPORTED.
But within the a2dp driver i found some messages:
WODM_BT_SCO_AUDIO_CONTROL, WODM_OPEN_CLOSE_A2DP, WODM_PARAM_OPEN_A2DP
they seem to initiate a connection and set the preferred output device, just like the DRVM_MAPPER_PREFERRED_SET should. Tonight i'll experiment with it.
SUCCESS!!
It worked just as i though: a single command does all the work.
waveOutMessage((HWAVEOUT)devId, WODM_OPEN_CLOSE_A2DP, WODM_PARAM_OPEN_A2DP, NULL)
The device to connect to has to be paired and, of course, in range. I'm now going to clean up the code and build a litte configuration-tool.
Freeware tool
EDIT: Version 1.0.rc-2 uploaded . Find the download link below:
http://teksoftco.com/index.php?section=freeware
I've just uploaded version 1.0.rc-1 of the A2DP plugin. It can be downloaded and used as freeware (0 cost) from http://teksoftco.com/index.php?section=freeware , or find it below attached to this message, including a short usage guide.
New in this release (as many users requested):
-signal indicator
-3 modes for headset: OK, Off, Err
-settings panel added
-Handle Bluetooth option
-Execute File after start option
-applet added in start->settings->system to start settings
-a2dp.exe included in the package, that with parameters: a2dp.exe -bluetoothn|off -a2dpn|off or a2dp.exe -bluetooth:1|0 -a2dp:1|0
------------------
Actually devices that support A2DP (most wm6.0 bluetooth devices), come with 2 audio drivers installed:
1) The "Audio Output" Driver (supported since ppc 2002)
2) The "Bluetooth Advanced Audio Output" Driver, that is responsible of sending audio data over a L2CAP Bluetooth connection, as per A2DP protocol
When the user connects a Stereo A2DP headset, and selects the "Wireless Stereo" profile, the Bluetooth Adv. Audio Output becomes the nr. 1 audio output route, and is indexed as the First audio driver. Any application will output sound by using that driver.
The problem is that sometimes we are already listening to audio in the device's speaker's, and then suddenly we want to switch the output to our a2dp headsets - this is sometimes problematic, as the First audio driver changes from "Audio Output" to "Bluetooth Adv. Audio Output" and the applications currently playing audio need to be restarted.
For such issues, I have provided a tool, as freeware, that will install as a today plugin and provide the user with the possibility of instantly switching the audio between Device Speaker and A2DP Stereo Headset.
It is designed for WM6.0, Microsoft Bluetooth stack, please download it and let me know how it works for you. There are some more modifications that will be done, so this is only Beta-1
The CAB installer and instructions are in the ZIP attached.
(tested on ultimate 8150/wm6.0 and eten m600+/wm5.0, the gfx was made for vga but works on qvga too)
Hello Radhoo,
first times thank you, after such a thing I searched for a long time in vain.
tool functions on the Artemis with WM6 perfectly.
If the Tool were still developed further, I would be pleased genuinly, and would like to call hereby gladly my desires:
1. Bluetooth automatically switch on and off
2. Komandozeilensteuerung
3. Traybuttons without Todayplugin
4. Automatic start of a desired program after activation of A2DP (Mortplayer)
thanks Menkul
Hello menkul, Thanks for the feedback.
What is Komandozeilensteuerung?
Sorry Komandozeilensteuerung ist german.
I mean a Funktion a2pd.exe blueon A2DPon
a2dp.exe blueoff
or so.
Also a exe with startparameter
Menkul
Great idea
Any way to indicate bluetooth 1.2 or 2.0 status/line speed, signal strength, bandwidth?
bjrmd said:
Great idea
Any way to indicate bluetooth 1.2 or 2.0 status/line speed, signal strength, bandwidth?
Click to expand...
Click to collapse
Will try to
I have two spare days for research (wow!) so I'll try to come up with something.
lemmz
lemmz said:
SUCCESS!!
It worked just as i though: a single command does all the work.
waveOutMessage((HWAVEOUT)devId, WODM_OPEN_CLOSE_A2DP, WODM_PARAM_OPEN_A2DP, NULL)
The device to connect to has to be paired and, of course, in range. I'm now going to clean up the code and build a litte configuration-tool.
Click to expand...
Click to collapse
I am sorry I've "invaded" this thread, without first saying thanks to lemmz for his work, as I very well understand the effort needed to perform this kind of research.
While I wasn't aware of his findings (which are available in AK :
bt_ddi.h, WM520\PUBLIC\COMMON\OAK\INC\ ) I just wanted to give another free tool to the community, so I posted this in a few threads where users where requesting A2DP tools. I hope this is ok.
Dear Lemmz,
thanks a lot, i will take a look asap.
thanks again
Shafa
Hey Lemmz,
where do you get the devId from?
I'm thinking about writing the application, but I'm not a C++ guy (anymore atleast) I need to write it in C#...
Cheers,
Shafa
me again. should i use WAVE_MAPPER for device ID? if so, what is the value for it or even better, where can i find the whatever.h that has the value? is there an SDK i should download?
Cheers,
Shafa
menkul said:
Sorry Komandozeilensteuerung ist german.
I mean a Funktion a2pd.exe blueon A2DPon
a2dp.exe blueoff
or so.
Also a exe with startparameter
Menkul
Click to expand...
Click to collapse
Done, original post updated, download 1.0.rc-1
Signal indicator also added: it shows the bluetooth connection strength!
shafa said:
me again. should i use WAVE_MAPPER for device ID? if so, what is the value for it or even better, where can i find the whatever.h that has the value? is there an SDK i should download?
Cheers,
Shafa
Click to expand...
Click to collapse
You should use waveOutGetNumDevs() to get the number of wave devices.
Then you can use their index directly: 0 , 1 , eg.:
int idWAVE_BTAudio = 0; // or 1
waveOutMessage((HWAVEOUT)idWAVE_BTAudio ...
Where:
Code:
0. Audio Output
1. Bluetooth Advanced Audio Output
Be careful, the index changes when one device is selected, so you should check the WAVE devices each time you want to switch the audio.
Personally I've used waveOutGetNumDevs() then waveOutGetDevCaps to see what kind of device is each of the enumerated ones.
Hope this helps.
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Hi! I have a brand new Jabra 620s bluetooth-headset. When I turn the headset on and search for bluetooth devices on my computer I can see it, but I cant see it when I search for it on my touch pro.
What could be the problem here?
I had a similar problem last night (and have it quite often when i need to pair). It doesn't detect it until the 3rd or 4th time in which last night it didn't even detect it either. I power cycled the headset and my phone found it the first time.
Yeah, I tried rebooting my headset and my phone several times, but I still can't get it to work...
Figured it out... Had to hold in a button on the headsett to make it avaliable for new devices...
But new problem:
I don't get sound in the headsett when I play music. But when I make a call the sound is in the headsett. What could be the problem here?
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
nyckid211 said:
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
Click to expand...
Click to collapse
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
slogum said:
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
Click to expand...
Click to collapse
You can use Advanced Config to enlarge the bluetooth bitpool under the bluetooth tweaks. Set it to "very high" for best sound quality (uses more system resources tough).
HTH
Maximum bit-pool setting is 1561. I dont think it solves the problem, cause the quality is still really bad.
Any other tips? Or do I have to return the headset cause a brand new ~1000$ phone cant play on a wireless bluetooth headset?!
Bump.. Are there really no solutions?