Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid
Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.
i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules
totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.
rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid
Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.
My BT620s is on the way, I can't wait. I will let you know how it works out.
computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.
Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.
i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.
Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.
An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?
Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.
sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????
Hello,
I am having some issues getting A2DP working on my sprint ppc-6700, I recently got a moto s805 stereo bluetooth headset and cannot figure this out. Searching didn't help much since the recent AKU upgrades confuse (at least for me) what should and should not be done, so please bear with me.
The headset work with windows (and linux) via A2DP and with my phone as hands free, I can make calls.
I just upgraded to kirvin's 3.5 clean & simple ROM, I thought this would give me A2DP "out of the box".
When I start any player morts (3.31b59), coreplayer or wmp I get a blip of audio and then for most part nothing. Sometimes after it stops, I get audio out of the speaker or wired headphones, however setting the s805 to "wireless stereo" seems to keep the audio stream over the headset, but I only get a low hiss or random blips of sound. The AVRCP seems to work as I can control mort's skip fwd & back even when no audio is coming out of the headset.
It seemed like the poor thing couldn't keep up so I also tried XCPUscalar to overclock the processor, but that did not help either.
Are there any reg hacks to get his working?
Is the widcomm stack an option and should I consider it?
Should I be using a specific file format/bit rate? I tried just about everything including mp3 128bps with no change in performance.
Should I be using another AKU version or build?
Are there any decent how to's? I wouldn't mind learning a bit, but just getting it done would be fine too.
Thanks in advance.
-shiggs
I figured this out, but still don't have a sure fire way of getting it workikng every time.
In short it will only work if the wireless stereo icon pops up when I enable bluetooth, if not I get a blip of audio and them nothing or just nothing at all.
Hi guys!
I am a little confused by all the names this little phone is called, so i hope this is correct thread.
I can connect the headset and listen to music using WMP. I can answer a call while i´m still listening to music(it pauses), but when it switches back to the player the sound is gone. All calls works but I can´t listen to my WMP. After a soft or hard reset i work again, until it rings again.
I´m using the tornado patch posted by kyunga and khuanchai(.reg import)
If someone know anything, please tell me...
//Johan
I have a ds-970, and I have tested motorola and nextlink spider bluetooth stereo headsets. The problem you are experiencing is specific to the ds970, moto and nextlink automaticallys switch back to wireless stereo after call. w/ ds970, only thing that I have found to fix this is to manually activate wireless stereo (comm manager, bluetooth settings) after a call. yeah, that is a pain.
Thanks for the info. Well, I was hoping that there would be some sort of adjustment in the .reg department.
You just can´t win em all.....
Edit: I found a solution... I tried Crossbow_Reloaded(WM6) and now it´s working... The sound is a little bit distorted in the upper freq. range though, but hey...you just can´t win em all
hey guy,
I'm having problems getting this thing to work properly, i've searched and searched and can't seem to find anyone else with this problem:
Device pairs fine and seems to function perfectly as a handsfree, however, using media player the audio comes out of the phone even as the 'click' sound effects are coming out the headset! Can't seem to get any audio from media player or core player to come out the headset, the 'htc streaming media player' uses the headset but you can't open files etc using that.
I've tried with WM5 and WM6, same results.
Anyone faced this problem before?
Hi
I've just purchased this headset last week and am thoroughly impressed by it so far. There's not much info on it out there but theres a few characteristics I've found out about this headset; i wonder if you can help me confirm them.
- It seems like when you take the headset off your head it automatically turns off? at first I thought mine was faulty but this behaviour was quite consistent and I figured it was just a power saving feature.
- seems like it likes to turn by itself if idle quite fast.
- need to manually set the device as hands free for it to actually work as a hands free
- unable to use the mic when connecting to pc. I wanted to use it for my sip client on the pc but alas the microphone function doesn't register? What should I be doing to make this work?
In regards to your problem; I'll outline the steps I take to use mine.
1. turn on headset
2. turn on trinity bluetooth from comm manager
3. go to bluetooth settings from settings
4. touch and hold down the nokia bh501 item until the drop down menu appears ,then select "set as wireless audio" or similar
--> you should hear a sound, if you can hear this then it will work, if theres nothing
--> alternatively, select hands free if you want to use it as hands free!
5. open your favorite mp3's and it should work fine.
Does this work for you? Btw im using Mun's TE wm6 rom. What rom are u using?
Eureka!
Your post made me realise I had only tried the headset with AAC files and not MP3 and guess what? The headset only works with MP3 files! Although this is probably a limitation of the trinity.
I can also confirm it doesn't work with nerodigital video files.
I'm using the GPS enabled WM5 Ship ROM.
I'll do some more tests on different media files, it would be a real shame if we're limited to only MP3s...
EDIT: Wow the sound quality is amazing and the bass is fantastic!
I haven't tried playing AAC files because I haven't got any...I specifically converted all my formats so I could use GS player. I'm pretty sure the headset can play WMA as well..I haven't really tested...
The next thing I notice is this constant high pitch ringing or hissing sound...It's very uncomfortable.
I've seen reports of this all over the forum in regards to the Triity, let's hope there is a fix available soon.
wma file work.
i have wm6 and a motorola ht820 and it works great. the only thing is that the perfomance of the trinity decrease while i'm using the bluetooth-headset.
Nokia bh-501 Not discovering in my windows XP laptop
Hi guys,
I am finding difficulties connecting my nokia bh-501 to my laptop. Not even its discovering in My bluetooth places. Is there any driver that i need to upgrade to use the Nokia bluetooth headset BH-501 on my laptop?
Please help me...
Yuvaraj
soadownz said:
hey guy,
I'm having problems getting this thing to work properly, i've searched and searched and can't seem to find anyone else with this problem:
Device pairs fine and seems to function perfectly as a handsfree, however, using media player the audio comes out of the phone even as the 'click' sound effects are coming out the headset! Can't seem to get any audio from media player or core player to come out the headset, the 'htc streaming media player' uses the headset but you can't open files etc using that.
I've tried with WM5 and WM6, same results.
Anyone faced this problem before?
Click to expand...
Click to collapse
Hello everyone,
I have a somewhat cryptic and annoying problem here. I use an HTC Touch HD (Blackstone) with a hama BSH-240 BT stereo headset. The headset is a four-button one (play/pause, stop, vol up, vol down) with long presses and dual-presses serving as extra keys. It's about one year old, and I used it with my iPAQ rw6815 before switching to Blackstone. Always worked perfectly.
Call me a perv, but I rather like TouchFLO 3d, and it, too, worked for me just fine for two months. Then, SUDDENLY.
Well, not so suddenly, actually, because I did a few things with my phone the day before I ran into the problem: uploaded a few more tracks onto my card, built a new playlist in WMP, and tried a wired headset (since I wanted to listen to a certain radio show).
The first sign of trouble (not sure if it's related at all) was that HTC Audio Manager didn't see my new WMP playlists - I tried it building a new one a couple of times to no effect. I simply started playing from the All Music list (fine by me, that's what my primary playlist is anyway), but then I noticed that the Audio Manager no longer responded to the Play/Pause button on my headset. All other buttons worked fine, and I'm pretty sure it's not a hardware problem, since the long press on the same button works okay (it's 'repeat last call').
The usual rain dancing didn't help at all (remove/add the Audio Manager tab, re-pair the headset, soft reset) and looking through the TouchFLO/WMP/WM options gave me no clues either.
I googled for hints and searched the forums as well, but didn't find anything of relevance.
I do not expect a magic solution for this, but perhaps someone has run into this problem before me and can give me some hints?
Sorry if I'm missing something obvious, could be a dumb moment on my part.
Thanks in advance
Sorry for bumping this, but I have some new information about my problems.
First of all, I made sure the hardware is okay by digging up my old iPAQ and pairing my headset to it. Everything works top-notch.
Moreover, when WMP is running on my Touch HD, all the headset controls work in it. (This means the device is fully usable after all, but I really like the Audio Manager a lot more.) I have a weird feeling WMP somehow hijacked AVRCP from HTC Audio Manager.
Any ideas on how to fix it, perhaps?