Related
Is it possible to disable the startup vibration?
I dont want my Kaiser to vibrate while sitting in its cradle...
good question. interested also in this...
patr!k said:
good question. interested also in this...
Click to expand...
Click to collapse
Mee 2 ....
One more...
ok, so maybe is time to start brainstorming except writing "me too"! it is like in the kindergarten
in HKLM/Software/HTC/ are many keys, e.g. StartupAnimation..
i tried to make a new key with StartupVibration/Enable=1
but looks like it does not work. any another ideas?
Umm, if it did work, shouldn't you be setting that value to 0?
IsBjorn said:
Is it possible to disable the startup vibration?
I dont want my Kaiser to vibrate while sitting in its cradle...
Click to expand...
Click to collapse
In my knowledge, the vibrating on the smart mobility screen, the first on the boot process, is't related to registry, cause the system haven't started yet. So perhaps is a value in the SPL.
I don think you can change into the registry.
did not work even with "0" (as disabled)...
...
if it is a value in the SPL, then no more fight with it...
patr!k said:
did not work even with "0" (as disabled)...
...
if it is a value in the SPL, then no more fight with it...
Click to expand...
Click to collapse
Why not fight...? we can send a petition to pof to take a look at the HardSPL to see if can find the value (if exist).
i ment not fight with it through registry of course
Why would it vibrate in your cradle? Do you continuously restart your phone in the cradle? Or have an app that restarts your phone often?
CorruptedSanity said:
Why would it vibrate in your cradle? Do you continuously restart your phone in the cradle? Or have an app that restarts your phone often?
Click to expand...
Click to collapse
I install programs and do regedits while the Kaiser is connected to my PC. Many of these programs & changes needs soft reset.
I see Thanks IsBjorn.
Wish I could help!
CorruptedSanity said:
I see Thanks IsBjorn.
Wish I could help!
Click to expand...
Click to collapse
It looks like no one has a solution to this...
IsBjorn said:
It looks like no one has a solution to this...
Click to expand...
Click to collapse
Free bUmP for you!
I am going to inadvertently bumb this with a rather useless comment (admittedly)...
Please don't bother any cooks with this... Let them focus on the bigger issues/features.
Later, Lew
lewcamino said:
I am going to inadvertently bumb this with a rather useless comment (admittedly)...
Please don't bother any cooks with this... Let them focus on the bigger issues/features.
Later, Lew
Click to expand...
Click to collapse
It's not a bad idea to let ppl to make contributions of any type. This let ppl learn about other ppl ideas about Kaiser. No one knows what are beside the vibration...
Perhaps this post moves someone to learn something... enough for me to be here...
I personally like this feature since in order to actually power on a Kaiser you have to press/hold the power button until you either see the green light come on or feel the vibration.
Sleuth255 said:
I personally like this feature since in order to actually power on a Kaiser you have to press/hold the power button until you either see the green light come on or feel the vibration.
Click to expand...
Click to collapse
I never turn my Kaiser on or off, just soft restarts after and during installations and regedits.
I remember that some of my old mobiles did automaticly disable vibration during charging and when put in a cradle. All this to protect the connectionplug and "chargerport".
(Not that good in writing english; what's the real name on the "chargerport"?)
Charge port = Power jack?
Charge port sounds good to me. =)
Later, Lew
Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
like press the power button or soft reset and never start in wm.
i would also like a solution on how to re-fix it by myself after that.
maybe one idea, is to flash it and while flashing soft reset. what will happen then? my thoughts are that it will not start until i re-flash it from the computer.
how about that? and plz don't ask why i want to do this crazy thing
have my reasons
TeDeV said:
Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
Click to expand...
Click to collapse
Remove the battery.
follow the steps:
1- use a hammer, and break it;
2- go to a store and a buy a new one....
riguti said:
follow the steps:
1- use a hammer, and break it;
2- go to a store and a buy a new one....
Click to expand...
Click to collapse
hahaha.
Seriously why would you do such a thing Tedev?
/badboy mode on
maybe to buy from someone a device showing the seller that his produt seems dead, so he can pay less... and, then, turn it back to life to a normal use...
/badboy mode off
andrukit said:
hahaha.
Seriously why would you do such a thing Tedev?
Click to expand...
Click to collapse
Getting new deviece @ end of warrenty!
TeDeV said:
Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
Click to expand...
Click to collapse
Make a note of your current radio version. Enter tricolor bootloader, connect with MTTY and type "task 2a" followed by enter. You can later recover with FrankenKaiser.
Yes, to convince your partner you were not able to answer her calls sometimes requires ingenious tricks
leopardone was close
if i manage to do what i want, i will tell you what and how i did it.
we will know by Friday
jockyw2001 said:
Yes, to convince your partner you were not able to answer her calls sometimes requires ingenious tricks
Click to expand...
Click to collapse
I like the way you think
Great thread about Rom development it is.
If its a Tilt tell them that part of it doesnt work like you intended it to, like the camera doesnt always turn on, or it doesnt always awnser calls. Then after they tell you to reset and w/e DEMAND a new one. They have to replace your device if it is still under warranty.
Hey,
I have had a vox for over half a year now and I was using the new OS from HTC.
Recently I had to reflash my phone because it was having a number of issues. The enter key on the front keypad would not work. It would handomly turn the bluetooth on. The screen would not be bright while I was using it (the standy dim lighting).
The enter key on the slide out keyboard does work.
After the reflash everything worked great. Now I have used the phone for a week and this starts happening again. Sometimes restarting will get rid of these problems, but it still seems to be there.
I tried to update to Dr. Gonzo's 6.1 ROM, but I was unable to flash that one, I got an error saying the ROM is corrupt.
Do you think this may be a hardware problem?
Please let me know what you think,
Thanks,
GRoder
which ROM are you currently using?
Did you USPL the device before flashing WM6.1 ROM?
that is a necessary step.
Let us know after you flash doc's ROM.
And another one who didn't even care to read the readme or some threats...
frauhottelmann said:
And another one who didn't even care to read the readme or some threats...
Click to expand...
Click to collapse
oh come on man... play nice. some just don't know that search is your friend. They'll learn though.
frauhottelmann said:
And another one who didn't even care to read the readme or some threats...
Click to expand...
Click to collapse
hey hey, I did read both of the supplied read me files, however I'm sure sure that the updates UPL/SPL updates worked correctly. There is one step that I am unsure about.
bellor said:
oh come on man... play nice. some just don't know that search is your friend. They'll learn though.
Click to expand...
Click to collapse
yea I always use the search function in forums, why ask what 10 others have asked before.
I'm just curious if anyone has experienced a similar problem with their phone. I'm hoping this is not a hardware issue...
Nope, this is something for which people are opening a new threat every day, so I hope you can understand that I am a bit grumpy sometimes!
@groder54
There is one step that I am unsure about.
Click to expand...
Click to collapse
what is it?
prajith said:
@groder54
what is it?
Click to expand...
Click to collapse
I will try it again tonight when I get home. I think it was the step where I had to run the *.bat file with all the promts...at the end the phone did not behave like it said in the read me so I think something may have gone wrong at that point.
Unfortunately, my sensation is bricked after supercid and back to S-on.
The screen is black and does not turn on power button + Down Vol.
Someone can help me?
There is a guide to recover it please?
Thanks a lot to anyone!
what kind of battery life does this rom have?
downloading now will give feed back in a sec
luckyduck69 said:
what kind of battery life does this rom have?
Click to expand...
Click to collapse
I have the original battery. about 50% of charge.
daman215 said:
downloading now will give feed back in a sec
Click to expand...
Click to collapse
thanks man! rofl
aramis73 said:
Unfortunately, my sensation is bricked after supercid and back to S-on.
The screen is black and does not turn on power button + Down Vol.
Someone can help me?
There is a guide to recover it please?
Thanks a lot to anyone!
Click to expand...
Click to collapse
but to answer your question... i don't believe there are any guides for that. and it does, in fact, sound like a hard brick. i would look into replacing it. if someone on here thinks of something i didn't or knows how to fix this.. chime in. but if i were you i would just get it replaced.
and fyi... there might be flaming towards you for posting this in the 'dev' section versus the 'q&a' section. be prepared.
luckyduck69 said:
but to answer your question... i don't believe there are any guides for that. and it does, in fact, sound like a hard brick. i would look into replacing it. if someone on here thinks of something i didn't or knows how to fix this.. chime in. but if i were you i would just get it replaced.
and fyi... there might be flaming towards you for posting this in the 'dev' section versus the 'q&a' section. be prepared.
Click to expand...
Click to collapse
Thanks! luckyduck69
If anyone knows a guide ok, otherwise I will replace it.
Wrong section
Wrong section!
r u able to go to bootloader ?.
seeing this as very tragic, I think there would be less people flaming. for it would be very difficult if you were on his feet. scary! hehe. but then, wrong section. is there a cut paste thing here?
did you try plug in charge and go to bootloader? it should vibrate if your charged.
vitusdoom said:
seeing this as very tragic, I think there would be less people flaming. for it would be very difficult if you were on his feet. scary! hehe. but then, wrong section. is there a cut paste thing here?
did you try plug in charge and go to bootloader? it should vibrate if your charged.
Click to expand...
Click to collapse
i wasn`t laughing at the fact that he brick his phone, but the fact that he been here since 2010 should know that this is the wrong section
vitusdoom said:
seeing this as very tragic, I think there would be less people flaming. for it would be very difficult if you were on his feet. scary! hehe. but then, wrong section. is there a cut paste thing here?
did you try plug in charge and go to bootloader? it should vibrate if your charged.
Click to expand...
Click to collapse
Excuse me for wrong section.
In any case i can't charge this phone and go to the bootloader. always black screen.
Are you sure your battery is not dead? Try removing it / putting it back or try another battery.. There are known charging issues and theres a thread about it somewhere.
Aramis73 have you tried to remove the battery and keep it off for about 30 minutes, reinsert it, load it with the current and try to turn it on.
Did this just happen all of a sudden or did you do something you weren't supposed to?
Sent from my HTC Sensation 4G using XDA Premium App
shadow00 said:
Aramis73 have you tried to remove the battery and keep it off for about 30 minutes, reinsert it, load it with the current and try to turn it on.
Click to expand...
Click to collapse
thanks for your answer but the phone has no battery overnight.
this morning i reinsert the battery but the phone won't power on.
You should trade it in for a Samsung Galaxy S II, we have loads of people who don't understand forum sections, I'm sure you'll feel at home.
Posted from the baddest phone in the multiverse.
Question: How did you manage to brick it in the first place?
aramis73 said:
thanks for your answer but the phone has no battery overnight.
this morning i reinsert the battery but the phone won't power on.
Click to expand...
Click to collapse
Sounds like you had the crappy recovery and got boned without a charge.
What you need is :
A. Another Sensation Battery to try and boot with.
or
B. A wallcharger for the battery itself alone.
Once powered back on you need to flash the modded Revolutionary CWM available here
So, after you have downloaded the above zip place it on the root of your SD and power into bootloader mode. It will ask you to update, agree & you'll be back in business in no time.
This is the best case scenario you can hope for.
Goodluck !
Hey guys,
Stock ROMs are my favorites; they bring stable experience for daily basis except for the ultra speed. (but stable means the most for me sometimes)
I used to root my previous phone only for some simple purpose, screenshots for example; then a few days ago I found a trick (from a forum written in Chinese, http://bbs.gfan.com/android-3345443-1-1.html) to do this without root permission.
Just press Power/Lock + Menu key (at the bottom left), the sticky note app will show up with an instant screenshot. Save it and you will get the screenshot in your /sdcard/quicknote/snapshot/ directory.
Hopefully this trick could help you out.
Note:
I've tested this on ME865, the Atrix 2, Asian Pacific version.
Other versions and models may not applied for this shortcut... sorry that I didn't noticed this before
Great! Thank you!
U sure this works on the a2?
Sent from my MB865 using XDA App
I tried this several different ways and I was unable to duplicate this on the MB865, I am guessing this only works on the ME865.
Thanks anyhow though.
jimbridgman said:
I tried this several different ways and I was unable to duplicate this on the MB865, I am guessing this only works on the ME865.
Thanks anyhow though.
Click to expand...
Click to collapse
Same here...
However if you do want a good free no-root-necessary (on the A2 at least) then get Screen Grabber... by default it is set to use root but it works when you uncheck the "use root" option.
Sent from my MB865 using Tapatalk
Did not work for me either, however as stated above, ScreenGrabber works great.
jimbridgman said:
I tried this several different ways and I was unable to duplicate this on the MB865, I am guessing this only works on the ME865.
Thanks anyhow though.
Click to expand...
Click to collapse
Sorry for my mistake, I confirm this shortcut works on ME, but not tested on MB.
I'm using an Asian Pacific ME865 device sales at Hong Kong.
Thats it. To capture screenshot, you need to do three combination keys.
Press "power on/lock + vol down + camera button". Hold three keys for 3 sec.
Tested on atrix 2 ics.
Y is this necessary.? We have stock screenshot capability right! Just hold power and volume down key together for 3-4 sec.!
Sent from my phone's mind.!
Lifehacker7 said:
Y is this necessary.? We have stock screenshot capability right! Just hold power and volume down key together for 3-4 sec.!
Sent from my phone's mind.!
Click to expand...
Click to collapse
This was for GB.
Sent from my "security" enabled smartphone.
eikichifirst said:
Thats it. To capture screenshot, you need to do three combination keys.
Press "power on/lock + vol down + camera button". Hold three keys for 3 sec.
Tested on atrix 2 ics.
Click to expand...
Click to collapse
Lifehacker7 said:
Y is this necessary.? We have stock screenshot capability right! Just hold power and volume down key together for 3-4 sec.!
Sent from my phone's mind.!
Click to expand...
Click to collapse
Did either of you look at the dates of the original posts... almost a year ago now. Did you not think that things were different on 2.3.6 than they are in ICS now?
Please think and read thoroughly before posting or replying, including when and why someone might have posted something. I understand both of you are noobs, so consider this your first little slap on the wrist.
Be glad it was I that did this, as others may not be so nice in the future. We are a good group here, but not reading and making posts that are not well thought out or just plain not researching will get you things you do not want in here.
--EDIT--
Oh and by the way, Welcome to our little slice of XDA!!!
I am one of your devs in here, and I am sure you will see a lot of me.
Now, go read these threads, please:
http://forum.xda-developers.com/showthread.php?t=1857631
http://forum.xda-developers.com/showthread.php?t=1778853
http://forum.xda-developers.com/showthread.php?t=1396650
Lifehacker7 said:
Y is this necessary.? We have stock screenshot capability right! Just hold power and volume down key together for 3-4 sec.!
Sent from my phone's mind.!
Click to expand...
Click to collapse
Ah, sorry mate yea only two keys..post while watching walking dead sux..lol
eikichifirst said:
Ah, sorry mate yea only two keys..post while watching walking dead sux..lol
Click to expand...
Click to collapse
welcome to the A2 community !
Yup in ICS we use just the power key + volume down key combination to take a screenshot
BTW do read the links posted by jim above.. theyre quite helpful, and just to let you know, some of old posts are related to GB, so do watch out for that post date before you reply to anything, can get very confusing otherwise.
Anyways, good to see a walking dead fan here :good:
Power button + Down volume key @Atime for 3-5 sec.. Not sure abt time just hold u will here a sound .. :cyclops:
cyberman007 said:
Power button + Down volume key @Atime for 3-5 sec.. Not sure abt time just hold u will here a sound .. :cyclops:
Click to expand...
Click to collapse
Had you bothered to read through the thread, you would've noticed that this question was answered over a year ago. Next read before posting.
Brought to you by time and relative dimensions in space.