Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
like press the power button or soft reset and never start in wm.
i would also like a solution on how to re-fix it by myself after that.
maybe one idea, is to flash it and while flashing soft reset. what will happen then? my thoughts are that it will not start until i re-flash it from the computer.
how about that? and plz don't ask why i want to do this crazy thing
have my reasons
TeDeV said:
Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
Click to expand...
Click to collapse
Remove the battery.
follow the steps:
1- use a hammer, and break it;
2- go to a store and a buy a new one....
riguti said:
follow the steps:
1- use a hammer, and break it;
2- go to a store and a buy a new one....
Click to expand...
Click to collapse
hahaha.
Seriously why would you do such a thing Tedev?
/badboy mode on
maybe to buy from someone a device showing the seller that his produt seems dead, so he can pay less... and, then, turn it back to life to a normal use...
/badboy mode off
andrukit said:
hahaha.
Seriously why would you do such a thing Tedev?
Click to expand...
Click to collapse
Getting new deviece @ end of warrenty!
TeDeV said:
Hello, i need some ideas from you
how can i make my kaiser not to start, so it will look like "broken"?
Click to expand...
Click to collapse
Make a note of your current radio version. Enter tricolor bootloader, connect with MTTY and type "task 2a" followed by enter. You can later recover with FrankenKaiser.
Yes, to convince your partner you were not able to answer her calls sometimes requires ingenious tricks
leopardone was close
if i manage to do what i want, i will tell you what and how i did it.
we will know by Friday
jockyw2001 said:
Yes, to convince your partner you were not able to answer her calls sometimes requires ingenious tricks
Click to expand...
Click to collapse
I like the way you think
Great thread about Rom development it is.
If its a Tilt tell them that part of it doesnt work like you intended it to, like the camera doesnt always turn on, or it doesnt always awnser calls. Then after they tell you to reset and w/e DEMAND a new one. They have to replace your device if it is still under warranty.
Related
Is it possible to disable the startup vibration?
I dont want my Kaiser to vibrate while sitting in its cradle...
good question. interested also in this...
patr!k said:
good question. interested also in this...
Click to expand...
Click to collapse
Mee 2 ....
One more...
ok, so maybe is time to start brainstorming except writing "me too"! it is like in the kindergarten
in HKLM/Software/HTC/ are many keys, e.g. StartupAnimation..
i tried to make a new key with StartupVibration/Enable=1
but looks like it does not work. any another ideas?
Umm, if it did work, shouldn't you be setting that value to 0?
IsBjorn said:
Is it possible to disable the startup vibration?
I dont want my Kaiser to vibrate while sitting in its cradle...
Click to expand...
Click to collapse
In my knowledge, the vibrating on the smart mobility screen, the first on the boot process, is't related to registry, cause the system haven't started yet. So perhaps is a value in the SPL.
I don think you can change into the registry.
did not work even with "0" (as disabled)...
...
if it is a value in the SPL, then no more fight with it...
patr!k said:
did not work even with "0" (as disabled)...
...
if it is a value in the SPL, then no more fight with it...
Click to expand...
Click to collapse
Why not fight...? we can send a petition to pof to take a look at the HardSPL to see if can find the value (if exist).
i ment not fight with it through registry of course
Why would it vibrate in your cradle? Do you continuously restart your phone in the cradle? Or have an app that restarts your phone often?
CorruptedSanity said:
Why would it vibrate in your cradle? Do you continuously restart your phone in the cradle? Or have an app that restarts your phone often?
Click to expand...
Click to collapse
I install programs and do regedits while the Kaiser is connected to my PC. Many of these programs & changes needs soft reset.
I see Thanks IsBjorn.
Wish I could help!
CorruptedSanity said:
I see Thanks IsBjorn.
Wish I could help!
Click to expand...
Click to collapse
It looks like no one has a solution to this...
IsBjorn said:
It looks like no one has a solution to this...
Click to expand...
Click to collapse
Free bUmP for you!
I am going to inadvertently bumb this with a rather useless comment (admittedly)...
Please don't bother any cooks with this... Let them focus on the bigger issues/features.
Later, Lew
lewcamino said:
I am going to inadvertently bumb this with a rather useless comment (admittedly)...
Please don't bother any cooks with this... Let them focus on the bigger issues/features.
Later, Lew
Click to expand...
Click to collapse
It's not a bad idea to let ppl to make contributions of any type. This let ppl learn about other ppl ideas about Kaiser. No one knows what are beside the vibration...
Perhaps this post moves someone to learn something... enough for me to be here...
I personally like this feature since in order to actually power on a Kaiser you have to press/hold the power button until you either see the green light come on or feel the vibration.
Sleuth255 said:
I personally like this feature since in order to actually power on a Kaiser you have to press/hold the power button until you either see the green light come on or feel the vibration.
Click to expand...
Click to collapse
I never turn my Kaiser on or off, just soft restarts after and during installations and regedits.
I remember that some of my old mobiles did automaticly disable vibration during charging and when put in a cradle. All this to protect the connectionplug and "chargerport".
(Not that good in writing english; what's the real name on the "chargerport"?)
Charge port = Power jack?
Charge port sounds good to me. =)
Later, Lew
Hey,
I have had a vox for over half a year now and I was using the new OS from HTC.
Recently I had to reflash my phone because it was having a number of issues. The enter key on the front keypad would not work. It would handomly turn the bluetooth on. The screen would not be bright while I was using it (the standy dim lighting).
The enter key on the slide out keyboard does work.
After the reflash everything worked great. Now I have used the phone for a week and this starts happening again. Sometimes restarting will get rid of these problems, but it still seems to be there.
I tried to update to Dr. Gonzo's 6.1 ROM, but I was unable to flash that one, I got an error saying the ROM is corrupt.
Do you think this may be a hardware problem?
Please let me know what you think,
Thanks,
GRoder
which ROM are you currently using?
Did you USPL the device before flashing WM6.1 ROM?
that is a necessary step.
Let us know after you flash doc's ROM.
And another one who didn't even care to read the readme or some threats...
frauhottelmann said:
And another one who didn't even care to read the readme or some threats...
Click to expand...
Click to collapse
oh come on man... play nice. some just don't know that search is your friend. They'll learn though.
frauhottelmann said:
And another one who didn't even care to read the readme or some threats...
Click to expand...
Click to collapse
hey hey, I did read both of the supplied read me files, however I'm sure sure that the updates UPL/SPL updates worked correctly. There is one step that I am unsure about.
bellor said:
oh come on man... play nice. some just don't know that search is your friend. They'll learn though.
Click to expand...
Click to collapse
yea I always use the search function in forums, why ask what 10 others have asked before.
I'm just curious if anyone has experienced a similar problem with their phone. I'm hoping this is not a hardware issue...
Nope, this is something for which people are opening a new threat every day, so I hope you can understand that I am a bit grumpy sometimes!
@groder54
There is one step that I am unsure about.
Click to expand...
Click to collapse
what is it?
prajith said:
@groder54
what is it?
Click to expand...
Click to collapse
I will try it again tonight when I get home. I think it was the step where I had to run the *.bat file with all the promts...at the end the phone did not behave like it said in the read me so I think something may have gone wrong at that point.
Hi!
I'm looking for a program that basically vibrate my phone when I get a SMS from sender X (not from Y or anyone else). But also vibrate the phone until I read the SMS.
I have been googling my ass off to find a program that will allow this but can't find any. So I gave up and decided that I will try to do it myself.
I have done some intermediate coding in VB6/VB.Net, more than basic C++ and very basic Java. Never coded anything to mobilephones.
Is this possible to do? If so, how hard? Do you think I will be able to do it?
The program should work on HTC S740 (WM6 Standard)
this is pretty basic and if you follow this forum for info you will be able to do it.
you can also base your work (and maybe add to) "MissedCallReminder" (http://forum.xda-developers.com/showthread.php?t=441593)... ask for the developer's help maybe..
vibrate use a lot of power
if you forgot or left it somewhere
your phone's batt would be flat in no time
nir36 said:
this is pretty basic and if you follow this forum for info you will be able to do it.
you can also base your work (and maybe add to) "MissedCallReminder" (http://forum.xda-developers.com/showthread.php?t=441593)... ask for the developer's help maybe..
Click to expand...
Click to collapse
Sounds good. But what do you mean that I can base my work on that since it's not open source? Or is it?
But MissedCallReminder seems good, just need some tweaking
Rudegar said:
vibrate use a lot of power
if you forgot or left it somewhere
your phone's batt would be flat in no time
Click to expand...
Click to collapse
Never thought about that... Still worth it or my boss will ask why I didn't answer
GlowGlow said:
Sounds good. But what do you mean that I can base my work on that since it's not open source? Or is it?
But MissedCallReminder seems good, just need some tweaking
Never thought about that... Still worth it or my boss will ask why I didn't answer
Click to expand...
Click to collapse
that's exactly what i meant. tweaking, not rewriting.
i'm using missedcallreminder and it's wonderful.
I would like to perfor reboot or restart (soft reset in Windows Mobile) withoit the power button, with a small application.
POWER OFF v3, available on Market doesn't work on Nexus1.
I cannot find one more...
Suggestion?
thanks
I use Reboot Control Widget and it works great for me!
It has several options:
Reboot Handset
Power Down
Recovery Console
Boot Loader
Wipe Handset
All work 100% of the time.
Root Required as with any reboot or power down command.
QuickBoot
u can download quickboot from market. it worls well on n1.
limkoksoon said:
u can download quickboot from market. it worls well on n1.
Click to expand...
Click to collapse
And its free
...or you can click Power+Trackball+Volume Down to reboot the phone.
uansari1 said:
...or you can click Power+Trackball+Volume Down to reboot the phone.
Click to expand...
Click to collapse
+1
no need for spacewasting apps
xPatriicK said:
+1
no need for spacewasting apps
Click to expand...
Click to collapse
Glad someone else sees it my way as well.
I could never understand why people get an app for a one step improvement...especially when it's already made so simple by the manufacturer.
uansari1 said:
Glad someone else sees it my way as well.
I could never understand why people get an app for a one step improvement...especially when it's already made so simple by the manufacturer.
Click to expand...
Click to collapse
quickboot however offer 2-click (1 open app, 1 choose option) access to "reboot" "reboot to recovery" "reboot to bootloader".
saves me the hassles of breaking my fingers each time trying to hit several butons at the same time
xPatriicK said:
+1
no need for spacewasting apps
Click to expand...
Click to collapse
Quick Boot is a whopping 29kb installed and is easier to use despite what some members think. Wasted space is space unused.
uansari1 said:
Glad someone else sees it my way as well.
I could never understand why people get an app for a one step improvement...especially when it's already made so simple by the manufacturer.
Click to expand...
Click to collapse
Well I for one love it, saves a lot of wear and tear on the buttons on my phone. Anything that will save the wear and tear on my phone is imo a good thing. I don't know why people would want to hit all the buttons to do a reboot, enter recovery and so on its a pain in the butt.
Ryanmo5 said:
Well I for one love it, saves a lot of wear and tear on the buttons on my phone. Anything that will save the wear and tear on my phone is imo a good thing. I don't know why people would want to hit all the buttons to do a reboot, enter recovery and so on its a pain in the butt.
Click to expand...
Click to collapse
So far, saving wear on the button is the best argument I've heard regarding such an app. That makes more sense... although I'd call HTC and get it repaired if that happened, which I doubt as the buttons seem durable enough. Anyway, your points are well-taken, but humbly disagreed with.
I recently got myself a free Galaxy S6 in topaz blue 32GB version. It was missing a battery so I put one in and it surprisingly seemed to work, well until some stuff started showing on the screen.
Unfortunately, the phone seems it can't mount any partitions whatsoever. Upon booting I get various messages about not being to able open or mount partitions, which unfortunately means I can't access the recovery menu. Have tried installing many different original softwares from various carriers but nothing seems to work. One thing which I did get working is TWRP, I managed to install it via odin, but now all the different storages show up as 0MB, tried various tips from youtube but none seem to work. I can push files to it via ADB but none can install due to no partitions being able to be mounted. I can't even wipe any partitions via odin. I'm starting to suspect the device probably had the storage encrypted somehow.
I've given up all hopes now , can someone please help me? Is there even any help for my device?
First off you should never have even rooted this device. When u root a device it voids all warranty. Second have you tried buying a different battery.
Serpent.king said:
First off you should never have even rooted this device. When u root a device it voids all warranty. Second have you tried buying a different battery.
Click to expand...
Click to collapse
To my knowledge, the device wasn't rooted as stated by the previous owner when I went to pick it up, and right now it is using a 1 year old battery so I don't think that's an issue.
Do you have a way to live stream the phone so I can walk you through a couple things.
Serpent.king said:
Do you have a way to live stream the phone so I can walk you through a couple things.
Click to expand...
Click to collapse
I could record a video/take pictures if that's what would be okay
catst22 said:
I could record a video/take pictures if that's what would be okay
Click to expand...
Click to collapse
Imma be needing to see the inside of TWRP so imma be guiding you Along and without live recording it makes it hard because i can be missing s lot of details
Serpent.king said:
Imma be needing to see the inside of TWRP so imma be guiding you Along and without live recording it makes it hard because i can be missing s lot of details
Click to expand...
Click to collapse
Ah okay, I may be able to get that done. What platform do you use so I can live stream it to you?
I use omlet arcade imma have to install it first and see if its gonna run well on this piece of crap
Serpent.king said:
I use omlet arcade imma have to install it first and see if its gonna run well on this piece of crap
Click to expand...
Click to collapse
My keypad is now typing by itself randomly lol
Serpent.king said:
I use omlet arcade imma have to install it first and see if its gonna run well on this piece of crap
Click to expand...
Click to collapse
Not too familiar with that but I've heard of it before. I'll have to make an account first but that's no big deal
Serpent.king said:
My keypad is now typing by itself randomly lol
Click to expand...
Click to collapse
Okay so I made an account and have set it up on my phone aswell, but I think my internet connection is either too slow or not stable enough because the stream keeps ending on me and freezing. I don't know how we could do this but would youtube do? Sorry I'm not good with these streaming things as I've never done it before lol