Related
Dear,
very sorry for this thread
I have problem to follow this page:
http://wiki.xda-developers.com/index.php?pagename=vox_uspl
First I start s710 and
1) Connect your device to your PC. Ensure it is connected to ActiveSync
now I follow step 2 and when end this program ask restart device
I use windows xp sp3
Dont restart it, just make sure there is no SD card in the phone
and carry on with step 3 etc
Hi..
work correctly.. Very thanks for all
Ehm..
sorry, for rom v2.2
I have to install sp1
Thanks
ericnet said:
Ehm..
sorry, for rom v2.2
I have to install sp1
Thanks
Click to expand...
Click to collapse
No need to install sp1..You can install this using any window OS.
This is how I did.Follow Instructions.
1) Connect your mobile with pc check whether its connected with active sync or not.
2) Use sda_application unlock.exe to unloc the mobile ..It will ask you to reboot.Dont reboot .Keep it as it is.
3)Then open uspl_116_jockyw.bat .Run it as administrator and it will as you to follow the instructions.just follow that .After all instructions the bat file will vanish.The screen of your mobile goes black.
4) Run Flash.exe from the ROM you downloaded.Wait for 10 mnts then it will reboot atomatically.
5) after reboot dont do anything ..Have some patience .it will do "cold reboot".It will take 5 mnts.
After this it will ask you to press OK to reboot .
Thats it .Enjoy Now.
Thanks
Yogusmilu
Dear,
very thanks.. now is ok
I know that a lot of you out there are like me and not a computer programmer. I am sure that I am not the first person to post something like this but I know that this is going to be the easiest.
To start you will need a formatted MicroSD Card (any size will do). If you do not have a spare MicroSD card, backup all your files on your current MicroSD Card to your PC then format it using your computer.
Also your MyTouch must be running on 1.5 (cupcake) software. If your MyTouch is not running on 1.5 (cupcake) go to this site to downgrade your phone to 1.5 (cupcake) http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
I know there are a lot of steps but it will take less then 10 minutes.
If links do not work copy and past in browser window
Steps:
1. Download this file “flashrec-1.1.2-20090909.apk” from this link http://code.google.com/p/flashrec/ (the file is on the right hand side of the screen) to your PC.
2. Download this file “cm-recovery-1.4.img” http://n0rp.chemlab.org/android/cm-recovery-1.4.img (click on link and save file) to your PC.
3. Copy both files to your formatted MicroSD Card.
4. Go to Android Market download and install “Linda File Manager”.
5. Go to “Setting” on your MyTouch
6. Go to “Applications”
7. Check “Unknown Sources” (this will allow you to install programs not from the Market)
8. Go to “Linda File Manager”
9. Go to “SD Card”
10. Click on “Linda File Manager” (when the pop up window appears)
11. Click and Run “flashrec-1.1.2-20090909.apk”
12. Click on “Backup Recovery Image” (once Backup Recovery Image is done move on to next step)
13. Clear out the text box and type in “/sdcard/cm-recovery-1.4.img"
14. Click on the “Flash Custom RecoveryImage” button (once Flash is
done move on to next step)
15. Click on “Home” button
16. Turn MyTouch off
17. Hold down the “Home” and “Power” button (keep holding it down until you see a Black screen with Green fonts)
18. If on the bottom of the screen you see “Build: CyanogenMod v1.4 +
JF” in White Font you have successfully Rooted you MyTouch
*if you interested in loading a custom ROM please continue. I recommend CyanogenMod. They are the best and it work well.
*this will result in a complete memory wipe. None of your existing data or installed software will be left.
19. Scroll down to and select “nandriod v2.2 backup”
20. Click on “Home” Key to continue (by doing this you have created a backup file that you can restore if something goes wrong)
21. Scroll up to “reboot system now”
22. Download “update-cm-4.2.5-signed.zip” from this link: http://n0rp.chemlab.org/android/update-cm-4.2.5-signed.zip (save the file when the pop up window appears)
23. Download “HTC_ADP_1.6_DRC83_rooted_base.zip” from this link: http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
24. Copy the downloaded files to your MicroSD Card.
25. Turn off Phone
26. Hold the “Home” and “Power” until you get to the screen with Black background and green font.
27. Scroll down to “wipe data/factory reset”
28. Click on “Home” Key (once wipe is down move on to next step)
29. Scroll up to “apply any zip from sd”
30. Select “HTC_ADP_1.6_DRC83_rooted_base.zip”
31. Click on “Home” Key (once install is done move on to next step)
32. Scroll up to “apply any zip from sd”
33. Select “update-cm-4.2.5-signed.zip”
34. Click on “Home” Key (once install is done move on to next step)
35. Scroll down to “wipe data/factory reset”
36. Click on “Home” Key (once wipe is down move on to next step)
37. Click on “reboot system now” (reboot will take longer then usual
due to new install)
38. Once reboot is complete your done.
I would recommend that you go to the Andriod Market download and install an Overclock program. It will improve the performance of your MyTouch.
Any question email me at [email protected]
nice
milelake2 said:
I know that a lot of you out there are like me and not a computer programmer. I am sure that I am not the first person to post something like this but I know that this is going to be the easiest.
To start you will need a formatted MicroSD Card (any size will do). If you do not have a spare MicroSD card, backup all your files on your current MicroSD Card to your PC then format it using your computer.
Also your MyTouch must be running on 1.5 (cupcake) software. If your MyTouch is not running on 1.5 (cupcake) go to this site to downgrade your phone to 1.5 (cupcake) http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
I know there are a lot of steps but it will take less then 10 minutes.
If links do not work copy and past in browser window
Steps:
1. Download this file “flashrec-1.1.2-20090909.apk” from this link http://code.google.com/p/flashrec/ (the file is on the right hand side of the screen) to your PC.
2. Download this file “cm-recovery-1.4.img” http://n0rp.chemlab.org/android/cm-recovery-1.4.img (click on link and save file) to your PC.
3. Copy both files to your formatted MicroSD Card.
4. Go to Android Market download and install “Linda File Manager”.
5. Go to “Setting” on your MyTouch
6. Go to “Applications”
7. Check “Unknown Sources” (this will allow you to install programs not from the Market)
8. Go to “Linda File Manager”
9. Go to “SD Card”
10. Click on “Linda File Manager” (when the pop up window appears)
11. Click and Run “flashrec-1.1.2-20090909.apk”
12. Click on “Backup Recovery Image” (once Backup Recovery Image is done move on to next step)
13. Clear out the text box and type in “/sdcard/cm-recovery-1.4.img"
14. Click on the “Flash Custom RecoveryImage” button (once Flash is
done move on to next step)
15. Click on “Home” button
16. Turn MyTouch off
17. Hold down the “Home” and “Power” button (keep holding it down until you see a Black screen with Green fonts)
18. If on the bottom of the screen you see “Build: CyanogenMod v1.4 +
JF” in White Font you have successfully Rooted you MyTouch
*if you interested in loading a custom ROM please continue. I recommend CyanogenMod. They are the best and it work well.
*this will result in a complete memory wipe. None of your existing data or installed software will be left.
19. Scroll down to and select “nandriod v2.2 backup”
20. Click on “Home” Key to continue (by doing this you have created a backup file that you can restore if something goes wrong)
21. Scroll up to “reboot system now”
22. Download “update-cm-4.2.5-signed.zip” from this link: http://n0rp.chemlab.org/android/update-cm-4.2.5-signed.zip (save the file when the pop up window appears)
23. Download “HTC_ADP_1.6_DRC83_rooted_base.zip” from this link: http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
24. Copy the downloaded files to your MicroSD Card.
25. Turn off Phone
26. Hold the “Home” and “Power” until you get to the screen with Black background and green font.
27. Scroll down to “wipe data/factory reset”
28. Click on “Home” Key (once wipe is down move on to next step)
29. Scroll up to “apply any zip from sd”
30. Select “HTC_ADP_1.6_DRC83_rooted_base.zip”
31. Click on “Home” Key (once install is done move on to next step)
32. Scroll up to “apply any zip from sd”
33. Select “update-cm-4.2.5-signed.zip”
34. Click on “Home” Key (once install is done move on to next step)
35. Scroll down to “wipe data/factory reset”
36. Click on “Home” Key (once wipe is down move on to next step)
37. Click on “reboot system now” (reboot will take longer then usual
due to new install)
38. Once reboot is complete your done.
I would recommend that you go to the Andriod Market download and install an Overclock program. It will improve the performance of your MyTouch.
Any question email me at [email protected]
Click to expand...
Click to collapse
nice n easy big guy..
good job..
very very good job!
i have a little problem, i put in my sdcard flashrek.apk, recovery-RA-dream-v1.2.3.img, and cm-recovery-1.4.img, after success intalled the flashrecovery.apk, i click on "backup recovery image" a dont work, but write this message, "backup failed: could not run command."
i arrived on the step "12" and i have this problem....how i can resolve?
before to proceed with this guide i've formatted the sdcard....
my htc its magic vodafone 32B android donut 1.6, Hboot-1.33.0007
Radio-2.22.19.26I, CPLD-10
thank's in advance for help
Ill write you an app for this if you pay me Sniggers.....
i shall soon be having a rooting method in my software for mytouch
hi reedmdc, but im not understand your msg.....i pay you to root my magic with your software?...or what?..please explain me...thank' s...
iaio72 said:
very very good job!
i have a little problem, i put in my sdcard flashrek.apk, recovery-RA-dream-v1.2.3.img, and cm-recovery-1.4.img, after success intalled the flashrecovery.apk, i click on "backup recovery image" a dont work, but write this message, "backup failed: could not run command."
i arrived on the step "12" and i have this problem....how i can resolve?
before to proceed with this guide i've formatted the sdcard....
my htc its magic vodafone 32B android donut 1.6, Hboot-1.33.0007
Radio-2.22.19.26I, CPLD-10
thank's in advance for help
Click to expand...
Click to collapse
If you are running 1.6 you have to downgrade to 1.5. Please read the first couple of paragraphs to downgrade. It is easy.
When can we root the official SenseUI please?
milelake2 said:
If you are running 1.6 you have to downgrade to 1.5. Please read the first couple of paragraphs to downgrade. It is easy.
Click to expand...
Click to collapse
not is easy to downgrade to 16.......>to 1.5......
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
limkoksoon said:
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
Click to expand...
Click to collapse
yes please, but where i find the original ruu rom vodafone 1.5 cupcake to flash it?
thanks
this ROM its good for my magic 32b voda?
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver
thanks
limkoksoon said:
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
Click to expand...
Click to collapse
the problem its i dont have root...and i cant flash somes rom,,,i can flash only original, i think,,,
iaio72 said:
this ROM its good for my magic 32b voda?
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver
thanks
Click to expand...
Click to collapse
NO!
Updates in RUU-format are compatable ONLY with 32A Magics
5[Strogino] said:
NO!
Updates in RUU-format are compatable ONLY with 32A Magics
Click to expand...
Click to collapse
thanks for answer
Thank you so much
Will this work for HBOOT-1.33.0006 (SAPP30000) ?
As bad as it is. .. .Me and you are in the same page. The only problem is that I already bricked my first NTT DOCOMO HTC MAGIC(Later on converted to MT3G before I bricked it). Right now, I finally got a replacement from DOCOMO however, those punks came updated the fw already when they give me the replacement. I manage to root my fone via gold card then unrooted again thanks to unlockr.com but then I got caught up messing with the terminal. Just like that my phone just went away. I have a perfected SPL .000006 and with fw of 1.6. This punks keep saying its so easy, I think they're full of crap. Instead of just throwing garbage at you why not be specific in what they talking about. I have tried to load all kinds of recovery images on this thing but no joy. Donut actually has a built in recovery image ( I think it only has like four options, which are purely useless) One last thing that I need to try is probably go back to gold card method but the problem is I havent seen a single one perform this act. Again, I am coming from a stock perfected SPL .00006/official fw 1.6. If you guys can be kind enough to at least lead us the right way, Im pretty sure that we'll handle the rest. Please no garbage reply. Thank you.
i just used this tutorial to root and install MLIGN's HERO 3.0 on my brother's mytouch and it worked great the first time!
thanks!
rlee
VerY good Post I this need to be in the Wiki....
Ok, that worked, but need a little help from anyone.
I followed these instructions on my MyTouch 3g and did also install the suggested ROM.
However, after installing the rom I realized there are more recent releases out there. If I wanted to install a newer rom do I have to redo each step?
I have CyanogenMod-4.2.13 and update-cm-4.2.13-signed on my spare SD card.
Another question I had (which maybe irreverent at the moment...) after step 17 I did see '“Build: CyanogenMod v1.4 +JF” giving me root access. However, when I did try to install and launch a overclock utility that requires root, it said I do not have root access. Am I missing something?
I recently attempted to install WP7 on my tmobile uk HD2,i followed a list of simple instructions but have ran into some problems! Below are the instructions i followed :
If you have had enough details and want to install Windows Phone 7 to your HD2 right away, you can refer to the videos for the download instructions. Though for those of you who have trouble following those instructions, here is what you will need to do:
1.Download the Windows Phone 7 ROM from the link given below and extract its contents to your computer.
2.Make sure that you have HARDSPL 2.08 installed as it is required before you can install MAGLDR in the next step. Also note that your radio needs to be 2.**.50.**. A recommended 2.15.50.14 radio can be found here.
3.Connect your HD2 to your computer via USB and run ‘ROMUpdateUtility.exe’ from the MAGLDR 1.2 folder at the location where you extracted the ROM in Step 1.
4.Follow the on-screen instructions to install MAGLDR on your HD2 and reboot your phone. Your phone will boot into MAGLDR now.
5.Navigate to the 5th option which says ‘USB Flasher’ using the volume-down key and press the green ‘call’ key to enter it.
6.Now run ‘DWI.exe’ from the folder where you extracted the ROM.
7.Read the information carefully and follow the on-screen instructions to flash the Windows Phone 7 ROM to your HD2.
8.Once the installation is complete, your phone will reboot into MAGDLR again. Use the volume-down button to the second option that says ‘Boot AD NAND’ and press the green ‘call’ button.
9.Your phone will now boot into the newly installed Windows Phone 7. The first boot may take a while. Follow the on-screen instructions to setup your Windows Phone 7 installation for the first time.
10.Follow this guide to get Live Services including Marketplace and XBox Live fully working on your device.
Congratulations – you now have Windows Phone 7 running natively on your HTC HD2. Though having to select the second option from MAGLDR every time you restart your phone to boot into Windows Phone 7 can be a hassle. Fortunately, you can set MAGLDR to automatically boot your phone into Android each time you restart it.
I got as far as step 8. My phone did not reboot as it says it will and now i cant do anything with the device apart from make calls from the WP7 os on my phone.
Can any1 help me progress from this problem or to enable me to further enable WP7.
If all else fails can someone post a dumb f**ks guide on how to get back to win 6.5?
ANY HELP WOULD BE MOST APPRECIATED THANKS GUYS
Hi to all
i installed wp7 on my hd2 but i hate it because
1.i cant send and recive bluetooth
2.there is no file manager
3.i cant open my sd card
4. i cant sync my phone with pc
5.when i want to do anything it connects to internet
so i want to uninstal wp7 from my hd2 and install wp6.5 on it
plz help me how can i do this ?!
answer me by email : [email protected]
tnx
all u have to do is to restart ur hd2 in recuvry mode by holding dwn vol buttom and power than connct it to ur pc and lanch the wm 6.5 rom.
it s all
Hiya!
So, I am no android beginner, but to me there seems to be a continual branching off & fragmentation (and obsolescence) in tutorials, howto's etc etc.
This is what I have: UK T-mobile G1, running Android 1.6, build DRC92
This is what I want: UK T-mobile G1, running Android 2.2 or higher
This is what irritates me: 1001 different tutorials, each of which (wrongly) *assume* you know what you are doing with this particular handset
I know what I am doing with ZTE, and Android OS in general, but I want to get this CLEAR, as clear as crystal, and I want to do it by following a SIMPLE, non-ambiguous, non-assuming tutorial. That SHOULD be simple, but it seems not.
I need to upgrade "SPL" and "RADIO". I need this explaining please, in as much detail as you can, if you don't mind?
I am sorry to sound demanding, but this whole process is a minefield of conflicting opinions, geek ego battles and preferences... and ALL I wanna do is upgrade!
Please, any help?
PLEASE: I ask that you don't just simply link me to other tutorials, as I am confused about how to do this, and that will just set me back to square one again. If you are able to spare a few minutes to explain what to do, I would be most grateful.
Thank you!
It is hard not to link you to the instruction that is already there. But I do understand your frustration. When I first started I had the same (similar problem) and end up following one of the instruction. FYI, the only links I posted is the recommended Froyo ROM. It has Android 2.2.1.
Simply put, here is from Instruction I have when I first rooted my G1:
Disclaimer:
WARNING: I am not responsible if you did something to brick your phone.
Disclaimer:
I FOUND THIS TO BE THE EASIEST METHOD OF ROOTING A G1 AND INSTALLING A STABLE BUILD OF FROYO.
THIS IS DESIGNED FOR THE COMPLETE BEGINNER!!
I HAVE THIS ON MY G1 WITH NO PROBLEMS AT ALL!!!
Rooting Your Stock T-Mobile G1 (HTC DREAM) AND INSTALLING A STABLE ANDROID 2.2 FROYO BUILD.
**Please make sure your phone is completely charged before doing this**
**I am not responsible for anything that happens to your phone. Do this at your own risk**
---------------------------------------------------------------------------------------------
I was pretty worried about bricking my phone, but it is almost impossible if you do this step by step and correctly. Just make sure to follow the steps!
---------------------------------------------------------------------------------------------
Prerequisites:
**ALL DATA/APPLICATIONS WILL BE REMOVED FROM YOUR PHONE AND IT WILL BE RETURNED TO FACTORY SETTINGS AFTER THE FOLLOWING STEPS. MAKE SURE YOU HAVE SYNC SET UP FOR YOUR DATA SO THAT YOU CAN RECOVER YOUR CONTACTS!** (TO SYNC GO TO SETTING > DATA SYNChronization > make sure AUTO SYNC is checked as well as contacts calendar and gmail)
Here is what you will need:
1) Your Phone
2) A Computer
3) USB Cable
Download the following file onto your computer: (DO NOT UNZIP OR CHANGE ANY FILES!)
ALL THE LINKS TO DOWNLOAD THE FILES ARE HERE: pktos.blogspot.com
Original DREAIMG.nbh (make sure you download the UK version)
Cupcake Update.zip
FlashRec.apk
Amon Ra’s Recovery Image
G1 Radio
G1 HardSPL
Generic G1 ROM w/ Root
GAPPS (if you wants it)
ALL THE LINKS TO DOWNLOAD THE FILES ARE HERE: pktos.blogspot.com
---Froyo ROM---
Recommended Froyo ROM: Froyo Melt with custom theme or DreamTem Froyo.
---Froyo ROM---
-------------------------------------------------------------------------------------------
I) Formatting the SD Card and Downgrading to RC29(YOU WILL DELETE EVERYTHING OFF YOUR SD CARD!)
1. Plug your USB cable into your computer and then plug your phone in.
2. Mount your SD card by sliding down the notification bar and selecting mount.
3. Go to My Computer and access your SD card.
4. BACKUP ANY FILES THAT YOU WANT ONTO YOUR COMPUTER. VERY IMPORTANT!
5. Go back to my computer and right click on the drive that is your sd card. Click format. Choose FAT32 from the drop down and hit the format button. This removes all data from your memory card.
6. Once the format is complete: drag and drop "DREAIMG.nbh & Update.zip files that you downloaded into the sd card. (DO NOT create a folder or anything, just put it right in the SD card)
7. Unmount your phone by going through the notification bar and then unplug your phone Turn your phone off. from your computer.
8. Press and hold the camera+end key until until you see a screen with colored bars, then let go. This is the bootloader. The screen will turn gray with blue writing on it.
9. Hit the end key to start the update. DON'T DO ANYTHING UNTIL THIS IS DONE!
10. Once it is finished it press the trackball to reboot. (If it goes back the the colored bar screen and doesn't reboot try holding the home+menu+end key, if this doesn't work, just remove the batter and put it back in and turn the phone on)
11. Once the phone is on, just turn it back off.
12. Now press the Home+End Key until you see a triangle with an exclamation point in it (this is recovery mode). Once you see this let go of the buttons.
13. Open the keyboard and press ALT and L, and then Press ALT and S. Now wait until the phone reboots (it will do this automatically once the update is applied) (Don't worry if you see picture of a box and a g1 or a chip with an arrow)
14. Once the phone reboots, go ahead and and go through the welcome guide and get to the home screen.
II) Flashing a Recovery Image
1. Now with your phone at the home screen, go to settings>applications> an turn on unknown sources.
2. Now go to settings>SD card and Phone Storage>Unmount SD Card
3. Now Click format sd card and go ahead and format your sd card. It will automatically remount after.
4. Go back to the home screen and plug and mount the phone to the computer again as you did earlier.
5. Place the following files you downloaded earlier right into the sd card: FlashRec.apk, and Amon Ra's Recovery Image (Again not in any folder or anything, just on the sd card)
6. Once they are transferred go ahead and unmount and unplug your phone from the computer
7. Go and download a file manager from the android market (I suggest LINDA FILE MANAGER)
8. Once downloaded, open the file manager and go to SD card, and click the FlashRec.apk file and then click install. If it asks -> Tell it to use package installer to open it (it probably wont ask but if it does)
9. Once installed click open (it will be on bottom left of screen)
10. Then click the button that says "backup recovery image"
11. Once it says "backup complete" open the keyboard and type the following: /sdcard/recovery.img
12. The click "flash custom recover image" and wit until it says "Flash complete"
13. Go back to the home screen and then turn off the phone.
14. Turn the phone back on into recovery mode by holding down the home and power buttons. You will see a bunch of text on top of a black background with an HTC logo in the middle.
III) Partitioning and Loading the latest radio
1. Scroll down to "Partition SD Card"
2. Click "Partition SD"
3. Press the Home key to confirm
4. Use the trackball to increase the "swap size" to 96MB then press Home key
5. Make sure "EXT2" is set to 512 MB then Click the Home Key
6. Make sure "Fat32 size" is set to remainder and then press the Home Key and then the phone will begin partitioning.
7. Once partitioning is complete scroll down and select to "SD: ext2 to ext3" and then press the Home key. Wait for it to upgrade.
8. Once the Upgrade is complete hit the "back" button to get back to the main menu. Then scroll down and select "USB-MS Toggle" and wait for it to enable.
9. Now plug the phone into the computer again. Now transfer the files downloaded earlier: G1 Radio, G1 HardSPL, Generic G1 Rom w/ root, to the phone. (AGAIN KEEP THE FILES JUST IN THE SD CARD AND NOT IN A FOLDER OR SOMETHING)
10. Once the transfer is complete hit the Home key to disable the USB-MS toggle and return back to the main menu of recovery mode. Unplug your phone.
11. Scroll down and select "Flash .zip from SDcard"
12. Select the G1 Radio file (named OTA Radio or something like that) and hit the Home key to confirm. DO NOT SELECT ANY OTHER FILE, THE RADIO MUST BE DONE FIRST.
13. Once the Radio Flash is complete Press Home+Back to reboot the phone. It will then say "writing radio image" and then reboot back into recover mode (this will take some time)
14. Once back into recovery mode, scroll and select "Flash zip from SDcard" again.
15. This time choose the SPL file (named somthing like "Latest G1 SPL.zip") and then click the HOME KEY to confirm.
16. Once it finishes, hit HOME+Back to reboot once again. It will say "writing boot image" and then reboot
back to recovery mode.
17. Once again scroll to "Flash zip from SDCard" and choose the Generic G1 Rom file (Named something like Generic G1 Root Rom.zip) and click Home to confirm and wait for it to finish.
18. Once finished it should go back to the main menu and say"Install from SD card complete"
19. Now click on the "Reboot System Now" choice. (Home+Back)
20. Wait for the phone to reboot back into Android.
IV)Installing ROM (Android 2.2.x Froyo for HTC DREAM)
1. Once back into Android, turn the phone back off.
2. Hold the Home+Back keys to turn the phone on and get it back into recovery mode
3. Select "USB-MS Toggle" and wait for it to enable
4. Once enabled, plug your phone in and transfer the CYANOGENMOD6 and GAPPS file ito your SD card/phone. (again not in any folder, just in the sd card)
5. Once the files are transferred, press the Home key to disable USB-MS Toggle and return to the main menu, and then unplug your phone.
6. Scroll down and select "wipe" and then select "wipe data / factory reset" and then hit the Home key to confirm. Wait for it to finish the wipe. It will say "Data wipe complete"
7. Hit the back key to return to the main menu.
8. Scroll and select "Flash Zip from SDCard"
9. Select the ROM Named that you have downloaded and hit Home to confirm and wait for it to finish.
10. Once finished it will go back to the main menu and say "Install from SD Card Complete"
11. Go back to "Flash Zip from SDCard"
12. Select the Gapps File Named something like "gapps-mdpi-FRF91-3-signed.zip" and click home to confirm.
13. Once it is finished you should be back at the main menu. Select "Reboot System Now" and wait for the phone to reboot.
14. The reboot will take some time, (roughly 5-10 minutes) so don't freak out. Just put your phone down and go do something =)
CONGRATS! YOU have successfully rooted your G1 and installed ANDROID 2.2.x Froyo
Click to expand...
Click to collapse
BeenAndroidized said:
It is hard not to link you to the instruction that is already there. But I do understand your frustration. When I first started I had the same (similar problem) and end up following one of the instruction. FYI, the only links I posted is the recommended Froyo ROM. It has Android 2.2.1.
Simply put, here is from Instruction I have when I first rooted my G1:
Disclaimer:
WARNING: I am not responsible if you did something to brick your phone.
Disclaimer:
Click to expand...
Click to collapse
My build is DRC92, and from what I gather, I need a "gold card" (impossible to find somewhere to generate the image!)
I give up.
Have you try this software to create Goldcard?
http://forum.xda-developers.com/showpost.php?p=11655667&postcount=1
BeenAndroidized said:
Have you try this software to create Goldcard?
http://forum.xda-developers.com/showpost.php?p=11655667&postcount=1
Click to expand...
Click to collapse
Okay. I finally got revskills site to send me a goldcard IMG. All updated, just putting FroSense 10 on now.... MAN. It takes AGES to boot first time! lol
Thank you for helping me! God bless you.
glossywhite said:
Okay. I finally got revskills site to send me a goldcard IMG. All updated, just putting FroSense 10 on now.... MAN. It takes AGES to boot first time! lol
Click to expand...
Click to collapse
Yes, it does take time for the first boot, especially FroSense. Glad you got it going though.
glossywhite said:
Thank you for helping me! God bless you.
Click to expand...
Click to collapse
Glad to be of services... And anytime...
glossywhite said:
Hiya!
So, I am no android beginner, but to me there seems to be a continual branching off & fragmentation (and obsolescence) in tutorials, howto's etc etc.
This is what I have: UK T-mobile G1, running Android 1.6, build DRC92
This is what I want: UK T-mobile G1, running Android 2.2 or higher
This is what irritates me: 1001 different tutorials, each of which (wrongly) *assume* you know what you are doing with this particular handset
I know what I am doing with ZTE, and Android OS in general, but I want to get this CLEAR, as clear as crystal, and I want to do it by following a SIMPLE, non-ambiguous, non-assuming tutorial. That SHOULD be simple, but it seems not.
I need to upgrade "SPL" and "RADIO". I need this explaining please, in as much detail as you can, if you don't mind?
I am sorry to sound demanding, but this whole process is a minefield of conflicting opinions, geek ego battles and preferences... and ALL I wanna do is upgrade!
Please, any help?
PLEASE: I ask that you don't just simply link me to other tutorials, as I am confused about how to do this, and that will just set me back to square one again. If you are able to spare a few minutes to explain what to do, I would be most grateful.
Thank you!
Click to expand...
Click to collapse
Well first of all this isn't Q&A this is a development section, second look for the guide in the dev section, its easy to follow and not complicated at all, download a few files, blah blah blah your done. Took me 5 minutes.
Sent from my T-Mobile G1 using XDA App
i won`t go down to rc29. on market is an application named universal androot which works on htc dream ( 1.5 and higher ). this will root your phone but until you`ll restart the phone, you`ll have to flash recovery image ( amon-ra-1.7.0 ). after you restart your phone and still have root privilegies, that`s a good moment to change SPL. ezTerry`s tutorial i think is the best there is.
flash another rom. i am using now Nameless jedi`s rom maybe because i find it the best or just because i`m a star wars fan
i did not covered it all in this post ( i`m pretty sure ) so if your stuck in there somewhere ( android related ) you can IM me anytime. maybe we`ll even try a live installfest
p.s. the dreaimg.nbh is a "good to have" file. although i hope you`ll never use it.
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.
Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.
CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks
Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.
Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7
CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU
It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?
Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?
Thank you, on the very detailed,
Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]
t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??
Hi has anyone the firmware of cubot c7 ....