I recently attempted to install WP7 on my tmobile uk HD2,i followed a list of simple instructions but have ran into some problems! Below are the instructions i followed :
If you have had enough details and want to install Windows Phone 7 to your HD2 right away, you can refer to the videos for the download instructions. Though for those of you who have trouble following those instructions, here is what you will need to do:
1.Download the Windows Phone 7 ROM from the link given below and extract its contents to your computer.
2.Make sure that you have HARDSPL 2.08 installed as it is required before you can install MAGLDR in the next step. Also note that your radio needs to be 2.**.50.**. A recommended 2.15.50.14 radio can be found here.
3.Connect your HD2 to your computer via USB and run ‘ROMUpdateUtility.exe’ from the MAGLDR 1.2 folder at the location where you extracted the ROM in Step 1.
4.Follow the on-screen instructions to install MAGLDR on your HD2 and reboot your phone. Your phone will boot into MAGLDR now.
5.Navigate to the 5th option which says ‘USB Flasher’ using the volume-down key and press the green ‘call’ key to enter it.
6.Now run ‘DWI.exe’ from the folder where you extracted the ROM.
7.Read the information carefully and follow the on-screen instructions to flash the Windows Phone 7 ROM to your HD2.
8.Once the installation is complete, your phone will reboot into MAGDLR again. Use the volume-down button to the second option that says ‘Boot AD NAND’ and press the green ‘call’ button.
9.Your phone will now boot into the newly installed Windows Phone 7. The first boot may take a while. Follow the on-screen instructions to setup your Windows Phone 7 installation for the first time.
10.Follow this guide to get Live Services including Marketplace and XBox Live fully working on your device.
Congratulations – you now have Windows Phone 7 running natively on your HTC HD2. Though having to select the second option from MAGLDR every time you restart your phone to boot into Windows Phone 7 can be a hassle. Fortunately, you can set MAGLDR to automatically boot your phone into Android each time you restart it.
I got as far as step 8. My phone did not reboot as it says it will and now i cant do anything with the device apart from make calls from the WP7 os on my phone.
Can any1 help me progress from this problem or to enable me to further enable WP7.
If all else fails can someone post a dumb f**ks guide on how to get back to win 6.5?
ANY HELP WOULD BE MOST APPRECIATED THANKS GUYS
Hi to all
i installed wp7 on my hd2 but i hate it because
1.i cant send and recive bluetooth
2.there is no file manager
3.i cant open my sd card
4. i cant sync my phone with pc
5.when i want to do anything it connects to internet
so i want to uninstal wp7 from my hd2 and install wp6.5 on it
plz help me how can i do this ?!
answer me by email : [email protected]
tnx
all u have to do is to restart ur hd2 in recuvry mode by holding dwn vol buttom and power than connct it to ur pc and lanch the wm 6.5 rom.
it s all
Hello, i purchased android phone called FG8 (Fly Ying) and wifi wont connect sometimes or its stuck on ip, works on some routers and not on majority so i am looking for custom ROM to fix this if its possible.
Does anyone know any roms that are compatible with these devices here are specs:
CPU: Mediatek MTK6516 416 MHz processor
Baseband: MAUI.10A.W10.48.MP.V5.F1, 2011/01/27 16:48
Kernel version: 2.6.32.9
Build number:
ALPS.10Y.W10.48.MP.V1.06.2.04
Thank for help in advance am killing my self to find rom on net for this junk.
Replace your router or AP.
FG8 Wireless is stable with other routers.
All FG8 phones has same MAC!
Is there official firmware download page i think i messed up my firmware and if i do fac reset it remains the same?
wizzardz01 said:
Is there official firmware download page i think i messed up my firmware and if i do fac reset it remains the same?
Click to expand...
Click to collapse
I have messed mine too. I've talked to the people who sold it to me, and they have replied they are going to talk to the manufacturer to see if we can get the firmware and the needed update cable. I'm expecting a reply tomorrow. If I get the firmware and the instructions and tools to flash it, I'll post again.
firmware
hi, i've the same phone and i asked for the firmware....
they sent me this link, but i don't have any idea/instruction in what i've to do in order to flash it to my phone (maybe we need another cable?),
i hope somebody can figure out how to use it (and maybe explain what i've to do...)
sorry but i can't post the link, it's inside the attached file
Where does one get the 65xx Android Phone USB drivers?? Can't seem to find any on the web
oxyre said:
hi, i've the same phone and i asked for the firmware....
they sent me this link, but i don't have any idea/instruction in what i've to do in order to flash it to my phone (maybe we need another cable?),
i hope somebody can figure out how to use it (and maybe explain what i've to do...)
sorry but i can't post the link, it's inside the attached file
Click to expand...
Click to collapse
It's easy, open the txt file with notepad and look for "HYPERLINK" into the document. You'll see a multiupload link after it.
Is it possible to install WM 6.5 on FG8 android ??????????
if it possible which rom ????????????
Another ROM:
http://www.megaupload.com/?d=TILCY50P
NOT TESTED BY ME!
reinstall android 2.2 OS
well ,i get FBI antipracy notice or somthing
so, i ask the question again
can i reinstall the android 2.2 on this phone ,im having problem with the VOICE SEARCH , it give the errors ,how can i get rid of this app or make it to work
Try this ROM:
http://www.multiupload.com/T5HANXLGAO
Instructions:
1- Turn off the phone
2-Connect the phone to PC and install the driver. “Driver - USB VCOM Driver (binary)4”
3-Disconnect the phone from PC.
3- Open: ..\FG8 Android 2.3.1 with tools\SP Flash Tool exe_v1.1052.03\Flash_tool.exe
4- Connect the phone to PC and quick select in Flash_tool the COM port (you have seconds).
5.Click menu “file“ to choose “Open download agent file”, choose “MTK_AllInOne_DA.bin”; Then click menu “file“ to choose “Open Scatter-Loading Files”, choose “MT6516_Android_scatter.txt”;
6. Take off “PRELOADER” from de list.
7. Disconnect and connect the phone to PC.
8. Quick, after the sound Windows makes when something have been connected, press F9 or click "Download", don't worry the phone will keep connected until the process finish.
9. Power the phone (that will take some time).
you will have now custom recovery, too.
netomx said:
Try this ROM:
http://www.multiupload.com/T5HANXLGAO
Instructions:
1- Turn off the phone
2-Connect the phone to PC and install the driver. “Driver - USB VCOM Driver (binary)4”
3-Disconnect the phone from PC.
3- Open: ..\FG8 Android 2.3.1 with tools\SP Flash Tool exe_v1.1052.03\Flash_tool.exe
4- Connect the phone to PC and quick select in Flash_tool the COM port (you have seconds).
5.Click menu “file“ to choose “Open download agent file”, choose “MTK_AllInOne_DA.bin”; Then click menu “file“ to choose “Open Scatter-Loading Files”, choose “MT6516_Android_scatter.txt”;
6. Take off “PRELOADER” from de list.
7. Disconnect and connect the phone to PC.
8. Quick, after the sound Windows makes when something have been connected, press F9 or click "Download", don't worry the phone will keep connected until the process finish.
9. Power the phone (that will take some time).
you will have now custom recovery, too.
Click to expand...
Click to collapse
didnt understand the step 6 ,from which list ??????
when i click download it ask me '' open flash bin before download ''??????
seems like the files are incomplete ,no good
mastmalang70 said:
seems like the files are incomplete ,no good
Click to expand...
Click to collapse
Have you even try it?? It seems you don't.
okay ,i think i have found the problem ,when i connect my device ,installing driver ,that goes fine ,suppose i get com port 4 , when i open the flash tool ,reconnect the device the flash tool doesnt give me that port to read the device ,
it gives like com 3, com 5, till com 10
but always hide the no my device is connected ,
this i tried on my laptop running win7 64 bit and other pc running win7 32 bit
now what ????????
mastmalang70 said:
okay ,i think i have found the problem ,when i connect my device ,installing driver ,that goes fine ,suppose i get com port 4 , when i open the flash tool ,reconnect the device the flash tool doesnt give me that port to read the device ,
it gives like com 3, com 5, till com 10
but always hide the no my device is connected ,
this i tried on my laptop running win7 64 bit and other pc running win7 32 bit
now what ????????
Click to expand...
Click to collapse
Well, if you didn't noticed, the com port will be available JUST FOR A FEW SECONDS... prepare the software, and then, connect the cell phone... the port will be available just for a few seconds
sorry but this is not working with me
thanks for the help
mastmalang70 said:
sorry but this is not working with me
thanks for the help
Click to expand...
Click to collapse
Why not? try opening device manager and then connect the cell phoen.. check if you need drivers
......................
...................................
hi,
tried all method for rooting but didnt get sucess my lg have gingerbird 2.3.4 i cant root it in any way always giving error are you root?
DONE FULL RESET ALSO BUT NO LUCK
FOLLOWED PROCEDURE AS WRITTEN HERE
http://forum.xda-developers.com/showthread.php?t=1222630
LET ME KNOW WEATHER 2.3.4 CAN B ROOTED OR NOT>
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I rooted my LG-C660 by LG Esteem:
1.- You need to install the phone USB drivers (They are usually in the SD Card when they are new).
2.- If your pc has Windows 7, restart it, press f8 when starting and choose the "Disable Driver Signature Enforcement" option. Your pc will load normally. (If you don't have windows 7 just skip this step).
3.- When the computer is ready, put the phone in USB depuration mode (Settings-> apps -> Development). Connect it to the USB port and be sure your computer recognize it well.
4.- Download LG Esteem. I can't post the URL but go to google and paste this "LG_Esteem_Root.zip mediafire" , you will find it in the first link.
5.- Unzip and run "Run.bat". The program will start. Just follow the on-screen instructions and after seconds it will be rebooted. After this, your phone it's going to be rooted and you will find the Superuser app.
Try it, hope it helps you.
Angenit said:
I rooted my LG-C660 by LG Esteem:
1.- You need to install the phone USB drivers (They are usually in the SD Card when they are new).
2.- If your pc has Windows 7, restart it, press f8 when starting and choose the "Disable Driver Signature Enforcement" option. Your pc will load normally. (If you don't have windows 7 just skip this step).
3.- When the computer is ready, put the phone in USB depuration mode (Settings-> apps -> Development). Connect it to the USB port and be sure your computer recognize it well.
4.- Download LG Esteem. I can't post the URL but go to google and paste this "LG_Esteem_Root.zip mediafire" , you will find it in the first link.
5.- Unzip and run "Run.bat". The program will start. Just follow the on-screen instructions and after seconds it will be rebooted. After this, your phone it's going to be rooted and you will find the Superuser app.
Try it, hope it helps you.
Click to expand...
Click to collapse
Thanks a lot! :good:
It helped my friend's phone removing some stock apps that he never uses. The next step will be the solution to the lack of ram, but that will be another story. A new custom rom maybe...or a new phone.
MICROMAX A78 ROOTED!!!
Guys!!! Micromax a78!! rooted!!!
So, here are the steps on getting root access on MICROMAX A78-
What you need
1. MICROMAX A78, data usb cable.
2. Download the Rooted Boot image file from the attachment below this post.
3. Download SP Flash Tool v2.1 from HERE.
4. Download MTK65xx Driver from HERE.
5. Download the MTK6573 Scatter.txt file from the attachment below this post.
6. Lastly download SuperOneClick root application for windows (search google), and install it...it will also install the adb drivers needed while rooting.
Installation Steps-
1. Unzip and Install the MTK65xx USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and connect using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Do not switch on the phone
2. Copy the "rootedboot.img" file that you downloaded from my attatchment. Rename it to be boot.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6573_Android_scatter. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "BOOT". Leave boot checked. Now click on the "BOOT" just right to the checkbox and browse and select the boot.img (which was earlier rootedboot.img) file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this then Congrats You have flashed the unlocked boot.img!
NOW FOR ACTUAL ROOTING:
1. Restart your phone, now when the phone boots up, enable "usb debugging".
2. Now run SuperOneClick, and click "root"..after the process finishes, the a78 will be fully rooted with Superuser app installed!!.
Check by installing root checker from play store!!!
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits!
I, Me, Myself
GUYS! If u think my hardwork is worth something, do press the "Thanks" button below! Thank You! :fingers-crossed:
awesome work !!!
thankyou buddy !!! my phone is finally rooted now waiting for a custom recovery ........
I'll also make a custom recovery if you are interested
Sent from my Micromax A110 using xda app-developers app
I will post the result after testing your method on my A78. Lets hope for something good
Bro!! You are the best.. Thanks a lot!!!
abs_dear said:
Bro!! You are the best.. Thanks a lot!!!
Click to expand...
Click to collapse
That's good to know! Any problems anybody faces,m always there
Sent from my Micromax A110 using xda app-developers app
WOOT WOOT
vshlkmr buddy you are the BEST :good:
i tried with SOC bt didnt wrk..n i ws worried to play with SP flash tool coz i dnt hv any alternt phone...excellent job man...
will root my phone ASAP n let u know if i get any problms..
it'll be perfect if you can provide CWM recovery...
THANKS again..
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
paramjeetgem said:
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
Click to expand...
Click to collapse
Ok, I am able to resolve this by Disabling Searching Windows Update for Device Drivers.
And, YES, I have rooted my A78
Big Big Thanks to vshlkmr
Phone Finally from rotted to Rooted
Thanks Buddy...
Phone is finally of some use now.
vshlkmr said:
I'll also make a custom recovery if you are interested
Click to expand...
Click to collapse
Yes, we are very interested. please make a custom recovery for a78.
Thanks
Hello today I ported CWM for the ISA A19Q.
Please let me know if it works for you!
Feel free to hit the thanks button.
Currently I'm almost done with the custom rom MIUI.
I am planning to release it next week. I want to know if the recovery works fine for everyone
so I can release it next week and everybody can install it without any problems.
So it's important if you installed it to let me know it worked.
Installation guide:
Step 1. download the recovery.img below
Step 2. install mobile uncle tools from the playstore.
Step 3. Make sure you've rooted your ISA A19Q. Not? Check my root tutorial!
Step 4. Connect your sd card to your pc and drag the recovery.img to the root of the sd (so not in any folder).
Step 5. Open mobile uncle tools and select Recovery Update.
Step 6. You should see the recovery you placed in your SD card. Select it and click on OK. Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
GOOD LUCK. If something strange happens (very unlikely just reinstall the rom. Check my root tutorial for the rom)
Perfectly working!
tijsh111 said:
Hello today I ported CWM for the ISA A19Q.
Please let me know if it works for you!
Feel free to hit the thanks button.
Currently I'm almost done with the custom rom MIUI.
I am planning to release it next week. I want to know if the recovery works fine for everyone
so I can release it next week and everybody can install it without any problems.
So it's important if you installed it to let me know it worked.
Installation guide:
Step 1. download the recovery.img below
Step 2. install mobile uncle tools from the playstore.
Step 3. Make sure you've rooted your ISA A19Q. Not? Check my root tutorial!
Step 4. Connect your sd card to your pc and drag the recovery.img to the root of the sd (so not in any folder).
Step 5. Open mobile uncle tools and select Recovery Update.
Step 6. You should see the recovery you placed in your SD card. Select it and click on OK. Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
GOOD LUCK. If something strange happens (very unlikely just reinstall the rom. Check my root tutorial for the rom)
Click to expand...
Click to collapse
Perfectly working thanks a lot for your job!!!!