Hello !
I used this USSD command #30# which deactivates the caller id function and it worked.
The command to reactivate caller id is *30# but this one is rejected (false command or not accepted by provider ..?).
The command to check the status of the caller id function is *#30#. It works and says "service deactivated".
So I m stuck with no called ir for over a year now !
What I don't understand is that USSD are network commands, so how could be it tied to my windows mobile 6.1 LG KS20 phone ? Because finally CALLER ID works in another device with same sim card !
This confuses me !
Anyone has a solution (registry, what ever except hard reset) please ?
And for the nerd part, an explanation ?
nota: my provider is french SFR (Vodafone).
Any help please ?
mm this aint gonna get an answer immediately, i will have to have a dig round and get back to you..
Thank you.
Any info about it ?
When you say no ID do you mean it becomes Private Caller?
Yes, phone number of caller never appears anymore...
Try *30#
the-equinoxe said:
Try *30#
Click to expand...
Click to collapse
Already tried that (my 1 st post), the command is rejected.
Thanks for ur answer anyway and hail Jean Michel Jarre !
Freeeeman said:
Already tried that (my 1 st post), the command is rejected.
Thanks for ur answer anyway and hail Jean Michel Jarre !
Click to expand...
Click to collapse
As far i remember , the commands to enable / disable caller id are :
*31# active , #31# hidden , *#31# show status
User22 said:
As far i remember , the commands to enable / disable caller id are :
*31# active , #31# hidden , *#31# show status
Click to expand...
Click to collapse
Those are only for outgoing.
The OP is having trouble with the incoming.
@OP Sorry didn't notice you already tried that.
So if it's bound to a specific device I a tempted to say:
Have you checked your registry settings?
I'll try to find out if I can duplicate this.
Only thing I could duplicate is: #30# will disable and *30# does enable..
Regards,
EqX
Related
there's a service in my service provider (etisalat) that when u call some1, after finishing the call, u receive a little info _i don't know wt its called_ that tells u the cost of ur call and ur remaining balance
that service works in all phones even old nokias and samsungs, but doesn't work in windows mobile 5 or 6. I think is somethng in the stk service cause when i open the Etisalat icon in the programs list and try to know my balance, it shows me some gibberish words
is there a solution for that ?
BTW, in my friend's magician with WM2003, this little info message appears after every call on top of the screen
nagoo1 said:
there's a service in my service provider (etisalat) that when u call some1, after finishing the call, u receive a little info _i don't know wt its called_ that tells u the cost of ur call and ur remaining balance
that service works in all phones even old nokias and samsungs, but doesn't work in windows mobile 5 or 6. I think is somethng in the stk service cause when i open the Etisalat icon in the programs list and try to know my balance, it shows me some gibberish words
is there a solution for that ?
BTW, in my friend's magician with WM2003, this little info message appears after every call on top of the screen
Click to expand...
Click to collapse
Hi, with my provider i have the same type of info after each call i made,
and it work under wm5&6 showing a baloon on top, maybe it's only a language problem with charset ? wm2k3 is the same language as yours ?
Is your STK service running?
its not a language thing .. i use a WWE rom
and yes stk is running
It's releted to USSD service.
You can check your registry. Use a registry editor, like regedit, there's a function to find keys, value... Write USSD and check for these keys.
Excuse me, but I don't have a UNI anymore. I had one until one year ago, then I can't be much precise. Anyway, I remember that I've fixed a problem releted to this in my roms for Toshiba G900. In that case I had a registry key, like "suppressUSSD" setted to "1". Then, any time it suppressed USSD service. And on G900 was a big problem, becouse many times a soft-reset was needed.
I hope this can help, bye
thank u davide
i'll give that a try
nagoo1 said:
thank u davide
i'll give that a try
Click to expand...
Click to collapse
did it work? whould like mine to show that too
nope .. there's no such thin as suppressUSSD
i tried to change other things in ussd in registry but nothing changed
however, if i find anyhing i'll post it
on my uni registry values appears as follows:
Code:
[HKEY_LOCAL_MACHINE\Services\USSD]
"SupportSpecialUSSD"=dword:00000001
"Context"=dword:00000001
"Description"="USSD Service"
"DisplayName"="USSD"
"Dll"="USSD_Dll.dll"
"Index"=dword:00000004
"Keep"=dword:00000001
"Order"=dword:00000008
"Prefix"="APP"
and add a new dword value to disable all ussd messages from carrier
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"SuppressUSSD"=dword:00000001
if can helps....
i checked my reg. and its the same as urs
ia added the suppressussd in control panel .. but nothing happened .. i changed its value between 0 and 1 but nothing
is it me or what
i have an exam 2morrow (final 1) ad then um gonna get this MF thing workin
on my pda all changes to reg was followed by a softreset to work
good luck with ur exam
I have a big problem with my newly bought HTC Trophy. The caller ID does not seem to work correctly. All my contacts have the country code prefix for all the numbers (+47 or 0047 here in Norway). When I receive a call the caller name is not shown, only the number. But if I remove the country code, the caller name is shown. But then all the text messages I receive, shows only the senders number and not the name. How do i fix this?? This is a big problem for me.
I've tried switching the Internation assist on, no good. Please help
Fre_ZZe said:
I have a big problem with my newly bought HTC Trophy. The caller ID does not seem to work correctly. All my contacts have the country code prefix for all the numbers (+47 or 0047 here in Norway). When I receive a call the caller name is not shown, only the number. But if I remove the country code, the caller name is shown. But then all the text messages I receive, shows only the senders number and not the name. How do i fix this?? This is a big problem for me.
I've tried switching the Internation assist on, no good. Please help
Click to expand...
Click to collapse
I was going to say post in Microsoft answers but i see you already have lol
Hehe Yes I have, and apparently there's a lot of issues with this from other countries as well. This is such a fundamental thing to be working so I'm suprised Microsoft doesnt have an offical saying in this..
For now, I cannot use my phone, I REALLY have to be able to know who's calling before I decide if I gonna answer or not..
Stupid MS, apart from this I'm actually very happy with the my first WP7 device.
http://forum.xda-developers.com/showthread.php?t=907971
use the callerid fix
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
where the dword is the number of digits in your phone number, less the country code
eg, singapore uses 8 digits, +6512345678, so it's
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:8
Click to expand...
Click to collapse
for me
i tried it yesterday, it does work
Thanx, that was what I'm looking for
How do I unlock my phone to be able to edit the registry entries?
http://forum.xda-developers.com/showthread.php?t=938106
install the developer tools
install zune
install certificate
set phone to airplane mode
connect to zune
run chevronwp7
unlock
then install registry editor from touchxperience website
Hello, i cant seem to fix my mozart's issue.. I'm from Malaysia btw. normal numbers are 010 1234567, so logically should be 7 right? i've tried 7, 8, 9, 10, 11...these values cant seem to work..can you help me?
This is still a problem on Mango!!! Any "easy" way to fix this guy's??
Hello guys,
I bought HTC Mozart from 5 days ago and every thing is will except the caller id it same problem
I'm thinking to unlock the device for change the registry value.
but another problem the ChevronWP7 is not working with me.
If any one have an easy solution let us know.
Thank you all
ultra_nyamuk said:
Hello, i cant seem to fix my mozart's issue.. I'm from Malaysia btw. normal numbers are 010 1234567, so logically should be 7 right? i've tried 7, 8, 9, 10, 11...these values cant seem to work..can you help me?
Click to expand...
Click to collapse
Same HTC 7 Mozart user here in Malaysia, doesn't have the called ID issue...
The count should be like this:
+60
123456789
so, 9 should work for you, remember to restart your phone after the reg applied.
This has been a problem (do not now if it is) since day 1 where I have 2 sims in the phone and some calls come as a Unknown although the number of the person is already in the contact list.
Morever problem becomes more worse where if the call is missed and the you try to call back, it does dials as there no number.
I have a friend who is also using Moto G and he is not facing the issue.
Would you please help in this ? Is is some setting that needs to be done ?
Thanks & Regards,
Harish
NMAndroid said:
This has been a problem (do not now if it is) since day 1 where I have 2 sims in the phone and some calls come as a Unknown although the number of the person is already in the contact list.
Morever problem becomes more worse where if the call is missed and the you try to call back, it does dials as there no number.
I have a friend who is also using Moto G and he is not facing the issue.
Would you please help in this ? Is is some setting that needs to be done ?
Thanks & Regards,
Harish
Click to expand...
Click to collapse
Hi Harish,
Check the numbers stored in your contacts... Sometimes while saving a new contact number the "+" in the "+91 xxxxx xxxxx" does not get saved... Instead it is saved as "91 xxxxx xxxxx"... it might be the cause of your problem...
tharas said:
Hi Harish,
Check the numbers stored in your contacts... Sometimes while saving a new contact number the "+" in the "+91 xxxxx xxxxx" does not get saved... Instead it is saved as "91 xxxxx xxxxx"... it might be the cause of your problem...
Click to expand...
Click to collapse
Hi,
Have checked and that does not seems to be a problem.
Thanks
I want the moderator to ban me.
Hi
No way of whatsapp verfication does not work for me ( for verfication message it show me " can't send verfication message " and for verfication call show me " you have used verfication call too many time )
It's support does not answer me too .
Please help to solve my problem
Ahmad.S9675 said:
Hi
No way of whatsapp verfication does not work for me ( for verfication message it show me " can't send verfication message " and for verfication call show me " you have used verfication call too many time )
It's support does not answer me too .
Please help to solve my problem
Click to expand...
Click to collapse
That's weird! I had a similar issue two months ago, the number I entered wouldn't be recognised. I sent an email to the Whatsapp support attaching a photo of the sim invoice (you only see the number and the operator - nothing else, just enough to prove that I'm not making up the number), after 1 day they answered and sure enough, they did something since I was able to verify the number with their automated call.
So, my advice is to give them as much info as you can and be patient :good:
charliebigpot said:
That's weird! I had a similar issue two months ago, the number I entered wouldn't be recognised. I sent an email to the Whatsapp support attaching a photo of the sim invoice (you only see the number and the operator - nothing else, just enough to prove that I'm not making up the number), after 1 day they answered and sure enough, they did something since I was able to verify the number with their automated call.
So, my advice is to give them as much info as you can and be patient :good:
Click to expand...
Click to collapse
But i have sent more than 3 email And get no answer !
Now solved
I had the same problem before, today ai could verify
Uninstall it and install it again
I am wondering if anyone had this issue after rooting the phone, but when I receive calls, their caller ID comes wrong: The number is always is missing the country code:
for example, instead of receiving +1 248 123 4567, i get +248 123 4567. So not only saved numbers are not recognized because they do not match the caller id, but if i let the call stop and try to call back that missed call, I get the operator's automated message saying that the dialed number is wrong.
Any idea about how to fix this?
tuntex said:
I am wondering if anyone had this issue after rooting the phone, but when I receive calls, their caller ID comes wrong: The number is always is missing the country code:
for example, instead of receiving +1 248 123 4567, i get +248 123 4567. So not only saved numbers are not recognized because they do not match the caller id, but if i let the call stop and try to call back that missed call, I get the operator's automated message saying that the dialed number is wrong.
Any idea about how to fix this?
Click to expand...
Click to collapse
Go to phone/settings/calls and disable/enable assisted calling
Plus set your current country to match the country code
luis052593 said:
Go to phone/settings/calls and disable/enable assisted calling
Plus set your current country to match the country code
Click to expand...
Click to collapse
I tried both enabled and disabled assisted dialing. Problem still persisting. Country code is matching (USA). Any hints?
tuntex said:
I tried both enabled and disabled assisted dialing. Problem still persisting. Country code is matching (USA). Any hints?
Click to expand...
Click to collapse
My phone was doing the same. I downloaded prefixer from playstore and its fixed now
NvWatts said:
My phone was doing the same. I downloaded prefixer from playstore and its fixed now
Click to expand...
Click to collapse
I installed prefixer a couple of days ago... still not fixed. Can you walk me through how you made it work please?
My phone keeps getting worse... home screen changing to pink randomly, dialtone not working anymore. Rooting my phone was the biggest mistake ever. I wish i could reverse all this process.