The touch screen on my phone just stopped working last night after I had a 1hr conversation, the screen now has a black circle in the middle which is clearly noticeable when the phone is switched off. Is it possible and easy to be replaced and where is the best place to get the parts from please? I got the phone from T-mobile.
Related
Greetings.
I woke up this morning and my HTC touch pro wasn't at the usual place(my desk) so I call the phone to see where it is and it appears it was at a part of my bed where there's a piece of iron.
The screen is scratched pretty bad and the screen wasnt touch sensitive anymore when I was trying to move around in it.
Then I decided to restart the phone to see if that would help but the phone won't even boot up anymore.
Anyone know what I could do to get it to work again?
Also, where I could buy a new screen/how much one costs.
Thanks
Bump.. this is important :S
Thats weird that it won't even turn on. If it won't turn on it seems like something more serious that just the touch screen. If I were you I would try to get warranty replacement since its just scratches. If the touch screen were cracked then you'd be out of luck with warranty replacement.
I tried to buy a screen too but I gave up after I found out that the total amount is around 100 Euros to replace the screen and buttons...
And yes, it's weird that you could call your phone, but didn't manage to start it after reset. you definitely have to take it to service.
Try taking out the battery for like 10 minutes and putting it back in. Then Reboot...
I've had an unlocked Raphael that has worked flawlessly for the past 10 months.
So a while back I was texting and the screen gave out on me, so I used the keyboard for a while. I did a soft reset and screen was still not responding...
Then I did a hard reset and have been stuck on the screen alignment ever since.
The only part that does respond is where it says htc on the screen cover.
If I push on that area, the + moves to all the corners, and eventually comes back to the center to redo the alignment.
Any thoughts on what I could do?
Info:
Raphael unlocked and being used on T-Mobile.
There is no magnetic case, or any case on the phone.
I did a hard SPL last night, so it shows I have the 1.90 OliNex.
I need an htc touch pro t7272.dat file from a good aligned htc pro.
If you find htc touch pro t72727.txt, that's fine, I'll just change the extension.
I managed to get past the screen through remote alignment, but the screen is not functioning because well, I haven't aligned it.
JXM said:
I've had an unlocked Raphael that has worked flawlessly for the past 10 months.
So a while back I was texting and the screen gave out on me, so I used the keyboard for a while. I did a soft reset and screen was still not responding...
Then I did a hard reset and have been stuck on the screen alignment ever since.
The only part that does respond is where it says htc on the screen cover.
If I push on that area, the + moves to all the corners, and eventually comes back to the center to redo the alignment.
Any thoughts on what I could do?
Info:
Raphael unlocked and being used on T-Mobile.
There is no magnetic case, or any case on the phone.
I did a hard SPL last night, so it shows I have the 1.90 OliNex.
Click to expand...
Click to collapse
I have a similar problem with my Touch Pro for Verizon. I found out its because the screen/digitizer are shifting to the right of the phone and causing the screen to get a oily appearance. I have to use my fingernail to push the screen slightly back towards the center and the digitizer works properly again. Perhaps you are having a similar problem?
I unfortunately smashed my screen and ended up having it replaced by buying an oem screen from eBay. But whenever pressure is put on certain parts of the back of the phone the screen just cuts off. It's got to the point where the phones just sitting there or its in my pocket and the screen will die (the phone is still on as I can see the notification light blinking but this isn't always the case) and I have to push the back of the phone and reset it and after a few attempts this will usually work. Any idea what it could be? Faulty screen? Dodgy installation? (I've checked numerous YouTube videos and as far as I can tell nothing is missing).
I'm tempted to just send it to Google and see what they say as I'm getting pretty fed up with it constantly dying but thought I'd try here first
Thanks
Hi
I am trying to fix my Nexus 5. Couple months ago I dropped a mug on the phone. The result: cracked screen. I ordered a new screen with the whole front housing so only thing I had to do was remove cracked screen with frame and replace it with new one. When I did it I turn on the phone but I saw only a short blink of the screen. After lots of attempts of I came to conclusion that I probably damaged the new screen or it was already damaged. So the screen is black. When I plug the phone to PC everything works perfectly. I can browse the memory etc.
I would like to ask you whether my conclusion is correct and the only issue is the screen which has been damaged by me or the seller.
One more thing is that when I charge the phone or it is attached to the PC beside the black screen I can not also see any light from notification led.
Best
micro
If the old screen can still display an image, move the parts back to the old screen to check for issues.
HI. Thx for reply. I don't remember whether cracked screen was functional in terms of displaying image. I will try to attache the old screen and will let you know.
Best
Hi
I have Mate 7 MT7-L10.
I smashed the screen and bought replacement screen from ebay.
After replacement phone started OK for 2min. After that no display.
I took of lcd connection and reconnect but no luck.
Then tried battery connection and reconnect after few seconds.
It started for a while then turned off again.
So need to do the battery and LCD connection again to get the display.
If I don't flip the phone it stays on display.
As soon as I flip over to put all screw and put the back cover display goes off. Then I need to reconnect everything.
I got display more more than 30 min while just left stable.
Any idea how to fix this.
Thanks
I have the same problem, but in my case the screen displays a set of white footprints, the date and time. It won't let me get past that after. I know it's not the digitizer since I can boot into recovery twrp and make selections, but booting the system brings me back to the display of the footprint in the center screen. No idea why it's like that...only after I replaced my broken lcd it gives me this problem.