Hi, I've been to the wiki page and downloaded the cid unlocker, T-Mobile rom, Lokiwiz and the Hornet 6.1 rom. I actually wanted a touch flo rom but every link seems to be dead. My ipl and spl are both 2.16.0001 so I have a G4. I have recently changed providers (I'm in New Zealand) so I take it my phone must be unlocked?
My problem is I'm using Windows 7 and so the windows mobile centre but when I use the "custom-ruu-wizard-1050412" program. I get part way through the installation and windows tells me the program has stopped working and recommends I close the program or check online and when I check online it just shuts down...help!!!
What am I doing wrong?
Cheers Matt
Related
Hi mates. i was using tnt series wm6 rom. and i just tried to upgrade to faria's rom using shell tool. and after non successful upgrading now. when i start my wizard it stuck on boot screen. with this info.
ipl : 3.08
spl: 3.08
Gsm : 2.19.11
OS : 2.18.0.0
i tried a alot installing original t-mobile shipped rom but it says the update utility is not for your device.
i tried a lot installing other roms using shell tool. but all return this screen. so please let me know. how i will completly flash this thing..
Kind Regards
Tell us smth more
Are you using Windows Vista on your PC.
If you do, do some search around to find how to update from Vista in Bootloader Mode, as Vista can not talk to the phone on that state
Aldo
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
ruk_design said:
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
Click to expand...
Click to collapse
My friend have you already done the reviving techniques included in this tut?:
http://forum.xda-developers.com/showthread.php?t=298613
G3 or G4 device?
Hi,
I have a Tilt, the ROM version is: 1.57.502.2, Radio version: 1.27.12.11. I am trying to downgrade the phone to WM5 or to one of the cooked roms published on this site. I have spent hours reading the WIKI section and many posts. I have tried to install the HARD-SPL however in the begining I had the white screen problem. After using the JUMPSPL, I think that I have managed to install the Hard-SPL (The version that the bootloader shows is: SPL-1.0.Olipof.
I have also unlocked the phone and the CID using tools available on this website. I have no way to check if the unlock works since I do not have another SIM with me right now.
The problem that I am having is that every time I try to install a ROM, I start the upgrade wizard, and get to the point where the phone shows a promt that asks me if I want to approve the execution of a file. I confirm it and then the phone reboots, shows the AT&T logo right away and reloads everything. I do not see the bootloader and after around 60 seconds I get the 260 error on my computer telling me that there is an update error and that the update utility could not access my PDA phone.
I have also tried to get into the bootloader manually, then connect the USB while ActiveSync is open and load an ATT rom (It's an older one with WM5 provided by Cingular) however I get the same results...
Can anyone give me some guidance? Any advice will be greatly appreciated!!!
Thanks,
Joe
P.S. The computer's OS is windows XP, I have turned of the Anti-Virus Scanner (AVG)
dude, there is no wm5 for the tilt........i think you are trying to load an 8525 rom on the the tilt and that is not going to work
What about a cooked rom?
Thanks for your reply. Is there any way to install a cooked ROM instead of cingular/ATT provided Roms with WM5?
logmaster said:
Thanks for your reply. Is there any way to install a cooked ROM instead of cingular/ATT provided Roms with WM5?
Click to expand...
Click to collapse
Like XtreMe_G said, there is no WM5-ROM available for the Kaiser. You can only use WM6/WM6.1 ROMs.
Why would you want to use a WM5 one?
If you want to flash one of the WM 6/6.1-Rom's, read the "Introduction to ROM flashing" (link below) .
This thread needs to die...
There is no WM5 Rom for HTC Kaiser Model.
Nobody has cooked one.
HTC didn't OEM one.
IT DOESN'T EXIST.
RTFF, you'll find everything you need to know about flashing cooked Roms but you will only find WM6 & WM6.1 Roms.
Hi I love this site. I need some help i did plently reading on roms n flashes and tried plenty out. My Question is that i have an htc 8125 phone which is unlocked and has windows mobile 5 on it and is is ilp 1.05 spl 3.08. I wanna put windows mobile 6 with the touch flow and cube but so far I ain't able.
I tried out TNT_5.0_Wizard_TouchFLO and NBK 9 on the Tnt i did it with active sync. I noticed on using TNT at starting my phone on i Get a TNT windows mobile 6 screen then when the phone boots up it customizes cingular and im back with windows mobile 5.
anyway to put windows mobile 6 and touch flo.
thanks for the help
When downgrading your phone so that you can unlock it - you need
Both IPL and SPL @ 1.XX
Yours are not the same - so you need to redo the process to get these two numbers to match. Flash the button rom.
Then, you need to flash a stable oem rom - like the Tmobile 2.26
In order to flash WM6 roms - you need ipl and spl of 2.XX or greater.
You've mentioned that you did some reading - do a little more. Read the unlocking and flashing a wizard posts, follow each step - do not skip any. Take your time, the how to's are very detailed - but they are bang on.
Good luck
htc 8125 problem!
Hi that such I have written for several sides asking the same thing, which happens it is that I have a htc cingular 8125 and need the help someone who can devote a solution to the problem that on having connected my htc to the pc, the activesync it synchronizes well and habia could before formatting the memory could spend(pass) of quite files etc.. But now after erasing I want to install any rom and it turns out that the rom does not recognize the htc, me mistake and the this battery 100 % loaded, the cable in good conditions, I changed the framework into the last one to the pc etc.. And nonetheless I could not have installed the rom.. not that to do.
Thanks...sorry for my bad english.
Is your phone a G3? Install SuperCID.
Is your phone a G4? Run HardSPL.
Once that is done, you should be able to load the Wizard Love ROM.
Then, you should be able to load any WM6 ROM from these boards.
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
nisgar2k said:
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
Click to expand...
Click to collapse
I would recommend you use something like: http://forum.xda-developers.com/showthread.php?t=353547 It makes it a one stop upgrade... That uses "JumpSPL" rather than HardSPL which is the short term option.
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
nisgar2k said:
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
Click to expand...
Click to collapse
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
HardSpl Problem
l3v5y said:
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
Click to expand...
Click to collapse
i ran upgrade_hardspl_g4 on my prophet, my spl is 2.15 still... what should i do l3v5y? tried flashing it 5 times still no luck. Please help, having a hard time upgrading roms...
ipl: 2.20
spl: 2.15
im currently downloading prophet tools 2.8. i currently flashed my 818 with PV_temp rom. i'll try to install the prophet tools and hardspl my phone with it.. hope it works...will update in a few after the installation is done... downloading so slow... =(
*-----------------------------*
i did it!! thanks!!!
I made it, use SoftSPL.
Hi,
I checked this forum for mails how to update my MDA vario. I did some things like unlock CID. It was already SIM unlocked.
I was able to download a ROM upgrade (doesn't matter which one). After going thru the screens and let my MDA vario restarted. But after restarting it has still the Microsoft Windows Mobile version 5.0.
I have no idea what I have to do more.
IPL: 1.01
SPL: 2.21
This can be closed. I found a tool and can now update the rom