Hi I love this site. I need some help i did plently reading on roms n flashes and tried plenty out. My Question is that i have an htc 8125 phone which is unlocked and has windows mobile 5 on it and is is ilp 1.05 spl 3.08. I wanna put windows mobile 6 with the touch flow and cube but so far I ain't able.
I tried out TNT_5.0_Wizard_TouchFLO and NBK 9 on the Tnt i did it with active sync. I noticed on using TNT at starting my phone on i Get a TNT windows mobile 6 screen then when the phone boots up it customizes cingular and im back with windows mobile 5.
anyway to put windows mobile 6 and touch flo.
thanks for the help
When downgrading your phone so that you can unlock it - you need
Both IPL and SPL @ 1.XX
Yours are not the same - so you need to redo the process to get these two numbers to match. Flash the button rom.
Then, you need to flash a stable oem rom - like the Tmobile 2.26
In order to flash WM6 roms - you need ipl and spl of 2.XX or greater.
You've mentioned that you did some reading - do a little more. Read the unlocking and flashing a wizard posts, follow each step - do not skip any. Take your time, the how to's are very detailed - but they are bang on.
Good luck
htc 8125 problem!
Hi that such I have written for several sides asking the same thing, which happens it is that I have a htc cingular 8125 and need the help someone who can devote a solution to the problem that on having connected my htc to the pc, the activesync it synchronizes well and habia could before formatting the memory could spend(pass) of quite files etc.. But now after erasing I want to install any rom and it turns out that the rom does not recognize the htc, me mistake and the this battery 100 % loaded, the cable in good conditions, I changed the framework into the last one to the pc etc.. And nonetheless I could not have installed the rom.. not that to do.
Thanks...sorry for my bad english.
Is your phone a G3? Install SuperCID.
Is your phone a G4? Run HardSPL.
Once that is done, you should be able to load the Wizard Love ROM.
Then, you should be able to load any WM6 ROM from these boards.
Related
Hi,
Im have a G4 mda vario!
ipl 2.21.0001
spl 2.21.0001
original software t-mobile.
Im trying to figure out the best way to upgrade to wm6. Some topics say to unlock CID but with a G4 you must pay for it. Other topic say use hard spl or soft spl is this also for CID unlocking?? I dont know annymore so can someone help me?? The steps I need to make to install wm6 on my device.
And for the best wm6 rom on htc wizard aka mda vario.
Thnx!
Kevin
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
if you want to save yourself an absolute tonne of mucking about and trying to figure everything out, i recommend you splash the cash and pay the £20 on http://www.imei-check.co.uk/
i have a g4 and used these guys, worked with absolute no issues, and im on the xmr5 rom ( or whatever its called )
funy said:
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
Click to expand...
Click to collapse
the above recomendation are good , in fact that's what i have done to update my G4. I would only add to that rembember to save your current rom and extended rom before update. so you may downgrade if you have any problem with wm6.
Hi,
I have a Tilt, the ROM version is: 1.57.502.2, Radio version: 1.27.12.11. I am trying to downgrade the phone to WM5 or to one of the cooked roms published on this site. I have spent hours reading the WIKI section and many posts. I have tried to install the HARD-SPL however in the begining I had the white screen problem. After using the JUMPSPL, I think that I have managed to install the Hard-SPL (The version that the bootloader shows is: SPL-1.0.Olipof.
I have also unlocked the phone and the CID using tools available on this website. I have no way to check if the unlock works since I do not have another SIM with me right now.
The problem that I am having is that every time I try to install a ROM, I start the upgrade wizard, and get to the point where the phone shows a promt that asks me if I want to approve the execution of a file. I confirm it and then the phone reboots, shows the AT&T logo right away and reloads everything. I do not see the bootloader and after around 60 seconds I get the 260 error on my computer telling me that there is an update error and that the update utility could not access my PDA phone.
I have also tried to get into the bootloader manually, then connect the USB while ActiveSync is open and load an ATT rom (It's an older one with WM5 provided by Cingular) however I get the same results...
Can anyone give me some guidance? Any advice will be greatly appreciated!!!
Thanks,
Joe
P.S. The computer's OS is windows XP, I have turned of the Anti-Virus Scanner (AVG)
dude, there is no wm5 for the tilt........i think you are trying to load an 8525 rom on the the tilt and that is not going to work
What about a cooked rom?
Thanks for your reply. Is there any way to install a cooked ROM instead of cingular/ATT provided Roms with WM5?
logmaster said:
Thanks for your reply. Is there any way to install a cooked ROM instead of cingular/ATT provided Roms with WM5?
Click to expand...
Click to collapse
Like XtreMe_G said, there is no WM5-ROM available for the Kaiser. You can only use WM6/WM6.1 ROMs.
Why would you want to use a WM5 one?
If you want to flash one of the WM 6/6.1-Rom's, read the "Introduction to ROM flashing" (link below) .
This thread needs to die...
There is no WM5 Rom for HTC Kaiser Model.
Nobody has cooked one.
HTC didn't OEM one.
IT DOESN'T EXIST.
RTFF, you'll find everything you need to know about flashing cooked Roms but you will only find WM6 & WM6.1 Roms.
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
nisgar2k said:
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
Click to expand...
Click to collapse
I would recommend you use something like: http://forum.xda-developers.com/showthread.php?t=353547 It makes it a one stop upgrade... That uses "JumpSPL" rather than HardSPL which is the short term option.
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
nisgar2k said:
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
Click to expand...
Click to collapse
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
HardSpl Problem
l3v5y said:
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
Click to expand...
Click to collapse
i ran upgrade_hardspl_g4 on my prophet, my spl is 2.15 still... what should i do l3v5y? tried flashing it 5 times still no luck. Please help, having a hard time upgrading roms...
ipl: 2.20
spl: 2.15
im currently downloading prophet tools 2.8. i currently flashed my 818 with PV_temp rom. i'll try to install the prophet tools and hardspl my phone with it.. hope it works...will update in a few after the installation is done... downloading so slow... =(
*-----------------------------*
i did it!! thanks!!!
I made it, use SoftSPL.
Hi,
i have Treo 750 want to unlock!!
IPL:0.20
SPL: 0.24.0000'
i try with Cheeta unlocker and MAGIC Unlocker, both not work.
it this because of the new SPL0.24??
can anyone give me instruction how to please!!
thanks
i had same problems with my treo. first like oli says in his first post about hard spl make sure you have net compact framework 2.0 on your computer. what worked for me was in your c drive there is a folder called tempche. delete that file then run unlocker again. i only did first step on my treo just so it would be hard spl'd. never did step 2 and so on cause i didnt feel a need too.
thanks man, just delate the tempche folder then everyhting run smoothly.
cheers
Good for you!
Hi:
Where do you find the SPL and IPL information?
And can you tell me what SPL actually is?
Thanks!
spl
im not sure about what spl means but i do know that you need to have it done in order to install a cooked rom. it basically unlocks your phone so you can flash different roms that the chefs cook. there really isnt to many people cooking roms for the treo. theres only about 3 or 4. i think everybody got different phones so thats why your not getting responded too very quickly. i too have a tilt and a treo and i like to bounce back and forth between phones. i have the wm 6.1 lite rom on my treo. if your looking at just upgrading from wm 5 to wm 6 you dont need to do a hard spl. stock roms allow you to flash without unlocking your phone. im not a computer genious here but i will try and assist you however i can. ive been in your shoes before trying to figure all this stuff out.
i forgot to answer your question about where to find the spl. it shows up in your bootloader screen. you can see it by pressing down the lower left side button and pushing soft reset which is located on the other side where you put your mini sd in. there is a small whole that you use your stylus to push in. you can just soft reset again to get out of the bootloader screen.
helpeee
i used cheeter unlocker. I
did step one and two
successfully. But at the end i get
the debug error which some
people got. So i copied htc herm
unlock v3 to the phone. I ran it
from phone and selected sim
unlock and it was succesfull. But
when i turn on radio, i get "you
have tried 5 times, wait for time
out ****".
Please anyone, what am i doing
wrong, or what should i do to
unlock my machine?? It has wm6
from at&t.
_________________
Okay I want windows mobile 6. Whatever reliable working version I can get. I need to apparently unlock the CID and Sim unlock the phone? Carrier is T-mobile. I'm not new to registries, etc. I created my own Iphone theme with all the great perks (just for fun) even so I'm not new to hacking a phones appearance, but everything else like flashing, etc. I'm new to. I'm good at figuring things out though.
But I reviewed multiple threads and just don't get it, which one do I use?
So if anyone can help me out, please do. I have all the roms for the new 6.5 and all that but the only thing is NONE are english or say what version itll change to, etc. Any help is appreciated.
===========================
I have:
G3
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
Windows Mobile Version 5.0
Windows OS 5.1.70 (Build 14410.1.1.3)
Processor: OMAP850-195MHz
==============================
UPDATE:
I UNLOCKED CID AND SIM UNLOCKED PHONE
NOW I NEED A GOOD VERSION OF WINDOWS MOBILE I GUESS
If you have followed this guide & you have managed to flash T-Mobile 2.26 rom (step G3.7) you can flash every rom that you can found here with safety. As you will see it is recommended to fully charge your phone first & use Windows XP for flashing & not Vista. Good luck.-
I tried the 2.26 rom to flash it from 1.08... All it does is switches to the green red whtie or blue screen and then wont flash or install the rom...
Scath said:
I tried the 2.26 rom to flash it from 1.08... All it does is switches to the green red whtie or blue screen and then wont flash or install the rom...
Click to expand...
Click to collapse
Intresting...
What guide have you followed to CID & SIM unlock your phone?
Did you flash Button Rom?
After flashing Βutton Rom if I remember right you must have IPL/SPL 1.05
Then you can flash 2.26
This is what I have done.-
I'm running vista if that's the problem.. But I tried flash button rom and that just gives me an end process error. I dont have 1.06 but 1.08
Let me try the link you sent me it is different.
ERROR 204. Constantly
Scath said:
I'm running vista if that's the problem.. But I tried flash button rom and that just gives me an end process error. I dont have 1.06 but 1.08
Let me try the link you sent me it is different
Click to expand...
Click to collapse
You can take a look here too.
Read the procedure
I think that maybe you have not yet CID/SIM unlocked your phone.
Be carefull. If you are not CID/SIM unlocked & you are trying to flash a rom different from the one that came with the phone, you can brick your device.
Read very carefully the guides & follow them step by step.-
Scath said:
ERROR 204. Constantly
Click to expand...
Click to collapse
Sorry can't help further. Maybe it's something that has to do with Vista
Try some of these suggestions for Vista
http://forum.xda-developers.com/showthread.php?t=291723
It's hit and miss with Vista. I have Vista 64 and cannot get it to work so I have 1 computer in the house that has XP just for flashing my 8125.