Unique NRG ROM problem - Touch Pro2 CDMA

I'm not sure where to post a serious problem I'm having with this ROM (mods feel free to move to where this might get the most attention). Anyhow, here goes.
I have a Verizon TP2
I'm using (or rather TRYING to use) Energy.RHOD500.23541.Sense2.5_with_MaxManila.Feb.2 6.7z
Here's my symptom:
When Data and Activesync are enabled on the phone, I can no longer dial out. I get "The Network is Busy, Please Try Again Later".
If I do not enable activesync, I can use the data and place calls fine. Once I've enabled activesync, I cannot use the phone for outbound calls until I reflash the phone. No amount of turning off the data connection and rebooting, hard resetting, etc will allow me to make calls. I should say, that for a SHORT (like MAYBE 10 minutes) after I enable activesync, I can dial out and sync the phone.
I can receive calls fine. It's like the dialer cannot properly interrupt the data connection to make the call.
Maybe unrelated, but going to wireless controls > 3G >and trying to select a band results in the error "You have an ongoing voice call and the band cannot be changed now. Please try again later". I should note that in the "Network type" there is NOTHING selected (not even auto). I can force WCDMA and then back to auto by going into airplane mode. It does not resolve my dial-out problem.
So far, to try and resolve this, I've:
Reflashed and reprovisioned.
Hard reset and reprovisioned.
Reinstalled the base ROM, reprovisioned, reinstalled Energy.RHOD500.23541.Sense2.5_with_MaxManila.Feb.2 6.7z and reprovisioned
Reflashed, reprovisioned and tried the MRX_Verizon cab
Asked the phone what it's problem is
Cursed at the phone.
As you can see, I'm nearing wit's end.
If there's any input anyone can give me, I'd really appreciate it. I'd love to be able to call people AND use this ROM. I feel like I should create a new thread for this, but I don't know where would be best without it being ignored.
I've duplicated this post on ppcgeeks int he NRG thread to see if anyone can help point me in the right direction.

No point in creating new threads for issues with a particular ROM. As in the ROM thread, where other ROM users might be able to guide you.

Related

At&t Fuze Losing Data Connection

Well I just got my At&t Fuze like 3-4 days ago. For some reason it randomly loses connection to the network, so I can make call or use the internet. I'll have to go back to setting- communication to turn off my phone turn it back on then turn on the data connection. I'm really tiring of it happening over and over again. Does anyone else have this problem? And are there any ways to fix it? Thanks
No one has any idea??
Are you still running the stock ROM? If so, GET RID OF IT!!!!
In all seriousness: Have you installed any applications? Have you modified TouchFLO 3D? You can always try a hard reset and see if the problem persists.
It's possibly a problem with AT&T's network. I've noticed that my 3G speeds are incredibly slow lately and others on hofo have had this issue as well. I would advise you to wait it out.
forp me it says i get 3g,edge, or G and i will cant connect sometimes.
I also have this issue. Sometimes it happens after a soft reset or for no reason at all. It is easy to fix as i just turn data back on but I don't know why it is happening.
I actually tried a hard reset reset and it didn't work so then I brought it back to At&t and the guy there fixed it for me. He said it was because the data connection was off so then I thought maybe I accidentally turned it off, but the problem persist after.
Yes, I am still running under stock rom, I installed google map, beejive, and some other that I don't think will cause this problem. I am afraid to flash because I already have a lot of contact info set in and data and would have to re-do everything.
I was hoping maybe someone would have a solution for this. I don't think running on stock rom would cause this.....
Any help would be great. Thanks
I just flash it to NATF's rom and it's working really well right now. I hope the problem will not appear again. Again thanks for the rom NATF
I now get it often that there is a problem with the GPRS in your area. Also there are times that the phone is not even connected. It is getting to be a pain but will try calling AT&T and find out
Even after installing a new rom the problem still continue. I tried going into an At&t store and ask, but they have no clue. I don't have time to call 611 right now, but will update with what they say when I do. It starts to get really annoying....
Fuze_tactic said:
I actually tried a hard reset reset and it didn't work so then I brought it back to At&t and the guy there fixed it for me. He said it was because the data connection was off so then I thought maybe I accidentally turned it off, but the problem persist after.
Yes, I am still running under stock rom, I installed google map, beejive, and some other that I don't think will cause this problem. I am afraid to flash because I already have a lot of contact info set in and data and would have to re-do everything.
I was hoping maybe someone would have a solution for this. I don't think running on stock rom would cause this.....
Any help would be great. Thanks
Click to expand...
Click to collapse
It's probably a network issue.
Regarding flashing, I suggest you back up your contacts with outlook. Even if the problem has nothing to do with software, you're missing out quite a bit in terms of speed. Besides, you should back up your contacts regardless. Don't trust windows mobile too much
OK, sounds like I'm not the only one experiencing this problem. I think the only thing that's different for me is that when I lose the data connection, I also lose voice. The first time it happened, it said my SIM was unprovisioned. When I called customer service, they didn't know beyond checking for network outages in my area.
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
pcortes said:
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
Click to expand...
Click to collapse
No, I've checked that. It happened once when it was just charging, no where near my hands or anything that could have pressed it. When it happens I can't make calls or reestablish data connections until I either go in the connections manager or soft reset.
pcortes said:
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
Click to expand...
Click to collapse
Like tribalmunky said we were no where near the phone when it happens, but I follow your instruction and changed the long pressed key. I'll see if anything occurs. Thanks for the input tho.
Update:
I called At&t and from what tech support told is, their network is having problems, especially for users in Cali. They are in progress of fixing it, but no idea how long it is going to take. I guess the only thing we can do now is wait.
Fuze_tactic said:
Update:
I called At&t and from what tech support told is, their network is having problems, especially for users in Cali. They are in progress of fixing it, but no idea how long it is going to take. I guess the only thing we can do now is wait.
Click to expand...
Click to collapse
I've been having problems with this too (losing data and phone) and I'm in Seattle. Maybe if I call, AT&T will claim there are problems with the entire west coast.
I did the whole SPL and ROM flashing thing (ROMeOS) and the problem still persists. I chatted online with an AT&T guy and he said it was a known issue but no way to fix it yet.
If you're worried about your contacts, don't be. Use PPCPimBackup (I think I got it either here or at freewarepocketpc.net) and it can copy all of your contacts onto the storage card. It's free and I've used it prior to flashing a new ROM.
However, flashing ROMs do not work. The only fix is simply going to your communications settings, turning off Data, then turning it right back on. This will also be why some of your MMS pictures don't get sent out.
I still love this phone, just get annoyed with it at times. Even the available larger battery with cover only makes my phone last about two days opposed to one.
In NJ
sbreen said:
I've been having problems with this too (losing data and phone) and I'm in Seattle. Maybe if I call, AT&T will claim there are problems with the entire west coast.
Click to expand...
Click to collapse
I am in NJ and have the same problem. It started about the time I loaded some screen lock software that requires a finger swipe to unlock the touch screen (navigation buttons always active) upon coming out of sleep mode. I just decided to live with it, I like the software. I merely click the data connection in settings, connections, data connection (it may indicate off or on, doesn't matter, it is actually off) and then click it on and everything works again. Mostly happens after charging overnight.
I have stock fuze and it keeps happening to me too. But whenever I reset my phone, I can connect to the internet. I don't think it's network related in my case. not sure though.

Error when trying to connect to internet "The answering modem has disconnected"

Error when trying to connect to internet "The answering modem has disconnected"
Whenever I try to do anything that involves connecting to the internet I get the error message "The answering modem has disconnected. To check your connection settings and change them if needed, tap settings," and underneath that pops up the message, "There is a problem connecting to the GPRS service in your registered home network." It seems to have happened randomly, as I haven't done anything to my phone since flashing Da_G's clean rom a week and a half ago. I thought it might have been maybe just the network in my area, but everyone else gets 3g internet just fine. Any ideas would be appreciated, thanks.
disable the hidden proxy. Programs - tools - proxy
Didn't work. I even tried a hard reset and still the same thing.
Did you have your Internet connection working after flashing Da_G's ROM? If you did, and then suddenly without any warning (and without you changing settings) it stopped working, and you're sure that others that have the same provider as you have their Internet connection working, then it's possible that your provider screwed something up. In that case, you should give them a call.
Actually now that you mention it, I'm on an employee plan through Best Buy Mobile, and they're redoing the data plans and making them cheaper, so they may have taken the original one off for the time being and will hopefully put the new one back on soon? I'm hoping so anyway. Thanks guys.
Did you try to turn flight mode on and off?
The few times I had this message doing that resolved the problem.

[Problem] Wifi turns on durning a call.

Like in topic.
It turns on mostly durning incomming call.
I've found some information about this issue on other forums.
Propably coused by enabled DirectPush. When phone starts a call, the EDGE connection is interrupt. Sometimes after 2 minutes, sometimes after few second, Wifi turns on.
Theroy says - DirectPush force wifi to get connected.
It's not happend after soft reset with Wifi off. It happends when Wifi was enabled and disabled before manualy.
This is annoying of course...
Is someone experince this same issue with Raphael? Maybe there is some solution? I like to be "as item arrive" connected...
I have the same issue...using the Proven 14a WWE. During the incomming call the WiFi is turning on. Anybody can help?
Thanks
J.
Same here, started when I installed GB-SOFT tweak to disable data connection after x minutes idle. Wifi turn on when I make or recieve a call, data connection is of when I start the caal and durring the call my TP checks my business mail (set to check account every 5 minutes). Probably caused due to the fact that TP is forced to check my mail but cannot open GPRS or UMTS connection because of the call.
If I set GB-SOFT tweak to always connect to the data network I dont have the issue. So my temporary solution is to stay connected to the network, it at least drains the battery less compared to WiFi.
I've got the same issue. I think it does have something to do with direct push set up for exchange. There really isn't much on the forums (or at least I am having a tough time finding anything) in the way of resolving this. Some were saying that it is a "feature" haha. No thanks!
Well...yesterday I tryied several ROMs..Lantis, ROMeOS, Elite...so far so good at the end I turned back to Proven..however after that jugglin' with ROM's I don't see the WiFi turning on accidentally again...just guessing, maybe it is just some bug during loading process..when you try again you might be lucky ..worth tryin'
cheers
It would help if everyone stated the ROM and Radio as well as other basic information when posting problem reports.
Well, I have ROMeOS 1.60.2 with .28 radio.
I've had this problem on my Hermes as well.
Im 100% sure, that is caused by active DirectPush.
It's just trying to stay connected during phone call and forces wifi to start and connect.
It's very annoying, but i don't think there is solution for this.
Here its stock ROM and radio .20M1. It definately has something to do with trying to make a data connection wile on a call. For me it is however not when I am always connected but when I set "make a connection every 5 mins". Since I changed to radio .20M1 did not experience the WiFi popup, but this can also be because I selected the always connect.
Furthermore I beleive it has something to do with some programme installed lately because I did not see this phenomen the first few months. But what is it ......
OK sorry for that I should mention it earlier...
I have Proven 14a
Radios tested .19, .28, .32 - everywhere the same issue...since yesterday when I wrote my last post I saw it only once! Which is pretty good...till that time it was happening every call.
cheers
Come on guys. it's very simple. If you have defined direct Push "as item arrive", and you turn on than off your wifi, than it's almost for sure that you will have this issue. it's not connected with radio or rom. it's just wm bug.....
the outlook is downloading emails every 15mins...the Push is turned off...how should I setup the outlook to use only GPRS/EDGE connection and not use the Wifi if the GPRS is not available during call?
thanks
J.
I had this issue it was because in network connections it was set to my vpn and not sprint. changed it and it has never done it again
Wifi Turning On
rujelus22 said:
I had this issue it was because in network connections it was set to my vpn and not sprint. changed it and it has never done it again
Click to expand...
Click to collapse
I'm not sure what you mean here exactly. Are you saying that you have a VPN set up? If you did something specific to fix this issue, I'd be very interested in getting more of a step by step, because this is driving me nuts.

Verizon Users Getting Stuck in 1X --- PLEASE READ!

Verizon Users Getting Stuck in 1X --- PLEASE READ!
For those of you who have the plaguing problem of your data connection dropping to 1X, I'm trying to spearhead this issue with Verizon and need your help.
Everytime I open a ticket, it get's closed stating that it's a signal issue with a specific location. We all know that this is not the case. I finally have got ahold of a Tech supervisor who gave me all of his contact information so that we could ALL direct our issue to him. He would then get it elevated through the proper channels and then hopfully they can find a fix. It's my hope that we can all email or call him and explain our issue. He was very nice to work with on the phone and said he is dedicated to getting the problem resolved. I think he's looking at this from a global look rather than an isolated one like every other tech I've spoken to.
Here is his contact information:
Kevin Drakeford
[email protected]
843-566-8600 EXT 1789
Charleston, SC Call Center
Please email or call him with your information and make sure to inform him all of the steps that you've tried that have been unsuccessful (new phone, hard reset, etc etc).
I will try and follow up with him later in the week. Msg here if you contacted him. Hopefully we can get this fixed and be left with just an awesome working phone!
I emailed the guy, it happened once a week when I was on the VZN rom.
dezoris, what rom are you using now? does it not get stuck in 1x?
just curious...
I had this problem on stock VZN ROM and still have it on MightyMike ROM...
Sent Kevin a message
I sent him one!
I haven't had my phone 2 months & this is pissing me off!
I have also had a complete loss of data connection period! Grrrrr
After doing the *228 & option 2 to sync with tower. Got WORSE!
gbruyn said:
Verizon Users Getting Stuck in 1X --- PLEASE READ!
For those of you who have the plaguing problem of your data connection dropping to 1X, I'm trying to spearhead this issue with Verizon and need your help.
Everytime I open a ticket, it get's closed stating that it's a signal issue with a specific location. We all know that this is not the case. I finally have got ahold of a Tech supervisor who gave me all of his contact information so that we could ALL direct our issue to him. He would then get it elevated through the proper channels and then hopfully they can find a fix. It's my hope that we can all email or call him and explain our issue. He was very nice to work with on the phone and said he is dedicated to getting the problem resolved. I think he's looking at this from a global look rather than an isolated one like every other tech I've spoken to.
Here is his contact information:
Kevin Drakeford
[email protected]
843-566-8600 EXT 1789
Charleston, SC Call Center
Please email or call him with your information and make sure to inform him all of the steps that you've tried that have been unsuccessful (new phone, hard reset, etc etc).
I will try and follow up with him later in the week. Msg here if you contacted him. Hopefully we can get this fixed and be left with just an awesome working phone!
Click to expand...
Click to collapse
I haven't had any problems like that with my Verizon Touch Pro 2, that goes for the stock Verizon ROM and the MightyMike one I'm currently using.
This has happened to me a couple of times. It is VERY annoying. and i KNOW it's not a signal issue. What kind of "debugging" should i do before i email the vzw manager guy? I don't want to send an email without doing a little debugging work. That way i seem like i know what i'm talking about.
PS. i agree, this is probably not an isolated issue.
I work at a large international airport in a metro area. It goes without saying there is a ton of cell capacity in the area.
Yet I continually drop to 1X when on a data connection. I always thought this was just "one of those things" or something to be expected. You are saying it is not but a bug in the product/ software / rom, etc?
Happens to be about once every other day. And I just soft reset and it goes back to normal.... Sucks I know.
Just stumbled on this thread and thought I would comment -- my TP2 is actually on Sprint and not VZW, but I've seen this problem fairly frequently even going back to my old Mogul/Titan, so it seems to be a legacy CDMA issue. I think there are two kinds of problems, though, so I am curious to know more about what people are experiencing.
First, as you know, incoming calls or SMS must drop the phone from EVDO to 1X -- this isn't usually a problem because it should snap right back to EVDO after the 1X packets are done. However, I have seen many occasions where it "sticks" on 1X *as long as the phone is still trying to transfer data* -- such as Exchange push or streaming Internet radio. If the phone keeps trying to access the data connection, it will stay in 1X indefinitely most of the time. If the data connection goes dormant for more than about 20 seconds, it seems to finally revert back to EVDO.
The other circumstance is where it seems to just drop to 1X and stay there, and not even cycling the radio on/off seems to make a difference -- you have to soft reset.
I guess what I am wanting to drill into is how many instances are of the first time and how many are of the second. It did take me a while to realize, for example, that if I got an SMS while listening to streaming radio, the data connection was going to drop to 1X and stay there until I closed the streaming radio app. Similarly, I often get as many as 2-3 emails a minute during peak times of the day (I know, my company needs to take some valium), so the constant Exchange syncs never give the data connection a long enough "break" to get back up to EVDO. The main point is, the first type of problem is more or less a CDMA protocol issue that we're probably stuck with, while the second type seems to be a definite bug with either the radio or the OS.
I notice the issue too, but worse it will go into and endless loop of popups letting me know of the situation and the only way to make them go away is to soft reset. Dismissing the popup just makes it come back again over and over. Calling this a legacy CDMA issue is bull as none of my other phones or Blackberries, even my piece of junk Storm have ever done this. Windows mobile needs to give us a decent radio to fix this. The only Verizon EVDO capable Winmobile device I have had that did not have this problem was the XV6700 so this has to be something to do with more recent devices. It has happened on HTC and Samsung devices, so it can't be manufacturer specific. It is the primary reason I moved most of my lines over to Blackberry. I got my wife one of those new Android phones, 1st the HTC one and when she decided she wanted a keyboard, the Moto one and neither one does this.
1x stuck
Same issues as everyone else here to.
i have found when i go to start/settings/connections and launch the comm manager, do do anything just launch it it corrects the issue.
thats strange but it has worked everytime for me.
Everyone whose having this issue on Verizon. Please please please email Kevin on post #1. Having one person as the sole contact on this issue WILL help get it worked out through Verizon. Kevin was very helpful and is a Tech Support Supervisor. Thanks!
Ok verified work around that works for me I'm on day 4 and im still on a EVDO connection.
1. Com manager
2. Press 3G connection and set your network type to auto.
3. dont press ok.
4. Press the X in the top right corner.
5. Soft reset.
So far this method has "fixed" my issue as of 4 days ago. Previously I would go 1 or 2 days before seeing the issue again.
jbruce75 said:
Ok verified work around that works for me I'm on day 4 and im still on a EVDO connection.
1. Com manager
2. Press 3G connection and set your network type to auto.
3. dont press ok.
4. Press the X in the top right corner.
5. Soft reset.
So far this method has "fixed" my issue as of 4 days ago. Previously I would go 1 or 2 days before seeing the issue again.
Click to expand...
Click to collapse
I can't seem to find "3g Connection" as an option or setting under the com mananger. Am I looking in the wrong place? Which OS/ROM are you running?
I am on stock Verizon WinMo 6.1. Thanks for any help.
Sorry your right. Im running the CDMA energy rom. Yours should be stated as Data connection.
You should really consider upgrading your rom. I held out for a long time and just gave in.
I'm actually on verizon with tp2, Verizon is well aware of this issue(as far as i;m concerned). When I put on a custom rom, it showed up, however I needed to put back the default rom from verizon it went away. I put the energy rom back on and it's back. If verizon knows how to ship phones with that annoyance turned off can't we get a fix for the popups?
That pop up is most annoying!
Techitrucker said:
I notice the issue too, but worse it will go into and endless loop of popups letting me know of the situation and the only way to make them go away is to soft reset. Dismissing the popup just makes it come back again over and over. Calling this a legacy CDMA issue is bull as none of my other phones or Blackberries, even my piece of junk Storm have ever done this. Windows mobile needs to give us a decent radio to fix this. The only Verizon EVDO capable Winmobile device I have had that did not have this problem was the XV6700 so this has to be something to do with more recent devices. It has happened on HTC and Samsung devices, so it can't be manufacturer specific. It is the primary reason I moved most of my lines over to Blackberry. I got my wife one of those new Android phones, 1st the HTC one and when she decided she wanted a keyboard, the Moto one and neither one does this.
Click to expand...
Click to collapse
Posible fix for stuck in 1x!
I'm going to go out on a limb here.
I posted in a coupl eother places and got no response on this which was original phone settings before I flashed
Same normal Phone settings for #777
BUT, the other read as follows:
VZWEmbedded
Log on: emsgsm.vzw3g.com
Pass: vzw (I tried our regular password & it worked)
In networking don't select on setup ie just your #777, set it to auto.
Here's my point:
No longer receiving multiple popups for: your device is registering on a voice line
More bars Show up now
Stay in 3g longer and now the phone calls up 3g for when data needs processing and data connection goes live as it should at this point.
Was using engery rom's nov 9 stable, worked with this switch
Now using Energys 6.5.3 28002 rom & working even better.
Running the same radio that came with phone version 1.88.
While i will drop periodically to 1x it does recover on it's own and isn't staying stuck.
Don't want to even look at 1x, update weather lol it works. So I am not to sure it's a hardware issue per say (maybe both who knows) since I have gotten rid of my popups. I'm not a programmer but sounds like a programming issue since it needs the 2nd set of connection strings.
What won't fix the issue is if you are in a bad area with very poor reception. I'm in the middle of a oak grove forest at the bottom of a hill and this is working for me.
Make sure you keep the 3g push in setting on and set to auto
Give ity a try!
Any thoughts on this?
oK AFTER much confusion on ppcgeeks, I need to calrify a few things.
This is a 2nd connection that you need to add.
The GSM is data, normally phone operates in cdma but it is making use of the gsm when over seas for email. It also uses gsm locally for data.
Since adding the 2nd connection all popups are gone. data connections are better on new rom then on stock rom.
If you've made use of JMZ Provisioing you already have the 1st connection under My ISP. Just add the 2nd as noted above and under select network make sure it is set to auto. This allows verizon to switch as needed.
This has been happening to me for about the past 2 weeks. I just e-mailed Kevin. I plan to take it to our on campus Verizon store next week.
I am running a stock ROM with SPB Powershell 3.5 on top of it. EVDO comes can goes. Usually once I try to use an app that requires data (Pocketwit, Opera or even ActiveSync) it drops me to 1X and never connects. I have also gotten several PPP (error code 11) errors. Before this time, the phone had been rock solid with EVDO.
Now my ActiveSync wont even work when I am at home. It only works at work due to being plugged in via USB.
Hope Kevin can help us get to the bottom of it.
I was stuck in 1X for the last few days. My problem was resolved by dialing *228 and pressing '1' to program.

Need Help, Possible new WP7 WIFI bug?

(This is not device specific errors.)
HTC HD7, used for 2 months. From 2 days ago. basically stopped connecting to WiFi networks with NEW names. As soon as taping on the new network, it goes to 'connection unsuccessful' error instantly. (Not even trying to connect), while my other devices working fine on these networks. The phone is actually able to connect to any other wifi network it had previously remembered (SSIDs like linksys, netgear, even other hotel wifis, coffee wifis,). I have tried at least 10 different new wifi network, the phone simply refused to connect..
Note with 'secured network', phone asks for a password, but as soon as taping 'done', error message appearing straight away (connection unsuccessful, note, if typed wrong password, does give a different error, 'invalid password') and ask to retype password. Note, this is not due to wrong password, the password has been thoroughly tested.)
Any ideas?? I have been travelling a lot with my phone these two months. Like 10 different cities...imagine the number of wifi profiles saved in my phone?? like 100+?? The windows phone give up on me?? Comeon....my iphone has not done that in 3 years....
Additional note, the tested networks are 802.11b/g not n. So should be fine......
Since this HALF BUILT windows phone 7 SW does not have other useful menus that allow me to explore a bit further in the phone. All I can do is just restart wifi, phone.....I do not want to reset..BTW, the SW does not offer reset setting option...only reset whole phone.....?
Possible solution:
1. I have read through this forum. Looks like it is possible to play with the registry files (to remove some of the wifi profiles)?
2. When I get home, I will change my home router to the SSIDs that the phone might have connected to and delete them when they pop up to free some space. This way, I should be able to verify my theory!
If you long press a remembered wifi profile, you get the option to delete it
Yes, of cuz. But u have to let the remembered network to appear in your list in the first place? How do you do that when u r travelling around?
This is just ridiculous.
I am seeking methods outside what I mentioned above.
Waiting for someone to help here...
I have tried to change my home network SSID to those the phone had previously remembered and made some discovery.
Basically the phone is able to connect to thos old SSID given they are unsecured. I was also able to delete those profiles...
However, here is the however, after deleting several old profiles, I still was not able to connect to new wifi network...And what was worse, after restarting the phone, I cannot connect to the previous SSID I have just deleted....
Basically, the phone has stopped accepting new Wifi profiles....This is some serious software bug.
A SW that is full of BUG and no fixes and no one cares...
OaG_sGm said:
A SW that is full of BUG and no fixes and no one cares...
Click to expand...
Click to collapse
I imagine Microsoft tech support would care if you called them.
The only thing you can try is to hard reset.
Sent from my OMNIA7 using Board Express
OaG_sGm said:
A SW that is full of BUG and no fixes and no one cares...
Click to expand...
Click to collapse
I didn't realize we worked for MS. Like most severe smartphone problems, you need to hard reset. If you talk to MS support they will tell you that, if you call the OEm, they will tell you that as well.
edit: and how do you know this isn't device specific?
The OP is correct. There is no way to delete remembered wifi networks without actually being in its vicinity. I have had this problem. Sometimes, a soft reset fixes the problem. Other times, I delete the network, then try reconnecting. Other times, if the router is accessible, a quick power rest fixes the problem. Also, sometimes, connecting to another network, deleting it, and then reconnecting back to the desired network solves the problem.
However, there are times that the wifi simply refuses to connect no matter what.
This looks more like an software problem. But I should not have said it is not a device specific problem 100%.
Till today, I have used Tune to backup my pictures...but have not decided to reset it yet. Cuz a lot of things need to be manually restored..
I think I will wait for the first important update come out and see if that fixes anything.
All of these arises because the OS is like a rush job, a lot of functions and menus simply does not exist.....
My phone still refuses to connect to ANY NEW wifi network. Including the one it remembered (if I delete them)
This problem has not been solved still. Just wondering is any body else having the same problem?
just ride off wp7, go for android htc desire hd,this thred will go for soooooooo many pages until you get solved your problem.please dont waist your time here like me.
This problem has been FIXED with March update!!! Now the phone runs faster and there are heaps of apps. Now I am waiting for flash and skype api etc...

Categories

Resources