Hi, yesterday I tried to upload to my phone radio rom.It seems that the files had confused because now I can not enter bootloader mode.I see only black screen.When I plug the phone into usb red LED lights up.just when I push power + back.Also, when I push power + back and lit the red light.Is it hard to restore it to life and yet I still enjoy the brick?
Sorry for my bad english
Wrong forum.
Anyway, are you able to boot to recovery (home+power)?
why would you be messin with the radio on a MyTouch or whatever 32b model u got theres no need to fool with it
Related
So i just flashed my vox with dr.gonzo's new 1.0 rom...and I did it the same way i've been doing it for months now (since his first rom 0.1) and it all went good, but when it was suppose to reboot turned off but never turned back on....I turn it on manually and i see the htc logo, it vibrates and then black screen... nothing happens afterwards...please dont tell me its bricked...please.....
If you're not able to get it into the bootloader to run an RUU then I suggest that you flash a signed HTC ROM, flash USPL and then re-flash New Guava v1.0
how do i flash a signed htc rom? when i turn it on, the htc logo comes on, then vibrates, and then a black screen.... when i try a hard reset, it asks me to confirm by pressing send. i press send (correct me if i'm wrong, send is the green 'phone' button right?) and it loads up the htc logo, vibrates and then shuts off. I've never had a bricked phone before, this all just doens't make sense i did the same steps that i've always done.
Seriously? Your phone is not bricked.
If you've flash a ROM before, it's the exact same procedure - what you can try and do is load into the bootloader by holding the camera button and plugging in a USB cable, it will start into the tri-color screen and should show USB is connected then you can flash a signed HTC ROM.
If the ROM is corrupt, this is your best way of "recovering" your phone, if the ROM was flashed properly, after getting into the bootloader, run ruurun 0 and ResetDevice to boot it back into OS.
oh ok, i haven't tried that yet (bootloader mode that is). Now you say i do this by plugging the usb and holding the power button and camera button? is that how it works? h4waii, you just lightened up my day by giving me some hope!
That is how you can enter the boot loader.
1). Turn off and unplug the Vox from external power/USB cable
2). Press and hold the camera button
3). Insert external power/USB cable
4). Continue to hold camera button until you enter the tri-color screen
At this point, you should have a "USB" text label on the bottom left hand side indicating USB is detected - you can then run an RUU from a signed HTC ROM to update it.
press and hold the camera button alone? i tried that, it doesn't power up the unit though?
Yes it does. Hold camera and plug in your USB cable (making sure it's also plugged into your computer).
ok i got it to the triband screen, but when i ran dr.gonzo's rom it got to 3% and said its corrupt. so i'm gonna do what you said and flash a signed htc rom. hopefully it works....
Yes, 3% because SPL is not patched to allow an unsigned ROM to be loaded, flash an HTC ROM to it, once that is complete you can run USPL to re-flash New Guava.
It will work, don't need to hope
you are a godsend! literally have no idea how depressed i was yesterday! being a university student money is very tight right now so was a total shock when i realized i bricked my $350 phone....I wish i had money cause i'd send you some for being so helpful but I dont... So just please understand i REALLLY appreciate your help, thank you.
That's what we're here for. Glad to be of service.
Hi, yesterday I tried to upload to my phone radio rom.It seems that the files had confused because now I can not enter bootloader mode.I see only black screen.When I plug the phone into usb red LED lights up.just when I push power + back.Also, when I push power + back and lit the red light.Is it hard to restore it to life and yet I still enjoy the brick?
Sorry for my bad english
If it is Bricked (meaning you can't get into Recovery or FastBoot) you're pretty much screwed, thats why they call it a Brick.
kbeezie said:
If it is Bricked (meaning you can't get into Recovery or FastBoot) you're pretty much screwed, thats why they call it a Brick.
Click to expand...
Click to collapse
better send it in to HTC dude and see if it is fixable.
2girls1cup said:
better send it in to HTC dude and see if it is fixable.
Click to expand...
Click to collapse
Would HTC even warranty that? I mean if you're bricked you're likely going to leave evidence of trying to root it, since not like you can do anything to the phone before sending it in.
I've heard rumors of the black screen with LED being a radio loader. I'm not sure what file it's looking for you might want to try adb shell or fastboot from the sdk. At least you are getting some response. When I bricked mine it wouldn't even give me the LED.
Good luck!
try this
i bricked my phone not to long ago, but try going to this link and download the file. was you do that save it to your sd card and rename it sappimg.nbh. boot your phone to fastboot by hold the volume down and pressing the power button. when the screen comes up it should have some stuff pop up and the it should say recover or something like that. once it has done that press the action ball and it should start recovering. when its done it will ask to reboot. click the action ball again. if that doesnt work well then sorry... good luck
darealest1224 said:
i bricked my phone not to long ago, but try going to this link and download the file. was you do that save it to your sd card and rename it sappimg.nbh. boot your phone to fastboot by hold the volume down and pressing the power button. when the screen comes up it should have some stuff pop up and the it should say recover or something like that. once it has done that press the action ball and it should start recovering. when its done it will ask to reboot. click the action ball again. if that doesnt work well then sorry... good luck
Click to expand...
Click to collapse
What link?
I don't know if this will work for a mytouch or not...
forum.xda-developers.com/showthread.php?t=576628
Good Luck!
The link for anything and everything you would need is on Cyanogen's page (bless him!). Here's the link!
guys ,, I was flashing the radio or of HTC magic 32A and what happened that it stopped responding while flashing from ADB and then phone restarted on a screen with box+ arrow + phone ... cannot enter recovery or fastboot , only that blue led when pressing the trackball + power ,,,
any help ???
I am in egypt and got that phone from here its so expensive
I hope I didn't totaly brick it ,,, actually it accepts charging with orange led ,,, and seems to be fine wit hardware ,,,, only that how to get the recovery or the fastboot again !!! ..not recognized on PC for sure ,,,
When you get to the screen of the box and arrow, hit Home + Power again.
You're bricked if you can't enter fastboot, and you can't enter recovery, and all you see is the boot screen.
Please search the forum,
http://forum.xda-developers.com/showthread.php?t=557091
Ok, so this is all I can get from my HTC Magic 32A.
It doesn't matter what key combination I press, it is always the same.
So I would like to know is there anyway to fix it?
I tried all known solutions, like applying recovery from sdcard, adb etc.
nothing is possible, because phone is not entering fastboot nor recovery.
But it keeps turning on so there MUST be a solution.
Here is video of what I get when I try to turn it on.
youtube.com/watch?v=TBciNMhoAs8
one more thing that I get is blue led when i press trackball and power button. but no screen turning on...
You haven't told us what you did before getting this...
OK...I got this when tried to upgrade radio and spl...
from then till now i got only this screen...
What have you done?
Have you flashed the radio BEFORE the SPL? Any errors?
BTW that image could be the RUU screen (not sure as I have never updated my phone in that way)
Well don't know what was the 1st thing done, cause my friend did it, and i am trying to fix it. he was trying to upgrade radio to 6.35 and spl to 1.76
so any suggestions?
elegos said:
What have you done?
Have you flashed the radio BEFORE the SPL? Any errors?
BTW that image could be the RUU screen (not sure as I have never updated my phone in that way)
Click to expand...
Click to collapse
Isnt the RUU screen because thats similar to the fastboot one.
So what is this screen?
Any chance to boot up again?
going back to the blue LED when you press trackball, that is the radio bootloader, so ive been told.
yes i know that, but there is no chance to do anything with usb cable.
maybe only with some serial cable an disassembling (opening phone to the parts). and I don't know how to do it, don't have serial cable....etc...
Anybody, anything?
ok...so i took my htc magic to service, and they told me that they'll try to flash it from linux and reprogramme evrything...
still waiting...
Me too,
Anybody have a new idea?
I upgrade radio 2_22_19_26I from recovery (RA Sapphire 1.6.2), then my phone can't access bootloader, recovery console....
Only HTC Magic logo display on screen always.
can you enter fast boot? (back and power buttons)
damjand said:
can you enter fast boot? (back and power buttons)
Click to expand...
Click to collapse
No, I can't enter fast boot, and recovery. HTC Magic logo always appear.
have you tried to flash recovery via adb?
or maybe you should try with goldcard...
Computer not recognize my phone, I can't do anything from computer (adb and fastboot).
What is goldcard? Can you show me?
Does any of you have the blue led??
damjand said:
ok...so i took my htc magic to service, and they told me that they'll try to flash it from linux and reprogramme evrything...
still waiting...
Click to expand...
Click to collapse
Do they were able to fix it?
i am still waiting for my phone...called today, it is still in que for fixing...
this is explanation for goldcard
http://forum.xda-developers.com/showthread.php?t=572683
i have blue led when i press trackball and power...
read somewhere it is kinda a radioloader!?
ronni.rasmussen said:
Does any of you have the blue led??
Click to expand...
Click to collapse
Yes, I press trackball and power button, the blue led is on.
I hope you have a solution.
Tried making my own Custom Rom using Rangerby, Fallen Saint, Shabby Penguin and arrrghhh parts to make a Sweet Pie (mod lol)... Now... The Phone Just keeps rebooting into recovery mode TWRP, CWM or even Recovery. I know I haven't "bricked" it yet... but any advice on how to remove this little issue?
To recap... turns on phone... shows moto logo... then turns to revcovery mode,
turn it off again/reboot... the same thing... any advice would be appreciated and i mean real advice
EDIT:
Alright good news... After careful research, I found a logical Item I kept overlooking over 2hrs ago
Make sure phone is turned off, then hold PWR + CAMERA until you see boot mode, then use the VOL DWN KEY till you reach BP Tools, then Hit VOL UP to select. Sit back and enjoy