Database Info

HTC Touch Pro T7272 Stuck at Startup

Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.

squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping

Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.

Had You try flash via SD Card?

erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.

Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.

HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.

nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....

...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...

Anyone with a clue on this? is this phone bricked then...

you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go

Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.

Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?

...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...

You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.

Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs

How about flashing official ROM via microSD card?

patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.

No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse

...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse

Help with bricked Magic 32B

Hi, yesterday I tried to upload to my phone radio rom.It seems that the files had confused because now I can not enter bootloader mode.I see only black screen.When I plug the phone into usb red LED lights up.just when I push power + back.Also, when I push power + back and lit the red light.Is it hard to restore it to life and yet I still enjoy the brick?
Sorry for my bad english

If it is Bricked (meaning you can't get into Recovery or FastBoot) you're pretty much screwed, thats why they call it a Brick.

kbeezie said:
If it is Bricked (meaning you can't get into Recovery or FastBoot) you're pretty much screwed, thats why they call it a Brick.
Click to expand...
Click to collapse
better send it in to HTC dude and see if it is fixable.

2girls1cup said:
better send it in to HTC dude and see if it is fixable.
Click to expand...
Click to collapse
Would HTC even warranty that? I mean if you're bricked you're likely going to leave evidence of trying to root it, since not like you can do anything to the phone before sending it in.

I've heard rumors of the black screen with LED being a radio loader. I'm not sure what file it's looking for you might want to try adb shell or fastboot from the sdk. At least you are getting some response. When I bricked mine it wouldn't even give me the LED.
Good luck!

try this
i bricked my phone not to long ago, but try going to this link and download the file. was you do that save it to your sd card and rename it sappimg.nbh. boot your phone to fastboot by hold the volume down and pressing the power button. when the screen comes up it should have some stuff pop up and the it should say recover or something like that. once it has done that press the action ball and it should start recovering. when its done it will ask to reboot. click the action ball again. if that doesnt work well then sorry... good luck

darealest1224 said:
i bricked my phone not to long ago, but try going to this link and download the file. was you do that save it to your sd card and rename it sappimg.nbh. boot your phone to fastboot by hold the volume down and pressing the power button. when the screen comes up it should have some stuff pop up and the it should say recover or something like that. once it has done that press the action ball and it should start recovering. when its done it will ask to reboot. click the action ball again. if that doesnt work well then sorry... good luck
Click to expand...
Click to collapse
What link?

I don't know if this will work for a mytouch or not...
forum.xda-developers.com/showthread.php?t=576628
Good Luck!

The link for anything and everything you would need is on Cyanogen's page (bless him!). Here's the link!

[Q] Bootloader Froze. Fastboot not working. Please help!

Hi,
My Nexus S was working great and suddenly the power button stopped working, now when I try to flash anything via fastboot it freezes at the bootloader screen, the volume keys don't work just there.
I wanted to flash stock ICS bootloader, radio and ROM but I guess there's no way to flash without fastboot? adb works though.
Thanks for your help!

ibr4him said:
Hi,
My Nexus S was working great and suddenly the power button stopped working, now when I try to flash anything via fastboot it freezes at the bootloader screen, the volume keys don't work just there.
I wanted to flash stock ICS bootloader, radio and ROM but I guess there's no way to flash without fastboot? adb works though.
Thanks for your help!
Click to expand...
Click to collapse
Is your power button failing by any chance? If the power button fails and stay in a clicked position, you will not be able to scroll.

No, the power button, physically, is perfect, just as it was before. it just doesn't 'function' anymore.

ibr4him said:
No, the power button, physically, is perfect, just as it was before. it just doesn't 'function' anymore.
Click to expand...
Click to collapse
So it works or it doesn't work? That's what I mean by failing, when it stops working, you will not be able to scroll in fastboot mode because it's stuck as clicked in. In fastboot you cannot send 2 keystrokes at the same time, so as long as the power button is stuck you're out of luck.
Sometimes playing with the power button will make it unstuck, sometimes it will not. It's a very common problem with the Nexus S. Some people had decent luck opening up their Nexus and cleaning the power button while others sent their phone to repair.

No, it does not function. BUT, what I'm thinking is, if i the power button was CLICKED then the first option is "Restart Bootloader" and it would have been auto-selected resulting in a reboot-loop, but I do see the bootloader screen and it doesn't disappear until I remove the battery and restart.

ibr4him said:
No, it does not function. BUT, what I'm thinking is, if i the power button was CLICKED then the first option is "Restart Bootloader" and it would have been auto-selected resulting in a reboot-loop, but I do see the bootloader screen and it doesn't disappear until I remove the battery and restart.
Click to expand...
Click to collapse
That's not how it works though. It's constantly clicked, not as clicking only once the bootloader appears. I know it's strange, but it's really a well known issue.
If you remove the battery and put it back in, does your phone start automatically? That's also a sign the power button is stuck.

No, If I remove the battery and reinsert, it does NOT autostart unless its also connected to the PC via USB.

ibr4him said:
No, If I remove the battery and reinsert, it does NOT autostart unless its also connected to the PC via USB.
Click to expand...
Click to collapse
Alright. Does not necessarily mean the button isn't stuck though.
Do you have a custom recovery? If you use Clockworkmod or TWRP, you can flash nearly anything from there, rom, radio and so on as long as they're zipped in a way one of these recovery will understand.
If you are still able to boot your rom and it's rooted, but you don't have a custom recovery, you can flash one from within Android.

Oh, I thought you could only flash bootloader, radio and ROM via fastboot, atleast thats how I did so far. I download factory images and they come as .img files, is there anywhere I can find a flashable stock ICS .zip?
Yes, I can boot into the stock JB rom, and yes I can even access clockwork recovery.

ibr4him said:
Oh, I thought you could only flash bootloader, radio and ROM via fastboot, atleast thats how I did so far. I download factory images and they come as .img files, is there anywhere I can find a flashable stock ICS .zip?
Yes, I can boot into the stock JB rom, and yes I can even access clockwork recovery.
Click to expand...
Click to collapse
You were doing it the good way though, fastboot is a very strong utility.
Here's one flashable with CWM.
http://forum.xda-developers.com/showthread.php?t=1569509&highlight=rom
ONLY for GSM Nexus S. Not for 4G. This is really important.

One more way I was able to confirm that the phone indeed freezes on bootloader is that adb commands are accepted on the home screen or on CWM (./adb reboot bootloader for example), but neither adb nor fastboot works on the bootloader (error: device not found).

I opened the phone to clean the power button as you suggested, but its already quite clean, there's nothing to do there. However, I broke my sim tray in the process! :'(
Now, no power button and no network!

ibr4him said:
I opened the phone to clean the power button as you suggested, but its already quite clean, there's nothing to do there. However, I broke my sim tray in the process! :'(
Now, no power button and no network!
Click to expand...
Click to collapse
Ouch! That's not good at all. :|
Some people blast the button with compressed air or clean it with isopropyl alcohol.

Cant enter recovery, stuck on HTC logo

Power button on my HTC One S stopped working to I decided to fix it. I discharged the phone completely and opened the phone. I got to the switch and it fall apart from the motherboard so I soldered it in place. I dont know what could cause this, but now The phone doesnt want to boot. Its stuck on HTC logo with red warnings. Phone was running great on TrickDroid 9.1.0 before the discharge/opening. However Im able to enter bootloader. I can use fastboot usb ( I triend to flash different boot.img and recovery but it doesnt help. fastboot show flask OKAY but still, phone doesnt want to boot. When I choose recovery from hboot It will reboot into htc logo without warning, the status bar in the corner will pass 2 times and after 30sec it will just reboot into warning logo.
I have HBOOT 1.09.
Does anyone know what happend?

Discharging the phone is bad.This is a common issue, especially if youre using CWM.
If you are using CWM - change to TWRP.

Goatshocker said:
Discharging the phone is bad.This is a common issue, especially if youre using CWM.
If you are using CWM - change to TWRP.
Click to expand...
Click to collapse
Great advice cuz in my opinion 'TWRP' is way better interface but can you give him more detail and I'm sure in this case he would not mind being treated as a noob, I would but I'm not as good as you and Darknites lol :good:

I downloaded t-mobiles ruu and installed it in fastboot. everthing installed fine, updated radio and hboot. But still its looping on htc logo. hboot is 1.14 and is relocked. Any ideas?

krzysiek033 said:
I downloaded t-mobiles ruu and installed it in fastboot. everthing installed fine, updated radio and hboot. But still its looping on htc logo. hboot is 1.14 and is relocked. Any ideas?
Click to expand...
Click to collapse
Re check the power button, and are the touch keys blinking at anytime when you turn on the device?

ultraprimeomega said:
Re check the power button, and are the touch keys blinking at anytime when you turn on the device?
Click to expand...
Click to collapse
They blinking only if I hold the power button for few sec.

krzysiek033 said:
They blinking only if I hold the power button for few sec.
Click to expand...
Click to collapse
Its not good that its still looping after using a RUU but try factory reset or you can try just unlocking the bootloader and trying a custom rom.

[Q] On black screen, warranty, ruu and other things.

Hi Guys
I'm in mildly troublesome waters and I was hoping that the people here would help me figure my way around a solution.
So about a week or so ago, my AT&T one XL (which is on CM10.1 stable) started behaving weirdly; the screen wouldn't turn on but all the touch functionality would still work as I was able to receive calls by just using my instincts on knowing where what should be. Now at that point, if I pressed different parts of the screen, it would turn on for a few seconds and then the screen would black out again. The buttons do light up.
But as of yesterday, my screen won't turn on no matter where I apply pressure to try to get it to turn on. The screen still works and I can randomly turn on 'Google Now' and and other stuff as long as I know where what is located on the screen.
I called in AT&T as my phone is still in warranty and they are sending a replacement. However, I'm now in a bit of a race-against-time to get my phone back to stock and hopefully even get rid of the *tampered* sign that shows up in fastboot. I was wondering what my options are to get this done at this stage as I'm not even able to tell when I'm in the fastboot mode. I'm worried that if I don't send it back with atleast stock settings then I'm liable to pay a replacement fee of 500$!
Also, does anyone have any experience with sending in a phone that was jailbroken and not running stock but still under warranty?
Any help/information would be great!
Thanks
Angadh

your screens cable is loose or damaged. is your phone s-off? do you recall if u had usb debugging enabled?

I was on 2.20 when I rooted the phone so I'm guessing that implies I didn't s-off. No recollection if I left usb debugging on, but I'd like to tihnk I did!

gadha007 said:
I was on 2.20 when I rooted the phone so I'm guessing that implies I didn't s-off. No recollection if I left usb debugging on, but I'd like to tihnk I did!
Click to expand...
Click to collapse
if usb debugging is on:
use adb to boot to blootloader then relock and ruu to 2.20 you would need to s-off to ruu to 3.18 or to spoof the relocked. tampered should disappear when you ruu.

exad said:
if usb debugging is on:
use adb to boot to blootloader then relock and ruu to 2.20 you would need to s-off to ruu to 3.18 or to spoof the relocked. tampered should disappear when you ruu.
Click to expand...
Click to collapse
Thanks for the info, exad.
So what I tried now was to use the hasoon all in one kit and clicked on the 'Boot into Bootloader' under commands. I got 'error: device not found'. That implies I'm not in USB debugging, right? So do I have any other options from here?

gadha007 said:
Thanks for the info, exad.
So what I tried now was to use the hasoon all in one kit and clicked on the 'Boot into Bootloader' under commands. I got 'error: device not found'. That implies I'm not in USB debugging, right? So do I have any other options from here?
Click to expand...
Click to collapse
yea you can manually boot to fastboot. press and hold power. the capacitive buttons will blink a bunch of times, when they stop blinking let go of power, press and hold volume down.
then you can go on from there.

exad said:
yea you can manually boot to fastboot. press and hold power. the capacitive buttons will blink a bunch of times, when they stop blinking let go of power, press and hold volume down.
then you can go on from there.
Click to expand...
Click to collapse
The phone just seems to boot back up to CM. Ican't tell if I'm doing something in fastboot that makes it go back into CM. Any other ideas? or indicators?

gadha007 said:
The phone just seems to boot back up to CM. Ican't tell if I'm doing something in fastboot that makes it go back into CM. Any other ideas? or indicators?
Click to expand...
Click to collapse
thats all ive got.

exad said:
yea you can manually boot to fastboot. press and hold power. the capacitive buttons will blink a bunch of times, when they stop blinking let go of power, press and hold volume down.
then you can go on from there.
Click to expand...
Click to collapse
Okay. So i was just messing up but after multiple attempts, I finally did it. Thanks for the help. You are awesome!