Related
Hi to all,
I been trying to upgrade to JF 1.14 rc33 and haven't been able to get to the recovery mode to process the update.zip file. Im not a noob but also not and expert i rooted my my phone so i know basics. When i try to hold the home butoon and power button the g1 logo keeps reappearing for as long as i hold it from 10 seconds to 2 minutes. any ideas of what im doing wrong, i dont care if i have to wipe i just want rc33. Thanks.
I currently have Fimware 1.0
Build #:1.0 TC-4 RC30
Custom Theme: Windows beta 7
Just to make sure, with the phone off you press and hold the home button and then press and hold (while still holding the home button) the power button. It should take ~20 seconds for the recovery mode screen to come up.
Dharkaron said:
Just to make sure, with the phone off you press and hold the home button and then press and hold (while still holding the home button) the power button. It should take ~20 seconds for the recovery mode screen to come up.
Click to expand...
Click to collapse
i tried and did not work
natienn said:
Hi to all,
I been trying to upgrade to JF 1.14 rc33 and haven't been able to get to the recovery mode to process the update.zip file. Im not a noob but also not and expert i rooted my my phone so i know basics. When i try to hold the home butoon and power button the g1 logo keeps reappearing for as long as i hold it from 10 seconds to 2 minutes. any ideas of what im doing wrong, i dont care if i have to wipe i just want rc33. Thanks.
I currently have Fimware 1.0
Build #:1.0 TC-4 RC30
Custom Theme: Windows beta 7
Click to expand...
Click to collapse
Flash back to the original G1 theme, then try the update. Your theme may be preventing you from upgrading.
andonnguyen said:
Flash back to the original G1 theme, then try the update. Your theme may be preventing you from upgrading.
Click to expand...
Click to collapse
how do you flash to the original theme? do you know of any links? thanks
Start holding the Home button before you press the Power button.
jashsu said:
Start holding the Home button before you press the Power button.
Click to expand...
Click to collapse
i tried that in different time lentghs from 10 seconds holdin both to 2 minutes, of course pressing the home key 1 sec before the power and holding both
Same problem
Need to bump this thread as I'm having the same issue. Have a HTC Dream with CyanogenMod-5.0.7-DS, trying to go to 5.0.8, but cannot get into Recovery Mode.
Yes, I am completely powering the phone off, holding Home just prior to pressing & holding Power. I keep both depressed for a few minutes and no joy, just sits at the G1 splash screen. I can remove the battery and press Power to bring the phone up normally. Have even dropped to the console, switched to root and issued "reboot recovery". The phone restarts and sits at the G1 splash screen as well.
Can anyone offer advice on how to restore my Recovery Mode? Many thanks...
You can try to reflash (or flash another) recovery with adb, fastboot or in terminal. Btw this thread is in wrong section. It should be in Q & A section.
You could even flash a recovery image from within your rom...you said you could boot the phone normally correct?
So drop into terminal and flash it if you don't want to mess with adb.
The Amon Ra 1.7 Recovery thread has the commands you need to flash through terminal...
These people apparently are no help. If you hold down the home key and it stays at the G1, try fastboot by holding down the camera button on the side while you power it on. You only need to hold the home key until it vibrates. It should instantly boot into fast boot, if you're holding down camera when powering on.
... if you can get into fastboot, you might need to unroot your phone and reroot it.
... if you can't get into fastboot or recovery mode, then you probably bricked your G1 and you'll need a jtag or scrap it. Or if it's under insurance, tell them you updated and your phone is stuck on the G1 screen....
You could also try taking out your battery then powering it on into fastboot/recovery but odds are that wont help at all.
Hope this was some help.
yutsoku said:
These people apparently are no help. If you hold down the home key and it stays at the G1, try fastboot by holding down the camera button on the side while you power it on. You only need to hold the home key until it vibrates. It should instantly boot into fast boot, if you're holding down camera when powering on.
... if you can get into fastboot, you might need to unroot your phone and reroot it.
... if you can't get into fastboot or recovery mode, then you probably bricked your G1 and you'll need a jtag or scrap it. Or if it's under insurance, tell them you updated and your phone is stuck on the G1 screen....
You could also try taking out your battery then powering it on into fastboot/recovery but odds are that wont help at all.
Hope this was some help.
Click to expand...
Click to collapse
Why would you need to reroot it, just flash a new recovery through fastboot.
fastboot flash recovery <name>.img
misread, yeah he could do that too but it would be easier to reroot if he knows how to do that... instead of learning a whole new method.
You're right though, that would be better.
Update
I am able to fastboot by holding the camera button in and powering on. It sounds like I just need to do the Amon Ra Recovery procedure in order to restore my recovery partition. I assume that I'll need to re-root, but I'm sure there are instructions there for that as well.
Thanks for all the quick replies!
So here's what I found....
I had the exact same problem, but first a little history then how I fixed it.
I purchased an 8GB MicroSD card so I could use Apps2SD and was quite pleased with the ability to do so. Until my battery life dropped to 5mins. It was already down from when I bought it last year.
The battery was severely screwed on my. If I used ANYTHING for more than 5 mins, it would die and would NOT boot up. Oh I could pres the power button and it would try to boot but then die somewhere in the boot process. That is until I plugged it into some charger (car or wall) and then it would boot, showing anywhere from 70 to 90% battery life.
After much research I found that it was the battery and so ordered a replacement off eBay from Hong Kong. $3.96 shipped to my door. Works great, and I am incredibly thankful for that.
So just prior to getting the battery I had done an upgrade to 5.0.8 with the vain hopes that it might help limp along but to no avail. The battery was gone.
Ok, so in comes the new battery. Great! I'll just reflash the ROM to make sure there are no lingering issues and we'll be good to go! Little did I realize that I did an 'upgrade' from CM Updater and when I booted into Recovery I flashed th zip file that was there....which was 5.0.7. DOH! No biggie, everything was working so I didn't worry too much.
Then I installed Clockwork's ROM Manager 1.8.x. A few days later there was an update, so I updated to 2.0.1.3. So I updated that. It went fine.
Few days later, and a few more apps re-installed, the system was running slow.
Apps2SD was greyed out. Huh?
Checked the card....Ubuntu was only mounting it Read Only. And the old swap partition, which I thought I had deleted, was still there. Dammt. But this s a side story I think.
So I wanted to reflash but there was no way I could do it because I could not get into Recovery mode. Ugh.
ROM manager had an update to 2.0.1.4. Ok, maybe that'll work. Nope. It said it updated fine but stuck at G1 logo like many others.
Doing some googling around I saw that it was a ROM Manager issue and that you should flash back down to 1.4.x. Well, since I knew it was working at 1.8.x I decided to reflash to 2.0.0.3. I could get into recovery mode now!
While this kinda solves one issue....I'll have to go into another thread to figure out the Read Only problem so I can re-partition my card again.
Thread closed. Please post questions in the Questions and Answers forums and not in the development forum.
So I've been trying try to install ARHD, and in the process, I went to boot my phone into bootloader.
Cue, phone not turning on.
Hold down the power button, nothing
Hold down the power+vol down, nothing.
The only glimmer of hope is that when I plug it in, windows says "Hey, there's a device here!" But I think that could just be the generic sound it plays when it realises something is plugged in, whether it works, or not.
I apologise for making *another* brick thread, but it seems most of the "bricked" threads I could find say "My phone just has infinite boot animation, am I bricked? :<" or things similar.
If there's any way, any way at all, to fix this, I would be... appreciative, to say the least.
Prior to possible brickage -
I was following this which in turn linked me to this, I got to "7. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)"
That's it. Nothing else, other than the build up to it, such as plugging it in and moving the files to the C drive and such and such. And then I just did "adb reboot-bootloader", and... it didn't like it.
Any way to undo a brick if I am, or is it completely dead? Off to the phone graveyard?
Thanks in advance.
Valk
Valkorian said:
So I've been trying try to install ARHD, and in the process, I went to boot my phone into bootloader.
Cue, phone not turning on.
Hold down the power button, nothing
Hold down the power+vol down, nothing.
The only glimmer of hope is that when I plug it in, windows says "Hey, there's a device here!" But I think that could just be the generic sound it plays when it realises something is plugged in, whether it works, or not.
I apologise for making *another* brick thread, but it seems most of the "bricked" threads I could find say "My phone just has infinite boot animation, am I bricked? :<" or things similar.
If there's any way, any way at all, to fix this, I would be... appreciative, to say the least.
Prior to possible brickage -
I was following this which in turn linked me to this, I got to "7. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)"
That's it. Nothing else, other than the build up to it, such as plugging it in and moving the files to the C drive and such and such. And then I just did "adb reboot-bootloader", and... it didn't like it.
Any way to undo a brick if I am, or is it completely dead? Off to the phone graveyard?
Thanks in advance.
Valk
Click to expand...
Click to collapse
of all things you tried i think you havent tried this
can you try it and reply
rebooting to bootloader manually:
To reboot to bootloader remove your battery, reinsert, hold volume down and press power button. Do not release Vol down until booted into bootloader
if you got into bootloader and then your phone is not bricked..you can bring back your mobile to life completely
if that didnt helped you..click on IRC HELP CHANNEL in my signature and join it and express your grievance there ?
ganeshp said:
To reboot to bootloader remove your battery, reinsert, hold volume down and press power button. Do not release Vol down until booted into bootloader
Click to expand...
Click to collapse
Doesn't look like that worked. I shall go and have a look at the channel now, thanks anyway.
Valkorian said:
Doesn't look like that worked. I shall go and have a look at the channel now, thanks anyway.
Click to expand...
Click to collapse
Helo try to connect all the pins in the phone (battery place) for 10 seconds at least with power button pressed without battery then try to start it again
Good luck
Hey if its still not working just use the emmc_recover method to fix hboot.
http://forum.xda-developers.com/showthread.php?t=1522351"
follow these steps to fix it. I had the same problem and fix it with this method but please search for the revolutionary 1.27.1100 hboot whicht is s-off from here http://forum.xda-developers.com/showthread.php?t=1459767 use the one from the 32.xxx firmware and all should be fine
Would the RUU help ?..
Hey !
I had something similar happen to me. Since Windows could see the device, I tried flashing a stock RUU (...) .exe from it and... back to life it came !
Good luck !
quietmoth said:
Hey !
I had something similar happen to me. Since Windows could see the device, I tried flashing a stock RUU (...) .exe from it and... back to life it came !
Good luck !
Click to expand...
Click to collapse
Something like this, since windows is finding it, you may be able to reset it into bootload through ADB.
"ADB reboot bootloader"
If you can get that, you can get back into recovery.
Sent from my Sensational LeeDroid Beater.
Hello, just to start I have read through probably 100 post regarding similar issues but none are working. I have the ATT Htc one x EVITA 3.18 version. I did the super CID unlocked my bootloader through htc dev, flashed twrp recovery, and got a custom rom, gapps etc.. in twrp I wiped all data,system,cache, factory reset. Then flashed my rom and gapps (being kinda new to HTC devices I didn't flash the boot.img from the rom) now my phone after restarting just continues a bootloop (HTC Quietly Brilliant) screen, then powers off repeating this over and over.. I tried holding the volume down with the power button it just loops again, the I tried some other suggestions like holding power and vol down until the flashes stop and releasing power while continuing to hold volume down, again loops, then tried using volume up as well...none of these are working I don't understand what happened and why I can't get into any of these? I did not run any RUU. I tried using adb but of course i cant get into fastboot or anything so the phone is not recognized. If anyone could please help I really do appreciate it. I know this has been all over the threads but I read for the past 3 hours and could not get anything to work.. Thanks in advanced for any help it is much appreciated. :crying:
First of all, don't hold volume up and power, that's bad news. Trying random button combinations is a really bad idea. While it's looping just hold volume and the next time it starts again it should reach the bootloader.
Sent from my Evita
timmaaa said:
First of all, don't hold volume up and power, that's bad news. Trying random button combinations is a really bad idea. While it's looping just hold volume and the next time it starts again it should reach the bootloader.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the reply timmaaa... I usually would not try the other button presses just someone else had said that worked for them, but thanks for the advice. I did try what you said and just holding the volume down button, let it bootloop, and keep holding and it just continues to bootloop :/ it stay off for about 20 seconds the same then bootloops, with the htc screen for about 5 seconds the rinse and repeats D**n this thing is annoying. Any other Ideas? Thanks again man appreciate it.
if you are SOFF u can go for RUU?
Sonone said:
if you are SOFF u can go for RUU?
Click to expand...
Click to collapse
No I'm still s-on I didn't try to RUU cus I read it would brick..but seems I'm somewhat bricked anyway:silly:
sensei_777 said:
No I'm still s-on I didn't try to RUU cus I read it would brick..but seems I'm somewhat bricked anyway:silly:
Click to expand...
Click to collapse
are you sure you did get the SUPER CID cause if its not then you can RUU your device!
cause if you are not SUPERCID get a matching RUU or a latest version meant for your device!
only if you could somehow manage your phone to get recognized by a PC etc then you could flash boot.img with some toolkit etc and everything would have been fine!
but unless some expert actually figures out your problem dont RUU!
i really wonder whats obstructing the boot loader access!??
please let me know if u can get your device back to normal!
Sonone said:
are you sure you did get the SUPER CID cause if its not then you can RUU your device!
cause if you are not SUPERCID get a matching RUU or a latest version meant for your device!
only if you could somehow manage your phone to get recognized by a PC etc then you could flash boot.img with some toolkit etc and everything would have been fine!
but unless some expert actually figures out your problem dont RUU!
i really wonder whats obstructing the boot loader access!??
please let me know if u can get your device back to normal!
Click to expand...
Click to collapse
I had to change the CID to unlock the bootloader on htc dev, its like 11111 so that is super CID right?
Yea I've tried everything to get to adb since I am familiar with adb but its a no go none of the tool kits or even manual cmd is recognizing the device.. I had a one x just like this before and never had the problem getting into bootloader so I don't really get what is blocking it. Only thing I had done was flash twrp recovery, wiped data/factory reset, system and cache, then flashed the rom as one usually would and gapps, just I had forgot about these phones needing you to flash the boot.img. that is all I did to it. Kinda sucks I just got this thing yesterday from a friend too.
Yes, 11111111 is SuperCID. In any case I probably wouldn't attempt an RUU while the phone is this unstable, could be quite dangerous. It's possible the "adb reboot bootloader" command might work if you catch it at the right time in the boot cycle.
Sent from my Evita
timmaaa said:
Yes, 11111111 is SuperCID. In any case I probably wouldn't attempt an RUU while the phone is this unstable, could be quite dangerous. It's possible the "adb reboot bootloader" command might work if you catch it at the right time in the boot cycle.
Sent from my Evita
Click to expand...
Click to collapse
Thanks bud, well I can't get it to catch even using super finger speed cmd'ing lol.. oh well.. I'm not gonna try anything else other than the usual ways to get into bootloader until someone else has some idea what might be blocking it from entering. Is there anyway to turn it off? its just restarting over and over with the bootloop. Or does one just let it go dead? I suppose worse case senario sending it for Jtag would fix it right? thanks again to the both of you.
I believe in the command window your can press the down key to give the previous command again, so if you hit down and enter one after the other (spamming it) you might have a chance. I'm really surprised that continually holding volume down during the loop process isn't getting you to bootloader, that's very strange. There's no way to turn it off. But, it usually burns through a fair bit of battery during a boot loop so you could wait for it to die completely, charge it for a couple of hours, and then try the volume down + power combination to get to the bootloader. I hope it works, let us know how you go.
Sent from my Evita
timmaaa said:
I believe in the command window your can press the down key to give the previous command again, so if you hit down and enter one after the other (spamming it) you might have a chance. I'm really surprised that continually holding volume down during the loop process isn't getting you to bootloader, that's very strange. There's no way to turn it off. But, it usually burns through a fair bit of battery during a boot loop so you could wait for it to die completely, charge it for a couple of hours, and then try the volume down + power combination to get to the bootloader. I hope it works, let us know how you go.
Sent from my Evita
Click to expand...
Click to collapse
Yes well on my laptop its the up key that's what I was doing was spamming, you can hear the connected device sound on then off, but it just doesn't see it. I will let you all know once its working again and what I did or had to do to get it back so that it may possibly help others that run into the same issue. If not I suppose I'll try to get it Jtagged, too nice of a phone to use as a paperweight really
Yeah sorry, I knew it was one of the arrow keys, kinda took a stab in the dark at that one :sly:
Sent from my Evita
Hold down the power button until the phone turns off. You'll see the buttons flash. This simulates a battery pull. Then wait a few secs then hold vol down and press power button for 2 secs while still holding vol down. Wait for bootloader
Sent from my VENOMized HoxL
You should hold volume down while holding power. Holding power alone just initiates a reboot, not a power down, so if you're not holding volume down at the same time when the reboot kicks in it'll just reboot as normal.
Sent from my Evita
timmaaa said:
You should hold volume down while holding power. Holding power alone just initiates a reboot, not a power down, so if you're not holding volume down at the same time when the reboot kicks in it'll just reboot as normal.
Sent from my Evita
Click to expand...
Click to collapse
Nothing is working guys :/ full Battery drain and everything it just keeps looping no matter what I do it will not go in bootloader :crying: thanks for trying to help
If you are trying while the phone is plugged into power it will not work.
The method I use is to hold power until the screen shuts off then I let go of power and hold volume down until the bootloader comes up.
Sent from my One Xl using xda app-developers app
exad said:
If you are trying while the phone is plugged into power it will not work.
The method I use is to hold power until the screen shuts off then I let go of power and hold volume down until the bootloader comes up.
Sent from my One Xl using xda app-developer app
Click to expand...
Click to collapse
Yes I don't have power plugged in, I've never had a problem like this. . I also don't even have to turn off the screen everytime it loops it goes off for a good 20 seconds or more. But I did try what you all said too and it seems there is not even an effect at all it just loops
YAY!! I was messing around and held volume up and volume down with power, and it put the phone into some kind of off/sleep mode, then it recognized the device in windows device manager and said device cannot start, so I tried uninstalling the driver and then refreshed to let it reinstall them and during the reinstall i tried running the adb command and it let me back into bootloader! woo! that was lucky.. hopefully this can be helpful to others that get stuck like that. I'm worried now though i have bootloader sitting pretty what should I do first? I'm scared to loop again thanks all.
sensei_777 said:
Yes I don't have power plugged in, I've never had a problem like this. . I also don't even have to turn off the screen everytime it loops it goes off for a good 20 seconds or more. But I did try what you all said too and it seems there is not even an effect at all it just loops
YAY!! I was messing around and held volume up and volume down with power, and it put the phone into some kind of off/sleep mode, then it recognized the device in windows device manager and said device cannot start, so I tried uninstalling the driver and then refreshed to let it reinstall them and during the reinstall i tried running the adb command and it let me back into bootloader! woo! that was lucky.. hopefully this can be helpful to others that get stuck like that. I'm worried now though i have bootloader sitting pretty what should I do first? I'm scared to loop again thanks all.
Click to expand...
Click to collapse
Just flashed the boot.img good to go now thanks for the advice everyone
Hey Guys,
so ive been messing around with this little phone and think i might have managed a hard brick. Any thoughts or advice would be appreciated.
was attempting to relock the bootloader and flashing my local 4.4.2 rom and on the command prompt when i reached flash system.img parsechunk lines, they failed. as it said permission denied.
Tried to continue with no luck. Restarted my phone and now cant get into recovery and no boot, the only screen i see is the white warning bootloader locked screen, get a vibrate and then it turns off again. Any ways to flash without Recovery or Fastboot or am i completely out of luck?
Sorry im new to motorolas, had no problems messing around with my old SGS2
Thanks in advance everybody.
did you try this ?
http://forum.xda-developers.com/showthread.php?t=2542219
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
mackb44 said:
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
Click to expand...
Click to collapse
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
jamsh said:
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
Click to expand...
Click to collapse
Yea tried both options, no luck!
The only screen i can get now is the bootloader unlocked screen or the white charging screen when plugged in. After that the screen will stay on but is completely black.
Success I can get into fastboot now!!!! not sure why i could not before
mackb44 said:
Success I can get into fastboot now!!!! not sure why i could not before
Click to expand...
Click to collapse
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
quizmaniac said:
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
Click to expand...
Click to collapse
Yea thanks buddy!
just have to wait for it to charge up before it will let me flash using adb, oddly its only showing that it is charging while plugged into usb and not the wall socket
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Does ADB recognize the device?
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Unplug your phone and hold volume up and power for 30
seconds. Do not have it plugged in while doing this.
Bierce22 said:
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators
Click to expand...
Click to collapse
Ok so thats good to know
DizDroid said:
Does ADB recognize the device?
Click to expand...
Click to collapse
No but i could be doing aomething wrong. Ill give it another go
piisceiss said:
No but i could be doing aomething wrong. Ill give it another go
Click to expand...
Click to collapse
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.
M9guy said:
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.
Click to expand...
Click to collapse
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset
piisceiss said:
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset
Click to expand...
Click to collapse
I would run the newest ruu that dottat has posted in the android development section for this phone, put it on your sd card using your computer, then put it back in your phone and boot to fastboot and let it pick it up and hit I believe it is yes and it will restore your phone. You are on 4.4.4 right ? If you are having problems getting to fastboot hold power and volume up until you see the lights change and or it vibrate then quickly switch to power and volume down and it should take you to fastboot, it may take you multiple tries to get it there. This sounds like the screen of death issues people have had on viperone which the fix for that so far has been to reverse the 4g handoff fix as most people that have the sod they had used the 4g handoff fix but if you cant get past the black screen then you cant do the fix for that. Have you tried leaving your phone sit for a while to see if it comes out of it ? Also most people only had that issue in weak signal areas so a good signal area could get your screen working again if you had done the 4g handoff fix. If you did some have said that the change can stick even through a ruu, but I cannot verify that either way.
Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please
rcbarrieault said:
Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please
Click to expand...
Click to collapse
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.
rcbarrieault said:
It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.
Click to expand...
Click to collapse
I will have to try this. What other things did you do?
Once I was back in recovery I reformatted before rebooting and then from recovery I installed the rom.
dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I did this and we're all fixed, thank you for all the replies
dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I agree with Dottat, faced the same issue when trying to flash ARHD 22.1 on my Verizon M8. I think I sprayed some **** in my pants with that loud fart .
After trying several times I got the trick and could get into Hboot. The issue I think was I was holding Power + Volume up & down for more than required time and it Rebooted. We need to Switch Off the device by Holding Power + Volume UP & Down button for about 8-10 secs and then just remove the finger from Volume UP button. It takes you to Hboot mode..