Wireless Tether - Mytouch/Windows - Android Apps and Games

Can someone give me directions on how to get Wireless Tether to work on my Mytouch and Windows 7 Home Premium? Here is what I'm doing and getting in response -
I downloaded Wireless Tether v1.6 and here's what I do. Turn on my computer Bluetooth. Turn on Wireless Tether, start tethering, go to setup, select use bluetooth. In phone settings, make bluetooth discoverable. On my computer, I go to Control Panel, add a Device, it finds it, then I hit next, and from there I try to connect to the Access Point of the phone but for some reason in there my phone (T-mobile Mytouch) just restarts.
Can you give any advice for why this is happening? Is there a step I am leaving out? Any help would be great!

Related

Problems with BT, AS, and WiFi while connected to 3G

I've been triying to figure this out for awhile but here's the basics of what's going on:
I have a Japanese HTC Touch Pro, (and yes EVERYTHING is in Japanese, but this doesn't really bother me.) We don't have MMS over here, so we use a constant 3G connection and mopera U to push email to the phone.
So, when i'm in my Comm Manager I have a Data connection on as well as the phone connection.
If I try to turn on my WiFi it will turn off after 3 seconds (just enables it and disables it)
If I try to use my bluetooth connection, same thing (enables BT, then turns it off again)
If I connect my phone to my PC via USB it will try to connect at first, but will suddenly disconnect after a few seconds.
Well, I figgured out that Active Sync won't allow the connection while the phone portion is turned on. Easy enough, I turn my phone into flight mode and it connects just fine and syncs. While this is a tad retarded, I will accept it.
However, In order to get bluetooth to work, i need to disable the 3G connection. Now.. here's what I don't like:
I *HAVE* to have my data connection for email/internet or anything. But, the phone will only seem to allow either the Data connection through the 3G OR bluetooth/wifi, not both.
Now, if I have BT enabled first, then try to establish the data connection I get an error telling me it cannot connect to the 3G network, same effect though, it will try.. just won't allow it.
What really makes me mad is i'm not wanting to have it networked to anything, I just wanna pair it with a headset so I can listen to the mp3 player while on the train and send out emails from my phone.
I tried calling HTC (good help that was) about it, and they suggested hard reseting the phone, soft reset, ect ect.. There's not really a problem, i'm sure there's just a setting somewhere to allow the multiple connections at one.
Does anyone know of any tricks or ANYTHING I can do so I can use my phone the way it was intended?
Did you ever find an answer to this? I am having a similar problem with my Fuze. When bluetooth is enabled, eventually the phone begins to refuse to open a data connection. :-(
No, i never found an answer. I'm not tech savvy enough to find it out.
But its REALLY annoying. I just want to use my USB headset, not connect bluetooth to any network or route messages that way.
Not sure if this is the fix to your problem, but this helped me when Wifi kept turning off, its a setting in WinMoDevCenter, it stops all data connections when connected to sync
in WinMoDevCentre go to Mobile Device settings -> Connection Settings -> Allow Data connections (last check box)
after that i was able to use wifi while plugged in just fine

Fresh 1.1 and wireless tethering not working at all...?

So this is the first time I am trying to use the wireless tether and it's not working at all.
I changed the ssid so that it's something that I can remember and be unique... I turn on wifi and mobile network... is that right?
Go back into the wireless tether program and push the tether button. It then takes me to the SU request screen and does nothing...
Normally when something needs root it pops up to allow access but it does nothing.. . Just wondering what am I doing wrong and why is this then turning off my wifi when I go back to check the widget it shows that the wifi is turned off?
Any help would be great.
Thanks,
-Nigel
as far as it not working I wish I could help but I do know that it turns the WiFi "off" so that it can use the mobile network as your internet. It is using the WiFi radio to broadcast so that the comp can pick it up and connect.

"Wireless Tether for Root Users" app won't stay connected

Does anyone else have this problem?
My laptop will stay connected for a maybe a minute at a time, sometimes just a few seconds and I have to reconnect. Under Wireless Network Connection, the network is listed as "On Demand", if that helps.
I've tried every version of "Wireless Tether for Root Users" I can find and they all have the same problem. Is there anyway to stay connected?
Is it possible that your computer won't let you connect to an Ad-hoc connection? Maybe as soon as it realizes what it's connecting to it jumps off?
Havent had a problem, are you using the administration portion of wireless thether, you might have to just confirm the connection on the phone and apply the settings, you should have a green sheild when on your phone when a allowed device is connected
As far as I know ad hoc networks are allowed, I am using windows xp.
I have access control on and my laptop is allowed and connects fine, it just will not stay connected.
I am using a Toshiba nb205 netbook with windows xp.
On the Choose a Wireless Network window, next to G1Tether it says "On Demand" instead of Manual or Automatic. I've never seen that before.
I'm using the internet fine, I just have to reconnect every 30 seconds or so. Perhaps my google skills are too weak, but I cannot find anything, any help is very much appreciated.
Can you connect to a wifi network from the phone and stay connected?
Can you connect to a wifi network from the laptop and stay conencted?
"On Demand" is normal for Ad-Hoc Networks.
I had the same problem after upgrading from fresh 1.0 to 1.1 w/ gk-31. I uninstalled wireless tether and reinstalled it from my mybackup pro app backup (the one I made before flashing the new Rom and kernel. Works just fine now.
If I'm not mistaken I believe flipz included a newer version of wireless tether, maybe the old one works better.
I just realized I assumed you are using freshrom...
Might try reinstalling it anyways, let us know how it works out.
Reinstalling didn't work. I'll try out some roms tonight and see if they work any better, thanks anyways
Old post I know, but just wanted to see if anyone had any more ideas here. I don't think it's an android app issue at all, but rather windows. I'll be cruising along the highway with a fine connection, but as soon as windows picks up a random access point, it will jump off my ad-hoc connection and try to connect to the other one. not cool.

[Q] Any tether options for non-rooted WiFi Xoom?

I'm running a WiFi Xoom that has not been rooted, and I wanted to see if there are any tethering options that don't require rooting. I'm not opposed to using a UWB cable if need be, although of course it would be nice not to if possible.
For now, my phone is a Verizon Touch Pro 2. My TP2 is unlocked and running Energy ROM, and I also have WMWiFiRouter installed. In the next few months I will likely upgrade to an Android-based phone, but for now I'm stuck with the TP2.
Is there any way to make this work? Also, I'm not necessarily opposed to rooting it. For whatever reason I was trying to avoid doing that, but I have to get this thing working with me cel.
Thanks in advance for any assistance!
I don't have mine rooted, and I have a HTC Hero (sprint) until the Nexus S 4G drops next Sunday.
I have WiFi tether, and use Bluetooth to connect and it works well for when I just wand to browse the internet/ CNN and check on work stuff.
Just to make sure I'm looking at the right program, is that Barnacle Wifi Tether? The one I had previously read about was Wireless Tether for Root Users, which is what stopped me in my tracks.
EDIT: I just looked at Barnacle Wifi Tether and it says root access is required... what program are you using?
::EDIT:: Your TP2 is rooted, right?
I use the program "Wireless Tether" on my HTC Hero.
http://android-wifi-tether.googlecode.com
When wanting to tether my Xoom to the phone for internet connection:
Upon first startup on the phone side...
Menu>Settings>Use Bluetooth & Discoverable both checked
Back
-Press to start tethering-
Phone may ask for Superuser Permissions
Bluetooth permission request> Yes
This makes the phone discoverable for 120 seconds in which time I am able to go to the Xoom and...
Settings>Wireless & networks> Bluetooth (check)> Bluetooth Settings (ensure bluetooth is turned on)
Find nearby devices (the phone) pair, and then after it has paired you should be able to connect and the devices are tethered.
The Xoom will now use the phone for an internet connection
aronslusa said:
::EDIT:: Your TP2 is rooted, right?
I use the program "Wireless Tether" on my HTC Hero.
http://android-wifi-tether.googlecode.com
When wanting to tether my Xoom to the phone for internet connection:
Upon first startup on the phone side...
Menu>Settings>Use Bluetooth & Discoverable both checked
Back
-Press to start tethering-
Phone may ask for Superuser Permissions
Bluetooth permission request> Yes
This makes the phone discoverable for 120 seconds in which time I am able to go to the Xoom and...
Settings>Wireless & networks> Bluetooth (check)> Bluetooth Settings (ensure bluetooth is turned on)
Find nearby devices (the phone) pair, and then after it has paired you should be able to connect and the devices are tethered.
The Xoom will now use the phone for an internet connection
Click to expand...
Click to collapse
Touch Pro 2 is a Windows Phone, not an Android phone, unless he has Android on it. But I don't keep up with TP2 development, so I don't know if it has an Android Port.
I know there are WM tethering options, but am not sure of Ad-Hoc vs Infrastructure
Correct, the TP2 is Windows Mobile (6.5.x). It is unlocked, and I have a couple different internet sharing programs on it (HTC's version, and WMWiFi Router). They both work perfect when I tether my laptop to the TP2.
As far as I can tell, both of these internet sharing options on the TP2 do so in Ad-Hoc mode, NOT infrastructure mode, which is where my issue is. I haven't been able to find any program that can share in infrastructure mode, though I don't even know if that's possible.
I have tried the bluetooth sharing once before as I know the cell phone (allegedly) has the capability, but I couldn't get it to work. Wasn't sure if the problem was on the phone's end or the Xoom's end. I'll try these steps during lunch and see if I can get it to work.
Okay, tried the steps you gave me and here's exactly what happens:
I made both devices discoverable and paired them successfully. Went into the Bluetooth manager on the TP2 and tried to create a Private Network. I chose the Xoom, it said 'Checking Services' for a little while, and then said 'Failed to establish Private Network connection to remote device as it supports only Network Access Point (NAP) mode.
There's also a different option for "Share Internet Connection". I again chose the Xoom and got the exact same message.
Where is the disconnect here? Does my TP2 not support the right protocol, or is there something at fault on the Xoom's end? I tried Bluetooth Settings on the Xoom, and then I tapped the wrench icon, but all I can do in there is rename or unpair. It also says paired but not connected. I've never been able to get it to say anything other than that, also.
One more last part... when my TP2 examines the Xoom, the only available services that it can find are 'Access Internet through remote device'. So, of course the one thing that appears to be able to work is the exact opposite.
As always, any ideas or suggestions would be greatly appreciated. Thanks!
schick79 said:
One more last part... when my TP2 examines the Xoom, the only available services that it can find are 'Access Internet through remote device'. So, of course the one thing that appears to be able to work is the exact opposite.
Click to expand...
Click to collapse
The Xoom supports the Bluetooth PAN profile as a user, but it seems like your TP2 isn't seeing that. Is there any way you can setup your TP2 to act as a Bluetooth Network Access Point awaiting incoming connections? This is the way a lot of us tether or Xoom's to OG Droids, where we start up Wireless Tether on the Droid, THEN pair, then the Xoom shows a Tether option in the Bluetooth settings.
I have a TP1 running MightyROM laying around somewhere, I can mess with it later tonight if you haven't got a solution by then.
EDIT: Another option is rooting your Xoom and trying the Adhoc WiFi hack. Not everyone is having great success with it, though.
I've gone through every single menu on here and I can't find any other way to do this in Bluetooth other than the way I'm doing it. It just might be how this works. I haven't upgraded ROM's on the TP2 in a very long time. I'm probably running about a 6 month old version of Energy ROM.
I should probably just break down and root the damn thing... I suppose that would solve it.
If you've absolutely nothing else to do tonight and want to try it out, I really would appreciate it! If I have some major breakthrough between now and then, I'll reply. Thanks!
yeah im having problems with this too im using an eris (same as the hero) but for some reason my phone reboots when its connected to my xoom, and i have tried just about every rom for the eris and have no clue what it is.
schick79 said:
If you've absolutely nothing else to do tonight and want to try it out, I really would appreciate it!
Click to expand...
Click to collapse
I caught a break and found my Touch Pro. Forgot that I reflashed it to stock (it's a Sprint TP which I was running on Verizon), so I won't be able to easily get it on the mobile network for thorough testing.
I did manage to get my Xoom to pair with the device, and the Tethering option shows up on the Xoom; however, I can't get Internet Sharing started up on my TP without being on the mobile network (WiFi alone isn't helping). When I do tap the Tethering option on the Xoom, it attempts to connect, then reverts to its untethered state without an error message (been there before, had to comb through hcidump to figure out what was going on).
Since it seems I *almost* got there, I'm going to ask you to try out a verbose (not to be insulting, but just to cover the bases), step-by-step procedure, and to let me know your feedback. Note that I'm running stock WinMo 6.1, so locations and dialogs may be different than what I describe. Please give this a shot:
Delete all pairing entries from both TP2 and Xoom
TP2: Start | Settings | Connections | Bluetooth | Mode
TP2: Check "Make this device visible to other devices"
TP2: Tap Ok | Tap "X" (Close Settings)
TP2: Start | Programs | Internet Sharing
TP2: Under "PC Connection:", select "Bluetooth PAN"
TP2: Tap "Connect"
If the connection succeeds, then you can proceed to the following. If not, some searching may yield some registry keys or other hacks to make this work. Note also that there may be an extra dialog or two to get Internet Sharing completely setup, as I was unable to get that far.
.
XOOM: Settings | Wireless & networks | Bluetooth settings | Tap "Find nearby devices"
XOOM: After a few seconds, your TP2 should appear (my TP showed up as "Pocket_PC"); tap it to pair
XOOM: On the "Bluetooth pairing request" dialog, enter "1234" (without the quotes)
TP2: A "Bluetooth" dialog should pop up asking if you want to connect; tap "Yes"
TP2: On the "Enter Passcode" dialog, enter "1234" (without the quotes) and tap "Next"
TP2: A "Device Added" dialog should appear; tap "Done" (pairing is complete)
XOOM: Tap the wrench icon next to your TP2 under "Paired devices"
XOOM: Tap the "Tethering" option under "Profiles" to enable tethering
Cross your fingers, pray, perform incantations, etc...
I've tethered my unrooted Wifi Xoom to my Omnia II (Verizon WinMo 6.5) using WMWifirouter via the Bluetooth connection. I paired them once, fired up the WMWifiRouter BT connection and the Xoom connected right to it. The BT connection actually isn't too bad, not the fastest but gets the job done.
Let me know if I can help, don't have my Xoom with me here at work to confirm any settings but can follow up this weekend.
stachre: I didn't even have the BT PAN as an option using that method. Have a feeling it's a phone issue from the brief reading I've done. Apparently TP2's don't have a Microsoft BT stack, they have a Widcomm stack. Supposedly it doesn't play nicely with others.
stachre and 2ksilverbullet: I have never been able to get WMWiFiRouter to even try to use the Cellular to BT connection. I finally read somewhere that people were able to make an older version work. I downloaded and installed it, and it at least now lets me try and use it, although it won't work. Still can't get the Internet Sharing to show a BT option. All of the same still applies from before: same error messages when trying to establish a PAN connection, Xoom still doesn't display a tether option, nothign has changed.
I really appreciate all your attempts to help out. Right now I'm just feeling like it's not worth any more effort from anyone, espcially others. Thanks again for everything. If for some reason you're absolutely determined to try and figure this out, please feel free. Otherwise, I'm inclined to throw in the towel and just wait until I upgrade to a new phone very soon.
Cheers!
I use my iphone with built-in tether no additional software on either
I tether my non-root zoom wifi version with my dell streak running android 2.2.2 on Tmobile edge, speed is absolutely acceptable for surfing web. Set up for tether is pretty easy.

Connect wifi xoom through tethering from Galaxy S phone?

Just curious as to whats required to be able to have my xoom see my phone and connect to it. I looked for a forum for it and instructions but wasnt able to find anything.
The easiest way is to open you phone settings, go to Wireless and Network and then Mobile AP.
This will activate your phone as a Mobile Access Point and share it's connection via Wireless.
Now open up your tablets settings and search for the wireless network (usually called 'Android...'), connect to it and your all set.
I'm not a big techy but I hope it helps.

Categories

Resources