Does anyone know how to do this? One time I had a HTC app which launched a thing to ask what kind of connection you wanted to the PC when you connected by USB (ActiveSync, Storage Device or Internet Sharing). It would be nice if there was a silent app which used this monitoring principal to close ActiveSync when the USB is disconnected. It just takes too much battery power if you forget to close it.
Anyone know if there is such a thing?
Thanks
Related
Hello,
I was wondering if any one out there could help with this problem, i had a quick search on google and on this forum but to no avail albeit I'm not very good at searching.
When I'm at work (like now) I always have my HTC TYTN checking for new e-mails every 10mins or so... it's very important for me. I always bring my USB charger because this tends to drain the battery a lot.
The problem is when I connect with active sync my phone will not connect my tmobile internet thus it stops receiving emails and won't connect to the internet, only when i unplug my device from the PC it will, I was wondering if anyone else experienced this same problem?? I've played around with a few settings but nothing seems to be working.
Any help will be much appreciated
Goto file/Connection Settings/ click on "Allow wireless connection on device when connected to desktop"/ Click "OK"
For good measures if you are connected, unplug your ppc, close Active Sync, plug back in.
Hi, thank you for your suggestion...
I tried the following but unfortunately it didn't solve my problem
Fresh Start
You may also try deleating your device from Active Sync and then re-establiahing the connection with the above settings. Soft reset your divice at the same time.
Ahh no luck I'm afraid...
I've tried playing around with it afterwards but still to no avail, maybe it just doesn't like my work PC...
It can connect to the mobile internet, however it doesn't want to use that internet to cehck for email even after i set my e-mail to specifically only check for e-mail from my mobile connection, as soon as i unplug the USB cable i can connect no problems...
Thank you for your suggestions.
I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?
Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.
Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.
Try a different USB port
Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.
coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!
Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that
When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.
I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...
really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync
internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.
This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.
try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.
Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!
yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!
I've successfully gotten the Pandora app to work great on my HTC Touch Pro 2 phone (WinMo 6.5) following advice from another thread here, and have a device adapter for my larger computer speakers...it sounds great! Thanks!!
However...whenever I'm listening (at work) and connect the phone to my computer (via USB), Pandora stops working! In the Microsoft ActiveSync Connection Settings, I even have "allow wireless connection to device when connected to the desktop" selected, but selected or not, it still stops playing when I connect it to my computer. (I want to keep it connected so the battery stays charged).
So basically, I want to listen to Pandora thru my phone and keep it charging at the same time. (It charges as it's connected thru USB. I can't listen to Pandora thru my work computer, cuz it's blocked by a Barracuda filter.) Is it somehow reading my phone as an extra drive? If so, is there a way to turn this on and off as needed?
Any clues on how to fix this? Keep it simple, cuz I am a newbie when it comes to messing with this stuff.
Thanx!
(sorry if this question has been posted before...I couldn't find anything on it...)
I am looking for a tweak\tool\registry hack (if possible) to have a Charge Only Mode for Windows Mobile 6.5 if at all it is possible. Most of the times, I am at office using my HD2 (Dual boot with 6.5 and DarkStone Android ) connected to the Laptop and it would be great if I can just connect it to my laptop without choosing either of the three options
1. ActiveSync
2. USB Storage Mode
3. Internet Sharing
P.S : I did lot of search for this option but was unable to find it and hence started this thread...but I will be more than happy if anyone can redirect me to an existing thread if any, for the same issue.
When your phone is charging off the laptop do you actually use any apps on it?
I'm like you in that I spend 2 days a week with my phone charging from the laptop, but I never use it for anything other than phone calls, so selecting disk drive does the job for me.
Any apps I'd need, I'd make sure were installed on the device.
bamit99 said:
I am looking for a tweak\tool\registry hack (if possible) to have a Charge Only Mode for Windows Mobile 6.5 if at all it is possible. Most of the times, I am at office using my HD2 (Dual boot with 6.5 and DarkStone Android ) connected to the Laptop and it would be great if I can just connect it to my laptop without choosing either of the three options
1. ActiveSync
2. USB Storage Mode
3. Internet Sharing
P.S : I did lot of search for this option but was unable to find it and hence started this thread...but I will be more than happy if anyone can redirect me to an existing thread if any, for the same issue.
Click to expand...
Click to collapse
Better use the active sync or the mass storage mode..As it is you wont be needing to install apps on your memory card thanks to the massive storage of the HD2 compared to the older WM devices...This shouldn't be a problem IMHO...
Cheers.
Ive got a really easy fix for this, just use a different cable, you can get cables or adaptors that will charge only and wont sync. When you want to sync just change the cable or take off the adaptor.
btw... such an adaptor is only £2.50 from amazon for my phone
bamit99 said:
...it would be great if I can just connect it to my laptop without choosing either of the three options
1. ActiveSync
2. USB Storage Mode
3. Internet Sharing
Click to expand...
Click to collapse
This doesn't stop the action as such, but when you connect your phone to PC, with the 3 options you listed, there should be a a check box at the bottom "Don't ask me again", so whatever you choose will automatically happen next time (choosing USB storage will therefore not ativate ActiveSync/Device Centre on your PC. This can also be found under Settings->Other (miscellaneous settings)->USB to PC (see attachment).
Or, just use a wall socket charger?
Hi,
Thanks for your replies ! The reason I asked this question is because I do not have a Data Plan on Phone. I only use Wifi at home and office and Active Sync kills it. Data storage mode won't let me use the Storage which I kinda need (Don't ask me why? ) and ofcourse Internet sharing Mode just sends the phone into a crazy 'Connecting 3G Network'...loop.
Anyways, I think using the Charge Only Cable should do the trick for now..But I still feel that this mode will be helpful for few rares like me...Love tis mode in Android.
bamit99 said:
Hi,
Thanks for your replies ! The reason I asked this question is because I do not have a Data Plan on Phone. I only use Wifi at home and office and Active Sync kills it. Data storage mode won't let me use the Storage which I kinda need (Don't ask me why? ) and ofcourse Internet sharing Mode just sends the phone into a crazy 'Connecting 3G Network'...loop.
Anyways, I think using the Charge Only Cable should do the trick for now..But I still feel that this mode will be helpful for few rares like me...Love tis mode in Android.
Click to expand...
Click to collapse
ActiveSync does not kill my Wifi - make sure the 'Allow wireless connections on device...' is checked under File->Connections Settings. Also ActiveSync should allow your phone to use your PC's internet connection (pass through) anyway.
The other thing to try is to delete the mobile device from within ActiveSsync as if you've never synced it before and when you next connect it it will ask you to set up a relationship but click cancel and - viola - should now just charge.
agrickard said:
ActiveSync does not kill my Wifi - make sure the 'Allow wireless connections on device...' is checked under File->Connections Settings. Also ActiveSync should allow your phone to use your PC's internet connection (pass through) anyway.
The other thing to try is to delete the mobile device from within ActiveSsync as if you've never synced it before and when you next connect it it will ask you to set up a relationship but click cancel and - viola - should now just charge.
Click to expand...
Click to collapse
No "Allow Wireless Connection on Device" option. I am using Windows 7.. Not sure if it is present in WMDC.
ActiveSync Passthrough does not work..I am on a encrypted network with authentication based Proxies..whole bunch of them.....
I do not want to kill the ActiveSync relationship since it syncs everything with my PC.
I think I am bothering a lot over this stupid requirement.. so I will just close this thread (If I can) but if I find anything I will post it here, for someone else who might be in similar situation.
Thanks anyways...XDA rocks !!!
Similar issue like mine
--------------------
http://www.modaco.com/content/pocke...ync-connection-blocking-wireless-connections/
Hi all,
I apologise in advance if this has been answered somewhere here before, but I couldn't find anything on Google or using the forum search.
Background:
I usually have USB connection set to Media device (MTP) and this works for 99% of devices. The one thing that's causing me issues is the USB connection on a Hyundai i30. As soon as it is connected, it starts to scan for music to play. However after approx 5 seconds the connection drops, then it attempts to reconnect again. This causes the radio to toggle off in the car repeatedly each time it tries to reconnect and worse, ends up draining the battery on the N5 instead of charging it.
Current Workaround:
I've been able to avoid the issue by deselecting both MTP and PTP in the USB connection settings which allows the phone to charge properly.
TL/DR - Hoping for an easier way to change USB mode:
Does anyone know of any widget that exists that can toggle this from the homescreen? It's a pain to have to go all the way to USB connection each time I have to get in the car, then to remember to change it again next time I'm using anything else. Bootloader unlocked and rooted BTW.