Database Info

urgent help needed

hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance

You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry

you mean to say its over ?????????????
there should be any way

You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...

wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2

that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.

please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.

Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.

ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER

how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows

there must b some way to overcome this problem

jesterz's gold card isn't working yet, and for now it's only for G3...

My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks

have u tried holding the camera button while softreset and then flash rom again

Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use

i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !

ROM Update Problem

I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help

You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.

Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help

Hmm, can u fully upgrade your rom ?

Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo

I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.

Please HELP ME I cant flash anything SPL-1.82.0000

PLEASE HELP ME with no conection and no flash by SD only LOADING
Hello,
please I try to find sometnig but nothing work for me.
Please my issue is that USB not working and I can´t flash by SDcard.
first my device info in boot loader:
KAIS130
SPL-1.82.0000
CPLD-8
and USB is not charging and working, I can´t connect it to PC, nothing do it, when I connect, no "tada sound" nothing, on boot loader show "Serial"
and it charge only when is PDA power off, than normaly charge but light only red LED.
And second when I try to flash with really many ROMS and types of HardSPL and Radio, or NBH from originally shipped roms it only show "Loading" and than stuck.
Please I dont know what is it, it is really strange.
I cant sent it to warranty because is second hand phone.
PLEASE HELP ME before I am going crazy, because I dont sleep next day, only trying new ROMs by KAISIMG.NBH on SD card (it is formated to FAT32) and on my friends pda was working KAISDIAG.NBH and others.
PLEASE HELP ME

Hello,
please I try to find sometnig but nothing work for me.
Please I can´t flash by USB or SDcard.
first my device info in boot loader:
KAIS130
SPL-1.82.0000
CPLD-8
And second when I try to flash with really many ROMS and types of HardSPL and Radio, or NBH from originally shipped roms by USB stuck at 0% and by SD it only show "Loading" and than stuck.
PLEASE HELP ME before I am going crazy, because I dont sleep next day, only trying new ROMs by KAISIMG.NBH on SD card (it is formated to FAT32) and on my friends pda was working KAISDIAG.NBH and others.
PLEASE HELP ME

jozinecko said:
Hello,
please I try to find sometnig but nothing work for me.
Please I can´t flash by USB or SDcard.
first my device info in boot loader:
KAIS130
SPL-1.82.0000
CPLD-8
And second when I try to flash with really many ROMS and types of HardSPL and Radio, or NBH from originally shipped roms by USB stuck at 0% and by SD it only show "Loading" and than stuck.
PLEASE HELP ME before I am going crazy, because I dont sleep next day, only trying new ROMs by KAISIMG.NBH on SD card (it is formated to FAT32) and on my friends pda was working KAISDIAG.NBH and others.
PLEASE HELP ME
Click to expand...
Click to collapse
Flash back your OEM HTC kaiser ROM. After you get it your phone working again, and if you want to dive into the flashing world, then you must read all about flashing new ROMs. But as a hint, start by knowing you must unlock your Device CID before the device will accept SPL or cooked ROM flashes. Read about this subject as well.

I can´t flash by HardSPL by USb or SD.
That kaiser unlock not working for me, and when I use SDA_ApplicationUnlock it show me that phone is "unlockable" and Kaiser unlock stuck only at 0% when try flash HardSPL and unlocked radio is same problem stuck at 0% I try that dont touch phone and only replug cable and start hardspl or radio again and than show me dont recognize USB.
I really dont know how I can unlock it.

You really need to find your way to the HardSPL thread and ask your questions there.
This thread has been deemed redundant therefore it is denied life!

[Q] HTC Desire problem!

Hey there guys, dont know if someone could help me with the mess ive done but i'll give it a shot.
So.. i had my desire working fine but i wanted to change rom... so i did but as a noob i havent read first the Noobs desire guide... :/
I managed to route my desire with the reflash_package but I didnt "S-OFF" my device and i didnt partition my sdcard.
Then I copied a ROM (InsertCoin_GB_Sense2.1_A2SD+_1.0.8) on my sdcard and used the bootloader to flash it. When the flashing was done i rebooted but the device is full of problems. I guess its because i didnt S-OFF my device and didnt partition my sdcard either.
So i followed LINKSLOVESANDROID steps for S-OFF but i just couldnt get through with it. i booted with alpharev that i downloaded and burned onto a cd. step 1 of the process goes ok but there was no question from superuser access to accept anything, then at step 2 while it says Dozing off for a minute... a msg is displayed that there was an error with the usb hub connection.... then step 3 begins and then the same error for the usb hub connection comes back and then the process stops with the phone working.
I tried flashing from windows with an RUU stock rom but i get an error 140 bootloader version error. my image version is 2.36.405.8.
So does anyone know what should i do? Throw it in the ocean? Im desperate!!!

Please help:bootloop Iget Blackview a7 (eu gold version)

Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool