Database Info

Problem with awizard. Please help my device is DEAD

how can I use awizard if I cant turn on my device?
I can only get to Bootloader and when I try to press U in awizard I get a popup window saying my device is not connected.
when I confirm this popup (twice) the dos window state that it is initializing and says not to remove my device from the USB and it get stuck for at least 20 minutes
I cant turn on my device so Im trying to flash some other ROMs (like imate's) but cant do that because of ID issues.
What can I do? I am fraustrated, please help, my device is dead.
Thanks

Hi,
If you device is stuck on bootloader, then you should update it with a no vendor ID rom like the one there are on the FTP ftp://xda:[email protected]/ /Prophet/Shipped_Complete_Updates/
section.
The Dopod one come with no vendor ID, but if you do so, you won't be able to change rom later.
If you have another rom you would like to use, then you should download the file ROMUpdateUtility-NoVendorID.zip in /Prophet/Tools/.
Connect your phone on usb when stuck on bootloader, extract the files of your Update Utilies (RUU ...) and change the executable with the no vendor one. You may have to copy the nbf (or something) file into the same directory as the executable.
Launch it and see if it works.
if it doesn't work then download the no vendir ID dopod rom and run the RUU, it will work but as I said, no turning back for now.
good luck :wink:

Thank you for your answer.
I have tried using this ROMUpdateUtility and it started flashing the rom, but when it got to 95% it said:
Error [326]: INVALID COMMAND
This NBF file cannot be used for your PDA phone. Please check your NBF file.

HELP
anything im trying to do, I still get this black screen with version numbers.
What is wrong?
It not that I have played with the device, it just happened. since then I am trying to flash different ROMs with no success.
Please HELP.

I guess your prophet IPL and SPL is 2.15.xxxx
If yes, the only rom you can is Dopod newest rom.

Please, please, please, please help me.
I have HTC charmer and unfortunately put an dopod latest rom in it & now I am stuck in bootloader mode.
Please tell me & help me as I tried many roms but with no success.
I want to revert back to MDA Compact II rom.
Please Help.
SPL is 2.15

urgent help needed

hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance

You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry

you mean to say its over ?????????????
there should be any way

You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...

wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2

that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.

please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.

Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.

ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER

how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows

there must b some way to overcome this problem

jesterz's gold card isn't working yet, and for now it's only for G3...

My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks

have u tried holding the camera button while softreset and then flash rom again

Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use

i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !

creating a sd backup card without connection to the computer

hi,
so unfortunately all the threads and tutorials i found about that were something with mtty and
stuff where you had to connecte the device actually to the computer. My problem is that the
only way my device stays in bootloader mode is if it is plugged in to the regular charger.
On the usb connect device it just flashes and turnes off after a couple of seconds.
So if I could write a backup onto the sdcard I could reload it from the bootloader.
Something like they have for the hermes where you copy the file on the sd card.
The only thing is that I can't connect the device to the computer, I have a cardreader though.
Cid stuff is no problem. I'm not sure if theres a way with pdswrite but all I see starts with
close wcseee....exe so active sync connection is closed but I want to get the backuprom
from the computer onto the sd card. So does anybody know a way for that?
thanks,
cr0ssy (and i'm not a pro so I can figure things out but I don't exactly get
through the instructions for pdsread for example and I don't know how to use perl.)

sounds like your battery is dead, thats why you need your charger.
anyway, on the ftp site under my name there is an SD image which you can write to an sd card, however its for a G3
let me know if you have a G4, i can make a dump for you.

I need a Dump for G4
I have a Prophet G4, with the same problem, can you help me? Can yuo put a dump in ftp of G4-rom?
Thanks,

jesterz goldcard?
Jesterz said:
anyway, on the ftp site under my name there is an SD image which you can write to an sd card, however its for a G3
let me know if you have a G4, i can make a dump for you.
Click to expand...
Click to collapse
Hi Jesterz,
can upload a G4 version, 'because I seem to have ruined my first G4...
TIA

I have a g4 version, too
thanks for your help man
yeah but the battery itself can't be dead can it? I mean its probably about the driver...and i have the charger thats how i can get permanent into the bootloader mode I thought its probably more about the driver. Its weird though that the wizard crossbow rom works for some people and some people not.
anyways I have a vodafone vpa compact s with g4 and it bricked my phone for now... ^^
naah actually if it would have no connection to the battery it wouldn't start at all without recharger and it starts it just turns off after a couple of seconds so its more like very low battery... but without the battery it doesn't blink at all^^

G4 dump
i did not no there was a g4 rom dump allready. Where is the link

g4 dump
yeah where is the g4 image dump we all are waiting for this

G4 dump
i did not no there was a g4 rom dump allready. Where is the link

Any news about a dump for a G4 Prophet? It would be better if I have such a dump so that I can test a WM6 rom without getting panic that it can failed and my new XDA Neo is dead!

guys , i have the same prob as u , can only connect to bootloader using mains charger, otherwise it will just hang and flash blue/orange led. You have to use the '2 wire charger solution' posted in this forum, http://forum.xda-developers.com/showthread.php?t=292667 . It helped me unbricked my 818pro! Although i can now boot into my newly flashed os, but i will still encounter hang (blue/orange flashing led and blank screen) whenever i try to soft reset thru usb power. I will need to connect to mains charger in order to soft reset and boot into the system!
Try it and let me know if u encounter the soft reset problem too.

Qtek S200 G3, flashed with G4 , please heelp!

So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes

noonas said:
So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes
Click to expand...
Click to collapse
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.

noonas said:
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.
Click to expand...
Click to collapse
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?

noonas said:
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?
Click to expand...
Click to collapse
Not ready to give up on this , please someone please...

puhleeze? Helehehehellp me?!

noonas said:
puhleeze? Helehehehellp me?!
Click to expand...
Click to collapse
Echo,,, echo echo echo.. hello, hello hello....

you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)

marar said:
you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)
Click to expand...
Click to collapse
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.

noonas said:
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.
Click to expand...
Click to collapse
So I downloaded Prophet Shadow 2.0 rom and ran the G4 upgrade RUU.
During the flashing progress the Bar on the Phone whent RED a couple of times, it eventually went to 100% (being red for about a minute), once the flash completed the phone rebooted in to the sam old tri-color screen again,.
What do to now??

*bricked*
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..

marekPLPH said:
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..
Click to expand...
Click to collapse
Downloaded the Prophet's 2.20.7.34_2.20_7114_02.69.21 Rom
Launched the G4 RUU, and I get Error 260 Update Error ;(
/Jonas
*EDIT*
Bad USB Cable (Oups), I flashed the G4 completely (again the progress bar on the phone goes red at times and then green again) once completed it reboots to the same BootSplash (Tri-color) screen without any difference.
/Jonas

did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...

marekPLPH said:
did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...
Click to expand...
Click to collapse
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.

noonas said:
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.
Click to expand...
Click to collapse
Status report.
Downloaded the file as referred to in the post.
Once I run it, it stops at 80% RED bar on the phone.
On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
What now?

goja67 said:
Download Prophet_PV_Temp and you will fiks it.
Click to expand...
Click to collapse
Thanks for the tip, I downloaded this ROM, ran the G4 RUU file.
It went through (again with a red bar at times on the device).
The PC said it all went successfully, and the phone reboots to tri-color screen again, SPL and IPL still the same.. DAMN!!
Any other suggestions or should I just declare it bricked?

If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .

thangkls said:
If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .
Click to expand...
Click to collapse
About 80% in I get "INAVLID COMMAND"

Hi,
I have the same problem. My imate was G3 ( I learn it after appyling the G4 batch ) I need to recover process and files from G4 to G3. I tried to recover by RUU_Prophet_220734_2207114_024721_NVID.exe (novendor)
But, On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
Do you have any solutiun or idea???

Hi guys...
Well Here's my story....
I was an Universal guy for about 5 years, and now I find myself stuck with a Prophet....
Don't take me wrong, I realy loved my Uni, and the prophet seems a good phone...
So after using it for a few days, I came back to this forum, and entered the prophet world...
Without spending the minimum time needed to search and learn how to properly upgrade the phone, or even tp know if it was a G3 or G4, I downloaded and flashed my prophet with a new ROM...
All went fine, and I got stuck in the bootloader screen, for about an hour... Then I finally found out how to properly HardReset the device, and now....
Well,... now I'm stuck in the splash "Inovation" screen and nomatter what I do, I just can't enter the bootloader....
After readding a bit...yah I know I should have done that before, and not after... I realize that my battery may be the culprit for not entering bootloader and so I plugged it in to the wall charger...NO charging light came on...
I know I don't need to write the next few words, but here they go...
HELP!!! PLEASE!!!
EDIT:
I needed the SIM card in my prophet, so I took it out, and also took the SD card...
Then I decided to re-try entering the bootloader...and....SUCCESS!!!
Now doing the RIGHT procedures to upgrade my prophet...

[Q] verizon tp2 stuck in bootloader(RUUNBH) Ps.(freaking out)

hello..
so for two days now i've been phoneless.
and ahh that suckz a bunch...
my TP2 goes right to bootlader and i see RUUNBH upper right!
my SPL is 1.00 hard
CPLD-8
I would flash my stock rom BUT i cant get a usb connection to work at all!
mtty doen't work at all!
hmm?!?!?!??
cdma unlocked
had M.x Rom running on here
HELP, please!
i would like to flash through sd card but i don't know how..
plse plse save my life b4 i jump of a cliff
seeing as i jus got this phone a week ago..
Thanks

Just copy the .nbh file to the root of your sd card, then rename it to RHODIMG.NBH. When you restart the device and it enters bootloader it should prompt you to update; just follow the prompts.