i have a htc s 710 and in the last time is restarting and crashing frequently by it self.
what can i do to fix the problem? there are some updates of rom and radio????
thx Enrico
First remove sd and sim card and see if that helps.
If not, then prolly a hard reset will fix it.
Hard reset: press and hold left and right softkeys and power on device, press send to confirm hard reset.
but if i would like to update it?
Tranego said:
but if i would like to update it?
Click to expand...
Click to collapse
Always make sure that you don't have any reference on your homescreen to any application installed on SD card, including MRU plug-ins which may point to any recently opened app in the SD card. This is a known bug for Vox.
I am not sure whether the same is fixed in recently released ROMs. But it is advisable to follow this practise. I had faced this problem in the past. Ever since, I never had any plug-ins on my home screen which points to an application in the SD card. And never had this problem again.
For the time being, it is always better to do a hard-reset. How muchever you try with other options, the issue might resurface again. Once the hard reset is done, follow the above practise. And you will never face the issue again.
ok i'll try!!
thx again
Hi,
My Vox is in an endless reboot cycle. I boots and after the Home screen displayed for about 30 secnds, it shuts itself down, as if the power-off button had been pressed, and then goes dead. Then, after about as minute, it goes on, and reboots without me having touched it.
I've removed the SD and SIM cards, and get the same result.
Needless to say, I cannot connect to it with Activesync.
I'm running the latest WM 6.1 available on this forum.
Can anyone afooer some advice on how to fix this problem?
Thanks
have u instaled smarttoolkit rc09? if yes, then remove it.
I too had the same experience with the software. instead,install the RC08.
If u have not installed the above software, then try removing the microSD card and boot. it shud work.
Cheers,
Akshay
Looks like hard reset is the only option you are left with, But be warned that you will loose all your data (on the phone), sim card is not touched. Regarding howto hard reset, please see the wiki
Plazmaboy said:
Hi,
My Vox is in an endless reboot cycle. I boots and after the Home screen displayed for about 30 secnds, it shuts itself down, as if the power-off button had been pressed, and then goes dead. Then, after about as minute, it goes on, and reboots without me having touched it.
I've removed the SD and SIM cards, and get the same result.
Needless to say, I cannot connect to it with Activesync.
I'm running the latest WM 6.1 available on this forum.
Can anyone afooer some advice on how to fix this problem?
Thanks
Click to expand...
Click to collapse
just remove the battery and then remove the sd card. reinsert battery and reboot now. it should work. if u have smart toolkit 09,remove it. another program this causes this feedback loop is photocontacts pro. what software do u have running? if nothing else works, try a hard reset. sincerely hope u have synchronized ur data already. else u will lose t fully.
you can also pull the simcard, this will switch off the vox.
With me this worked: after restart the problem was gone.
Hi all,
Perhpas this has been answered before, but I couldn´t find any related thread.
My Rapahel is turned on but can´t see anything on the screen! is totally black.
I know it´s turned on because I can up or down the volume key and I hear the sound and feel the vibrate.
Yesterday was ok, nothing new installed but today I just pressed the power button and nothing!!
This happened me before on Universal, problem was that in some way the phone change itself the brightness to cero.
If I conect to wall charger nothing happens also, not any sign that device is charging.
But still can see something. Now on my Rapahel I cant see anything?
Any help would be much than apreciated please!!
Thanks,
I would
1 softreset
2 hardreset
3 rma
Rudegar said:
I would
1 softreset
2 hardreset
3 rma
Click to expand...
Click to collapse
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Hey masters!
A light would be great here!
Sorry to insist!
orb3000 said:
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Click to expand...
Click to collapse
Not a master, but still try to help:
What happend during the soft or hardreset, is the screen showing during the booting ?
How did u do the hardreset, by holding keys ?
After the hardreset u have to get the screen aligned how did u get after that point ?
Help!
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
orb3000 said:
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
Click to expand...
Click to collapse
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.
1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Hard reset (option 3)
1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)
1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)
Click to expand...
Click to collapse
Ok this is out of the wiki, u see that all methods let u press the vol up button to really start the hard reset than. So on either method do the key presses, wait a while and then press the vol up to start the process.
Its a little try and error because u are not seeing the the actual message to press the vol up. but mybe thats worth to try until u get the point. I think option 3 is a good and easy one.
hopefully the hardreset works, maybe u can try to take a torch or bright sun light to get the display information, if the display itself is not broke u should see a slight shadow of what is written on the display. I had that problem with my wifes phone once and the information was the but its not a reflective display so it was very faint to see.
Finally tho, if all that fails:
RMA = Return merchandise authorization
It means a warrenty return.
It sounds to me like the lcd has croaked. If you dont have suitable warrenty / insurance i'd suggest ebay! i've just found a screen & digitiser for less than £25 (thats for a Raph 100, i honestly dont know if parts are the same on different raph models but i suspect they are)
Good luck!
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
orb3000 said:
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
Click to expand...
Click to collapse
Sorry to hear that nothing worked.
Not shure but if the phone fails to hard reset it is not only the screen that is broken ! Take this into account, do u still have warranty, maybe it is better so exchange the whole phone.
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
orb3000 said:
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
Click to expand...
Click to collapse
Dont give up, hope that I not get on ur nerves. But still I think a hard reset must be possible.
When u turn ur device of how do you do that ? When u turn it OFF with the power button you have to answer a question on the screen, u do not see the question but is the touchscreen working or how do you know where the YES/NO field is ??
So another way is take the batt out, and when u insert the batt than turn it on with one of the mentioned hardreset procedures.
There is than a question also but this is answered with the Volume UP button.
Maybe u need a second person for helping with the buttons,
The hardreset must be possible somehow, it cant be a broken touchpro
OK I tried with my phone and procedure 1.
VOL DOWN and CENTER with Phone ON
Then Push RESET with the Stylus and hold all three until:
After 5 seconds the Bootscreen showed, after that the message to press VOL UP for Restore.
You do not see the boot screen but just wait the time
You are so kind my friend!
I have tested all the hard reset options but none seems to work
Aparently I can´t do a hard reset
as every time I follow any process and wait 5 sec, then press vol up and it seems that nothing has happened, not even a soft reset!
Pressed center button and vol down, then press the rest button located behind the usb port (the one with a symbol for headphones....)
But nothing happens.
I´lll upload a small video with me doing the process, hope it helps in anyway
Here the link of the video I took with my problem
https://www.yousendit.com/download/ZW9DQ3QxeWFEbUx2Wmc9PQ
Hope this helps in any clue to solve my mysterious problem
Thanks a lot!!
Ok will wait for the video.
Inbetween another option, did u try to flash the ROM.
Can u get a rom to download from ur provider, to do so ?
After the flash the device more or less does a hardreset.
Update:
saw the video, it seems that the phone is not reacting to the center or the reset button. Because when u push reset, even if it is not in hardreset mode, it should do a soft reset right away.
But ur phone is straight reacting to the Vol keys, very strange.
Is the mentioned ROM update an option ??
What is the reaction when u hock the phone to the pc, is active sync working ?
Do you see the internal memory of the phone ?
Remove the SIM and any memory card, maybe they are causing trouble ?
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
orb3000 said:
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
Click to expand...
Click to collapse
Here ya go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
Take the one matching ur cell phone. Check the thread links for more Info.
Thanks, downloading
Tomorrow I´ll try to reflash and post results later
Cheers,
(Anyone? another idea?)
UPDTATE: I conected raphael to my computer and using pocket controller I can see that all is working ok inside but nothing on the screen, or keyboard lights.
I´ll try to hard reset now...
Hope this can help in order to solve my problem
Thanks
Attached the picture
UPDATE 2: I performed the wipe data from the device, this must be exactly as a hard reset I pressume, and nothing....
So now is there anything I can check to see if there is something loose in the connection from device to screen?
Any recommendations on how to do this?
signal from device working perfect simply does not come to screen or even to turn on light on keyboard
Any help is GREATLY apreciated!!!
What rom did you have? I had a similar problem and just had to rma it.
Hey fellas, My phone (HTC P3300) is stuck on the warning screen it shows when performing hard reset.. (This operation will delete all your personal data, and... )
It does not respond to any keystroke.. I've taken the battery out and then plugged in again.. but it shows the same thing over again..
I did not try to perform any hard reset btw... put it in my pocket and then took out after a while to make a call and it's same since then.. I don't suppose there was anything in my pocket that could have pressed the soft keys and then push the reset button.. Can this be a hardware problem?
Any help would be greatly appreciated.. Thanks in advance..
abhinay.jain90 said:
Hey fellas, My phone (HTC P3300) is stuck on the warning screen it shows when performing hard reset.. (This operation will delete all your personal data, and... )
It does not respond to any keystroke.. I've taken the battery out and then plugged in again.. but it shows the same thing over again..
I did not try to perform any hard reset btw... put it in my pocket and then took out after a while to make a call and it's same since then.. I don't suppose there was anything in my pocket that could have pressed the soft keys and then push the reset button.. Can this be a hardware problem?
Any help would be greatly appreciated.. Thanks in advance..
Click to expand...
Click to collapse
Yeah the problem could relate to your hardware.
What happens exactly when booting your device?
It just displays the same screen over..
So no boot screen, just when you boot, it goes directlly in that hardreset mode?
When this text appears, just press the Attend Call Button, colored Green. Hope this will help you.
Thanks
yes it takes me directly to the confirmation screen..
and the phone's not responding to any keystrokes either..
Have you tried performing a hard-reset?
If not, try it.
If so, can you go into bootloader or doesn't that keystroke work either?
Thanks.. Yes, I tried doing a hard reset.. It's the same again..
How do I go into the bootloader?
Hold down the voice speed dial button and soft reset – you should then enter bootloader mode.
Then, connect to your PC and flash a new ROM. Go to the Artemis section to find out more.
I couldn't enter the bootloader mode.. but I got it repaired... turns out there was some problem with the keypad.. :|
But thanks for your help guys.. much appreciated.
No problem, good to hear that your problem is solved.
I have a Xiaomi Mi4c with the latest Xiaomi.eu rom installed.
This is my problem:
When I receive a call and I take my phone out of my pocket, if I press the home button, the phone reboot itself!!!
But this happen every time that I receive a call not only in my pocket. If I press the home button while my phone is ringing, the phone suddenly reboot.
Can someone please help me? Can someone please tell me how can i fix this??
Please help me.
Thank you.
I have this problem too.
dos66613 said:
I have this problem too.
Click to expand...
Click to collapse
have you tried to hard reset? if yes, it solved the problem?
I've tried and nothing has changed. I hope it will be fixed with nougat...
The settings buttons I put a lock on the application, "the phone and contacts". I tes
MaxReed06 said:
have you tried to hard reset? if yes, it solved the problem?
I've tried and nothing has changed. I hope it will be fixed with nougat...
Click to expand...
Click to collapse
The settings buttons I put a lock on the application, "the phone and contacts". I test calls 10 min, until everything is normal.