T-Mobile Wing help please - General Questions and Answers

Hi i have a t-mobile wing and i tried to update my rom version. im currently running 4.17.405.2. i used the update from the t-mobile site but it wouldnt work and said to check my connections. i also tried on my laptop and it wouldnt update it from there. i then tried to flash a ROM using flash center and i made sure to install the enablerapi files and clicked the herald-uspl, but it still wouldnt work. it said something about not detecting the rapi. i installed the rapi to both device and storage card but still no go. please can anyone help me i would really appreciate this.

Related

Registry help, blackjack 2

Hey guys I really need help with changing something on my blackjack. I wanted to change the PDA version but I couldn't find it. I flashed the clean rom that was on here, and it changed it, I was going to flash back to the at&t version, but the flash app wont let me. I get an error that says the software version is wrong.

Possible brick issue HELP PLEASE

Hey GUys,
I'm not new to flashing and roms and all that jazz. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed rine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
Is there anything else I can do to flash a n
Have you tried to flash the SPL from the SD card? Worth a shot if not.
thanks for getting back, i have tried..multiple. It will just sit on loading as for everything except that damn att rom. i've been going at this for hours and hours. just to make sure, the spl flash will still be named KAISIMG.nbh correct? or has my frustration gotten to me
Yes but make sure you dont put the .nbh. Just kaisimg or it will be kaisimg.nbh.nbh and wont work
haha, yeap. i'm an i.t guy so i have file extensions showing by default so thats golden
I have the stock att rom up and running so the phone is functional, but that said, its the ****y att rom and I'd really like to change that asap., I'm just tired and fed up at this point really
Also for flashing SPL from SD card you need kaisdiag.nbh. Place it on the SD too. I should have told you that first. Its in my 4shared if you dont have it.
just tried it. it is stuck on the loading screen....
Try reading from here: http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave

[Q]Fuze undetected on any PC, just charges

I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
darkreborn said:
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
Click to expand...
Click to collapse
First, what OS are you running on your PC.
Second, have you disabled/Enabled "enable faster data" in Settings/Connections/USB to PC?
Third, Have you deleted the partnership and tried to reestablish it?
Doesn't seem to be a warranty issue.
Fuze Reply
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
darkreborn said:
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
Click to expand...
Click to collapse
Yes, you can revert via SD card.
Do Radio and ROM first, then do stock SPL last.
Rename each RAPHIMG.NBH (one at a time) on a FAT32 formated card 2gb or smaller.
Go into bootloader mode and it should flash from there.
I would test your USB connection after you flash back to stock ROM before you flash the stock SPL to see if it may have fixed your issue.
Huh
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
darkreborn said:
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
Click to expand...
Click to collapse
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Start here for issues encountered.
Basically once you find your ROM Radio and SPL, extract the files so you can see the .NBH files for each.
1. Take the ROM file and rename it "RAPHIMG.nbh " without quotes.
2. Place it in the root of your storage card and enter bootloader mode (Volume Down + Reset), the phone will read the image file and begin to load it.
Do this for each file but wait until the first file has loaded.
Radio.nbh will be renamed to RAPHIMG.nbh
SPL.nbh will be renamed RAPHIMG.nbh
As one is done loading, remove it from starage card and put the next one on and repeat step 2.
Another thread regarding SPL.
I hope this helps you and sorry I don't have the time to walk you through it.
Just read first then you'll know what to expect.
Bruce Inman said:
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Click to expand...
Click to collapse
my best guess is just in case the bootloader doesn't have drivers for SDHC cards... my x51v has drivers for SDHC in WM, but flashing requires SD cards because the bootloader doesn't read SDHC
revert SPL or no?
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
darkreborn said:
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
Click to expand...
Click to collapse
To be safe I would revert the SPL as well.
The 1.95 is the ROM build base.
You want to revert back to stock SPL 1.90.
I can't second guess what AT&T will cover or not but you may want to "further your cause"....
Best of luck!!!
in my experience (my UK t-mob vario is back at repair right now) - DONT revert the SPL if you cant do it from the USB.
Obvisously you have a different setup to me, but when i tried to revert my phone to stock for exactly the same fault (no usb sync, regardless of pc or cable / phone rom, state etc etc) i managed to get the phone to refuse to boot due to a spl / rom difference. As i couldnt load from usb - i couldnt flash anything new, and as i had managed to overwrite hard spl - i couldnt flash what i wanted from the SD card! (if i could get the usb to work, i could fix it all - but as that was the problem i had to send it off fubar)
For some reason (god knows why!) it appears that t-mob are repairing my phone under warrenty despite the spl error but i wouldnt advise getting yourself in the same situation, as i was 100% expecting it to come straight back to me!
My personal advice is send it off with the correct rom, radio & splash screens (and remove security unlock if required) so the phone looks stock - the only difference will be the spl version. They probably wont notice!
1.90 or 1.95
Thx for the info guys, my new phone is coming and it took me about 2 to finally on its way. About the SPL, mine says 1.90 and that was when i first did the hard spl to change roms. What is the stock SPL 1.90 or 1.95? at loading it hows me 1.90 olinex i think...also i can change it if needed with my 8gb sdhc card or no?
I had a problem with my PC not detecting my fuze a few weeks ago. I found out it was my new firewall blocking the connection. I disabled the firewall and it worked like normal.
If it were me i would try to connect again after you flash the stock rom. If there was something wrong with the usb it still wont work. If it connects to activesync the maybe it was your ROM, or something else.
Just a suggestion

What am I doing wrong?

Hey ppl,
heres the problem
ive downloaded juicy r10, the latest Leo and mightyrom.. and everytime i try to run the RUU, there is a CRC error comes about.. ive tried it on an XP, Vista and Mac running a parralel desktop.. so it must be something im doin wrong?
so what is it? anyone know? please help asap!!!
Is your phone unlocked?
who is your carrier?
Ive used MIGHTYMIKES ROM before on this fone,, and thus using the spl.. but i cant get any orms to work now. my laptop is away from me for a week and now i have a bricked fone...
i cant ut it on sd card since my adaptor with my rom.. but i cant help but wonder why is every rom i download have a corrupt .nbh file?
did you download the CDMA or GSM energy rom?
can you get to bootloader?

[Q] HELP!!! HTC Hero Problem

ok, i apologize off the bat because im new at this and need help. basically my friend updated my htc hero firmware from 1.5 (Stock) to 2.1 version and rooted it. well now my wifi is unable to connect, my phone lags, and my internet is all out of wack. so i proceeded to take it back to original version and have been unsuccessful. I have downloaded two different ruu's because i am having trouble finding the stock ruu. I have tried on the RUU_Hero_C_Sprint_1.29.651.1 now i connect my phone to my pc (windows xp) and i turn on debugging and use htc sync which the phone will connect to my pc. i open up the ruu and it runs and acts like it is working then gives me error code 140- bootloader version error. then i use RUU_Hero_HTC_WWE_1.76.405.1 and it does the exact same thing and gives me error code 130- Model ID Error. I have no idea what to do or how to fix it. If anyone could give me some advice or help I would GREATLY appreciate it cause i just want my phone back. Thank you for reading. and ill do my best to provide anymore info if you need it.
fixed
i was using the wrong ruu i was using gsm when i should have been using cdma
try Cyanogenmod and you will not have this problems

Categories

Resources