Hey ppl,
heres the problem
ive downloaded juicy r10, the latest Leo and mightyrom.. and everytime i try to run the RUU, there is a CRC error comes about.. ive tried it on an XP, Vista and Mac running a parralel desktop.. so it must be something im doin wrong?
so what is it? anyone know? please help asap!!!
Is your phone unlocked?
who is your carrier?
Ive used MIGHTYMIKES ROM before on this fone,, and thus using the spl.. but i cant get any orms to work now. my laptop is away from me for a week and now i have a bricked fone...
i cant ut it on sd card since my adaptor with my rom.. but i cant help but wonder why is every rom i download have a corrupt .nbh file?
did you download the CDMA or GSM energy rom?
can you get to bootloader?
Related
Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks
Need More Info
We need more info to properly troubleshoot...
Make of phone (TyTn II, Tilt, Vario III, etc)
If you are trying to use this rom on anything other than an unbranded HTC TyTn II, then it will not work unless you have used HardSPL to remove carrier branding first.
Check out http://forum.xda-developers.com/showthread.php?t=369282 for more info.
260 errors are usually related to USB port access. If you are using McCafee or Firewall software, you will have problems unless you disable or gifve full access.
Again, to quote NotATreo, more info will help, but consider temporarily disabling firewall or virus software.
Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot
pyk said:
Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot
Click to expand...
Click to collapse
I was able to flash while running the mcafee, but I still can't connect to the internet after flashing the Hard SPL and the radio
Have you try using SD card to flash?
just renamr file "RUU_signed.nbh" to "KAISIMG.nbh" and place the file in your Micro SD card.
Power on the phone and enter bootloader mode by press "power botton" + "camera botton" and using stylus to reset the device. It will auto start reflashing the ROM. It only takes 1min to 2min.
Tried the mcafee thing but then it gave me the Vendor ID Error
Basically there is no way around except for flashing the Hard SPL and removing the vendor thingy.
Not sure if i want to do that cause that will void the warrenty.
Tanks so much guys
Well, technically you are but they don't know it untill you make it noticable and there are ways to make it back to OEM.
pyk said:
Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks
Click to expand...
Click to collapse
Just flash while you are in bootloader screen (tri-color)
Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks
well... When I purchase a new phone, I never think about returning it unless DOA. When I flash my Tilt and iPhone, there is no turning point. Oh well, I change a new phone almost every year......Currently wait on my new N96
pyk said:
Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks
Click to expand...
Click to collapse
well i had to do the same thing but i just used jump.spl. it worked great and now im runnin wwe 6.1.
ERROR 260
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean
sean_kore said:
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean
Click to expand...
Click to collapse
I would try plugging your cable into a different usb port and giving it another try- this has worked for me so far. Good luck
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
hey...
so i tried to flash a new rom to my wizard...
but now im at the point where i have to flash the t-mobile 2.26 rom to my device...but whren i doubleclick it nothing happenes...no windows opens...
what is the problem?
i tried to download it again and restarted the pc...i have no idea what to do..
please help me!
thanks
Hey GUys,
I'm not new to flashing and roms and all that jazz. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed rine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
Is there anything else I can do to flash a n
Have you tried to flash the SPL from the SD card? Worth a shot if not.
thanks for getting back, i have tried..multiple. It will just sit on loading as for everything except that damn att rom. i've been going at this for hours and hours. just to make sure, the spl flash will still be named KAISIMG.nbh correct? or has my frustration gotten to me
Yes but make sure you dont put the .nbh. Just kaisimg or it will be kaisimg.nbh.nbh and wont work
haha, yeap. i'm an i.t guy so i have file extensions showing by default so thats golden
I have the stock att rom up and running so the phone is functional, but that said, its the ****y att rom and I'd really like to change that asap., I'm just tired and fed up at this point really
Also for flashing SPL from SD card you need kaisdiag.nbh. Place it on the SD too. I should have told you that first. Its in my 4shared if you dont have it.
just tried it. it is stuck on the loading screen....
Try reading from here: http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave
Hi i have a t-mobile wing and i tried to update my rom version. im currently running 4.17.405.2. i used the update from the t-mobile site but it wouldnt work and said to check my connections. i also tried on my laptop and it wouldnt update it from there. i then tried to flash a ROM using flash center and i made sure to install the enablerapi files and clicked the herald-uspl, but it still wouldnt work. it said something about not detecting the rapi. i installed the rapi to both device and storage card but still no go. please can anyone help me i would really appreciate this.