cant open t-mobile 2.26 rom - 8125, K-JAM, P4300, MDA Vario ROM Development

hey...
so i tried to flash a new rom to my wizard...
but now im at the point where i have to flash the t-mobile 2.26 rom to my device...but whren i doubleclick it nothing happenes...no windows opens...
what is the problem?
i tried to download it again and restarted the pc...i have no idea what to do..
please help me!
thanks

Related

Please help

Hi, I tried updating my rom using faria-htc wizard...WWE WM6 ROM and after it was complete, it said there was some error during the setup. So after doing the other steps to start the install over again, now it's telling me that I have a old updater version, and now my phone is stuck on the boot loader screen and I have no idea what to do?
If someone can please help me install the oem version or get the WM6 version that would be great!
Thanks
http://forum.xda-developers.com/showthread.php?t=298613
ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing
dpgmeister said:
ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing
Click to expand...
Click to collapse
Do you have a G3 or G4 Wizard? What is your IPL / SPL currently? If you are on the Bootloader screen (rainbow screen) then all you have to do is hook up your USB cable and flash your carrier's official rom. Activesync will NOT connect to bootloader, but it will work.
I have a G3. My IPL and SPL are both 2.25. Where can I download Cingulars ROM file from? I tried finding it but having no luck.
Thanks
Cool thanks man, I got it working again. The download section at the HTC website was finally back up

Ok the thing is not working

Hello I have done all the Faria tutorial and got it unlocked and IPL AND SPL 3.08, but when I tried flashing a WM6 rom the process stuck at 6% and the update program gave me a "conection failure" error and then started a step by step recovery process... I have done it and now i´m with the 3 colors screen (red green blue) but I´m trying to flash a rom to it without success. why is that? can someone help me?
you need to read this thread
http://forum.xda-developers.com/showthread.php?t=314646
I hope you weren't flashing with vista. I think it requires the shell tool.
no, no vista.
I have followed EVERY instruction in the VIPPIE: http://forum.xda-developers.com/showthread.php?t=298613 and FARIA tutorials, the problem was that when flashing it gave me a connection problem at 6% and then is not stuck in the bootloader screen. I hope my phone is not damaged since i´m in brazil. But I´ve tried several roms without success... they say problems with version OR with connection. Why can that be?
it stays a long time in "verifying the information on your PDA phone..." and then it returns those errors I´ve mentioned.
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
thank you man!!! I will try that right away!!!
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
fscussel said:
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
Click to expand...
Click to collapse
Once unlock...always unlocked unless you reversed the procedure.
If your flash of a custom rom fails again, your device is probably not CID unlock and you need to go thru the unlocking process again.
ok after fixing the problem with the n3rxs help I´ve flashed the Wizard Love rom to prepare to flash a WM6 rom. The Wizard love rom i´ve used has a Italian instalation program, is that right? after I installed it the cell phone keeps reestarting I can´t do anything in it, it only loops restarting... what´s that?
found the solution, had to keep the camera button pressed and then reset the device so it enters in BootLoad mode then I flashed a original cingular bios and after that upgraded to WM6 without a glitch!!

After hard-spl...simple question

I everybody i'm new here but it's fantastic.plenty of helpful things.OK that's my question:I have a kaiser and i flashed the hard spl and it's ok.i got in the bootloader:
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
So it's ok,the bootloader is patched.now,i have windows mobile 6,and i want to install the ROM "tir 8k ITA",from here http://forum.xda-developers.com/showthread.php?t=437860 and i read it was windows mobile 6.1
So my question is:do i have to upgrade to wm 6.1 and then flash the rom or i just do it without upgrading?Thnks bye
No you don't. The ROM you're looking at will install 6.1 for you. Read his instructions on that link and if you have a problem, post it in that thread.
do i have to flash a radio or it's already implemented?Thanks bye
Each chef will let you know if they included the radio or not. If they didn't include one, they will tell you which one is recommended and more than likely will give you a link to that radio....hope this helps...
tolac92 said:
do i have to flash a radio or it's already implemented?Thanks bye
Click to expand...
Click to collapse
Most roms come with a radio but some don't, read the rom thread and then go here to flash the recommended radio.
http://forum.xda-developers.com/showthread.php?t=393182
Yes but in the post here http://forum.xda-developers.com/showthread.php?t=437860 there's not written i there IS or NOT the radio.How can i know?thnks bye
read the whole thread and others recommend different radios......
Ok i read the entire thread and the answers and i downloaded the radio 1.65.17.54
Perfect now i flash the radio and then i reboot and then i flash the ROM with the tir 8k?Can i let the pda turn on after installing the radio or this may cause problems?Gr8 Thanks bye
tolac92 said:
Ok i read the entire thread and the answers and i downloaded the radio 1.65.17.54
Perfect now i flash the radio and then i reboot and then i flash the ROM with the tir 8k?Can i let the pda turn on after installing the radio or this may cause problems?Gr8 Thanks bye
Click to expand...
Click to collapse
Please read the flashing first ROM http://forum.xda-developers.com/showthread.php?t=433835 all the steps are there.
If you're flashing a WM6.1 rom you may also want to change your hardSPL from 1.0.OliPof to one of the 3.xx series SPL's. The older SPL can cause some newer roms to hang, slow down etc. I use SPL3.29 which works fine form most WM6.1 roms.
Thanks everybody i successfully installed it.
And it's very fast,even with the old version of hardspl.If i wanna speed it up.Can i just flash the 3.xx hard spl?after do i have to RE-FLASH the rom with "tir 8k"?
Problem:I have a TIM sim,but the pda still connects to the 3 tim band.Before i had the 3 brand rom but now i should be able to connect to the band i want.why can't i?Thanks bye
Anyone can help me?Please help me i'm a newbie i DO need help.Thanks bye
tolac92 said:
Thanks everybody i successfully installed it.
And it's very fast,even with the old version of hardspl.If i wanna speed it up.Can i just flash the 3.xx hard spl?after do i have to RE-FLASH the rom with "tir 8k"?
Problem:Thanks bye
Click to expand...
Click to collapse
flash the 3.xx spl the same why you flashed 1.0...it wont format ur device, meaning all your "stuff" will still be there...no need to re-flash the rom..
as for this>>"I have a TIM sim,but the pda still connects to the 3 tim band.Before i had the 3 brand rom but now i should be able to connect to the band i want.why can't i?"
elaborate more, i dont understand what your saying!
Anyone can help a poor newbie?Pls help me...thanks
thanks mazin13,
sorry for the post i didn't see it,anyway i'm reflashing the hardspl 3.xx as you told me.
Sorry for my english,i'm italian,i'll try to elaborate the sentence u didn't understand.
Well,before i reflashed the tir 8k rom and hardspl, i had the default rom with windows mobile 6.i have as phone operator TIM and so the sim card is TIM.but when it turned on it was always used to connect to 3g tim,which is not my connection,because i have a TIM sim card.so i realised that if i would have installed the new rom no brand,i could have connected to the TIM connection,NOT 3g TIM connection.Why still it connects to 3g tim even if i flashed the no brand rom?Why it behaves like before when it was brand 3?Help i explained better...Thanks bye

Help...Stuck on Boot screen

I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !

What am I doing wrong?

Hey ppl,
heres the problem
ive downloaded juicy r10, the latest Leo and mightyrom.. and everytime i try to run the RUU, there is a CRC error comes about.. ive tried it on an XP, Vista and Mac running a parralel desktop.. so it must be something im doin wrong?
so what is it? anyone know? please help asap!!!
Is your phone unlocked?
who is your carrier?
Ive used MIGHTYMIKES ROM before on this fone,, and thus using the spl.. but i cant get any orms to work now. my laptop is away from me for a week and now i have a bricked fone...
i cant ut it on sd card since my adaptor with my rom.. but i cant help but wonder why is every rom i download have a corrupt .nbh file?
did you download the CDMA or GSM energy rom?
can you get to bootloader?

Categories

Resources