help:red, green, blue screen on startup - General Questions and Answers

hi i'm a noob and i just updated my 2007 shadow to 6.5 custom rom
it was working fine until i hooked it up with active sync
it kinda froze so i just took out the battery
then when i went to start it up i got this red green blue colored screen
I tried a hard reset it doesnt do anything work and i dont know what to do
please help me i have no idea what to do
the screen looks like this
The Red bar says:
Phoebus Wifi RUU
ONBL 1.11.0000
Phoebus
---------Green bar starts----------
SPL 1.11.0000m F256
Phoebus IU
----------Blue bar starts------
CPLD - 00
----White blank bar starts (sometimes says USB when connected---

You are stuck in Bootloader mode. Go to the shadow section and see if someone in there has any advice. You may also want to reflash your rom as it may be that you had a bad flash to begin with.

Related

MDA will not boot, freezes at boot t mobile boot screen!!!!!

:shock: Gasp, a problem with my MDA! :shock:
Hello everyone, I was holding my mda in my hand today, and suddenly the phone beeped, and then turned off. This sounded like a submarine sonar. Anyways, when I turn it back on now it will go to the t mobile screen ( boot screen ) load up the first 4 lines of red characters, and then hang. It will not do anything, and eventually it will beep. It does this regardles of power source (wall/battery). The four lines that it loads are :
ipl 1.08
spl 1.08
gsm 01.09.01
OS 1.8.10.2
After these load the windows loading icon that spins appears in the middle of the screen and the system makes the same sonar booey sound. MY MDA WILL NOT TURN ON!!!!!!!!!!! Thanks in advance for all the help, does anyone know how to fix this?
David Sondergaard
Poor man!! but hehe... your savor is here!!!
you need to press the Camera button then press reset (DON"T RELEASE THE BUTTON UNTIL THE 3 COLOR STRIPS COME OUT) --> ALready enter USB mode, from here you can flash your ROM (Recomended with Oringinal ROM)...
I have exactly the same problem and it work on mine...
Good luck man!
pls see this link. http://forum.xda-developers.com/showthread.php?t=250709
if you have further question email me: [email protected]

Help with a brick AT&T/ HTC 8925

I have an AT&T/ HTC 8925 that during flash it stopped and now I have the red, green blue and white screen. I followed the instructions on the screen for recovery and when I remove the battery and re-install it the screen comes back to the multiple color screens. Now even though my computer knows that I plug in the USB and the PDA screen goes from serial to USB, you still can not flash it. Is it a lost cause or is there someone that knows what to do? Help

help! white screen after trying to upgrade

my screen goes white and does not load the program.
it shows the brand when i hard reset my imate jamin but after that it all goes to white.
the worse thing is, i cannot install the rru prohit that is use to fix it.
the computer does not even recognize or detects that the device is connected. ]
any help will be much appreciated.
me too, after change rom from wm6.1 to else is white screen
pls help

imate jamin boot up screen

oh my head hurts from this. manager came in saying that his imate jamin is not working .. typical managers. it turns on but stays at the htc innovations boot screen.
tried the original shipped ROM but comes up with Error 260: Update Error. USB ok as there's a orange charge light and shows up on bottom left of tri colour screen. tried on a couple of different pc both running xp pro sp3. i've wiki, searched, did resets, etc but still no go.
i just get the following at the tri colour screen
ipl 1.00
spl 2.13
help please? thanks in advance

[HELP] Critical problem with diamond screen!

a couple of days ago i was flicking through pictures on my phone then the screen went all black with a few random flashes of white straight horizontal lines towards the top of the screen then it reset!
when i went home from work i thought it was the 6.5 rom.. i flashed another 1 and it wouldnt display anything on the screen so i pulled out the wire and i got an error message sayin it wasnt flashed properly or however that message goes... anyway so my phone shows the boot loader screen.. 'Upgrade Rom code error Please try again' flashed a couple of other roms and i know its on it jus doesnt show anything on the screen.. i plugged in my phone and used mymobiler which is an aplication 2 use the ppc using ur pc mouce and used this program 2 bypass the alignment screen.. http://goatechno.blogspot.com/2008/12/windows-mobile-stuck-at-screen.html
i then had random white flashes on my screen... bottom left lights are lit?
what do i do? is there a bad graphics driver or something?
please help!
im downloading stock rom now...
has any1 else encountered this problem?
flashed stock rom stock radio still the same prob.. does anyone know
i can only see the bootscreen

Categories

Resources