Database Info

My Himalaya not responding after sometime I turn it off

I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:

I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?

zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other

I have the same problem too, the only ay to have it back is softreset

i was using spb to toggle display mode.

someone said can be solve by reegedit. but how to.

anyone found a solution..?

Lock red and green button

It´s possible lock the red and green button, (received and cancel calls) when i lock my phone?
I want that because when i put my S200 in the pocket, sometimes i really answer the call.
It´s possible?

I verry often have the same problem and for me I decided to physicaly grind down this buttons... If it is possible, i don't know.
Anyone a better solution?

Same problem here
Hi, I got the same problem, missing calls every day.
is there any possibility to have the buttons e.g. pressed 3 times to get an call answered?
Thanks!
I appreciate every solution!
Jan

well you all can have my dopod 818pro. My Red and green buttons have just stopped responding. Everything else seems to work fine but maybe god heard your prayer and disabled the red and green buttons on my phone for no reason at all
;-)

lock, lock...
Hello,
I also have this problem, I use a program that replaces the dialpad: DAD Touch Smartdial 25_24516, which locks the green button. You can call that when there is a number typed Otherwise, the green key is inoperative.
I hope you understand my English just a translation of google.
good chrismas

Hi
I have a wm6 rom and in Start > Configuration > Personal > Buttons I have an option like I show in the attached file.
I don't know if you are looking for.
Merry Christmas

open password...help..
HELP ME...
My DOPOD 818 Pro can't open a device lock anymore because a password is change.
In phone screen is type "emergency phone calls can be made" and then "Password you typed is incorrect"
how to open that password?because hard reset cant open 2..
help me..
thanks
sorry if my english not good

Bt Htc S710 Original Rom

Hello forum members,
would you please help me have the BT HTC S710 Original ROM? I have only seen the BT HTC S620, which when I tried to flash with to rebrand, blanked my HTC S710 screen. When I turn it on, only the two green lights come on either side of the phone ear piece.
It means that a hard reset is not visible on my screen, there is no tri-colour display either.
I have tried other ROMS, and get invalid id errors and error 270. I have tried Dr Gonzo and related ROMS.
It's now three days, no phone no pim, I am lost.
Thanks for your attention.
YOSEFE.
PS. You may PM me if convenient.

Hi YOSEFE,
I have the same problem
I tried the 620 rom and just have the 2 green LED's. I cannot get a bootloader screen and attempts to flash new roms get to 3% and then I get errors.
Did you ever sort this problem out?
Paul.

Have you unlocked ur USPL in ur phone?

You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...

frauhottelmann said:
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
Click to expand...
Click to collapse
Yes, I'm afraid I did, by mistake, flash 620 ROM to the 710 [feels rather stupid!]
Not happy with BT’s [mobile operator] own ROM and software that went on the phone, I successfully flashed Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 and have been using it for a couple of months but when BT launched their new phone software, I decided to try it but because it won’t work with WM 6.1, I needed to then revert back to BT’s old ROM and this was the only one available that I could find [feels rather stupid again].
The screen is completely black; only green LED's on each side of the earpiece shows any sign of life.
Connecting the phone via ActiveSync shows “HTC-S620 Connected” and I am able to browse the files on the phone but not having a display on the phone, I am limited to what I can do.
I have tried running RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe but ActiveSync connection is lost and I hear the Windows hardware removed sound shortly after the progress bar is shown.
I’m at a loss as to what to try
Paul.

Shut it down, then hold down camera button and plug in the usb cable. The boot screen should appear and you should be able to flash the normal ROM!

I cannot get the boot screen, or any screen for that matter.
I have tried taking the battery out to make sure the phone is off. Reinserting that battery then holding the camera button down and then inserting the usb lead. The keypad lights up for a few seconds then goes out. ActiveSync then connects but the screen is still black
Paul.

[Edited: Sorry duplicate post]

Sorry for replying to my own post but a quick update...
I have managed to bring the phone back to life and reinstall Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 on it again.
This is partly assumption and not particularly accurate but the original poster (YOSEFE) might find this useful.
By installing the S620 rom on the S710, not only did I make the screen go blank, I think all the keys ended up remapped and mixed up, therefore any attempt to install Gonzo’s rom ultimately ended in failure because when the phone beeped and wanted a keypress to continue, pressing the left softkey for ‘OK’ or ‘Yes’ did not work because it had been remapped to do something else.
What worked for me is that when the phone beeped during the uspl_116_jockyw.bat install, I pressed the X or C key (I can’t remember the exact one now). One of these keys must have been the ‘OK’ or ‘Yes’ key after the S620 rom muddled things up. I only know this by trial and error over the period of today.
To my glee, the backlight lit up on the display and after a bit of tinkering, I’m back in action again
I won’t be installing a rom designed for another model again!
Paul.

Bat 'n' Ball,
sorry for not returning here to see your post. I will remember the possibility of pressing "X" or "C", should I make the same mistake as before, although like you, I should never do that ever again. However, technology being what it is, who knows?
In the end BT got me sorted out.
Thanks for sharing.

How to hard reset the Raph?

Hi, guys!
I 've just got a HTC Touch pro (O2 Xda diamond pro) from O2. I was not really satisfied with the branded Touch Flo 3d interface wherefore I tried to use the Diamond 3d Config Tool touchflo to put my device back to original HTC settings. But since these original UI was much slower than the O2 one(personal impression) I decided again to reset my device to use the stabdard O" branded Touch Flo 3d interface. Unfortunatelly when I change to keyboard mode I still see a HTC screen instead of the O2 screen.
Can you please help me on this?
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Please can you help me at least by telling me (maybe with photos) which buttons to use to hard reset and how the screen should look like? I have ofcourse checked the user guide, but I do not see the screen asking me whether I really want to do a hard reset (as described in the user guide).
Please help me on this!!!
Many thanks in advance!
Regards,
BBMG

Some would say RTFM or the Wiki before you post but I've been helped so many times here when I didn't deserve it I'll say volume down + enter + reset

Hi!
Yes, thanks for the tip, but I have ofcourse tried that and as I said there are just some color bars appear on the screen. BUt before they appear I see a message "No Image File!". SHould that mean, I cannot hard reset my devicè anyway?
Regards,
BBMG

Had same problem
Hi,
I had the same the same problem with my O2 xda diamond pro.
But I've solved it.
- turn on xda and wait ~ 2 min until all services run.
- press volume down
- press with a pencil with a soft tip on enter (round Button in center)
- hold everthing pressed (tricky)
- press reset button and wait until konfig screen aproache
- Follow messages
- Done
hold pencil with my mouth. Looks like circus act...

BBMG said:
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Click to expand...
Click to collapse
The enter key is the circular button under the screen, not the one on the keyboard

Still does not work
Many thanks for the tip. Yeah, it really looks like a circus act, but still does not work at all. First fo all I see a white screen (I assume that is the boot loader) saying "Loading ..." and short time after that I see a message "No Image File!". After that, I only see the following screen. Sorry for bad image quality. Took it with my old Nokia 6230i device.
Any tips?
Maybe there is someone who knows either from where to get an original O2 xda Diamond Pro image or how to setup the vertical screen that appears when the keyboard is open?
Text on the screen:
RAPH120
SPL-1.90.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Serial
Many thanks in advance!
Regards
BBMG

Is there really noone who can help me out?
Hi,again!
Does anybody noticed the same problem as I have described above?
Please help me out guys!
Thanks in advance!
Regards
BBMG

You did read that the "enter" button is the round button on the front and not the "enter" button on the keyboard?

you entered bootloader, that mean you didnt hold the "enter" button (circular looking, when plugged in you see lights around it) at front of the phone, while holding vol down and press the reset button

BIG BIG Thanks
Hi, again!
You, were totally right. I was too stupid to recognize the round button as the enter button, although it was mentioned already before.
Now, my device is restored correctly.
Thank You!

hmmm
i kinda got the same problem but i pressed the Circle Button + Volume Down + Soft Reset
.. always if i do so it hangs at the T-Mobile screen
the bootloader with Volume Down + Soft Reset works fine
... any tips what i do wrong or what i could do now ?
and btw dont install Nydiot Virtual Desktop on your raph

SPV M3100 frozen

I know this is a bit of an old phone now, but I'm hoping someone might be able to help...
When I switch the phone on, it gets to the Windows Mobile screen and then just hangs. After a few minutes, it turns itself off.
So far, I've tried the following;
1. Soft reset
2. Hard reset
3. Remove battery, put on charge (red light), replace battery (amber light), hard reset
4. Removed battery for 2 weeks
5. Praying
6. Swearing
Does anyone have any other suggestions?
Thx

Bad Flash
Hi
You could try starting the device in bootloader in order to re-flash the ROM, or flash a new ROM. Methods for this are:
1) Press the soft reset hole button whilst holding camera button fully in.
2) Remove the battery, then re-insert it and switch the device on by pressing the power button but again ensuring the camera button is depressed fully.
3) Remove the battery and re-insert it. Don't switch the device on but plug it into a Windows PC using a USB cable whilst, you guessed it, depressing the camera button.
If you can get into bootloader (three coloured screen with some yellow writing) then you can probably reflash the device. It sounds like a software problem not a hardware problem but I could be wrong on that.
If you can't get the device into bootloader mode you have a problem that is more complicated to fix, about which I can't advice.
Best wishes
andrew-in-woking

For info
Check out these definitions:
http://forum.xda-developers.com/showthread.php?t=319077
http://forum.xda-developers.com/showthread.php?t=356299
http://forum.xda-developers.com/showthread.php?t=273831
Awaiting an update!
Cheers
andrew-in-woking

Hi,
Thanks for the reply....I couldn't get your method to bring up the bootloader to work, but tried pressing Power and OK while doing a soft reset.
This brought up a screen with 4 horizontal bars - red, green blue & white. Text at the top says;
HERM100 (text in white)
IPL-1.01
HERM100 (text in yellow)
SPL-1.04
In the white bar is the word 'Serial'
Does this sound right?
Then it just hangs on this screen - is there something else I am supposed press on the phone, or do I do something via my laptop with activesync etc?
Sorry for the additional questions, but I've never had to do this before.
Thanks

An update....
After noticing that 'No GSM' appears on the splash screen, I have now found this page which I think might answer my questions.
I'll have a go at this tonight

Reposted in the Hermes thread