a couple of days ago i was flicking through pictures on my phone then the screen went all black with a few random flashes of white straight horizontal lines towards the top of the screen then it reset!
when i went home from work i thought it was the 6.5 rom.. i flashed another 1 and it wouldnt display anything on the screen so i pulled out the wire and i got an error message sayin it wasnt flashed properly or however that message goes... anyway so my phone shows the boot loader screen.. 'Upgrade Rom code error Please try again' flashed a couple of other roms and i know its on it jus doesnt show anything on the screen.. i plugged in my phone and used mymobiler which is an aplication 2 use the ppc using ur pc mouce and used this program 2 bypass the alignment screen.. http://goatechno.blogspot.com/2008/12/windows-mobile-stuck-at-screen.html
i then had random white flashes on my screen... bottom left lights are lit?
what do i do? is there a bad graphics driver or something?
please help!
im downloading stock rom now...
has any1 else encountered this problem?
flashed stock rom stock radio still the same prob.. does anyone know
i can only see the bootscreen
Related
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
I'm trying to flash Dutty's hybrid 6.1 ROM via microSD card and I'm having some trouble. While it's flashing the bar at the bottom loads all of the way and then seems to stop right before finishing. I'm tried it three times and each time the same thing happens... "Update in progress..." and the bar isn't moving anymore.
Any idea what's up? I've left it like this for several minutes and nothing happens. Also, if I can't get it to work, how do I get it out of the bootloader screen and back the regular OS?
bump.. I'm stuck in bootloader mode and cant get out!
what does it say on bootloader?
also leave battery out for 1min and see if it boots to os.
hi all
i got a magician from a friend to play with but when i got it i only saw it starting up and then by align screen it would boot further
ive went to the wiki and checked ive i could find the combo for hard reseting this phone(whitout succes) i managed to find how to get in bootloader so i checked it
when i go in the bootloader my screen doesnt light on(is this normal because my other devices do this)
further it says v1.02 on the bottom of the screen
now ive tried to insatl the dutch t mobile rom from the wiki but i get a connection error
now ive seen that updating this phone doesnt go like on a blackstone\rhodium and it has something to do with a sd card in it?
i have the gap for sd card but not one in it(is this nessacary?)
after the connection errors i cant even see the align screen anymore it goes straight to bootloader when i press only the on button and getting out the battery for a minute and put it back in also brings me to the boortloader when i press the power button:S (now its working and i can get to align screen again:S)
can someone please help me fix this phone
best regards mini
You have Rome. You need from T-Mobils Rome:
- ms_. nbf
- nk.nbf
- radio_. nbf
All that in the folder suspended below copy. The device in the boat mode bring (On top the left and right key + power) Then you are able to do him flashen.
thanks for the reply
got a exe file to use but going to try to extract it when im home and hope i get those files from it
stil not working
tried it a couple of times but i always get this message
btw in bootloader it says v1.02 on the bottom
and strating in bootloader doesnt work at all for updating because the program doesnt see the phone:S
i have to get it started up to the point of align screen then connect it to comp with activesync
then i got those screens
when i start the phone i see the next things on the phone in spalsh screen
r1.12.00
g1337.42
d1.12.00
i dont have a memorycard in it dont know ive thats nessacary
best regards miniterror
one more with the back sticker so it really is a magician
If is a Magician. The mistake 101 means which does not fit the ID. What you can still try to protect your Rome and more than 416 bits, a Big Storage Rome to flashen. You can make this everything about memory map. You find instructions here.
ok i dont get it at all so i'll throw away the phone
thanks anyway for trying to help me
Hi,
I've flashed my phone (HTC Touch Pro) with Hardspl and then the latest Energy ROM.
Everything went perfectly and I was impressesd with how simple and easy it was and how much difference the ROM made to the phone.
Today, while using the camera, the screen went blank.
I tryed turning the phone off, pulling battery and a hard reset but its still the same.
Even after hard reset, the screen is blank but if i press the power button, on the second press, I get a flash of whats on the screen and then it goes blank again.
Should I try to reflash the phone again?
I've searched but not found the same issue
Thanks
The touch screen is still working and sometimes i can see the display, but its very dark and hard to read. Is the flex cable that needs changing?
Why would it stop working so suddenly?
Should i take it apart to reseat it?
Ok, I've found the same issue in a few other peoples phones but they seem to have beeen resolved by sendin the phone back under warantee.
I dont have that option unfortunatly so need to find a fix.
The only thing wrong with the phone is the screen backlight that suddenly failed
Can anyone help me or point me in the right direction please? I cant find a definite diagnosis anywhere
New Flex cable?
New Screen?
Pray?
Thanks
Back to stock SPL and stock ROM
Still no luck
I was using pure xperia rom which was working fine but yesterday i had a strange problem. my phone screen first went blank then colourful stripes appeared on it. although the phone was working as i was able to use it (from my memory). i opened recovery but it faced the same problem.. but after few minutes my phone screen started responding.. but it all started happening again.. so i thought to revert back to stock rom v2. i flashed it using sp tools and my phone worked fine for almost 1 day but the same started happening again..:crying: the only difference is instead of black screen with stripes a dark blue screen appears.. what should i do? is this a hardware problem?
p.s. i have not installed any new app. currently my phone screen is responding.