hi all i cant seem to get a signal on my hd2, with any headphones plugged into the socket so i was wondering if id have better look with another app, or wont it make a difference,
ps. at home (Nottingham, uk) i get a minimal signal and at work in large building i struggle to even get a remote signal at all
i have the same prob on mine, uk also.
The same.
Best thing to do is to report the problem to HTC support, so we can get a hotfix.
I also have the same problem - awful FM reception
Here is the link for HTC UK Customer Support - I suggest we all mail them with the problem.
http://www.htc.com/uk/CS_Mail.aspx
Hi guys,
I am experiencing the same problem but the thing is that I am in Germany not UK and I get just 2 radio stations!
Could not get any radio stations with the supplied headphones plugged in.
Tried using my big headphones with a 3m lead.
Picked up all stations crystal clear. All well and good, but hardly practical to carry them round with me when out and about
+1
I'm in Luxemburg. 2 stations with HTC HD2 / 12 stations with old Samsung OMNIA
same problem here in italy...
no problem here in Austria ... radio reception is very good, I get all local stations
everything's fine here !
all stations receive !
French country !
All station work ok where I am in the UK if I tune them manually using in ear headphones but doing the auto scan and save it detects nothing
no stations in norway
i get all the stations here in norway. maybe u should try new headphones.
no radio stations in the netherlands. i mean with the HTC HD2 of corse !!!!
radio suffering
Radio sometimes locks the device in turkey
no radio stations in sweden
+1 (Croatia)
mine seems to just keep loading and loading and loading.. never has frosen yet though.. also in norway.,.
Hello
after several posts with Customer Support of HTC and with full and yes full explaining exactly this problem with auto scan, I get this answer
=============================
Thank you for contacting HTC ,
Dear Mr. *****,
Regarding the issue you're facing with the handset, kindly follow the instructions below:
Kindly confirm that you have followed the instructions below to save the channels:
To save FM stations as presets
1. Tune in to the desired FM frequency, and then tap Presets.
2. On the Presets list, tap that appears on the desired preset number where you want to save the FM station.
Tip Tap to remove a favorite FM station from the list.
3. When done, tap OK.
To listen to a preset FM station
On the FM Radio screen, tap the station preset button. If the station preset button is not on the screen, tap Presets, scroll through the list of preset stations, and then tap the station you want to listen to.
If you've followed the steps above and still the issue persists, please perform the troubleshooting below:
1) Kindly Check if the device has enough Free Memory to run (at least 5MB)
Please go to : Start> Settings> Menu> All settings>System> Memory,
If there is less than 5 MB free in each category, you need to free up some memory by removing files from the device or by shutting down programs that are not actively in use.
To Free up the program memory
Please go to : Start> Settings> Menu> All settings>System > Task manager> Stop All.
Free up the Storage memory
Please go to : Start> Setting> Menu> All settings>System tab> Managed Programs. Remove programs.
Once memory has been freed up, kindly re-test.
2) Please check if this issue has occurred after using any 3rd party applications. If yes, please remove the 3rd party software and retest the device.
3) Kindly perform a Soft reset to the handset by removing the back cover and pressing the reset button.
Incase any of the troubleshooting above doesn’t solve the issues you’re facing with your device kindly perform the following:
Please backup all data on the device by synchronizing to a computer, My phone application, or using a data backup program using a memory card, afterwards, perform the Cold-boot (Hard-Reset) and retest the device.
To perform a Hard Reset:
3. Start>Settings>Security>Factory data reset
4. Press 1234 and press yes
Caution: this process will erase all the information from the phone memory
=========================
and that is the solution, don't use auto scan because there is no auto scan with some devices
any suggestion
FM radio...
In Switzerland, everything's fine.
But I'm searching for another FM radio tuner (free of course) to replace the poor native that comes with HD2. Before I was using Power Radio on Blackstone but with Leo it doesn't work.
Does anyone know a good FM Radio (not Internet) for my little (I mean giant !) Leo ?
-----------
thanks and sorry for posting here
Related
Afternoon all,
This seems an excellent place for a new XDA IIi owner to start things off! Please forgive me if I repeat anything or if I am posting in the wrong place, just let me know and I will gladly fix it.
I'm just at this stage trying to get used to the XDA and add value to it by means of software and customisation to the extent I did with my P900 and P910i which I have been using for the past 2 years. In some ways I'm finding it quite hard to get my head fully around the XDA IIi?! I actually started out with the IIs a couple of weeks ago but found it to be way too unstable and too much of a problem so I jumped over to the IIi. So far things have been better but I have a few "things" I would like to ask in the hope that someone can help me.
Erm.. where to start...
1. Ok, O2 branding, the O2 active stuff and the icon in the title bar. Can it be removed? Currently my O2 icon is just a blank whit square, it never displays properly and just makes the phone look, well, pants!
2. The headset supplied with the phone seems awful! I get lots of complaints about volume fluctuating. Does anyone else find this?
3. Can you actually just turn the phone off?? If so... how?
4. When listening to music, I cant put the phone into "sleep" mode, ie turn off the screen whilst still having the music play. Is there a way around this?
5. I use AAC music files too, I have Betaplayer which obvioulsy plays them but I cant make the phone recognise an AAC file and associate it with betaplayer... is this possible? Currently I have to open the player then open the file.
6. Firmware. Gulp.
I updated my P9xx's regularly, not without issue I suppose though! Do you guys recommend regular firmware updates?
Currently I have:
ROM Version 1.10.00 WWE
ROM date 12/24/04
Radio Version 1.00.00
Protocol Version 1337.39
ExtROM Version 1.10.124 WWE
Any advice on f/ware would be greatly appreciated. It can be such an ordeal but if its recommended I would like to do it really.
There are more things but maybe I should be quiet now and see if anyones got any comments!
Any help would be gratefully received and as soon as I get up to speed I will put back into this forum.
Thanks
Fronty.
1) The o2 branding software can easily be removed. I myself have wrtten a couple of replies to this sort of thing and so have others. If you do a search for "o2" "activeUI" "remove", you'll find the steps needed.
2) I've only used the headphones for using the phone once or twice apart from the first XDA I ever had. If you go to start > settings > system > Microphone AGC and enable the auto volume, this may help. Noone's complained about my voice being too quiet or fluctuations since I got an XDA2, never mind the 2i I have now.
3) If you tap the network signal strength, there is the option to "Turn on flight mode" - this is phone OFF. More indepth explanation of this is included in the manuals you should have with your phone. If not, I believe o2 do a .PDF you can download from www.o2.co.uk/xda
4) If you're using WMP10 then I know what you mean. On the XDA2 I used to be able to select the Contacts button as "screen off", but whenever I try this on WMP10 on the 2i it won't map the button. I prefer to use a third party program called Pocket Player 2 from Conduits (http://www.conduits.com/products/player/). It's fantastic, highly customisable and the only drawback is that it's not free. Well worth the money though. And you can turn off the screen and map other buttons during playback.
5) Can't help you on that one.
6) I always update mine once the official update from o2 comes out, though I must admit I've presently got one from the Australian o2 comparable i-Mate. It's a slightly more stable ROM but is sometimes tricky to install. There are instructions on these forums on doing it - I followed them myself. Currently there are NO official updates for you to upgrade to; you are on the most recent o2 ROM. You'll soon know when one exists, if not already from the http://www.my-xda.com/xda2i_soft.html page.
Hope this helps, please post back if you need further help.
Cheers
Ant
hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas
I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!
Channels don't work.
in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels
ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+
mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.
Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?
Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.
unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!
The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.
tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.
bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.
I have had several problems with TomTom Navigator 6 (installed from HTC Touch Cruise CD). Using USA/Canada complete map purchased from TomTom.
History
1. The "Turn on sound" setting in Change Preferences does not stay set to on. Every time I start TomTom, the sound is turned off.
2. After a destination has been selected, the voice directions are incomplete. TomTom will say "After 100 yards..." rather than "After 100 yards, turn right". TomTom NEVER indicates what direction to turn in advance of the turn. It will tell you which direction to turn when you are at the point of turning, but never in advance.
3. I have a problem when selecting a contact as the destination. Click "Navigate to..." then "Contact", then scroll through my contacts and make a selection. In the vast majority of cases, Navigate to returns the address with the street number AFTER the street name rather than before it.
Thus TomTom returns:
Main Steet 134, Bryn Mawr
The address given for this contact can't be understood. Would you like to enter the address yourself?
All of my contacts are synced from Outlook/Exchange and are all set up correctly. This bug renders the Navigate to Contact fetaure useless.
First follow-Up
I finally got around to call TomTom regarding these problems and I am not happy with their response!
According to TomTom, the HTC Touch Cruise is not on their supported list. That's correct folks, not supported. Doesn't matter that it comes packaged with the TC, it's not supported. Blame HTC (they say) for including the license with an unsupported device.
The technician suggested that I downgrade to Navigator 6 V6.030 which supposedly addresses my issues. I did the downgrade and determined that:
1. The sound setting still is not maintained. In fact, it now required that I press Turn on Sound twice for this feature to work.
2. I am still not getting the complete voice response, only "After 1/8 mile..." No turn left or turn right. TomTom said I should reformat my memory card and reinstall app and maps and that MIGHT help. Well, I'm, not going to go through all of that unless I know it will work, too many other things on the memory card to deal with.
3. Navigate to.. Contacts now actually seems to work! But the ironic thing is that TomTom told me that the Navigate to... Contacts feature is ENTIRELY UNSUPPORTED even though it is in their software! They claim it was never completed and therefore not supported.
This is absurd. The hardware is not supported by the software that it was bundled with, and the software itself has features that are not even supported by the developer.
Second follow-Up
I uninstalled and reinstalled TomTom 6.032 from the CD. Also uninstalled and reinstalled the maps.
1. Default sound setting seems to have been fixed.
2. Still have the problem with incomplete audio directions ("In 1/8 mile...)
3. Navigate to Contacts also seems to be working though not tested extensively.
Am I the only user with this TomTom oddity? Why on earth will it not state the entire direction? TomTom has been no help, anyone here have any ideas?
I cannot say this for the US/Canada maps but for the Benelux/Western Europe maps, the directions are OK and I don't encounter your problem.
I'm using the default Dutch voice in version 6.032.
Try a hard reset and install tomtom again on the clean rom, see what happens with that.
German maps work fine, too. I'm using Lisa (as a speaker , who is more or less Tom Tom default I believe.
Sound settings are kept correctly.
Version 6.032
I don't have any problems with TomTom either.
IF you want to try some other voices, you could drop me a PM and we'll "arrange" so you can get them from me (got a package of many different voices)
Kimma said:
I don't have any problems with TomTom either.
IF you want to try some other voices, you could drop me a PM and we'll "arrange" so you can get them from me (got a package of many different voices)
Click to expand...
Click to collapse
I was preparing to hard reset my TC (last resort) when I figured that there was nothing to lose by changing the voice. I did, and it worked! Never would occur to me that the voice selection would have any impact on this problem.
But, unfortunately, the problem with keeoing the default sound setting has returned. Each time I start TomTom, the sound is off. ARGH!
Anyway, thank you for steering me in the right direction. Hopefully this one issue is now put to bed.
Nice to be able to help
maybe you could be so kind reading my thread and answer it? (since it seems i'm the only one in this forum that actually owns a TC *cough cough*)
http://forum.xda-developers.com/showthread.php?t=382568
I get exactly the same problem with the sound. I have an XDA Orbit II, sound in TomTom always off, have to keep changing it, removed it, I use Co-Pilot and Navigon now, both are great.
RE: Sound problem
I have the same problem with the sound and it was bugging the hell out of me too. Speaking to a friend of mine who has the same problem, apparently it is due to a known bug in the current TomTom release: If you have a data connection open when you start TomTom, it thinks you are in the middle of a voice call and mutes the sound. My friend also informed me that there should be a new release from TomTom soon that addresses the issue. I don't have any links but there may well be another thread somewhere on this forum about it if you search.
The sound on my TomTom will occassionally turns itself off and requires it to be turned on TWICE to work again. I think its a known bug. The problem used to be worse on my P3600/Trinity.
Update- from the kaiser forum http://forum.xda-developers.com/showthread.php?t=330235
It's a bug, you have to switch off the data connection before starting TomTom.
SIMPLE FIX: Roll the volume wheel and sound turns on.
Click to expand...
Click to collapse
might also work on the Trinity?
My friend also informed me that there should be a new release from TomTom soon that addresses the issue
Click to expand...
Click to collapse
Sure? Rumour has it on GPS-specific forums that TomTom are not actively working on updating Nav6 (for PDAs) because its too much like hard work; much more revenue in (simpiler) dedicated units which are more stable
peace2make said:
I have the same problem with the sound and it was bugging the hell out of me too. Speaking to a friend of mine who has the same problem, apparently it is due to a known bug in the current TomTom release: If you have a data connection open when you start TomTom, it thinks you are in the middle of a voice call and mutes the sound. My friend also informed me that there should be a new release from TomTom soon that addresses the issue. I don't have any links but there may well be another thread somewhere on this forum about it if you search.
Click to expand...
Click to collapse
Interesting. Prior to launching TomTom, I used Comm Manager to turn off the data connection. When TT launched, sound is indeed on! When sound is off as a result of an active data connection), using the volume slider on the TC does not turn the sound on. Seems like the only way it to go to settings and select Sound On twice.
Hopefully TomTom will correct this bug. May also try downgrading to 6.030 to see if that works but I don't know what features I'd be losing (if any).
Hi, just bought a new car equipped with kenwood kbd bt6544u car stereo.
I succesfully connect my diamond with, but all my contacts doesn't remain on the radio after downloading and I have to resync everytime I switch off the radio, except for the quick call saved presets. I wonder if this is the normal behaviour or something is wrong. Can someone explain me how is the kenwood logic so maybe I understand how to use it properly? tks in advance brgds
hi,
I'm using my diamond with a kenwood KDC-BT8044U and I also need to sync every time but I think that this is normal... I've never seen a car stereo equipment which saves the contacts in a permanent storage... it doesn't need a lot of time and it works automatically, so...
regards
ps. If you get it work let me know how
Maybe there's a logic behind: if you connect with different phones you'll mess up all the contacts so maybe this way is better. Just this is not clear to me: when I get into the car the car bt connects but does anything, AFTER a phone call the contacts are downloaded (and sometimes hangs on downloading...). Is this also for you?
best regards
boglll said:
Just this is not clear to me: when I get into the car the car bt connects but does anything, AFTER a phone call the contacts are downloaded (and sometimes hangs on downloading...). Is this also for you?
best regards
Click to expand...
Click to collapse
I have the KDC-BT8044U and I don't have this problem, as soon as it connects the contacts are automatically downloaded.
I have another problem, perhaps you can help me, the downloading from my HTC Touch HD WM 6.5 EnergyROM (14.06.09) takes extremely long for me (approx 5min30sec). I find it very annoying because during this time I can not make any calls.
How long does it take with your phones? I tried with a iPhone of my friends and it only took a few seconds.
Why is this taking so long for me with only 78 contacts?
Please help
well, I noticed that if I have the phone on (I mean screen on) when I connect, the download starts immediately, otherwise it starts after minutes and is extremely slow... Download time is about 60 secs, I had longer download time (also hangs) when I had a specific contact on my phonebook. After removing it problem solved... I found the "guilty" because activesync was unable to sync the specific contact. Hope it helps!
Hi, I also have a Touch HD and a bt-8044u. I can't seem to answer calls or dial calls from my head unit. Does anyone else have this problem?
My headunit also downloads each time it is connected!
freeflyer2006 said:
Hi, I also have a Touch HD and a bt-8044u. I can't seem to answer calls or dial calls from my head unit. Does anyone else have this problem?
My headunit also downloads each time it is connected!
Click to expand...
Click to collapse
yes I have the same problem, see here:
http://forum.xda-developers.com/showthread.php?t=554785
go to this post, and tell what ROM you are exactly using, perhaps, if we are 2 we can get more help
I upgraded to BsB wm6.5 rom one week ago and since then all is smooth as silk: immediate connection, fast download, no more troubles!
I also use htc touch HD on BT8044U, but i can't sync sms, anyone can do this?
fedux83 said:
I also use htc touch HD on BT8044U, but i can't sync sms, anyone can do this?
Click to expand...
Click to collapse
nope, it's not available for the touch hd
Touch Diamond & Kenwood DNX7240BT
Initially had problems with these, sorted now.
Upgraded bluetooth (from Kenwood's site) but didn't help.
Next I erased pictures attached to phonebook entries and deleted ALL call records (these things store thousands of calls made, received or missed.) Now, it only takes about 6 seconds to show the entire phonebook is present on screen.
Shame the SMS won't work, yet. maybe in the future.
Hi all,
I have been looking at buying this head unit, and it would be great if you could answer the following:
I listen to a lot of audio books and would like to know that if you are listening to a track and switch the radio off, does the radio remember the track you were last listening to AND the position within the track.
It would be very annoying if the system flipped to the beginning of the track everytime....
Also does the headunit support streaming via bluetooth I have a TYTN II.
Thanks in advance....
When listening to music on a cd, playback resumes from precisely where it was prior to switching the ignition off.
I've never tried an audio book though so can't comment, sorry.
Audio streaming works fine over bluetooth (A2DP,?)from my Diamond.
H.T.H.
same problem here:
touch hd (xt grid evo 1.7)
kenwood 8044u
after every HF Connect the download starts.
The download needs about 5min then...
I have 95 contacts with ~150 numbers in my contactlist
No pictures, and all numbers as +49 123 456789
is there anything to get the download faster?
thx
Yes.
Delete all call records (in, out and missed) and text messages.
Mine had over two years worth of records at one time !
Whichever tweaking programme you use, set up a maximum list of 10 calls missed, made and received. This will prevent the list building up again. (I use 'Advanced Config' on my Diamond for this.)
H.T.H.
that's it
just deleted the history and then download nedds about 15sec now
Thx!
Is there an registry entry to set the number of saved entries?
I wish to diasble that at all for privacy reasons...
You're welcome, glad it worked for you.
Although there will be a way to limit the entries in the registry, I don't know it, sorry. If you download 'Schap's Advanced Configuration Tool' (available in this forum), it can do that and loads of other useful settings too.
I also set my phone to display only its internal phone book and not the sim contacts, which halves the number transferred to the Kenwood. This was also done from within the 'Advanced Config.' tool.
For best results, alter the number of entries for SMS messages, too. (again dead easy with the 'Advanced Config.' tool.)
My TD2 connects, syncs, but I can't hang up or establish a call by myself. Answering calls works fine using the control knob. Any suggestions?
HoPi,
I don't think your phone is supported, yet.
See, http://www.kenwood.com/cs/ce/bt/index.php for a compatibility list.
Keep an eye out for updates. When I first bought my headunit, there were 3 downloadable updates within the first few weeks.
HTH
Whoops, haven't seen that list. I just checked the local (german) version which only offers a PDF file (with 2 HTC devices mentioned). Seems like I can be glad that the phone works half-way. Thanks!
Hi all,
I just bought the Kenwood KDC-BT50U for my car. I plan to use it with my HTC Desire via Bluetooth, mainly to play my mp3s. It paired and plays mp3s just fine, but it does not show the track names on the device and I cant skip tracks. It also does not sync my contact names from the phonebook, except for the call history.
Did anyone get it to work, and if yes with which firmware? the kenwood website sucks and they do not list the htc desire on their firmware update pages..so I have no idea which one to get...any help would be great!
I've got a BT60U and a Desire and it works all fine - it didnt in the beginning though.
My problems were that there was no adressbook sync and that I got random disconnects while driving.
But at some point it just started working. I remember that it was around when I started rooting (the first hacked 2.2 on the Desire) and then later the first AOSP roms. Dont know what made the deal for me but might be a hint.
At some point I also did a complete reset of the headunit.
I know it is a bit vague but I'm running fine with the BT60U (which got the same BT kit as yours) and my rooted Desire running DeFrost 6.1 (but also with OpenDesire and MIUI, don't know about Sense Roms though)
EDIT: forgot to mention: It is normal that the head unit doesn't show track titles etc but the forward/play/pause keys should be working...
What you can try is that you delete your phone from the BT50U's Bluetooth menu (at least mine got an option saying 'Delete BT Device') and deleting your Kenwood on your phone to start it from scratch again.
Hi.
Which number firmware of bluetooth unit is it?
I had the V 3.11.0 but the last is the V 3.12.0: this add the only forward/play/pause keys but doesn't show the track titles (in fact the A2DP protocol doesn't support this).
To upgrade it: manual, software, firmware (or go here and select "HTC Tattoo").
It's very simple to upgrade but, if you can wait, during this week I'm uploading a video about it: I did it last weekend.
Unfortunately, this last firmware doesn't resolve any problems like doesn't sync contact names from the phonebook neither the call history.
Moreover I can't use the "red button" because it kills the app "phone" so I have to reboot or enter again my PIN code.
I have a Wildfire with Froyo 2.2.1 stock.
Bye.
! !
Ps.: my unit has some problems so I have to bring it at assistance.
It's normal that there is always the "FAV" icon at top right of the display?
Thank you.
The protocol for track names is AVCRP rather than A2DP, but unfortunately the result is the same, the bluetooth stack in Android does not appear to be 1.4, rather 1.3 which doesn't have the feature.
Do you have an import via bluetooth option on your Kenwood. At first my JVC wouldn't sync and I just had to export the cantact list and then use a bluetooth transfer app to transmit it across manually. One day it just started working as mentioned above.
@400ixl: there is an automatic sync of all datas every time that the phone connects to the Kenwood radio but with Android it doesn't work, unfortunately.
I hope there will be an another Bluetooth firmware upgrade.
Thank you.
Bye.
! !
I uploaded a short video about the upgrade.
If you would like see it, I'll write the link.
Bye!
! !
thanks very much
Video.
Bye!
! !