after i flash my htc 3g to a new ROM, i get stuck on the align screen.... ==
and then i try to create a "welcome.not" file on my storage card, and after that i manage to get through the welcome page to enter my window...
but now the problem is.... the sensor on the screen is not properly function.... is like, when i press number 2, it appear as number 8, is kind like upside down, and yet not fully coverage....as there is some place below do not response at all....
and then i try to use the "remote screen alignment" to lauch the "align screen" via my pc....
but now the problem is.... i cant get through the align screen.... ==
jz like before, i follow the instruction properly, but it jz keep repeating the align screen pages.... i get stuck there....
kind of frustructed....
can someone help me???
ps: my screen got no problem!!
sorry, problem hv been solved!! thx ^^
Related
Hi,
I've just received my TyTN today and I'm not very satisfied concerning the touch screen.
I don't know what is happening but the touch screen does NOT respond properly. I've tried to clean it a bit, but the result remains the same.
When I want to use the screen keyboard, it's horrible. I point the letter A and the screen understands that I'm touching the letter under or the letter just near the "A". It's pretty impossible to write a text properly and very hard to open programs or browse with the touch screen.
Of course I've tried to align the screen. It's working without any problem then.
But after some times, opening apps, closing others (using normally the pda inf act), the problem comes back... the TyTN does't really understand where I'm touching the screen.
Then I make a screen alignement, and it's working back... It's just amazing
I don't think it's a hardware problem because the alignement is working after an align screen.
Maybe it's a known error ? Has somebody the same problem ??
Is there a rom update to fix that ? Or is it a problem of my own HTC ?
Thanks !
Can you help me please ?.
Hi,
I don't have this issue with mine...
Check the "TnTN/v1604 problem" topic maybe
I had the same thing, once, with my variO. Probably I pushed too hard onto the screen while cleaning.
Actually, this is a known problem with some of the first shipment devices. Look at the other TyTn topics i this forum.
I've got a MDA which has a broken lcd. Its just cracked slightly, but still displays fine. I did a Clear Storage and now the phone has reset and is giving me the "tap here to set up your device" wizard. I need to bypass this and any screen alignment that may come up since the LCD touch feature no longer works. I've done it before when I got the phone, but I cant find the thread nor remember the steps.
Any help is appreciated.
you really can't. i heard theres a way you can flash a rom where the config has already been done, but i don't remember where i saw it
fzzyrn said:
you really can't. i heard theres a way you can flash a rom where the config has already been done, but i don't remember where i saw it
Click to expand...
Click to collapse
create a file on the root of your storage card called welcome.not
TylerC161 said:
I've got a MDA which has a broken lcd. Its just cracked slightly, but still displays fine. I did a Clear Storage and now the phone has reset and is giving me the "tap here to set up your device" wizard. I need to bypass this and any screen alignment that may come up since the LCD touch feature no longer works. I've done it before when I got the phone, but I cant find the thread nor remember the steps.
Any help is appreciated.
Click to expand...
Click to collapse
I believe this should help you.
http://www.freewarepocketpc.net/ppc-download-my-mobiler-v1-2.html
At least I hope it does.
Just create a file named WELCOME.NOT on your storage card and do a hard reset.
HI , I had this problem with all my old crashed PPC ,,, so delete this file and reboot ,,, /Windows/Startup/Welcome.exe
U can use the "Activesynce Explorer to browse the Windows Directory
Enjoy..........
use "Remote screen alignment" tool and bypass your start screen easily. search this tool in forum. you will get it easily..
Regards
welcome.not and http://www.freewarepocketpc.net/ppc-...iler-v1-2.html
THANK YOU SO MUCH kfletch and le_cactus. I'm not sure which of these worked since I did both but the welcome screen FINALLY went away. it took a while. i had to install the Mobiler software and I had problems getting my ActiveSync up but I created the welcome file by going to the desktop of my pc, right click, new , text document, i changed the default name "New Text Document.txt to Welcome.not" then I right clicked to copy it. Next---Once the Microsoft Activesync came up, I clicked on Explore --> My Windows Based Device ---> Storage Card then I selected paste to paste the welcome.not file. After this it gets a little tricky because your device has to sync again to filter the file back down to the phone. This took a while. Then after a few resets, the Mobiler software finally read 'connected', then it gives you a screen shot of your mobile device, i did a soft reset a few MORE times and it worked. It's not as cut and dry as previous posts made it sound. it's a pain in the butt.
My touch screen (T-Mobile Wing) stopped working after I used it in the bathroom while in the bathtub (I don't know what the heck I was thinking), well later that day the screen stopped working and the genius at tech support had me do a hard reset and software upgrade, which did NOT help. (whatever you do, don't call tech support, especially if the white dot beneath the battery is another color---you're screwed!!!)--AFTER tech support messes up your phone they won't bother to help you if they think it's due to water damage! I'm going to see if I can locate the forum regarding reloading the touch screen drivers. I think that may be the problem.
thanks dear I try i350 gSMART and working.
how do you select "YES" when mymobiler tries to install on the phone?
my screen is also broken, and i bypassed the welcome screen, but when i tried to install mymobiler, i cannot let the phone install remote.exe
any help?
this is ur answer
go to this its my room iam build it and not have align screen
http://forum.xda-developers.com/showthread.php?t=546422
Thanks a lot folks from XDA! I had screen broked and this works just fine! Cingular 8125 WM5. tks
ah_hin said:
how do you select "YES" when mymobiler tries to install on the phone?
my screen is also broken, and i bypassed the welcome screen, but when i tried to install mymobiler, i cannot let the phone install remote.exe
any help?
Click to expand...
Click to collapse
Buy a not broken screen
HTC TYTN(Hermes 200)
Hi there i have an HTC TYTN, happens that i'm suposed to have the same problem (maybe broken screen).
The phone was working fine untill today.
I can't bypass the screen alignment; i tryed both ways.
What can i be doing wrong?
Thanks in advance.
Bypassing with "logic"
Hi there;
In my case; i found a way to bypass it.
My screen has a 4mm scratch in the top left of the screen.
so i just pressed the bottom of the cursor (NOT IN THE MIDDLE WHERE IT'S SUPPOSED TO PRESS - "in the top left cursor" - where the scratch is)
after that i could use my phone again.
Also after this try finding the correct registry screen alignment and save it.
It will work properly.
welcome.not works for TyTN II with unresponsive touch screen . Blank micro SD card with just one blank file welcome.not. You can insert the sd card just before you hard reset
It worked in OMNIA II and passed the screen calibration..Thanks a lot guys!!!
hi all
i got a magician from a friend to play with but when i got it i only saw it starting up and then by align screen it would boot further
ive went to the wiki and checked ive i could find the combo for hard reseting this phone(whitout succes) i managed to find how to get in bootloader so i checked it
when i go in the bootloader my screen doesnt light on(is this normal because my other devices do this)
further it says v1.02 on the bottom of the screen
now ive tried to insatl the dutch t mobile rom from the wiki but i get a connection error
now ive seen that updating this phone doesnt go like on a blackstone\rhodium and it has something to do with a sd card in it?
i have the gap for sd card but not one in it(is this nessacary?)
after the connection errors i cant even see the align screen anymore it goes straight to bootloader when i press only the on button and getting out the battery for a minute and put it back in also brings me to the boortloader when i press the power button:S (now its working and i can get to align screen again:S)
can someone please help me fix this phone
best regards mini
You have Rome. You need from T-Mobils Rome:
- ms_. nbf
- nk.nbf
- radio_. nbf
All that in the folder suspended below copy. The device in the boat mode bring (On top the left and right key + power) Then you are able to do him flashen.
thanks for the reply
got a exe file to use but going to try to extract it when im home and hope i get those files from it
stil not working
tried it a couple of times but i always get this message
btw in bootloader it says v1.02 on the bottom
and strating in bootloader doesnt work at all for updating because the program doesnt see the phone:S
i have to get it started up to the point of align screen then connect it to comp with activesync
then i got those screens
when i start the phone i see the next things on the phone in spalsh screen
r1.12.00
g1337.42
d1.12.00
i dont have a memorycard in it dont know ive thats nessacary
best regards miniterror
one more with the back sticker so it really is a magician
If is a Magician. The mistake 101 means which does not fit the ID. What you can still try to protect your Rome and more than 416 bits, a Big Storage Rome to flashen. You can make this everything about memory map. You find instructions here.
ok i dont get it at all so i'll throw away the phone
thanks anyway for trying to help me
after i flash my htc 3g to a new ROM, i get stuck on the align screen.... ==
and then i try to create a "welcome.not" file on my storage card, and after that i manage to get through the welcome page to enter my window...
but now the problem is.... the sensor on the screen is not properly function.... is like, when i press number 2, it appear as number 8, is kind like upside down, and yet not fully coverage....as there is some place below do not response at all....
and then i try to use the "remote screen alignment" to lauch the "align screen" via my pc....
but now the problem is.... i cant get through the align screen.... ==
jz like before, i follow the instruction properly, but it jz keep repeating the align screen pages.... i get stuck there....
kind of frustructed....
can someone help me???
ps: my screen got no problem!!
sorry, problem hv been solved!! thx ^^
after installing window in i mate jam
there is align screen is coming
and told to scaning i am try to go ahead to this align screen but still there not gaing ahead plzz plz plz help abut this plzzzz plzzz
Plz Help Me Plzzz
hensaam said:
after installing window in i mate jam
there is align screen is coming
and told to scaning i am try to go ahead to this align screen but still there not gaing ahead plzz plz plz help abut this plzzzz plzzz
Click to expand...
Click to collapse
what do you mean.? i can't understand i BOLD it out hehehe, emphasize it clearly. . .
i have i mate jam
ok
i did install windows in i mate
after installed window there is align screen comes
which means u first scan on this screen there is come a pointer and tab it
and 5 hours 8 hours continue i am doing scaning but not coing ahead..
Hi,
which ROM you've tried to install?
So long,
MrFX
hensaam said:
i have i mate jam
ok
i did install windows in i mate
after installed window there is align screen comes
which means u first scan on this screen there is come a pointer and tab it
and 5 hours 8 hours continue i am doing scaning but not coing ahead..
Click to expand...
Click to collapse
maybe you have a digitizer problem (i.e. the touch screen sensor) , check up your device.
Remote Screen Alignment by code factory
If the alignment program is the problem, try using Remote Screen Alignment by code factory would help you bypass the alignment screen.
Sometimes it is not a sofware issue,
Had it before when my unit fell and the connector from the lcd/touch screen came a
little bit loose. If you have the nick to open your unit you can tighten it up with a little
cleaning using eraser and then put it back snugly.
Huuum.. Still the same issue
Ok guys.
So i have a magichian with a broken LCD and i just updated to the most advanced Cotulla's rom version.
the issue now is that the Remote Aligment tool is not working and SoTi Remote tool will not install.
Do i realy have to downgrade to wm5 until i get the screen fixed?
Because with the wm5 both mentioned tools work.
Many Thanks
hensaam
hensaam
this fault is not your Rom.
that is hardwear fault.
Clean your display riban path(oxide)When you can Fix this fault.
Sorry for my bad english.