Hello,
my problem is that when I soft reset my device then the SIM PIN screen comes up for a second and then disappears and the phone starts loading TouchFLO. After that it also doesn't come up. I have to open Phone to get to the PIN screen and log me onto network.
Any idea how to fix it so that the phone asks me PIN code every time it boots up?
Thanks.
I've got the same problem.
But it's much easier to turn the phone on. Just press the "green" button on your phone and the screen where to fill in the PIN appears.
I know, it's not a real help, but it makes life more comfortable
Hope I could help you...
Update your rom to another one, some of the original 6.5 builds did this, but most roms have been fixed now.
Related
hello,
friend of mine bring to me one MDA Compact with the following symptoms
-the unit do not power on - when insert bat. -just sound "PUK" is heard
-when try enter boot mode - same sound "PUK"
-hard reset /soft reset not possible too again sound... "PUK"
all that happen after using xda2unlock, he try to unlock network lock
the unit is from T-Mobile, and he said so: "on screen was shown xda2unlock.. then software start to work...but seems not success becouse i waited much time and only ..................................................... was shown on screen, then i removed the device from cable and pull out bat"
any chance to alive it? to enter boot mode somehow via hardware modification?
or any idea what can be wrong with that unit?
thanks
Typically you need to contact your operator to get a PUK code. I think it is a sim lock. try removing the sim card.
@mitchello
LOL! I think that 'PUK' was the sound that came out from the unit, not a SIM Puk request !!
@dsimka
By the way, are you able to reset the unit to Bootloader Mode (Power+camera+reset) ? If yes you may want to try to reflash the unit with the original or a newly released ROM. That *should* solve your problem.
Cheers.
hrm
MDA compact work now...
the problems was that back panel was not closed
seems if battery panel not closed - unit does not power on
simple, but ...
Muahahahahahaha
Just like a problem with computer, when it does not turn on and shows black screen. The solution - plug in the power cable
It can sometimes be that simple.
This swf is quite funny, and sooooo true!!!
Greetings,
I just upgraded to the 2.02.00 ROM last night but still have the occassional lockups. I need to do a soft reboot to get the phone to respond. I believe when it locks up, the radio is still running since I see the blinking Green LED for the GSM. I have to switch off the POWER MANAGEMENT option of "Turn off in x min in not used" for battery power to be able to use the device for calls. The only level of battery saving I am stuck with now is the Backlight auto-off and the beam settings.
Is this something others are having as well or are any applications the culprit?
Thanks in advance for your assistance.
Regards
BHAMEED
------------------------------------------------------------------------
I-Mate JASJAR
--------------
Windiws Mobile 6 (CROSSBOW)Jwright
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
CE ROM Version : (2.02.00 WWE)
RADIO Version : 1.13.00
ExtROM Version : (2.03.05 WWE) UNLOCKED
Bootloader Version : ver 2.01
Try the power button
All buttons..including the power button...no response.
try holding down the power button
or setting the backlight to atleast one notch.
Urm... uh... ah.... eeee... aaaaaaaaaaaahhhhhhhhhh.
I can confirm this behavior on my MDA Pro (G3).
All ROM versions the same like Bhameed's on my MDA, ...except bootloader of course.
Anyone else noticed this on 2.02.00?
Hold on, can you guys be more specific with this? Are you absolutely sure it doesn't come back on when you PRESS AND HOLD the power button??? Really sorry if I sound like I'm being pedantic, but just from what you've written it sounds like you don't know how to turn on the phone???
hahahaHAHAHA!!! awesome reply spyder
ok, yeah i was thinking this is an issue of not being able to turn on your phone.
yeah what's going on that was different from before?
There have been only few moments where you think "Surely not"... I hate those moments, I'm just hoping this isn't one of them! If it is a genuine problem it's pretty serious and needs to be addressed, but if not.... well, I don't think I should say much more
Please please please say this is all a big joke. I'm tired, please excuse me.
I confirm this behaviour!
And more!
My Qtek freezes... freezes... and then PUFFF. Dead.
I wait some minutes (30 minutes) and I can turn it on again.
I'll send it to qtek.
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
SpyderTracks said:
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
Click to expand...
Click to collapse
Mine freezes everywhere. Bootscreen, Pin code menu (when u type your pin). It depends.
then pda doesn't turn on.
Many problems.
Just go to the assistance. :\
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
aniel1 said:
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
Click to expand...
Click to collapse
Again, I don't have this problem for some reason... I get very few freezes at all.
I think we're getting away from the original point of the post though... and normal freezing is well documented in most OS threads with means to prevent it.
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Bhameed said:
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Click to expand...
Click to collapse
And then you don't have other problems? Like freezes?
EDIT: I flash the original rom but the problem still here
I wonder if this could be a memory leak like someone suggested.... I'm sorry guys, I haven't experienced this problem, and I haven't seen any posts about it until this thread, is there any chance you guys with this issue can keep an eye over your memory status over say a couple of days to see if there's a leek and keep us posted? Once we find out what the problem is it should make a solution easier.
I experienced this problem as well using a cooked WM5 ROM on my HERM200 the only fix I found was migrating to another ROM. I'm currently using CUSTEL_Cing_v1.3, the battery life sucks but I love WM6, it is so much faster, I'm still tweaking and trying to resolve some other issues but other than that I am quite happy with it.
If you are experiencing the lockup I would suggest moving to another ROM as an option, that worked for me. Although a clean install usually fixes a lot of problems.
Hi everyone,
Im facing a very unique and highly irritating problem on my phone. I own a HTC P3350 (Love) handset with a built-in WM6.0. It was working fine till yesterday. Suddenly since this morning whenever i switch on my cell or get a msg or miss call, the dialer screen comes on. (Its as if the green dialer button is stuck, i checked if thats d problem, but that isnt the case).
I even restored my registry and stuff from an old backup i had made. Even that didnt help.
Is it a hardware or software problem? What should I do about it?
All suggestions are welcome. Please help me.
Welcome to forums
Perhaps a hard reset could help
Good luck,
@orb3000: i tried hard resetting too, twice actually. But the problem wasnt solved. Any more ideas??
another thought crossed my mind. What if i assigned some other action to the dialer button and see if it still persists?? i can then rule out if its the hard button problem.. Think it'll work??
The best way to know is testing it!
And what happen if you remove your SIM card? problem persists?
Ya it persists even if sim card is out. Im so frustrated that i'll start plucking my hairs in some time. If a msg is open when i switch it on, it starts dialing d no automatically. Its so damn problematic.
Will the company repair or do something about it? Its 8 months old..
Could it be a virus??
Sorry I dont know what else to recommend, but hopefully another more experienced member can give you better advice.
Be patient!!
oh.. thanks all the same..
can u do me a favour and try to boot the phone up wth the headphones plugged in???
no that didnt work either,,
i just hard reset my phone and i have removed the storage card from the slot. i have not restored from my backup nor have i synced yet. my phone is as good as new with no contacts or appointments. And now the problem has disappeared!! But that doesnt help coz at some point of time i'll have to restore my device which might bring back the problem.
are you using the ones that came with phone and do they double up as handsfree
my line of thought as i had a kaiser with a headphone fault were the wires that made the button to call work were faulty
this meant that everytime the headphones wires were twisted a certain way the dialer kept popping up and dialling numbers
so thgere fore if ur handsfree was connected and then the phone came up without dialer this would mean that there is a hardware fault
my only suggestions now is to flash to a different rom
if the problem persisits then its a hardware fault and youll need to contact vendor or seller
i just hard reset my phone and i have removed the storage card from the slot. i have not restored from my backup nor have i synced yet. my phone is as good as new with no contacts or appointments. And now the problem has disappeared!! But that doesnt help coz at some point of time i'll have to restore my device which might bring back the problem.
Hi everyone. Thanks for all your suggestions. But none of them seemed to work. I'll just write my problem in detail once again:
My phone - HTC P3350 (Love) with WM 6.0
ROM version: 3.17.720.3 WWE
ROM date: 21/01/08
Radio version: 02.94.90
Protocol version: 4.1.13.44
ExtROM version: 3.17.720.103
My exact problem -
1. Whenever i bring back my phone from stand-by mode by pressing power button, the green call receive button somehow gets pressed from the 'inside' and depending on what window is open the action takes place. For eg: if im on my today screen, the dialer screen opens up; if im on the dialer screen, the last dialed no starts getting dialed; AND THE WORST PART - if someone calls me when my phone is on stand-by mode, the call automatically gets received (coz the green cal receive button virtually gets pressed)!!
2. The super-added problem is that if i press the power button to put the phone into standby when im talking to someone, the speaker phone gets activated and then exactly 3 seconds later the call hangs up.
The problems are so weird and 'funny' that im getting to think its a virus doing all this.
What i tried doing -
1. i hard reset my phone and restored using sprite backup. The problem persisted.
2. So next i hard reset again and restored using PIM backup and restored only the contacts. The problem disappeared for a day but reappeared.
3. So i hard reset again and this time i didnt restore and i also removed my storage card. And now the problem has become unpredictable! It appears sometimes and sometimes the phone is completely normal.
Im trying hard to find a pattern as to when it appears for eg: whenever the battery is low; only during the evening, etc. I dont know but i've not found out any fixed pattern (which i expected if it was to be a virus)
My current status -
I disabled the 'Turn off device if not used for' option in Advanced Power settings. And i never put my phone on standby. I just use the device lock option. But the problem is that battery running out twice faster.
This has just temporarily treated the problem but the basic problem still remains....
hi.I have some problem with my htc hd7.
Its second time that I face with this problem.
when I tap phone in my device a black scren appear with the word loading...
and after a while the screen come back to main page,and phone wont open.
I cant open part phone ,to call someone.
help me with this problem plz.
Not sure I understand the problem correctly, but is that the only thing not working/loading ?
Possible things to try: shutdown/restart phone; remove any application that might affect calls; if all else fails do a Reset.
try this: turn of phone (shut down), remove battery few seconds, insert battery, turn on phone...
Hello All,
Basically what happened is this:
I got phone D6603 with "Vodafone protect" lock on and owner gave me a possible code for phone. I replaced screen and then found that lock requires only numeric pin, not what I was given. So, he then reset pin and deactivated lock, but I still had it on no matter what. So, I tried to flash new firmware into it for same phone and got it done, but now phone screen stays black all the time with only backlight on. Phone seemingly loads something (probably the new phone welcome screen after flash), which I cannot see, but when connected to computer from fastboot or something then all system files are visible.
When I boot phone from off position, it boots to a point where I can use side button to switch on and off the screen but touch does not respond because nowhere it reacts to touch or maybe I do not know where and what to click on screen.
What could be the likely solution? I do not think that phone is bricked, but something is wrong with system as it does not light up the screen properly. I tired flashing 2 times successfully with same result.
Any advice would e appreciated.
Hi, can this thread be deleted because I am getting phone swapped and thread no longer relevant? Thanks.