Database Info

Need Help with my Qtek S200. It is frozen!!

Ladies and Gents - Hi!
Dunno if you can help me but my Qtek S200 is freezing when it starts up. I have tried....Really. I have been through this forum to try to find solutions to my problems. The phone was a swisscom phone when i lived there and has additional Swisscom software on it. But when I did once hard reset, it had normal Qtek stuff on it. Anyways, that is for background purposes.
I got so far as follows trying to revive my phone.
a) When I switch on the following numbers come up:
"IPL 2.09.0001
SPL 2.09.0001
GSM 02.07.20
OS 2.9.7.24"
The screen then freezes!
b) I therefore tried a hard reset....Photo and Comm buttom depressed and a stylus reset. Phone says -
"Press send to restore factory default, Other keys to quit"
....which I do... I press the green send button.
Phone says -
"Formatting FAT partition Format is completed!!"
....again, up comes the same screen as mentioned in a with same numbers and all!
c) So - I press the photo button and the reset to get the red/green/blue screen.
Phone says -
"IPL 2.09.0001
SPL 2.09.0001"
I plug my cable into the computer and plug the cable into the phone. Bottom left hand corner says "USB".
At this point I suppose I should "flash" my phone. Cannot figure out how that is done or even what it means. Tried to find .exe files on the QTEK CD I got with the phone but there seems nothing I can flash the phone with.
This is as far as I can get. Wish I can revive the phone and if I can upgrade the OS software that would be just wonderful!
Please Help (In non technical language as I get lost in the jargon)
Thanks in advance for your replies!!!
Jim

Also, if I may add, the cd does not seem to have any 'system' software on it and will only let me repair damaged programs on my computer. CD is the microsoft Qtek CD with windows mobile 5.0 PPC Phone edition GSM w/outlook 2002. Is that what I need coz its the only cd that came with the phone.....
Thanks again!
Jim

after step (B),wait....it takes some time...

tonydeli7 said:
after step (B),wait....it takes some time...
Click to expand...
Click to collapse
Thanks Tony.
It seems to freeze after step B. 30 mins and it will not change. And it comes up with the swisscom welcome page..... just as though the format of the FAT never happenned.
Jim

So! just for the sake of it I tried again since my last post. Not a thing the phone was and remained frozen even after my format of the FAT. That is almost 2 hrs waiting.
Jim

jimboy said:
So! just for the sake of it I tried again since my last post. Not a thing the phone was and remained frozen even after my format of the FAT. That is almost 2 hrs waiting.
Jim
Click to expand...
Click to collapse
flash a new rom.. The AKU2.2 no vendor(NVID) rom link,is posted in the WM6 Upgrade.go there and download it...

tonydeli7 said:
flash a new rom.. The AKU2.2 no vendor(NVID) rom link,is posted in the WM6 Upgrade.go there and download it...
Click to expand...
Click to collapse
Erm... this is where I become computer illiterate! Where do I find the upgrade and what exactly is flashing? Is it running an executable code when fone is in bootmode and it will do all itself?
Thanks
Jim

Step by Step Instructions...
http://forum.xda-developers.com/showthread.php?t=310452
You dont need to flash up to WM6.... but this should help you to atleast flash up to aku2.2

jimboy said:
Erm... this is where I become computer illiterate! Where do I find the upgrade and what exactly is flashing? Is it running an executable code when fone is in bootmode and it will do all itself?
Thanks
Jim
Click to expand...
Click to collapse
just enter bootloader and run the exe...

So I guess a word of THANKS is Definitely in order. The phone is up and running again with the files and the help that you suggested.
I have stopped the swisscom autorun from installing the swiss stuff on it as I am wondering if it is all the additional software including tomtom and rail timetables, translation programs etc that are filling the memory, slowing the pda and basically crashing it!!!
Again.... a big thanks for your help and support! I had already written the fone off.
Jim

Need help

I flashed my Qtek 9100
i followed the instruction
but now it freez in boot page
MY IPL 2.21.001
SPL 2.21.0lip
OS 6.1.1
Please need help

did you try hard resetting? press power on the top. and turn back on after a moment. then try soft resetting.

yes i tried it but stil freez in boot page
IPL 2.21.001
SPL2.21.0lip
GSM02.25.11
OS 6.0.0.1
please any help
MY PDA doesnt connect with my pc anymore

did you flash it right step by step? things should be alright if you did. if you did, try reflashing with different rom. hopefully you didn't cidunlock it wrongly.

No Free CID-Unlock for G4! Ignore what longjuanfeng say.
Now, get your Qtek stock ROM and flash it, then you will get your orginal OS back.
Then, get another WM6 ROM, HardSPL/SoftSPL your device and try flashing again.
I hope you didn't use ShellTool to flash your G4 device. As it is proven unstable. As you are using HardSPL, you should use RUU to flash your Wizard directly.

Hallo
Can you please Tell me where i can get my Qtek Rom?
When i turn the PDA on it Stay in the boot image Freez that all
but if i boot it into SAFE MODE i get 3 colors i think there is oplossing isnt it ?

cyberbot said:
Hallo
Can you please Tell me where i can get my Qtek Rom?
When i turn the PDA on it Stay in the boot image Freez that all
but if i boot it into SAFE MODE i get 3 colors i think there is oplossing isnt it ?
Click to expand...
Click to collapse
You need to read the wiki!!! The answers to all your questions are right here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard

Hello
thanks for the help
i have Tried to get the old image back
now my PDA start normal but it stay in one page Called Align Screen(i installed Love them before )
it Said ( Tap the Target Firmly and Accurately at each location on the screen, the Target wil continue to move until the screen is aligned ).
i have tried it like 5 times but it doesnt reacte like making joke with my self

cyberbot said:
Hello
thanks for the help
i have Tried to get the old image back
now my PDA start normal but it stay in one page Called Align Screen(i installed Love them before )
it Said ( Tap the Target Firmly and Accurately at each location on the screen, the Target wil continue to move until the screen is aligned ).
i have tried it like 5 times but it doesnt reacte like making joke with my self
Click to expand...
Click to collapse
Try to hard reset it and see what that does.
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, contintue to hold the two side buttons until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.

i did what you said i have seen formate complet FTA ect...
Now i get in the Windows Welcome Tap the screen to set up your Windows mobile based device if i click there i be direct to the same ex page with move the tap ect...........
i have notice my OS number has been changed from 6.0.0.1 into 2.0.1

cyberbot said:
i did what you said i have seen formate complet FTA ect...
Now i get in the Windows Welcome Tap the screen to set up your Windows mobile based device if i click there i be direct to the same ex page with move the tap ect...........
i have notice my OS number has been changed from 6.0.0.1 into 2.0.1
Click to expand...
Click to collapse
The screen still won't align? Is that correct?

yes it asked me to keep clicking to be algined

I would try this, post #3 is what you want to look at. Hopefully this will work.
http://forum.xda-developers.com/showthread.php?t=347539

Thansk so much
you saved my ass
it worked
but i just got email from reset factory emails
Here are your activation details:
Activated Product: Mobile Magnifier Pocket
Activation Date: 3/3/2008
Expiration Date: 4/2/2008
Activated Product: Mobile Speak Pocket
Activation Date: 3/3/2008
Expiration Date: 4/2/2008
what i understand that my Device will lock after one months in trial
How can i Active my Device?
And Also if i trired to Edit My contact it said they are locked and need to update the RADIO
nay help please?

Black screen with "Serial" Message

Hi
i was upgrading my XDA Pro from wm5 to Ranju_v77_WM61_19900_19900_1_0_2 rom, it say's it finshed Woth out fail but when doing a hard/soft reset it just gives me a bLANK SCREEN WITH SERIAL AT THE TOP.
Could anyone help me in restoring or Helping me recover to the new rom
Thanks
Moody

Sounds like you're stuck in the Bootloader - try resetting to Bootloader explicitly (Hold Power & Backlight keys while resetting) and connecting to your PC.
If it goes to 'USB', then you should be able to recover using the 'mtty' tool - connect it with USB, hit return a few times, and you should be seeing (on the mtty screen on the PC)
USB>
If you do see that, then do
task 28 55aa
The Universal Wiki contains more details, but that should restore the internal layout of your ROM, and you can then re-flash. It's probably worth resetting to bootloader again first...
Cheers,
PJC.

Thanks for your help,
i an a newby @ this is it possilbe for a step by step guide, also where could i get mtty form a link would be helpful...
Thanks
moody

Do a search for uni_exitbootloader....Download, unzip, and run the program with the device connected; it's worked for me everytime.
NOTE (for future reference): You should do a THOROUGH search of the wiki before posting new threads AND if a new thread is absolutely necessary, post in the section representative of your question...no hard feelings...

My Experience reject your SD , then press Light Button and reset for few second, maybe help

Absolutely death?

I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?

MaximKorobov said:
I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?
Click to expand...
Click to collapse
Go into bootloader mode (on/off button, light button, and reset hole all at once) make sure your sd card is out, and try to flash again with cotulla rom! dont forget to read his instructions to go back to normal roms and allow time for rom to set up, dont hard reset after you flash!!!!
regards
Jay

Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.

When my Uni is bricked I boot into the bootloader with the "Serial"-string. Then I put my SDHC out of the device and then it says "USB".
Every flash worked very well.

I can't force it to show "Serial"-string

Try this
Cotulla ROM is different.Memory allocation is different.
1.Remove SD card and always remove the SIM card.Very important.
2.First uncheck the 'allow USB connection' in active sync or WMDC[if VISTA].
Close active sync/WMDC in task manager.
3.Put Uni in BOOTLOADER.[Power+Backlight+Soft reset].
4.Run mtty.Click on USB.
5.Type 14 0 [ there is a single space between 14 and 0],press enter.
Wait ....
6.Type task 32 [there is a single space between task and 32],press enter
Wait....
7.Type task 28 55aa [ there is a single space between 28 and 55,and no space between 55 and aa],press enter
Wait...
8.When the desktop finishes the work..usually takes 5-10 seconds..close mtty.
9.Disconnect Uni...which is still in BOOTLOADER...
10.Go to active sync/WMDC and check 'allow USB connection'.
11.Flash with a WM5 ROM..I had KDSkamal's Ultimate ROM.
12.You should have got Uni back.
13.Then upgrade it to any ROM you want..6.0,6.1etc...if you want to.
Honestly speaking I don't know what the heck these procedures are,but if you do this STEP by STEP it works like a charm.
Cheers...waiting for your reply.

OK.
Now i know what to send Uni via mtty.
We have a solution to connect tools to device properly (mtty says "\\.\WCEUSBSH001 port can not open") after such crush?

MaximKorobov said:
Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.
Click to expand...
Click to collapse
Will it go into boot loder mode??

Please give info
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.

responderman said:
Will it go into boot loder mode??
Click to expand...
Click to collapse
In to hard reset mode (LEFT softkey + RIGHT softkey + RESET) - yes.
In mode, when it show "Serial/USB" connection - not.
kalya said:
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.
Click to expand...
Click to collapse
Look (It can be shown only with USB connection):
http://picasaweb.google.ru/Maxim.Korobov/RepairOfHTCUniversal?feat=directlink
And nothing else

Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?

The image you are showing us is "Hard reset" what you want is bootloader. you get boot loader as we described above, once you have it in boot loader it is easy to get your uni back. In bootloader it will say serial or USB if it is plugged in at the top and V1.01 or V2.01 or something like those numbers at the bottom on a grey unlit screen.

kalya said:
Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?
Click to expand...
Click to collapse
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
2. When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before;
responderman i can't send command via mtty cause it don't wanna to open USB port.

Man,I am no techie,but really want to help you.
MaximKorobov said:
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
Now,Forget mtty.
First PLEASE charge the battery 100%,use another unit if neccessary to charge.
You said When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before
What do you mean by that.
1.You cannot enter the bootloader
or
2.You don't know what the bootloader is?
And did you uncheck usb connection in AS,remove SD and SIM during MTTY....just to be sure
And finally PLEASE read this thread...It is really helpful..though old.
http://forum.xda-developers.com/showthread.php?t=259003&highlight=universal+dead+stuck
Click to expand...
Click to collapse

"1.You cannot enter the bootloader"
But now... it's funny miracle.
I try POWER+BACKLIGHT+SOFT RESET again and it's go into bootloader (previously - no, just empty screen).
5 minutes and new rom installed successfull.
Thanks you guys!
It was very bad half week with a brick.

Well i'm glad we got there in the end. Can I recomend reading up in the WIKI to get to know things a bit better. Welcome to the forum

Glad to help!
Good to hear that.
And yes please search,read wiki,and please please name your threads in such a manner so people can understand what it's really about.
And I am glad this thread can be closed now.

Windows Mobile 6.5 screen rotation problem

Hi everyone i have a simple problem\question that i hope someone could help.
When i rotate my screen i get a little UI bug, like a little square over the start menu button and i have to soft reset to make it disappear. This only happens when i rotate my screen (i'm using a hardware button for that).
Does anyone have a fix for this? It's very anoying.
Thanks in advance

Welcome to forums
It would be extremely helpful to know what HTC device you have

I'm a member for a while just never posted anything. I had a qtek s100 witch had the same problem.. one i-mate jasjar also with that problem, and now i have a ZTE Silverbelt witch isn't in this forum but it has wm6.5 so this forum still helpfull. All of them shared the same bug and i don't use the same applications i used when i had qtek's, so at least i think that the problem isn't app related.
Thanks

Problem with Mi htc3450 ,it does not start now more,please help mee!!!!!
I just installed Wm 6. 5, it worked about 10 minute then he started to reset, now it can open, I show the 3 colors but not write USB or rum, but IPL 2. 27. SPL 0002 and 1. 17. 0000, please help me!!!!!! ((confused:

Angellofgod said:
I just installed Wm 6. 5, it worked about 10 minute then he started to reset, now it can open, I show the 3 colors but not write USB or rum, but IPL 2. 27. SPL 0002 and 1. 17. 0000, please help me!!!!!! ((confused:
Click to expand...
Click to collapse
i think that this problem you have is result of bad flashing...etc . you made some mistakes during installing a rom...you can try to put that rom you have on mem.card and put card i phone ....( phone needs to be off,and without sim card.) press power butt and camera but and reset gumb with your styls...! you will receive 3 color display, and then it will say loading,then cheching ...and than finaly install by presing (just press power butt) after finish install press reset buton again...and thats it...! make sure to have proper rom radio..! rom installation is pretty much same as rom install...! i think i helped you...