Hi everyone i have a simple problem\question that i hope someone could help.
When i rotate my screen i get a little UI bug, like a little square over the start menu button and i have to soft reset to make it disappear. This only happens when i rotate my screen (i'm using a hardware button for that).
Does anyone have a fix for this? It's very anoying.
Thanks in advance
Welcome to forums
It would be extremely helpful to know what HTC device you have
I'm a member for a while just never posted anything. I had a qtek s100 witch had the same problem.. one i-mate jasjar also with that problem, and now i have a ZTE Silverbelt witch isn't in this forum but it has wm6.5 so this forum still helpfull. All of them shared the same bug and i don't use the same applications i used when i had qtek's, so at least i think that the problem isn't app related.
Thanks
Problem with Mi htc3450 ,it does not start now more,please help mee!!!!!
I just installed Wm 6. 5, it worked about 10 minute then he started to reset, now it can open, I show the 3 colors but not write USB or rum, but IPL 2. 27. SPL 0002 and 1. 17. 0000, please help me!!!!!! ((confused:
Angellofgod said:
I just installed Wm 6. 5, it worked about 10 minute then he started to reset, now it can open, I show the 3 colors but not write USB or rum, but IPL 2. 27. SPL 0002 and 1. 17. 0000, please help me!!!!!! ((confused:
Click to expand...
Click to collapse
i think that this problem you have is result of bad flashing...etc . you made some mistakes during installing a rom...you can try to put that rom you have on mem.card and put card i phone ....( phone needs to be off,and without sim card.) press power butt and camera but and reset gumb with your styls...! you will receive 3 color display, and then it will say loading,then cheching ...and than finaly install by presing (just press power butt) after finish install press reset buton again...and thats it...! make sure to have proper rom radio..! rom installation is pretty much same as rom install...! i think i helped you...
Related
Hi, All
I have HTC Tornado (Dopod 577W).
I have read topic about Hard Reset using "Clear Storage" app.
I am able to start Windows, can run Start menu, but I can't start any app from there. Therefore I can't run "Clear Storage" app.
Does anybody know how to make hard reset using buttons combination?
Thank you, prompt reply would be appreciated
Turn you phone off.
Press and hold the two softmeny buttons (those 2 placed to the left and right direct under the display) while you press on/off button for about 0.5 seconds. Make sure you still have the soft buttons pressed when release the on/off button.
After a few seconds a text will appear in the display telling you to press "0" (zero) to make an hard reset.
/Bladh
You should have seen the buttons presses needed to hard reset a HTC Wizard :lol: Had to hold 3 buttons while pressing the soft reset button :lol:
You could almost do it accidentally :lol:
Thanks to all
But probably I have very serious problem,
I tried to make soft-reset pressing 2 soft-buttons and shortly pressing Power, after that I saw black screen with message "press 0 ...". I pressed 0 but I saw just Operator Logo again (Dopod Enjoy Mobility). Device is hung again at Operator Logo
I tried several times but can't get success.
Does anybody know how to make it live again?
Thanks.
notmaxx said:
Does anybody know how to make it live again?
Thanks.
Click to expand...
Click to collapse
i'm using an imate SP5, i would just download the ROM from clubimate and flash the device.
Can you get a ROM updater from your telco's website ?
Thank you for your help.
There is no any update for Dopod. I have checked their site just week ago.
I have already found 2 another RUUs for HTC Tornado:
1. i-mate_SP5_RUS_1.5.332.1
2. Cingular 2125 Software Update
But I don't know if I may use them and not to harm my smartphone (I have Dopod 577W). Besides, these two updates are .exe-files and I need to install them via ActiveSync. But ActiveSync can't be enabled (because I can't load OS) therefore I unpacked them and I am going to load nk.nbf via TTY.
Will it work?
notmaxx said:
Thank you for your help.
There is no any update for Dopod. I have checked their site just week ago.
I have already found 2 another RUUs for HTC Tornado:
1. i-mate_SP5_RUS_1.5.332.1
2. Cingular 2125 Software Update
But I don't know if I may use them and not to harm my smartphone (I have Dopod 577W). Besides, these two updates are .exe-files and I need to install them via ActiveSync. But ActiveSync can't be enabled (because I can't load OS) therefore I unpacked them and I am going to load nk.nbf via TTY.
Will it work?
Click to expand...
Click to collapse
you can still install these updates through the bootloader. load up the 3color screen and as long as it says usb in the corner, the update package will find it and install without an activesync connection.
Thanks a lot Dave106!
It works! But it reports about bad vendor ID. As I know I need to change CID (CDL_xxxx).
Does anybody know CID for Dopod 577W?
hello,
I've tried to install skype ona my cingular 2125 and now it doesn't work.
the phone just stuck on .cab extractin screen and i restart it.now the only thing it show is the cingular startup screen and that's all.I have the cingular rom update uttility but it says that the device is not connected to the pc using usb,and ask me to check the connection.
what i can do about this issue?can anyone help me?
thank you in advance
Try turning off USB connection in activesync. With the phone turned off, if you hold the camera button when you plugin the usb to phone (already connected to PC), it should start up in the bootloader.
Other method to get the bootloader is to hold the camera and the comm manager button and turn on the phone.
You should be able to use the ROM update utility with the bootloader.
Look at Karhoe's guide in the stickies at the top of this forum...
Maybe hard reset will be enough ?
Turn off Your phone. Press and keep hold of both soft keys, press the power button for approximately 0.5 to 1 second, phone will ask U if U are sure, press 0.
hard reset is a lot safer than reflash...
i can't believe
thank you for all the advises but unfortunateli non of them helps.I've trie everything and it still shows cingular's wellcome screen and that is all.after that the only thing i can do is to remove the battery because nothing else work.I put the original rom from cingular and everything was OK with the setup, but after that -the same.I've tried with this hard reset- the same.probbably the nezt thing that i will do is to hit it into the ground )
mi4 said:
I put the original rom from cingular and everything was OK with the setup, but after that -the same.
Click to expand...
Click to collapse
Missunderstanding here
Our goal was making Your phone alife again.
None of mentionated procedures could help with some unknown to us bug in Your version of 3-rd party software
The latest skype works perfectly for me, in WM5 and WM6, since you are going to hard reset, why not perform a WM6 upgrade?
re
I was tried to reflash with the original aku2 rom from htc/cingular (the flash was successfull)but after that the phone is still not working.allways the same- cingular's startup screen and that's all.also try with hard reset with no success.I doubt that this phone will ever work again.or if there is another way to "clean" the whole memory?!is it possible to hardware reset the phone?
Format BINFS and reflash, that will clean everything except the IPL and SPL
I flashed my Qtek 9100
i followed the instruction
but now it freez in boot page
MY IPL 2.21.001
SPL 2.21.0lip
OS 6.1.1
Please need help
did you try hard resetting? press power on the top. and turn back on after a moment. then try soft resetting.
yes i tried it but stil freez in boot page
IPL 2.21.001
SPL2.21.0lip
GSM02.25.11
OS 6.0.0.1
please any help
MY PDA doesnt connect with my pc anymore
did you flash it right step by step? things should be alright if you did. if you did, try reflashing with different rom. hopefully you didn't cidunlock it wrongly.
No Free CID-Unlock for G4! Ignore what longjuanfeng say.
Now, get your Qtek stock ROM and flash it, then you will get your orginal OS back.
Then, get another WM6 ROM, HardSPL/SoftSPL your device and try flashing again.
I hope you didn't use ShellTool to flash your G4 device. As it is proven unstable. As you are using HardSPL, you should use RUU to flash your Wizard directly.
Hallo
Can you please Tell me where i can get my Qtek Rom?
When i turn the PDA on it Stay in the boot image Freez that all
but if i boot it into SAFE MODE i get 3 colors i think there is oplossing isnt it ?
cyberbot said:
Hallo
Can you please Tell me where i can get my Qtek Rom?
When i turn the PDA on it Stay in the boot image Freez that all
but if i boot it into SAFE MODE i get 3 colors i think there is oplossing isnt it ?
Click to expand...
Click to collapse
You need to read the wiki!!! The answers to all your questions are right here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Hello
thanks for the help
i have Tried to get the old image back
now my PDA start normal but it stay in one page Called Align Screen(i installed Love them before )
it Said ( Tap the Target Firmly and Accurately at each location on the screen, the Target wil continue to move until the screen is aligned ).
i have tried it like 5 times but it doesnt reacte like making joke with my self
cyberbot said:
Hello
thanks for the help
i have Tried to get the old image back
now my PDA start normal but it stay in one page Called Align Screen(i installed Love them before )
it Said ( Tap the Target Firmly and Accurately at each location on the screen, the Target wil continue to move until the screen is aligned ).
i have tried it like 5 times but it doesnt reacte like making joke with my self
Click to expand...
Click to collapse
Try to hard reset it and see what that does.
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, contintue to hold the two side buttons until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
i did what you said i have seen formate complet FTA ect...
Now i get in the Windows Welcome Tap the screen to set up your Windows mobile based device if i click there i be direct to the same ex page with move the tap ect...........
i have notice my OS number has been changed from 6.0.0.1 into 2.0.1
cyberbot said:
i did what you said i have seen formate complet FTA ect...
Now i get in the Windows Welcome Tap the screen to set up your Windows mobile based device if i click there i be direct to the same ex page with move the tap ect...........
i have notice my OS number has been changed from 6.0.0.1 into 2.0.1
Click to expand...
Click to collapse
The screen still won't align? Is that correct?
yes it asked me to keep clicking to be algined
I would try this, post #3 is what you want to look at. Hopefully this will work.
http://forum.xda-developers.com/showthread.php?t=347539
Thansk so much
you saved my ass
it worked
but i just got email from reset factory emails
Here are your activation details:
Activated Product: Mobile Magnifier Pocket
Activation Date: 3/3/2008
Expiration Date: 4/2/2008
Activated Product: Mobile Speak Pocket
Activation Date: 3/3/2008
Expiration Date: 4/2/2008
what i understand that my Device will lock after one months in trial
How can i Active my Device?
And Also if i trired to Edit My contact it said they are locked and need to update the RADIO
nay help please?
Hi everybody,
i got a XDA Orbit 2 and today i tried to install SPB Phone Suite.
During install it asked for a Softreset, which i did...
After that i refused to boot and keeps hanging at the o2 Bootscreen.
It totally freezes, regardless if i pull any cable, remove the sd-card etc..
So i thought i'd a hardreset once again, but that one didnt work at all.
The Restore lasts maybe 10 secs (with and without sc-card), then asks for another boot and im again where i startet, the o2 bootscreen.
Any chance i get it working again?
Like somebody else recommended flashing it with either another rom or the original one, which i might d/l somewhere.
Then again, any Flash-HowTo starts with an ActiveSync Connection.
Since my Device wont boot at all, the ActiveSync Connection wont be established...
Any helpful Advise highly appreciated :-/
regards...
You should be able to manually put it into the boot loader. I'm not familiar with you phone so you will need to research that.
***Update**** Try this; "turn your phone on press and hold the two buttons on the upper left and right side from your naviwheel and press the resetbutton with your stylus"
http://forum.xda-developers.com/showthread.php?t=366303
hrm, pressing the upper left/right buttons and reseting it doesnt do anything.
regarding google im the first human ever trying to get the htc touch cruise into bootloader mode.
i keep researching, thx for ur effort tho
Manually getting into the boot loader will allow to establish a link to your PC in order to re-flash. Like I said, I'm not familiar with your phone....
yup, i noticed some more users here own an Orbit2.
So i hope somebody is able to enlighten me, before i brake my fingers while trying to press all buttons same time and then somehow hit the reset button, hehe.
ok, i managed to get into bootloader.
some more detailed research helped me there, actually inside this board :-/
now lets see if HardSPL makes me happy.
tx again for ur time
I have an Orbit 2,
To Hard reset and delete everything from your phone and then let the rom reload everything back to factory settings, do the following.
1. Remove SD card
2. Hold down the 'Windows Icon' Button and the 'OK' button at the same time and keep them held in.
3. While still holding in the above 2 buttons, use the stylus and press the reset button in and then release it but you must still keep the 'Windows' button and the 'OK' button still in until you are prompted with a menu.
4. Once the menu appears: press 'Send' button to reset and reload rom or any other button to cancel.
I have done this procedure a few times now and is quite safe, especially after loading a crap piece of software that totally knackers up my Orbit 2.
I hope this helps you out........
Good luck
Tried that before and it worked out before also.
This Time the complete recover-process lasts only 10 seconds and then the Boot doesnt work anymore either.
Dunno why the hardreset aint working anymore.
Regarding the Flashing:
I managed to get into Bootloader and see the following Information:
POLA200
SPL-1.25.0000
CPLD-2
Serial.
Then i plug in the USB-Cable and start the Update-Utility.
After following each step i get the following error:
Error 262: Update Error
Saying it has encountered communication Errors and asks me if i want to recover...
Im running VistaSP1, maybe thats a reason?
Try this for your Vista issue. It worked for me the first time. Although I don't know if SP1 has any effect.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27 This was for Hermes also....
Updating the USB-Driver didnt help .
Using a XP VirtualPC didnt work out either, hehe.
Ill try tomorrow on a XP Machine, thanks for ur time once more.
Im not that desperate anymore, hehe.
Damn, now im using a Windows XP Machine (incl. all Updates) with ActiveSync 4.5, and still get the [262] Update Error.
Seems its seriously damaged :-(
One Question:
Did you installl phone-suite on a cooked rom, or on the original o2 rom?
i got the same freezing problem on my touch with a cooked rom. with the original rom i got no problems.
..
ploep said:
Hi everybody,
i got a XDA Orbit 2 and today i tried to install SPB Phone Suite.
During install it asked for a Softreset, which i did...
After that i refused to boot and keeps hanging at the o2 Bootscreen.
It totally freezes, regardless if i pull any cable, remove the sd-card etc..
So i thought i'd a hardreset once again, but that one didnt work at all.
The Restore lasts maybe 10 secs (with and without sc-card), then asks for another boot and im again where i startet, the o2 bootscreen.
Any chance i get it working again?
Like somebody else recommended flashing it with either another rom or the original one, which i might d/l somewhere.
Then again, any Flash-HowTo starts with an ActiveSync Connection.
Since my Device wont boot at all, the ActiveSync Connection wont be established...
Any helpful Advise highly appreciated :-/
regards...
Click to expand...
Click to collapse
how did you get it in to boodloader mode please
HTC Touch Cruise ROM on O2 Orbit 2
Hi,
Sorry for posting on this thread which might be the wrong place but hope someone ccan help.
Can I install an HTC Cruise ROM (WM 6.1 from HTC website) on my Orbit 2 ?
i hope u answer my request !
i found u the smartest person in this forum !
i have jamin after upgrading from a k-jam rom
it cuts in the middle of the uprade!
when i turn it on the LCD flash for one second
and then turn off
also i cannt enter bootloader to flash another rom
now my jamin is completely dead
hope to help me i am only a starter
well 24 views and no reply
plz guys dont let me down
Is your battery is well charged when the screen was flashing and turning Off ?
100%100 yes my battary is comletely ful
Why on earth did you try to flash a Jamin with a K-jam rom?
Are you able to get into bootloader ie. hold down the COMM button and press the soft reset?
If you can get into the bootloader your phone can be saved, and I would advise you to have a deep read of the WIKI page.
Dixiesmu said:
Why on earth did you try to flash a Jamin with a K-jam rom?
Are you able to get into bootloader ie. hold down the COMM button and press the soft reset?
If you can get into the bootloader your phone can be saved, and I would advise you to have a deep read of the WIKI page.
Click to expand...
Click to collapse
Try Doing Hard Reset by Pressing camera, comm manager, power & soft reset button.
if successfull then try entering bootloader mode.
Thanks.
try removing the battery n hard reset ...... connect it to pc n sync(if device do not go to bootloader directly) download bikertibi's ROM
flash it......
REMEMBER use hard spl for ur version(g4 or g3) be4 flashing .....
if it directly goes to bootloader let me know
don't wry....... cheers!
Aju
the same problem with my prophet
i sent twice in the forum once in this topic
http://forum.xda-developers.com/showthread.php?t=319636&page=3
after going with the steps in it without any result
and once in a separate topic
http://forum.xda-developers.com/showthread.php?t=632446
without any response till now
i hope some one here in this topic can help?
Cutten USB works only for the g3 chipsets...
Well just connect to pc by USB and make it in bootloader